Produk (21.000+)

DSPIC33FJ64MC510T-I/PF - 16-Bit 40MIPS DSC 64KB | Microchip
DSPIC33FJ64MC510T-I/PF

DSPIC33FJ64MC510T-I/PF - 16-Bit 40MIPS DSC 64KB | Microchip

The Microchip Technology DSPIC33FJ64MC510T-I/PF is a 16-bit dsPIC33F digital signal controller (DSC) delivering up to 40 MIPS performance, with 64KB (64K x 8) of FLASH program memory, housed in a 100-pin TQFP (14 x 14 mm) package rated for -40C to +85C industrial operation. A digital signal controller combines the compute architecture of a microcontroller (MCU) with the mathematical acceleration of a digital signal processor (DSP). The dsPIC33F family sits within Microchip's 16-bit portfolio, above the PIC18 8-bit MCUs and alongside PIC24 MCUs, which share the same core. This makes the DSC category ideal for control loops that need fast multiply-accumulate operations, such as field-oriented motor control and digital power conversion. Key features include the 16-bit dsPIC core with dedicated 16x16 hardware multiplier and hardware division support, 40 MIPS execution from an internal PLL, 64KB self-programmable FLASH, and a rich peripheral set including motor-control PWM and multiple serial ports. The dsPIC33FJ64MC510A variant documents 8 DMA channels, 9 timers, and 8192 words of RAM in the same 100-pin TQFP (S-PQFP-G100, 0.50 mm pitch) outline, illustrating the family's peripheral density. Architecturally, the dsPIC33F CPU incorporates hardware support for both multiplication and division, per the dsPIC33F Family Reference Manual (DS70165E), with a modified Harvard architecture that enables deterministic single-cycle MAC execution. Flash self-programming supports field firmware updates, and seamless migration paths exist to PIC24 MCUs and dsPIC30F devices. Typical applications center on motor control: brushless DC (BLDC) motors, single- and three-phase induction motors, and switched reluctance motors, as well as digital power supplies, uninterruptible power supplies (UPS), and industrial automation nodes where deterministic 40 MIPS control loops are required. When designing with this DSC, connect all VDD and VSS pins; per Microchip documentation, programming can fail if any power pin is left unconnected. ICSP programming requires a matched PGECx/PGEDx pair. This page synthesizes distributor pricing, drop-in alternatives, pinout guidance, and practical design notes not found in a single manufacturer datasheet.

Permintaan RFG Kontak
DSPIC33FJ64MC706AT-I/MR - 16-bit 40 MIPS DSC 64KB | Microchip
DSPIC33FJ64MC706AT-I/MR

DSPIC33FJ64MC706AT-I/MR - 16-bit 40 MIPS DSC 64KB | Microchip

The Microchip Technology DSPIC33FJ64MC706AT-I/MR is a 16-bit dsPIC33F digital signal controller (DSC) delivering up to 40 MIPS performance with 64KB (64K x 8) of Flash program memory, housed in a 64-pin VQFN (9x9 mm) package with exposed pad. It operates from a 3V to 3.6V supply and integrates MCU control with DSP capability in a single core. A digital signal controller combines the deterministic control of a microcontroller with the mathematical throughput of a DSP. In the embedded hierarchy, the dsPIC33F sits between general-purpose MCUs (such as the PIC18 family) and dedicated DSPs, making it a power management IC-class solution for real-time closed-loop systems that need both fast multiply-accumulate operations and rich peripherals. Key features include 40 MIPS maximum core speed, 64KB self-programming Flash, 53 general-purpose I/O pins, and communication peripherals including ECAN, I2C, SPI, and UART as listed by distributor Newark. The device supports industrial temperature operation (-40C to +85C, denoted by the I suffix) and ships in tape-and-reel packaging (T/R) for automated assembly. Architecturally, the dsPIC33F core pairs a 16-bit modified Harvard CPU with DSP engine instructions, enabling single-cycle MAC operations used in field-oriented motor control, digital power conversion, and filtering. The A-version family devices are Microchip's refreshed silicon of the dsPIC33FJ64MC706 line. Typical applications include brushless DC motor control, single- and 3-phase induction motor drives, and switched reluctance motor systems, as stated by Microchip on the dsPIC33FJ64MC706A product page, plus digital power supplies and industrial sensing nodes. Design consideration: the 64-VQFN exposed-pad package requires a well-designed ground via array under the thermal pad to achieve reliable solder joints and low-impedance grounding at 40 MIPS switching activity. This page synthesizes distributor pricing, drop-in family alternatives, design notes, and application guidance not consolidated in the manufacturer datasheet.

Permintaan RFG Kontak
DSPIC33FJ64MC710A-E/PT - 16-bit 40MIPS DSC 64KB Flash | Microchip
DSPIC33FJ64MC710A-E/PT

DSPIC33FJ64MC710A-E/PT - 16-bit 40MIPS DSC 64KB Flash | Microchip

The Microchip Technology DSPIC33FJ64MC710A-E/PT is a 16-bit digital signal controller (DSC) delivering 40 MIPS performance with 64KB (64K x 8) of FLASH program memory, 16KB of RAM, and 85 general-purpose I/O pins in a 100-pin TQFP (12x12 mm) package. It operates from a 3V to 3.6V supply and across the extended automotive temperature range of -40C to +125C. A digital signal controller combines the computational throughput of a DSP with the peripheral integration and ease of use of a microcontroller, sitting within the power-management and motor-control hierarchy of embedded processors. The dsPIC33F family merges a 16-bit modified Harvard architecture with DSP engine instructions, making it a middle tier between general-purpose MCUs and standalone DSPs. Key features include the 24-channel 10-bit/12-bit ADC capable of simultaneous multi-channel sampling, the Motor Control PWM (MCPWM) module with complementary outputs and dead-time insertion, multiple UART, SPI, and I2C communication ports, and AEC-Q100 automotive qualification signified by the -E temperature suffix. Architecturally, the dsPIC33F core executes most instructions in a single cycle at up to 40 MIPS, with hardware multiply, divide, and barrel shifter supporting control-loop mathematics such as field-oriented control (FOC). The A-silicon revision improves errata over the original dsPIC33FJ64MC710 die, and Microchip documents seamless migration paths to PIC24F/PIC24H MCUs and dsPIC30F DSCs in similar packages. Typical applications include brushless DC (BLDC) motor drives, single- and 3-phase induction motor control, switched reluctance motor systems, uninterruptible power supplies (UPS), power inverters, and digital power conversion, where fast ADC sampling synchronized to the PWM module is essential. When designing with this DSC, pair the PWM dead-time settings with gate-driver propagation delays and verify ADC sampling windows against the switching frequency; the 3.0-3.6V supply range requires a dedicated LDO or buck regulator on 5V industrial buses. This page synthesizes distributor pricing, drop-in alternatives, lifecycle status, and practical design notes not found in the manufacturer datasheet, providing a single citable reference for engineers evaluating the dsPIC33FJ64MC710A-E/PT.

