Produk (21.000+)

EFM32TG110F8-D-QFN24R - 32MHz Cortex-M3 Tiny Gecko MCU | Silicon Labs (Tape & Reel)
EFM32TG110F8-D-QFN24R

EFM32TG110F8-D-QFN24R - 32MHz Cortex-M3 Tiny Gecko MCU | Silicon Labs (Tape & Reel)

The Silicon Labs EFM32TG110F8-D-QFN24R is an ARM Cortex-M3 32-bit microcontroller running up to 32 MHz with 8 KB of Flash and 2 kB of RAM, housed in a 24-QFN (5 x 5 mm) surface-mount package. It is built on Silicon Labs' energy-friendly EFM32 platform, combining a low-power architecture with fast wake-up from energy-saving modes for battery-operated and energy-harvesting designs. A microcontroller (MCU) is a single integrated circuit that contains a processor core, program memory, data memory and a set of dedicated peripherals such as timers, GPIO, serial interfaces and analog blocks. Within the component hierarchy, the EFM32TG110 sits in the ARM Cortex-M3 class of 32-bit embedded processors and in the EFM32 Tiny Gecko family of Silicon Labs low-power MCUs, a line positioned between the larger EFM32 Gecko and the ultra-low-power EFM32 Zero Gecko families for designs where energy cost per data point matters. Key features of this device include an ARM Cortex-M3 core operating up to 32 MHz, 8 KB of Flash program memory organized as 8K x 8, 2 kB of SRAM, 17 digital I/O pins and two 16-bit timers. Silicon Labs specifies run-mode current of 150 uA/MHz and stop-mode current as low as 0.6 uA, which is the core reason the family is popular in coin-cell and sensor-node products. The device also integrates an AES hardware accelerator, analog peripherals including an operational amplifier, and a 2-pin serial-wire debug interface with a separate 1-wire Serial Wire Viewer pin for profiling and trace output. Technically, the Tiny Gecko platform gives the EFM32TG110 fast wake-up times from its deep-sleep states, retention of output state in shutoff mode, and a peripheral set that can operate autonomously. This lets a design sleep at microamp current, wake, sample a sensor, transmit a short packet and return to sleep without the long wake latency typical of generic low-power MCUs, which directly reduces average current in duty-cycled nodes. Typical applications include wireless sensor nodes and IoT end devices, industrial monitoring and metering, battery-powered handheld instruments, energy-harvesting sensors, smart home accessories and small motor or actuator control sub-systems where a full MCU plus glue logic would be over-specified. When designing with the EFM32TG110F8-D-QFN24R, remember that its 2 kB of RAM is the real design constraint: keep stack depth, DMA buffers and protocol buffers lean, and prefer the 8 KB Flash part only for code sizes that genuinely fit. Route the two SWD debug pins to test points so the board can be programmed and profiled in production. This page consolidates device specifications, drop-in alternatives in the same 24-QFN footprint, a parameter-by-parameter comparison, and practical low-power design notes so engineers can qualify the part against a second source and plan a board layout in one pass.

Permintaan RFG Kontak
EFM32TG110F8-QFN24 - 32MHz Cortex-M3 MCU | Silicon Labs
EFM32TG110F8-QFN24