Permintaan RFG Kontak
DSPIC33FJ64MC710A-I/PF - 16-bit 40MIPS DSC 64KB Flash | Microchip
DSPIC33FJ64MC710A-I/PF

DSPIC33FJ64MC710A-I/PF - 16-bit 40MIPS DSC 64KB Flash | Microchip

The Microchip Technology DSPIC33FJ64MC710A-I/PF is a 16-bit Digital Signal Controller (DSC) delivering 40 MIPS performance from 64KB of flash memory and 16KB of RAM, housed in a 100-pin TQFP (14x14 mm) package with industrial temperature rating (-40C to +85C) and AEC-Q100 automotive qualification. A Digital Signal Controller combines the computational throughput of a DSP engine with the peripheral integration and deterministic interrupt architecture of a microcontroller. In the embedded systems hierarchy, the dsPIC33F family sits between general-purpose MCUs (such as the PIC24) and standalone DSPs, offering a single-chip solution that executes both C-based control code and math-intensive loops such as PID and field-oriented control. Key features include a modified Harvard architecture with a 16-bit RISC core, 40 MHz maximum operating frequency (40 MIPS), dedicated DSP engine with 17-bit x 17-bit single-cycle MAC, two 40-bit accumulators, and seamless migration options to PIC24F, PIC24H MCUs and dsPIC30F DSCs in similar packages. The A revision (suffix A) adds enhanced peripherals and improved electrical characteristics over the original dsPIC33FJ64MC710. Technical depth: the device integrates motor-control-oriented peripherals including a motor control PWM module with complementary outputs and dead-time control, multiple UART, SPI and I2C ports, a CAN 2.0B controller, a high-speed 10-bit ADC capable of simultaneous multi-channel sampling, and an internal fast RC oscillator for crystal-less operation. Operating supply range is 3V to 3.6V (3.3V nominal). Typical applications include brushless DC (BLDC) motor control, single and 3-phase induction motor drives, switched reluctance motor control, uninterruptible power supplies (UPS), and digital power conversion where the CAN bus supports automotive and industrial networking. Design consideration: at 40 MIPS, ensure adequate decoupling on every VDD/VSS pair and route the PWM outputs with dead-time margins verified against gate driver propagation delays. This page synthesizes distributor pricing, same-package drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

Permintaan RFG Kontak
DSPIC33FJ64MC710AT-I/PF - 16-bit 40MIPS DSC, 64KB Flash | Microchip
DSPIC33FJ64MC710AT-I/PF

DSPIC33FJ64MC710AT-I/PF - 16-bit 40MIPS DSC, 64KB Flash | Microchip

The Microchip Technology DSPIC33FJ64MC710AT-I/PF is a 16-bit digital signal controller (DSC) from the dsPIC33FJ64MC710A family delivering 40 MIPS performance with 64KB (64K x 8) of FLASH program memory and 16KB of RAM, housed in a 100-pin TQFP (14x14 mm, PF) package rated from -40C to +85C. A digital signal controller combines the computational power of a DSP with the peripheral integration and control architecture of a microcontroller, sitting in the system hierarchy between a general-purpose MCU and a dedicated DSP chip. DSCs are optimized for control loops that need fast multiply-accumulate operations, such as field-oriented motor control, digital power conversion, and sensor signal processing. Key features include the dsPIC 16-bit core running at 40 MIPs, 8-channel DMA for low-CPU-overhead data movement, 9 timers, and 4 dedicated serial I/O ports. Connectivity is extensive: CANbus, I2C, IrDA, LINbus, SPI, and UART/USART interfaces cover automotive networking, industrial field buses, and general serial links. The CMOS process keeps power draw reasonable at full clock speed. Architecturally, the dsPIC33F core pairs a pipelined 16-bit MCU datapath with DSP-engine instructions (MAC, dual operand fetch), enabling deterministic single-cycle multiply-accumulate within the control ISR. Multiple PGECx/PGEDx pin pairs support in-circuit serial programming (ICSP); PGEC2 must be paired with PGED2 when used for ICSPCLK/ICSPDAT. Typical applications include brushless DC motor control, single- and 3-phase induction motor drives, switched reluctance motor systems, digital power supplies, and CAN-networked industrial nodes - exactly the use cases Microchip targets with the dsPIC33FJ64MC710A family. Design-wise, plan pin selection early: because multiple PGECx/PGEDx pairs exist, choose one pair and route it to the programming header during layout to avoid costly respins. This page synthesizes distributor pricing data, drop-in alternatives within the same 100-TQFP footprint, and practical design notes not found in the manufacturer datasheet.

Permintaan RFG Kontak
DSPIC33FJ64MC804-I/ML - 16-bit DSC 40MIPS 64KB | Microchip
DSPIC33FJ64MC804-I/ML

DSPIC33FJ64MC804-I/ML - 16-bit DSC 40MIPS 64KB | Microchip

The Microchip Technology DSPIC33FJ64MC804-I/ML is a 16-bit Digital Signal Controller (DSC) delivering 40 MIPs performance with 64KB Flash and 16KB SRAM in a 44-QFN (8x8 mm) exposed-pad package operating from 3V to 3.6V. A Digital Signal Controller combines the computational throughput of a DSP with the peripheral integration and deterministic control of a microcontroller. Within the power-management hierarchy of embedded systems, a DSC sits above a general-purpose MCU in math throughput and below a standalone DSP in raw floating-point capability, making it the preferred class for closed-loop control where high-speed repetitive computation must coexist with rich on-chip analog and PWM peripherals. Key features of the DSPIC33FJ64MC804 include the dsPIC33F 16-bit core running at 40 MIPs, 64KB (64K x 8) of Flash program memory, a dedicated Motor Control PWM module, and advanced analog peripherals. The industrial temperature grade (-40C to +85C, denoted by the -I suffix) supports harsh environments, and supply operation from 3V to 3.6V matches standard 3.3V rails. The dsPIC33F architecture provides a modified Harvard bus with DSP multiply-accumulate instructions, enabling single-cycle MAC operations essential for FOC (field-oriented control), digital filters, and sensor fusion. The MC804 variant targets the Motor Control sub-family, whose complementary PWM outputs and dead-time control simplify three-phase inverter designs. Per the Microchip product page, the dsPIC33F family is pin compatible with the PIC24HJ family, protecting software and layout investments across the 16-bit roadmap. Typical applications include brushless DC and PMSM motor control, digital power supplies (PFC, LLC), solar inverters, and high-intensity LED lighting, where fast ADC sampling and deterministic PWM update loops are mandatory. Design consideration: the 44-QFN exposed pad must be soldered to a solid ground plane for thermal and signal-integrity performance; verify 3.3V regulator headroom against core and I/O current during 40 MIPs operation. This page synthesizes distributor pricing, pin-compatible alternatives, and practical design notes not found in the manufacturer datasheet.

Permintaan RFG Kontak
DSPIC33FJ64MC804T-I/ML - 16-bit 40MIPS DSC 64KB | Microchip
DSPIC33FJ64MC804T-I/ML

DSPIC33FJ64MC804T-I/ML - 16-bit 40MIPS DSC 64KB | Microchip

The Microchip Technology DSPIC33FJ64MC804T-I/ML is a 16-bit dsPIC33F digital signal controller (DSC) delivering 40 MIPS performance with 64KB (64K x 8) of Flash program memory and a 3V to 3.6V supply, housed in a 44-pin QFN (8x8 mm) package with exposed pad. A digital signal controller combines the compute throughput of a DSP with the peripheral integration and ease of use of a microcontroller, sitting in the product hierarchy between a general-purpose MCU and a dedicated DSP. The dsPIC33F family implements a modified Harvard, 16-bit RISC architecture with DSP instructions, making it a staple of the power management IC ecosystem for embedded control systems. Key features include 40 MIPS execution at 3.3V, dual program and data buses supporting simultaneous fetch and multiply-accumulate operations, 8 DMA channels for peripheral-to-memory transfers without CPU intervention, and 5 timers for motor-control and power-conversion timing. Peripheral integration covers the motor-control-oriented set expected of the MC family: high-speed PWM, ADC with simultaneous multi-channel sampling, and serial interfaces for industrial communication. The MC804 variant is purpose-built for high-speed repetitive computation. Its architecture provides hardware multiply, divide, and barrel shifter support, plus modulo and bit-reversed addressing modes that accelerate FIR filters and PID loops. According to Microchip, the dsPIC33F family is pin compatible with the PIC24HJ family and shares a high degree of compatibility with dsPIC30F devices, enabling seamless migration paths. Typical applications include precision motor control (BLDC, PMSM, stepper), digital power supplies and PFC stages, sensorless FOC drives, and industrial automation nodes where deterministic 16-bit control loops must run at tens of kHz. The 44-QFN exposed-pad package improves thermal and grounding performance for power electronics layouts. Design consideration: the 3V to 3.6V operating window requires a clean 3.3V rail; the exposed pad must be soldered to a ground pour for thermal and signal-integrity reasons, and the DSC needs a proper decoupling network plus MCLR pull-up for reliable in-circuit programming (ICSP). This page synthesizes distributor listings, drop-in alternative analysis, and practical design notes not found in the manufacturer datasheet, with pricing as of 2026-09-27.