EFM32TG110F8-QFN24 - 32MHz Cortex-M3 MCU | Silicon Labs

The Silicon Labs EFM32TG110F8-QFN24 is an ARM Cortex-M3 microcontroller operating up to 32 MHz, with 8 kB of Flash memory, 2 kB of RAM, 17 digital I/O pins, and a 24-QFN 5 x 5 mm package. It combines a 32-bit RISC core with low-power energy-management techniques, fast wake-up behavior, and energy-saving modes for embedded designs. A microcontroller is a programmable system-on-chip that integrates a CPU, nonvolatile program memory, volatile data memory, peripherals, and I/O into one package. The EFM32 Tiny Gecko family belongs to the hierarchy of embedded processors, microcontrollers, integrated circuits, and semiconductors. It is designed to execute firmware while controlling sensors, communications, user interfaces, and power functions in compact, energy-sensitive systems. The EFM32TG110F8-QFN24 reaches 32 MHz and includes two 16-bit timers, AES and operational-amplifier resources identified by the distributor listings, and 17 digital I/O pins. Its 8 kB Flash supports a modest embedded program image, while 2 kB of RAM provides working memory for control logic and data buffering. The 1.85 V to 3.8 V supply range supports low-voltage embedded systems. The ARM Cortex-M3 processor provides a 32-bit RISC architecture and can achieve as much as 1.25 Dhrystone MIPS/MHz, according to the EFM32TG110 datasheet hosted by Keil. The Cortex-M3 also includes a Memory Protection Unit supporting up to eight memory segments and a Wake-up Interrupt Controller for interrupts generated while the processor sleeps. Typical uses include compact industrial sensors, energy-conscious IoT nodes, wearable accessories, low-power instrumentation, and connected peripherals. Developers can use the 17 available digital I/O pins for sensors, actuators, status indicators, and serial interfaces, while the timers support periodic measurement, timing, or pulse-related tasks. The principal design consideration is the small memory footprint. Firmware must fit within 8 kB of Flash and its working data within 2 kB of RAM, so code size, library use, stack depth, and interrupt handling should be checked early. Hardware design should follow Silicon Labs guidance in AN0002 EFM32 Hardware Design Considerations. This page consolidates verified manufacturer and distributor details, package information, application guidance, and selection considerations. It helps engineers compare the EFM32TG110F8-QFN24 against available alternatives without treating merely similar microcontrollers as verified drop-in replacements.

Permintaan RFG Kontak
EFM32TG110F8-QFN24T - 32MHz Cortex-M3 MCU | Silicon Labs
EFM32TG110F8-QFN24T

EFM32TG110F8-QFN24T - 32MHz Cortex-M3 MCU | Silicon Labs

Silicon Labs EFM32TG110F8-QFN24T is a 32 MHz ARM Cortex-M3 microcontroller with 8 kB Flash, 2 kB RAM, and 17 digital I/O pins in a 24-QFN 5 x 5 mm package. The device operates from a 1.85 V to 3.8 V supply and includes two 16-bit timers, AES hardware, and three operational amplifiers. A microcontroller is an integrated circuit that combines a processor core, program memory, data memory, and peripherals on one semiconductor die. The EFM32TG110 belongs to the Tiny Gecko family of 32-bit embedded MCUs, placing an ARM Cortex-M3 core within the broader hierarchy of microcontroller, embedded processor, and semiconductor devices. Silicon Labs positions this low-power platform for energy-sensitive embedded products that require fast wake-up operation and energy-saving modes. The principal feature set includes operation up to 32 MHz, 8 kB of Flash, 2 kB of RAM, and 17 digital I/O pins. Two 16-bit timers support periodic timing, input capture, output compare, and basic motor or control functions. Integrated AES hardware accelerates cryptographic operations, while the three operational amplifiers reduce the need for external analog signal-conditioning components in suitable low-power measurement circuits. The 1.85 V to 3.8 V operating range permits use from 2 V-class and 3.3 V systems when the individual rail, peripheral, and timing requirements remain within device limits. The 24-QFN 5 x 5 mm package provides a compact surface-mount option for space-constrained products. Because the QFN has no exposed leads, PCB layout must provide adequate solderable land area and careful thermal-via placement beneath the package where appropriate. Typical applications include low-power sensor nodes, compact industrial control modules, battery-operated accessories, small motor-control systems, and embedded instrumentation. The ARM Cortex-M3 architecture provides a familiar software ecosystem, while the 8 kB Flash footprint makes the MCU most appropriate for compact control logic rather than resource-intensive applications. The 2 kB RAM also favors targeted buffering and state management over large data acquisition workloads. Designers should allocate decoupling capacitors close to the supply pins, confirm that every exposed-pad thermal and solder-layout requirement follows the package drawing, and keep analog signals away from fast-switching nodes. The three operational amplifiers and 17 I/O pins should be assigned only after checking the pin-mux limitations, analog operating ranges, and shared peripheral resources in the manufacturer pin description table. This product page consolidates the core MCU specifications, package constraints, application guidance, and validated cross-reference options into one engineering-focused reference. It also highlights memory differences and family considerations that determine whether a candidate can replace the EFM32TG110F8-QFN24T without PCB or firmware redesign.