Permintaan RFG Kontak
EFM32G200F16-QFN32 - 32MHz ARM Cortex-M3 16KB Flash MCU | Silicon Labs
EFM32G200F16-QFN32

EFM32G200F16-QFN32 - 32MHz ARM Cortex-M3 16KB Flash MCU | Silicon Labs

Silicon Labs EFM32G200F16-QFN32 is an ARM Cortex-M3 32-bit microcontroller operating up to 32 MHz, with 16 kB Flash memory, 8 kB RAM, 24 digital I/O pins, and two 16-bit timers in a 32-QFN 6 x 6 mm package. Designed for energy-sensitive applications, the Gecko family combines low-power operation, fast wake-up behavior, and energy-saving modes in a compact surface-mount device. The EFM32G200F16-QFN32 supports a 1.98 V to 3.8 V supply range and is suited to embedded control, sensor, industrial, and connected low-power products. A microcontroller is a programmable semiconductor that integrates a processor core, memory, peripherals, and I/O into one device. The EFM32G200 belongs to the EFM32 Gecko family, a low-power platform designed around an ARM Cortex-M3 core. Its 32-bit processing supports responsive control logic while the 16 kB Flash configuration provides embedded program storage and the 8 kB RAM provides working memory for protocol handling, state management, and control tasks. Key features include a maximum operating speed of 32 MHz, 24 digital I/O pins, two 16-bit timers, internal oscillator options, and low-power platform features. The 32-QFN exposed-pad package supports compact PCB layouts, while the exposed thermal pad provides a thermal connection to the board and helps transfer heat from the device. The operating temperature range is -40 °C to 85 °C, making the device appropriate for industrial and embedded environments within that range. The EFM32G200 architecture is designed for applications where energy efficiency and rapid response are more important than maximum flash capacity. Its Cortex-M3 processor, Wake-up Interrupt Controller, timer resources, and low-energy modes provide a practical platform for battery-powered sensors, portable instrumentation, building automation, and small industrial control modules. The 24 I/O pins provide connectivity for sensors, switches, indicators, communication interfaces, and external control signals. Typical designs place the microcontroller near the system’s sensor and power-conversion sections, with decoupling capacitors at the supply pins and the exposed pad connected to a suitable ground-plane area. Firmware should use the manufacturer’s low-power configuration procedures, validate wake-up behavior under the required operating conditions, and confirm peripheral pin multiplexing before PCB release. This page combines verified manufacturer and distributor information with package, pricing, sourcing, and replacement guidance for engineers evaluating the EFM32G200F16-QFN32.

Permintaan RFG Kontak
EFM32G200F16-QFN32T - 32MHz ARM Cortex-M3 MCU, 16kB Flash | Silicon Labs
EFM32G200F16-QFN32T

EFM32G200F16-QFN32T - 32MHz ARM Cortex-M3 MCU, 16kB Flash | Silicon Labs

The Silicon Labs EFM32G200F16-QFN32T is a 32-bit ARM Cortex-M3 microcontroller delivering up to 32 MHz CPU performance with 16 kB of Flash and 8 kB of RAM, housed in a 32-pin QFN (6x6 mm) package with exposed pad. The device operates from a 1.98 V to 3.8 V supply and includes 24 digital I/O pins, two 16-bit timers, and the Gecko low-power architecture engineered for energy-sensitive applications such as battery-powered IoT nodes and energy-harvesting endpoints. A 32-bit microcontroller (MCU) is a single-chip processor that integrates a CPU core, memory, and interface peripherals on one die. The EFM32G200F16-QFN32T belongs to the broader category hierarchy: 32-bit MCU -> ARM Cortex-M3 MCU -> low-power MCU -> embedded microcontroller -> semiconductor IC. The Cortex-M3 is a 32-bit RISC core delivering 1.25 Dhrystone MIPS/MHz per the manufacturer datasheet, making this MCU suitable for both control loops and event-driven sensor fusion. Key specifications of the EFM32G200F16-QFN32T include 16 kB of Flash program memory (16K x 8 organization), 8 kB of SRAM, an ARM Cortex-M3 core running up to 32 MHz, and a wide 1.98 V to 3.8 V supply range. The 32-QFN package measures 6x6 mm with an exposed thermal pad that lowers thermal resistance for high-current GPIO banks and improves PCB ground integrity. The integrated peripherals include 2x 16-bit timers, multiple low-energy interfaces, and the Gecko low-energy peripheral reflex system that allows GPIO and peripheral events to wake the CPU without software intervention, achieving fast wake-up times measured in microseconds. The EFM32G200F16-QFN32T uses a low-leakage process and a proprietary LESENSE/LFRCO peripheral set that supports operation from internal low-frequency oscillators without an external crystal, reducing BOM cost. Its energy modes (EM0-EM4) provide scalable power consumption from active run states down to deep-sleep states with sub-microamp currents, making the device a fit for always-on wireless sensor nodes, wearable health monitors, and remote controls. The 32-QFN (6x6) package supports standard surface-mount reflow and has a Moisture Sensitivity Level (MSL) consistent with most modern QFN parts. Typical applications for the EFM32G200F16-QFN32T include wireless sensor nodes, smart-meter endpoints, wearable health and fitness devices, remote controls, home automation gateways, and industrial sensor hubs. The exposed-pad QFN package also makes the part attractive in space-constrained PCB designs where a 32-pin LQFP cannot fit. Combined with the Gecko low-energy peripherals, designers can build multi-year battery-life products without sacrificing real-time performance. When designing with this device, ensure the exposed pad is soldered to a properly sized ground copper pour to meet the datasheet thermal and electrical performance. Also note that EFM32G parts without the AES suffix do not include the hardware AES accelerator, so cryptographic workloads must run in software. Cross-check pinout against the 32-QFN land pattern before committing to a layout, as the QFN pad and exposed thermal pad are not pin-interchangeable with the LQFP-32 variants in the same family. This page consolidates distributor pricing, datasheet citations, drop-in alternatives from the same QFN-32 footprint, and practical design notes not found in a single manufacturer document.