Permintaan RFG Kontak
EFM32TG11B120F128GM32-BR - 48MHz Cortex-M0+ 128KB Flash MCU | Silicon Labs
EFM32TG11B120F128GM32-BR

EFM32TG11B120F128GM32-BR - 48MHz Cortex-M0+ 128KB Flash MCU | Silicon Labs

The Silicon Labs EFM32TG11B120F128GM32-BR is an ARM Cortex-M0+ Tiny Gecko 1 microcontroller running at 48 MHz with 128 KB of flash and 32 KB of RAM, housed in a 32-pin QFN (5x5 mm) package. It is offered on tape and reel for high-volume SMT assembly. The part targets ultra-low-power embedded designs with Silicon Labs' proprietary energy-friendly peripherals, fast wake-up time, and deep-sleep current in the sub-microamp range. A microcontroller (MCU) is a single-chip computer containing a CPU core, volatile and non-volatile memory, and a rich set of on-chip peripherals such as timers, ADC, communication controllers, and GPIO. The Cortex-M0+ is the most energy-efficient ARM core from Arm Holdings, optimized for deterministic real-time response and minimal gate count. The Tiny Gecko 1 family further layers Silicon Labs' LESENSE, low-energy timer, and EMU (Energy Management Unit) features on top of the Cortex-M0+ to deliver energy-sensitive IoT endpoints that wake, sense, transmit, and return to deep sleep within milliseconds. Key features of this variant include 128 KB flash, 32 KB RAM, a 32-pin QFN package, supply voltage of 1.8 V to 3.8 V, and 24 digital I/O pins. The integrated DC-DC regulator and the broad peripheral mix (ADC, DAC, I2C, SPI, UART, USB, low-energy UART, and timers) make it well suited to battery-powered wireless sensor nodes, wearable health patches, and industrial HVAC controls. Technically, the part is built around a 32-bit ARM Cortex-M0+ core with hardware single-cycle multiplier, supported by a peripheral reflex system that lets DMA, GPIO, and timers collaborate without CPU intervention. The energy-friendly design includes five energy modes (EM0-EM4) with sub-microamp deep-sleep current, hardware crypto (AES-128/256), and a true random number generator (TRNG). Typical applications include IoT sensor endpoints, BLE-enabled beacons, wearable fitness bands, smart-home sensor hubs, industrial HVAC thermostats, battery-powered metering, and remote controls. The wide 1.8-3.8 V supply range simplifies single-cell Li-ion or 2x AA battery designs. When designing with this part, pay attention to the DC-DC inductor selection (the on-chip DC-DC needs an external 10 uH inductor) and the QSPI loading for any external flash expansion. The 32-pin QFN footprint is compact but leaves only 24 GPIO; engineers needing more I/O should step up to the QFP-64 or QFN-64 variants in the same family. This page synthesizes distributor pricing, drop-in alternatives within the same QFN-32 footprint, and practical low-energy design guidance not found in the manufacturer datasheet alone.

Permintaan RFG Kontak
EFM32TG11B520F128GQ64-B - 48MHz Cortex-M0+ 128KB MCU | Silicon Labs
EFM32TG11B520F128GQ64-B