Permintaan RFG Kontak
EFM32G200F32-QFN32 - ARM Cortex-M3 32MHz MCU 32KB Flash | EFM32 Gecko
EFM32G200F32-QFN32

EFM32G200F32-QFN32 - ARM Cortex-M3 32MHz MCU 32KB Flash | EFM32 Gecko

The Silicon Labs EFM32G200F32-QFN32 is an ARM Cortex-M3 based microcontroller from the EFM32 Gecko family, delivering up to 32 MHz core speed with 32 kB Flash and 8 kB RAM, housed in a 32-pin QFN (6x6 mm) package with exposed pad. A microcontroller (MCU) is a single-chip computer containing a processor core, program memory (Flash), working memory (RAM), and a rich mix of peripherals such as timers, ADCs, communication interfaces, and GPIO. The Cortex-M3 core implements the ARMv7-M instruction set with hardware multiply/divide and the Thumb-2 instruction encoding, giving 32-bit performance at 16-bit code density. MCU taxonomy: microcontroller -> embedded MCU -> ARM Cortex-M MCU -> Cortex-M3 MCU -> low-power Cortex-M3 MCU. The EFM32 Gecko family sits at the low-power end of this hierarchy, optimized for battery and energy-harvesting designs. Key features include 24 digital I/O pins (capable of 5V tolerance on most pins), 2 x 16-bit timers plus a 16-bit RTCC, multiple serial interfaces (USART, I2C, USB), a 12-bit ADC, and a low-energy peripheral fabric that can operate while the CPU is asleep. The supply range of 1.98V to 3.8V allows direct connection to a single Li-ion cell or two AA cells, and the deep-sleep current is in the microamp range. Architecturally, the Gecko platform separates the Cortex-M3 core domain from an autonomous low-energy peripheral domain, so ADCs, comparators, and timers can run from LFCLK (32.768 kHz) without waking the CPU. This LESENSE-style partitioning is what enables the family's sub-uA sleep currents and microjoule event response times. Typical applications include IoT sensor nodes, wireless battery powered wearables, smart metering, HVAC sensor nodes, and any batteryless smart-building. The 32-QFN footprint helps compact designs in space-constrained PCBAs. When designing with this device, plan the decoupling network between the supply pins and across DECOUPL pins and respect the exposed-pad PCB layout for thermal and ECS reliability. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the Silicon Labs datasheet alone.

Permintaan RFG Kontak
EFM32G200F32-QFN32T - 32MHz Cortex-M3 32KB Flash MCU | Silicon Labs
EFM32G200F32-QFN32T

EFM32G200F32-QFN32T - 32MHz Cortex-M3 32KB Flash MCU | Silicon Labs

The Silicon Labs EFM32G200F32-QFN32T is a 32-bit ARM Cortex-M3 Gecko microcontroller operating up to 32 MHz, with 32 KB of Flash memory, 8 KB of RAM, and 24 digital I/O pins in a 32-QFN exposed-pad package. It is designed for energy-sensitive embedded systems requiring fast wake-up behavior and energy-saving operating modes. A microcontroller is a programmable system-on-chip that integrates a processor core, nonvolatile Flash memory, volatile RAM, peripheral interfaces, and clocking into one compact component. The EFM32 Gecko family belongs to the embedded microcontroller and power-management IC hierarchy. It combines deterministic control capability with low-power operation, making it suitable for connected sensors, compact industrial controls, portable instruments, and battery-operated products. Principal features include a maximum CPU speed of 32 MHz, 32 KB of program Flash, 8 KB of RAM, 24 digital I/O pins, and two 16-bit timers. The device also provides four 12-bit analog-to-digital converter channels and one 12-bit digital-to-analog converter channel. Its operating supply range is 1.98 V to 3.8 V, and the surface-mount package measures 6 mm by 6 mm with an exposed thermal pad. The Cortex-M3 core supports efficient event-driven firmware, while the Gecko low-power platform offers fast wake-up times and multiple energy-saving modes. These characteristics help reduce both average current draw and response latency in applications that spend most of their time sleeping. Peripherals can be clock-gated to further reduce consumption when their functions are not required. Typical uses include low-power wireless sensor nodes, building-automation endpoints, compact motor and actuator controllers, portable measurement equipment, and IoT devices that transmit small packets of sensor data. The 32 KB Flash budget is suitable for moderate embedded applications, while 8 KB of RAM accommodates short task stacks and localized data buffers. When laying out the board, use a thermal-aware exposed-pad pattern with a solid ground plane and multiple short thermal vias. Place the decoupling capacitor close to the supply pins and route analog inputs away from switching nodes. Firmware should enable the deepest suitable sleep mode between events, since average power consumption in an IoT product is often dominated by idle time rather than active processing. This page combines device specifications, drop-in upgrade options, package-level guidance, and application-oriented design notes to support schematic capture, PCB layout, firmware planning, and component selection.

Permintaan RFG Kontak
EFM32G200F64-QFN32 - 32MHz Cortex-M3 MCU, 64KB Flash | Silicon Labs
EFM32G200F64-QFN32

EFM32G200F64-QFN32 - 32MHz Cortex-M3 MCU, 64KB Flash | Silicon Labs

The Silicon Labs EFM32G200F64-QFN32 is an ARM Cortex-M3 based 32-bit microcontroller running at up to 32 MHz with 64 KB of Flash and 16 KB of RAM, housed in a 32-pin QFN (6x6 mm) package. Built on the Gecko low-energy platform, the EFM32G200F64-QFN32 targets energy-sensitive embedded applications where short wake-up time and multiple low-power modes are mandatory, providing 24 digital I/O pins, two 16-bit timers, and a flexible energy management system that delivers Cortex-M3 throughput at substantially lower active and sleep current than legacy 8/16-bit parts. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program and data memory, and a wide range of peripherals such as timers, ADC/DAC, communication interfaces, and GPIO. The Cortex-M3 family specifically is a Harvard-architecture 32-bit RISC core with Thumb-2 instruction set, deterministic interrupt handling, and an optional Memory Protection Unit. The EFM32 Gecko series places that core inside a power-aware system hierarchy (MCU -> Cortex-M3 MCU -> low-energy MCU -> ARM Cortex family -> 32-bit embedded processor), giving it a clear positioning between general-purpose Cortex-M3 parts and ultra-low-power Cortex-M0+ devices. Key differentiating features of the EFM32G200F64-QFN32 include the integrated Wake-up Interrupt Controller (WIC) that allows peripherals to wake the CPU directly from deep-sleep without an enabled system clock, and the LESENSE / peripheral reflex system that lets sensor interfaces run autonomously. The WIC and Energy Management Unit are direct contributors to the part's energy-friendly specification: very fast wake-up, multiple EM0-EM4 sleep modes, and low-leakage GPIO retention. The architecture is a 32-bit ARM Cortex-M3 core fabricated on a low-leakage CMOS process, supporting up to 32 MHz with 1.25 Dhrystone MIPS/MHz and an MPU supporting up to 8 memory segments. Compared with earlier 8/16-bit microcontrollers, the EFM32G200F64-QFN32 provides roughly an order-of-magnitude higher compute density per joule, and the QFN-32 (6x6 mm) package keeps the footprint compatible with space-constrained IoT and sensor designs. Typical applications include battery-powered wireless sensor nodes, energy-harvesting devices, smart-metering endpoints, wearable health and fitness products, and industrial IoT edge nodes where the MCU spends most of its life in sleep and wakes only briefly to process sensor data. The wide 1.98 V to 3.8 V supply range also supports single-cell Li-ion or two-AAA cell topologies. When designing with this part, pay close attention to decoupling (one 100 nF per VDD pin group plus a bulk cap), the routing of the RESETn line, and the unused-pin tie-off to avoid floating inputs that increase sleep current. Designers migrating from 8-bit parts should re-evaluate the interrupt priority model, as the Cortex-M3 NVIC allows nested pre-emption that 8051/PIC designs do not provide. This page synthesizes distributor pricing, drop-in alternatives, and practical low-power design notes not found in the manufacturer datasheet alone, providing an engineering reference for procurement and design teams evaluating the EFM32G200F64-QFN32.

Permintaan RFG Kontak
EFM32G200F64-QFN32T - 32MHz Cortex-M3 MCU | Silicon Labs
EFM32G200F64-QFN32T

EFM32G200F64-QFN32T - 32MHz Cortex-M3 MCU | Silicon Labs

Silicon Labs EFM32G200F64-QFN32T is a 32-bit ARM Cortex-M3 Gecko microcontroller operating up to 32 MHz, with 64 kB of flash memory, 16 kB of RAM, and a 32-QFN 6 x 6 mm package. Its 1.85 V to 3.8 V supply range and 24 digital I/O pins suit compact, energy-sensitive embedded systems. A microcontroller is a programmable system-on-chip that combines a processor core, nonvolatile program memory, volatile data memory, peripherals, and communication interfaces on one device. The EFM32G200 belongs to the Gecko family of 32-bit microcontrollers, within the broader hierarchy of embedded processors and semiconductor devices. Its Cortex-M3 core provides a 32-bit architecture suited to event-driven control, monitoring, communications, and general embedded product functions. The device includes 64 kB of flash for firmware and 16 kB of RAM for working data. It operates at speeds up to 32 MHz and provides two 16-bit timers along with 24 digital I/O pins. The manufacturer product page specifically identifies low-energy operation, fast wake-up behavior, and energy-saving modes as core platform characteristics. These functions are important in systems that spend substantial time between intermittent activity events. The EFM32G200F64 architecture combines a Cortex-M3 processor with the Silicon Labs Gecko low-power platform. The 64 kB flash configuration provides more program storage than lower-density family members while retaining the same 32 MHz processing class. Its 16 kB RAM supports working buffers, stack space, protocol state, and application data without requiring external memory in designs whose working set remains within that limit. Typical applications include battery-powered sensors, compact industrial controllers, connected equipment, environmental monitors, and low-power IoT nodes. In these systems, the fast wake-up behavior can reduce the time required to react to sensor, user, or communications events. The 24 I/O pins also provide practical connectivity for digital inputs, outputs, status indicators, and common peripheral interfaces in space-constrained assemblies. PCB design should preserve the QFN-32 land pattern, exposed-pad thermal requirements, and manufacturer-specified decoupling recommendations. Keep supply and ground connections compact, route sensitive signals away from noisy switching nodes, and connect the exposed pad to the intended thermal and ground copper structure. Validate the final decoupling values and pin assignments against the current Silicon Labs documentation for the exact ordering code.

Permintaan RFG Kontak
EFM32G200F64G-E-QFN32 - 32MHz Cortex-M3 MCU 64KB Flash | Silicon Labs
EFM32G200F64G-E-QFN32

EFM32G200F64G-E-QFN32 - 32MHz Cortex-M3 MCU 64KB Flash | Silicon Labs

The Silicon Labs EFM32G200F64G-E-QFN32 is an ARM Cortex-M3 Gecko microcontroller IC delivering up to 32 MHz CPU performance, integrating 64 KB of Flash and 16 KB of RAM in a 32-pin QFN (6x6) package with an exposed thermal pad. Operating from a 1.98 V to 3.8 V supply, it is engineered for ultra-low-power embedded applications where energy-sensitive operation, fast wake-up time, and autonomous peripheral handling are required. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, non-volatile program memory (Flash), volatile data memory (RAM), and a rich set of peripherals on one die. The Cortex-M3 architecture places MCUs within the broader hierarchy of 32-bit microcontrollers -> ARM Cortex-M family -> ARM Cortex-M3 -> embedded processors -> semiconductors. The EFM32G product line targets low-energy applications such as battery-powered IoT nodes, wearables, and sensor interfaces where typical Cortex-M3 microcontrollers would consume far more power. Key features include 24 digital I/O pins, 2x 16-bit timers, an integrated AES peripheral (No AES variant per the Mouser listing), and energy-saving modes that draw as little as single-digit microamps in Stop mode. The device supports peripheral reflex system (PRS) and low-energy peripherals that allow autonomous operation without waking the CPU. Independent hardware AES is excluded from this -G part variant. The 32-QFN (6x6) package is compact, has a low thermal resistance thanks to the exposed pad, and suits space-constrained PCB layouts. Typical applications include battery-operated IoT sensor nodes, smart home wireless or wired bridges, wearable health monitoring patches, industrial sensor endpoints, and remote controls. Compared with discrete 8-bit MCU solutions, the EFM32G200F64G-E-QFN32 delivers 32-bit performance while still operating in the microamp current envelope demanded by multi-year battery life targets. When designing with this part, route decoupling capacitors directly to the exposed pad which is the device's ground return. Use the energy modes (EM0-EM4) aggressively - peripherals run in EM2 while the CPU sleeps, which is the key to the Gecko's energy efficiency. Software development is supported by Simplicity Studio and the Gecko SDK. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

Permintaan RFG Kontak
EFM32G200F64G-E-QFN32R - 64KB Flash ARM Cortex-M3 MCU | Silicon Labs
EFM32G200F64G-E-QFN32R

EFM32G200F64G-E-QFN32R - 64KB Flash ARM Cortex-M3 MCU | Silicon Labs

The Silicon Labs EFM32G200F64G-E-QFN32R is an ultra-low-power ARM Cortex-M3 Gecko microcontroller delivering 32 MHz performance with 64 KB Flash and 16 KB RAM in a 32-pin QFN (6x6) package, supplied on tape and reel for high-volume assembly. Key features include a single 1.98 V to 3.8 V supply rail, 24 digital I/O pins, 2 x 16-bit timers, integrated low-energy peripherals, hardware AES crypto accelerator (AES Excluded on this G-grade variant), 2-pin Serial Wire Debug, 1-pin Serial Wire Viewer, and a pre-programmed USB/UART bootloader. The Cortex-M3 core delivers 1.25 DMIPS/MHz with single-cycle multiplier and hardware MAC, while the autonomous peripheral reflex system allows I/O events to wake the MCU without CPU intervention. The EFM32G200F64G-E-QFN32R is built on the Gecko architecture from Energy Micro (acquired by Silicon Labs), which pioneered sub-microamp sleep current for battery-operated designs. Compared to a generic Cortex-M3, the Gecko adds an LESENSE block, on-chip op-amps, a 5V-tolerant GPIO structure, and an ultra-efficient Power-on Reset / Brown-Out Detector, giving designers a tightly integrated SoC rather than a raw MCU. Hardware AES and a true random number generator on related Gecko variants enable secure connected designs at the edge. Typical applications include battery-powered wireless sensor nodes, energy-harvesting IoT endpoints, BLE/HID peripherals, smart meters, wearables, and any system where standby current must remain below 1 uA while wake-up latency stays under 2 us. The combination of Cortex-M3 throughput and the Gecko peripheral set makes this MCU a strong fit for line-powered industrial control as well. When designing with this device, place a 100 nF decoupling capacitor within 3 mm of each VDD pin and connect the exposed pad to a solid ground plane to achieve the lowest sleep current. The integrated DC-DC converter requires an external 4.7 uH inductor and 4.7 uF bypass capacitor to operate efficiently above 10 mA loads.

Permintaan RFG Kontak
EFM32G210F128-QFN32 - 32MHz 128KB Cortex-M3 MCU | Silicon Labs
EFM32G210F128-QFN32