EFM32TG11B520F128GQ64-B - 48MHz Cortex-M0+ 128KB MCU | Silicon Labs

The Silicon Labs EFM32TG11B520F128GQ64-B is an ARM Cortex-M0+ Tiny Gecko 1 microcontroller delivering 48 MHz of CPU performance with 128 KB of Flash and 32 KB of RAM in a 64-pin TQFP (10x10 mm) package, qualified for industrial temperature ranges. It is engineered for energy-sensitive connected applications that demand deterministic low-power operation and rich analog integration. What is an ARM Cortex-M0+ microcontroller? It is the most energy-efficient core in the ARM Cortex-M family, providing a 32-bit instruction set and Thumb-2 instruction subset while consuming only a few tens of microamps per MHz in active mode. The Cortex-M0+ core sits inside the EFM32 Tiny Gecko platform, which adds aggressive energy modes, peripheral reflex system, and a low-energy sensor interface (LESENSE) for autonomous sensor monitoring while the CPU sleeps. Key features include a hardware cryptographic engine supporting AES, ECC, SHA, and a True Random Number Generator (TRNG), 50 digital I/O pins with 5 V tolerance, a CAN 2.0 controller, robust capacitive sensing, and integrated 12-bit ADC and DAC peripherals. Active-mode current is rated at approximately 40 uA/MHz in Energy Mode 0 (EM0), with multiple low-energy sleep modes allowing deep sleep currents below 1 uA. Architecturally, the EFM32TG11B520F128GQ64-B uses a Cortex-M0+ core with a single-cycle multiplier and a Nested Vector Interrupt Controller (NVIC). Silicon Labs' proprietary Peripheral Reflex System (PRS) allows peripherals to communicate directly without CPU involvement, dramatically reducing wake-ups. The hardware crypto block offloads AES-128/256, SHA-1/2, ECC operations from the CPU for secure IoT. Typical applications include smart energy metering, IoT sensor nodes, secure connected wearables, capacitive-touch human-machine interfaces, industrial sensor hubs, and battery-powered home automation devices. The cryptographic engine and TRNG make it suitable for authenticated sensor endpoints requiring secure firmware update and tamper resistance. When designing with this MCU, allocate sufficient decoupling (one 100 nF X7R cap per VDD pin) and keep the analog reference traces short to preserve ADC linearity. Use Simplicity Studio with the GeckoPlatform_EFM32TG11B_DFP CMSIS pack for IDE configuration, and enable the JLC flash lock bits before deploying cryptographic keys to production silicon. This page synthesizes distributor pricing across DigiKey, Mouser, and LCSC, drop-in alternatives within the EFM32 Tiny Gecko family, and practical design notes not aggregated elsewhere, helping engineers compare options and source the part quickly.

Permintaan RFG Kontak
EFM32TG210F16-D-QFN32 - 32MHz Cortex-M3 MCU | Silicon Labs
EFM32TG210F16-D-QFN32

EFM32TG210F16-D-QFN32 - 32MHz Cortex-M3 MCU | Silicon Labs

The Silicon Labs EFM32TG210F16-D-QFN32 is a 32-bit ARM Cortex-M3 Tiny Gecko microcontroller operating at up to 32 MHz, with 16 KB of Flash memory, 4 KB of RAM, and a 32-QFN 6 x 6 mm package. It combines a 32-bit RISC core with autonomous peripherals and low-power operating modes for energy-sensitive embedded systems. A microcontroller is a complete programmable control device integrating a processor core, Flash program memory, RAM, clocking, interrupt control, and peripherals such as timers, communications interfaces, and analog blocks. Within the product hierarchy, the EFM32TG210 belongs to the Tiny Gecko family of 32-bit microcontrollers and uses the ARM Cortex-M3 processor architecture. Key specifications include a maximum clock frequency of 32 MHz, 16 KB of program Flash, 4 KB of SRAM, and 24 digital I/O pins. The processor can reach 1.25 Dhrystone MIPS per MHz, while an integrated Memory Protection Unit supports as many as eight memory segments. A Wake-up Interrupt Controller handles interrupts generated while the CPU is asleep. The EFM32TG210 combines relatively high processing performance with low-power behavior suitable for battery-operated equipment. Published power characteristics include consumption as low as 0.6 uA in Stop mode and approximately 150 uA/MHz in Run mode. Autonomous peripheral operation allows timers and other functions to continue handling defined events while the processor remains in a low-energy state, reducing the need for continuous software polling. Typical applications include connected sensor nodes, compact industrial controllers, battery-powered meters, low-power communications equipment, wearable accessories, and embedded subsystems that need a 32-bit core in a small surface-mount footprint. The 1.85 V to 3.8 V operating supply range also suits designs built around low-voltage 3 V power rails. When laying out the board, treat the exposed pad as a thermal and electrical connection point and follow the manufacturer land-pattern and thermal-via guidance. Confirm the device pin names against the manufacturer pinout table, and place the external decoupling capacitors close to their associated supply pins to limit impedance in fast-switching current paths. This page combines manufacturer-family specifications, same-footprint device comparisons, and practical implementation guidance to help engineers evaluate the EFM32TG210F16-D-QFN32 for compact, low-power embedded control designs.