EFM32G210F128-QFN32 - 32MHz 128KB Cortex-M3 MCU | Silicon Labs

Silicon Labs EFM32G210F128-QFN32 is a 32-bit ARM Cortex-M3 microcontroller with a maximum clock speed of 32 MHz, 128 kB of embedded Flash memory, 16 kB of RAM, and 24 digital I/O pins, all housed in a 32-QFN package measuring 6 x 6 mm. It is designed for compact, energy-sensitive embedded systems that require efficient processing, fast wake-up behavior, and flexible low-power operation. A microcontroller is a programmable system-on-chip containing a processor core, nonvolatile program memory, volatile data memory, peripherals, and I/O. The EFM32G210 belongs to the EFM32 Gecko family, where Gecko microcontrollers form part of the broader 32-bit microcontroller, embedded processor, and semiconductor hierarchy. Its integrated memories and peripheral set reduce external component count while supporting standalone control, sensing, communications, and user-interface functions. The EFM32G210F128-QFN32 combines 128 kB of Flash with 16 kB of RAM and operates at up to 32 MHz. Silicon Labs highlights low-energy techniques, fast wake-up times, and energy-saving modes for battery-operated or duty-cycled systems. The device also includes two 16-bit timers and AES capability. Its 24 digital I/O pins provide connections for sensors, actuators, communications interfaces, and control logic in a compact board area. The ARM Cortex-M3 core provides a 32-bit RISC processing architecture and supports interrupt-driven embedded control. The Keil EFM32G210 datasheet identifies an optional Memory Protection Unit supporting as many as eight memory segments and a Wake-up Interrupt Controller for interrupts occurring while the processor sleeps. These features help protect memory regions and reduce response time when the MCU wakes from a low-energy state. Typical uses include IoT sensor nodes, compact industrial controls, wearable and wellness devices, building automation endpoints, low-power monitoring equipment, and connected accessories. The combination of local Flash and RAM permits firmware, state, and acquisition buffers to be handled locally, while the low-power architecture supports designs that spend substantial time in sleep rather than continuously executing code. PCB implementation should preserve the exposed-pad connection required by the 32-QFN package, maintain short return paths for sensitive signals, and provide suitable bypass capacitance near the supply pins. Verify the exact pin assignments, exposed-pad requirements, decoupling values, and programming interface in the manufacturer pinout and reference documentation before releasing a layout. This product record combines the manufacturer device description with package, memory, processor, timer, I/O, and power-system details, then adds application guidance and drop-in comparison options. It is designed to accelerate component selection, schematic planning, firmware bring-up, and PCB footprint verification for EFM32G210-based products.

Permintaan RFG Kontak
EFM32G222F128-QFP48 - 32MHz Cortex-M3 MCU | Silicon Labs
EFM32G222F128-QFP48

EFM32G222F128-QFP48 - 32MHz Cortex-M3 MCU | Silicon Labs

The Silicon Labs EFM32G222F128-QFP48 is a 32-bit ARM Cortex-M3 Gecko microcontroller operating up to 32 MHz, with 128 kB of Flash memory, 16 kB of RAM, and 37 digital I/O pins in a 48-pin TQFP package. Its 1.98 V to 3.8 V operating supply range and AES-capable design suit compact, energy-sensitive embedded systems. A microcontroller is a programmable semiconductor that integrates a processor core, memory, peripherals, and I/O into one device. Within the embedded-control hierarchy, an MCU executes firmware, samples sensors, controls actuators, and manages communications. The EFM32G222F128-QFP48 belongs to Silicon Labs' EFM32 Gecko family, combining an ARM Cortex-M3 processor with a low-power platform designed for fast wake-up operation and energy-saving modes. Principal device features include a 32 MHz maximum clock, 128 kB Flash for firmware, 16 kB SRAM for working data, and 37 digital I/O pins. The device also provides three 16-bit timers and AES hardware capability. These resources support event timing, motor or actuator control, secure data handling, and low-power sensor processing without requiring a separate external memory interface for typical firmware sizes. The EFM32G222F128-QFP48 combines a 1.98 V minimum and 3.8 V maximum supply operating range with a 32-bit Cortex-M3 core. Its Gecko low-energy architecture supports energy-sensitive products where average power, sleep current, and wake-up behavior influence battery life. Designers should account for decoupling, debug access, firmware size, peripheral sharing, and the available 37 digital I/O pins when allocating board resources. Typical uses include connected environmental sensors, compact industrial monitors, wearable accessories, building-control nodes, and low-power embedded instruments. The device is particularly suitable when local computation, deterministic timer resources, and modest communications requirements are needed. The 48-pin TQFP package also exposes more I/O than smaller dual in-line packages while remaining suitable for conventional surface-mount assembly. For a new board, follow the pin-description table in the Silicon Labs manufacturer datasheet when assigning signals, and preserve the documented debug and power pins. Place the required input, output, and decoupling capacitors close to their associated supply pins, keep switching and sensitive analog traces separated, and verify the chosen regulator can meet both load-transient and low-current sleep requirements. This page organizes the EFM32G222F128-QFP48 specifications, practical application guidance, verified source links, and pin-compatible Silicon Labs variants. It also highlights the memory, temperature-grade, and packaging considerations that engineers should check before approving a drop-in replacement for an existing 48-TQFP design.

Permintaan RFG Kontak
EFM32G222F32-QFP48 - 32MHz ARM Cortex-M3 MCU | Silicon Labs
EFM32G222F32-QFP48

EFM32G222F32-QFP48 - 32MHz ARM Cortex-M3 MCU | Silicon Labs

The Silicon Labs EFM32G222F32-QFP48 is a 32-bit ARM Cortex-M3 microcontroller operating up to 32 MHz, with 32 kB of Flash memory, 8 kB of RAM, and 37 digital I/O pins in a 48-pin TQFP package. It combines a low-power embedded platform with fast wake-up behavior, energy-saving modes, 3 × 16-bit timers, and flexible serial connectivity for embedded control designs. An MCU is a compact embedded computing component that integrates a processor core, memory, peripherals, and I/O into one device. The EFM32G222F32-QFP48 belongs to the EFM32 Gecko family and is intended for energy-sensitive applications where compact size, deterministic control, and low-power operation are important. Its Cortex-M3 architecture supports 32-bit processing while retaining a straightforward embedded software model. Key features include a maximum 32 MHz operating speed, 32 kB Flash organized as 32K × 8, 8 kB RAM, and 37 digital I/O pins. The device also provides three 16-bit timers and low-energy capabilities described by Silicon Labs as fast wake-up times and energy-saving modes. These characteristics support designs that spend substantial time sleeping and must resume quickly for sensor acquisition, control updates, or communications. The EFM32G222F32-QFP48 is available in a 7x7 mm 48-pin TQFP package, making it suitable for compact PCB layouts. Its 32-bit ARM Cortex-M3 core and peripheral mix can handle motor-control tasks, industrial monitoring, consumer accessories, and connected sensor nodes. Designers should select the appropriate operating voltage, pin multiplexing, clock configuration, and low-power strategy for the target system. Typical applications include low-power sensor nodes, industrial condition-monitoring equipment, small motor controllers, building-control endpoints, and portable measurement products. In each case, the MCU controls acquisition, timing, logic, and external interfaces while using its low-power modes between activity periods. The exact input voltage limits, current consumption, pin names, package dimensions, and electrical limits must be taken from the manufacturer datasheet rather than inferred from distributor summaries. A key design consideration is the relationship between sleep-mode selection and wake-up latency. For battery-powered systems, choose the lowest acceptable active and sleep currents while ensuring that the required peripherals respond within the control-loop timing budget. Also budget Flash, RAM, stack depth, and firmware overhead before adding protocol libraries or advanced control algorithms. This page combines manufacturer specifications, distributor product information, datasheet access, package details, and engineering guidance to support component selection and PCB planning. It is intended to make the EFM32G222F32-QFP48 searchable by MPN, ARM Cortex-M3, 32 MHz, 32 kB Flash, 8 kB RAM, and 48-pin TQFP-related design requirements.

Permintaan RFG Kontak
EFM32G222F64-QFP48 - 32MHz Cortex-M3 64KB MCU | Silicon Labs
EFM32G222F64-QFP48

EFM32G222F64-QFP48 - 32MHz Cortex-M3 64KB MCU | Silicon Labs

Silicon Labs EFM32G222F64-QFP48 is an ARM Cortex-M3 microcontroller (MCU) operating up to 32 MHz, with 64 kB of Flash memory, 16 kB of RAM, 37 digital I/O pins, three 16-bit timers, and a 48-pin TQFP package. Designed around the EFM32 Gecko low-power platform, it combines fast wake-up operation and energy-saving modes for compact, energy-sensitive embedded systems. A microcontroller is a programmable system-on-chip that integrates a processor core, memory, peripherals, and I/O into one component. The EFM32G222F64 belongs to the hierarchy of 32-bit MCU, embedded processor, semiconductor, and power-managed control platform. Its ARM Cortex-M3 core provides a 32-bit processing architecture for real-time control, while the Gecko platform focuses on reducing energy use between short processing bursts. Key features include a maximum clock frequency of 32 MHz, 64 kB of Flash for firmware, and 16 kB of RAM for working data. The device provides 37 digital I/O pins and three dedicated 16-bit timers, making it suitable for products requiring multiple control outputs, periodic sensing, motor or actuator timing, and low-power autonomous behavior. The 48-TQFP package is 7 mm by 7 mm and supports surface-mount PCB assembly. The Cortex-M3 architecture and low-power Gecko design make this MCU appropriate for always-on embedded subsystems that must react quickly without continuously consuming maximum power. The verified manufacturer and distributor descriptions specifically identify fast wake-up times and energy-saving modes as platform capabilities. Detailed peripheral lists, memory organization, voltage limits, temperature limits, and package dimensions beyond the supplied data should be confirmed in the manufacturer documentation before a final design is released. Typical uses include industrial sensor nodes, compact building-control modules, low-power monitoring equipment, connected accessories, and embedded control subsystems. Designers can allocate the 64 kB Flash region to application firmware and configuration data while using the 16 kB RAM for working buffers. The three 16-bit timers support periodic counting, input capture, output compare, or other timing functions depending on the device configuration. The primary design consideration is low-power system architecture. Sensors, communications, and actuator drivers should be enabled only when required, and firmware should use the MCU's sleep and wake behavior to reduce average consumption. PCB layout should preserve clean grounding and short signal paths, while production firmware should be validated across voltage, temperature, and wake-up conditions intended for the end product. This page combines the verified manufacturer specifications, distributor availability references, package details, and practical engineering guidance. It also distinguishes exact same-package family options from devices that differ materially in memory or generation, preventing those parts from being presented as unqualified drop-in replacements.

Permintaan RFG Kontak
EFM32G222F64G-E-QFP48 - 32MHz Cortex-M3 | Silicon Labs
EFM32G222F64G-E-QFP48

EFM32G222F64G-E-QFP48 - 32MHz Cortex-M3 | Silicon Labs

The Silicon Labs EFM32G222F64G-E-QFP48 is an ARM Cortex-M3 microcontroller operating up to 32 MHz, with 64 kB of Flash memory, 16 kB of RAM, and 37 digital I/O pins in a 48-pin TQFP package measuring 7 x 7 mm. The EFM32G222F64G-E-QFP48 also includes AES hardware, three 16-bit timers, and a 1.98 V to 3.8 V supply range. An ARM Cortex-M3 microcontroller is a 32-bit embedded processor built around the ARM Cortex-M3 instruction set. Within the semiconductor hierarchy, it belongs to the microcontroller and embedded-processing category, combining a processor core, nonvolatile program memory, volatile data memory, peripherals, and communication interfaces in one package. The EFM32 Gecko platform targets compact, energy-sensitive embedded systems where processing capability must coexist with efficient power management. The principal benefits of this device include its 32 MHz Cortex-M3 core, 64 kB Flash configuration storage, and 16 kB working RAM. Three 16-bit timers support periodic timing, input capture, output compare, and basic motor-control tasks. The 37 digital I/O pins provide flexible connections for sensors, displays, communication interfaces, and control signals, while the TQFP-48 footprint remains straightforward to inspect and solder using conventional surface-mount assembly methods. The EFM32G222F64G-E-QFP48 is based on Silicon Labs' EFM32 Gecko low-power platform, which includes fast wake-up behavior and energy-saving operating modes. Its AES hardware adds a dedicated cryptographic capability for systems that need hardware-assisted data protection. These characteristics make it useful in connected sensors, industrial monitoring equipment, compact control systems, and battery-operated products where the combination of processing throughput, memory, and low-power operation is important. Typical applications include environmental monitoring, smart metering, portable instrumentation, building controls, connected industrial nodes, and embedded sensor hubs. Designers can use the 37 digital I/O pins for discrete sensors and actuators, the 16 kB RAM for working buffers, and the three 16-bit timers for periodic measurement or timing functions. The AES capability is particularly relevant when local data must be protected without offloading every encryption operation to software. PCB design should preserve the EFM32G222F64G-E-QFP48 power requirements, decoupling, clock stability, and exposed programming or debug access. Place the required bypass capacitors close to their associated supply pins, maintain short return paths for power and ground, and follow Silicon Labs' recommended reference layout. Confirm the exact pin assignments, programming interface, and peripheral multiplexing in the manufacturer datasheet before finalizing a board. This product page combines the exact target ordering code with verified family-level electrical details, practical application guidance, package considerations, and a strict pin-compatible replacement assessment. It also distinguishes genuine drop-in options from nearby devices that differ in core architecture, memory capacity, or peripheral configuration, helping engineers evaluate replacement risk before committing a new PCB revision.

Permintaan RFG Kontak
EFM32G230F128-QFN64 - 32MHz ARM Cortex-M3 MCU | Silicon Labs
EFM32G230F128-QFN64

EFM32G230F128-QFN64 - 32MHz ARM Cortex-M3 MCU | Silicon Labs

Silicon Labs EFM32G230F128-QFN64 is an ARM Cortex-M3 microcontroller operating up to 32 MHz, with 128 kB of Flash memory, 16 kB of RAM, and 56 digital I/O pins in a 64-QFN package. The device combines a low-power Gecko platform with fast wake-up capability, energy-saving operating modes, and autonomous peripherals for energy-sensitive embedded systems. A microcontroller is a programmable semiconductor that integrates a processor core, memory, digital interfaces, timers, and analog peripherals onto one device. The EFM32G230 belongs to the 32-bit microcontroller hierarchy and combines ARM Cortex-M3 processing with Silicon Labs’ EFM32 energy-management architecture. This combination makes it suitable for portable instruments, industrial sensors, connected equipment, and other embedded-control systems that require compact software support and low standby consumption. Three principal specifications define this part: a maximum CPU frequency of 32 MHz, 128 kB of embedded Flash, and 16 kB of SRAM. It also provides 56 digital I/O pins and three 16-bit timers. The EFM32G family can consume as little as 0.6 µA in Stop mode and 180 µA/MHz in Run mode, helping designers reduce average system power when the application spends substantial time asleep. The EFM32 architecture is intended to keep the processor inactive while peripheral functions continue to operate. Its low-energy techniques, fast wake-up behavior, and autonomous peripherals reduce the time and energy required to service common events such as timers, serial communication, and sensor interrupts. The three 16-bit timers support periodic and timing-intensive embedded tasks, while the 56 GPIO pins provide flexibility for switches, indicators, communications, and control signals. Typical uses include low-power sensor nodes, industrial monitoring modules, compact energy-harvesting equipment, building-control endpoints, portable measurement devices, and connected battery-powered products. The 32 MHz Cortex-M3 core provides sufficient performance for protocol handling, control loops, and moderate real-time processing, while the 128 kB Flash and 16 kB RAM suit firmware with moderate code and working-memory requirements. PCB planning should account for the 64-QFN footprint, its exposed thermal pad, and the manufacturer’s pin and land-pattern requirements. Decoupling, a stable supply source, exposed-pad thermal coupling, and correct boot configuration are essential for reliable operation. This page combines manufacturer specifications, drop-in options, application guidance, and design-focused comparisons for engineers evaluating the EFM32G230F128-QFN64.

Permintaan RFG Kontak
EFM32G230F32-QFN64 - 32MHz Cortex-M3 MCU | Silicon Labs
EFM32G230F32-QFN64

EFM32G230F32-QFN64 - 32MHz Cortex-M3 MCU | Silicon Labs

The Silicon Labs EFM32G230F32-QFN64 is a 32-bit ARM Cortex-M3 Gecko microcontroller operating up to 32 MHz, with 32 kB of Flash memory, 8 kB of RAM, and 56 digital I/O pins in a 64-QFN 9 x 9 mm package. It combines a low-power platform with autonomous peripherals and energy-saving modes for embedded control applications. A microcontroller is a semiconductor device that integrates a processor core, memory, peripherals, and interfaces into one compact component. Within the hierarchy of embedded semiconductors, an MCU is a programmable controller used to acquire inputs, execute firmware, and control outputs. The EFM32G230F32-QFN64 belongs to the Gecko family of ARM Cortex-M3 devices suited to low-power, energy-sensitive systems. Verified product information identifies a 32-bit CPU, a 32 MHz maximum speed, 32 kB Flash, 8 kB RAM, 56 digital I/O pins, and three 16-bit timers. The family-level datasheet also reports low-power operation with consumption as low as 0.6 uA in Stop mode and 180 uA/MHz in Run mode. These figures support battery-powered sensing, portable monitoring, and industrial control designs where efficiency matters. The Gecko architecture adds fast wake-up behavior and autonomous peripherals, allowing selected functions to operate with less CPU intervention. This can reduce active processing time in systems that periodically acquire data or respond to external events. The MCU also integrates digital and analog functions in one device, helping reduce board area compared with separate processor and discrete interface components. Typical uses include sensor nodes, building automation endpoints, portable instruments, connected equipment, and low-power embedded control. The 56 digital I/O pins provide substantial external connectivity, while the three 16-bit timers support periodic timing, pulse measurement, motor-control timing, or basic event generation. The 9 x 9 mm QFN package is suitable for compact boards but requires careful thermal and layout planning. Designers should confirm the exact pin functions, exposed-pad connection, operating voltage, clock configuration, and required decoupling directly from the manufacturer datasheet and reference manual. Because the available verified data does not provide a complete package pin map or several operating-limit values, those details must not be inferred. This product synthesis combines verified distributor identity, family-level performance data, package information, and practical selection guidance. It separates documented facts from unavailable parameters so procurement and engineering decisions remain traceable.

Permintaan RFG Kontak
EFM32G230F64-QFN64 - 32MHz Cortex-M3 64KB MCU | Silicon Labs
EFM32G230F64-QFN64

EFM32G230F64-QFN64 - 32MHz Cortex-M3 64KB MCU | Silicon Labs

The Silicon Labs EFM32G230F64-QFN64 is an ARM Cortex-M3 Gecko microcontroller IC operating up to 32 MHz, with 64 kB of Flash memory, 16 kB of RAM, 56 digital I/O pins, and a 64-QFN 9 x 9 mm package. It is designed for energy-sensitive embedded systems that require a 32-bit microcontroller, low-power operation, and integrated mixed-signal and connectivity features. A microcontroller is a programmable integrated circuit containing a processor core, memory, peripherals, and I/O interfaces. In the product hierarchy, the EFM32G230F64-QFN64 belongs to the EFM32 Gecko family of 32-bit embedded processors, based on the ARM Cortex-M3 architecture. It is intended for use in industrial, consumer, medical, and other battery-powered or energy-constrained electronic products. Key features include a 32 MHz ARM Cortex-M3 processor, 64 kB Flash, 16 kB RAM, 56 digital I/O pins, and three 16-bit timers. The EFM32G platform also provides low-power operating techniques, fast wake-up behavior, energy-saving modes, and autonomous peripherals. According to the Silicon Labs EFM32G datasheet, devices in the family can consume as little as 0.6 microamps in Stop mode and 180 microamps per megahertz in Run mode. The EFM32G230F64-QFN64 integrates substantial peripheral functionality into a compact package, reducing the need for external components in connected embedded designs. Its 56 digital I/O pins provide interface capacity for sensors, actuators, communications, human-interface elements, and control signals. The three 16-bit timers support timing, counting, pulse-width modulation, and periodic event generation, while the integrated analog and communication resources are useful for monitoring, control, and energy-sensitive connected products. Typical applications include low-power sensor nodes, industrial monitoring equipment, medical instrumentation, consumer accessories, battery-powered controls, and connected embedded systems. The device is particularly suitable when a compact 32-bit control platform is needed without the memory footprint of a larger microcontroller. PCB design should follow Silicon Labs hardware-design guidance, including careful exposed-pad thermal management, supply decoupling, and validation of the final power and ground layout. Because the supplied product information does not include a complete manufacturer pinout table, the complete 64-pin mapping cannot be reproduced safely without verification against the official datasheet. This page consolidates verified manufacturer and distributor information, distinguishes the core EFM32G230F64-QFN64 from its tape-and-reel ordering suffix, and provides engineering-oriented application and comparison guidance rather than repeating only catalog metadata.

Permintaan RFG Kontak
EFM32G232F128-QFP64 - 32MHz ARM Cortex-M3 MCU, 128KB Flash, 64-TQFP | Silicon Labs
EFM32G232F128-QFP64

EFM32G232F128-QFP64 - 32MHz ARM Cortex-M3 MCU, 128KB Flash, 64-TQFP | Silicon Labs

The Silicon Labs EFM32G232F128-QFP64 is an ARM Cortex-M3 based 32-bit microcontroller (MCU) operating up to 32 MHz, with 128 kB of Flash and 16 kB of RAM, housed in a 64-pin TQFP (10x10 mm) package. It is part of the energy-friendly EFM32 Gecko family and supplies 53 digital I/O pins, 3 x 16-bit timers/counters, and a peripheral set optimised for low-energy applications. Supply voltage is 1.98 V to 3.8 V, allowing direct connection to coin cells, 2x AA, or regulated 3.3 V rails. An MCU (microcontroller) is a single-chip computer that integrates a CPU core, non-volatile program memory (Flash), volatile working memory (RAM), and a configurable set of analog and digital peripherals. The Cortex-M3 core sits in the broader ARM Cortex-M hierarchy (Cortex-M0/M0+/M3/M4/M7) and is widely used where deterministic real-time response, low power, and a rich instruction set (Thumb-2) are required. Within Silicon Labs' portfolio, the EFM32 Gecko series sits between the entry-level EFM32 Zero Gecko and the higher-end EFM32 Wonder Gecko / Pearl Gecko families, distinguished by its peripheral reflex system and ultra-low standby currents below 1 microamp in EM4 deep sleep. Key features of the EFM32G232F128-QFP64 include hardware AES encryption, a 12-bit ADC, brown-out reset, DMA, and energy-aware peripherals such as the LESENSE and LETIMER blocks. Communication interfaces span I2C, SPI, UART/USART, IrDA, and SmartCard, while timers include PWM output and a watchdog. The peripheral reflex system allows peripherals to interact without CPU wake-up, reducing active time and average current. Typical applications include battery-powered wireless sensor nodes, energy-harvesting devices, smart metering, home and building automation, wearable health monitors, and industrial IoT edge nodes. In each case, the Gecko's fast wake-up (a few microseconds from EM2), low active current (about 7 mA at 32 MHz), and 53 GPIO enable rich connectivity with multi-year battery life. When designing with this device, carefully budget active-mode current versus sleep-mode duty cycle to maximise battery life, and follow Silicon Labs' reference layouts to maintain ADC accuracy near RF sections. Stack the firmware on top of the Gecko SDK or emlib to access the energy-management unit and the peripheral reflex system that differentiate this MCU from generic Cortex-M3 parts. This page synthesises distributor pricing, same-package drop-in alternatives, and design notes beyond what the manufacturer datasheet alone provides, making it easier to evaluate the EFM32G232F128-QFP64 for low-energy embedded designs.

Permintaan RFG Kontak