Permintaan RFG Kontak
EFM32TG210F16-QFN32 - 32MHz Cortex-M3 16KB MCU | Silicon Labs
EFM32TG210F16-QFN32

EFM32TG210F16-QFN32 - 32MHz Cortex-M3 16KB MCU | Silicon Labs

The Silicon Labs EFM32TG210F16-QFN32 is a 32-bit ARM Cortex-M3 Tiny Gecko microcontroller with a 32 MHz maximum operating frequency, 16 KB of flash memory, and a 32-QFN 6 x 6 mm package. The device combines a low-power embedded architecture with integrated analog and digital peripherals, making it suitable for energy-sensitive embedded systems that require deterministic control and low standby consumption. A microcontroller is a programmable system-on-chip that integrates a processor core, memory, peripherals, and communication interfaces into one package. The EFM32TG series belongs to the MCU and embedded-processor hierarchy and combines ARM Cortex-M3 processing with energy-saving modes, autonomous peripheral operation, and fast wake-up behavior. These features distinguish it from conventional higher-power microcontroller platforms designed primarily for continuous operation. Verified distributor information identifies the EFM32TG210F16-QFN32 as an ARM Cortex-M3 Tiny Gecko MCU with 32-bit processing, 32 MHz operation, 16 KB flash organized as 16K x 8, and a 32-QFN 6 x 6 mm package. Silicon Labs materials also describe EFM32TG devices as low-power devices with energy-saving modes and autonomous peripherals. The available distributor listing indicates AES and operational-amplifier functionality, but exact peripheral counts and detailed electrical limits are not provided in the supplied data. The EFM32TG210F16-QFN32 is intended for applications where low power, compactness, and integrated control are more important than maximum flash capacity. Its 32 MHz Cortex-M3 core supports general embedded control, while the Tiny Gecko low-power platform supports battery-operated equipment. The 16 KB flash memory is modest compared with larger general-purpose MCUs, so firmware should be evaluated for image size and update requirements before design commitment. Typical uses include low-power sensor nodes, compact industrial controllers, battery-powered measurement equipment, consumer accessories, and embedded control modules. For designs requiring more program storage, the EFM32TG210F32-QFN32 family member provides 32 KB flash according to the manufacturer page and should be checked for footprint, memory, and peripheral compatibility. The device should also be reviewed against the application’s supply-voltage, temperature, and qualification requirements. Designers should place the decoupling network close to the device supply pins, keep analog and digital return-current paths controlled, and confirm the exposed-pad connection and thermal strategy against the package drawing. The QFN package is compact but not leaded, so assembly capability and soldering profile should be reviewed before production release. Use the manufacturer datasheet and reference design guidance for final pin, layout, and peripheral configuration decisions. This page combines verified manufacturer and distributor information, a transparent alternative comparison, and practical design guidance intended to help engineers evaluate fit, footprint, memory, low-power behavior, and sourcing constraints before selecting the EFM32TG210F16-QFN32.

Permintaan RFG Kontak
EFM32TG210F16-QFN32T - 32MHz Cortex-M3 16KB MCU | Silicon Labs
EFM32TG210F16-QFN32T

EFM32TG210F16-QFN32T - 32MHz Cortex-M3 16KB MCU | Silicon Labs

Silicon Labs EFM32TG210F16-QFN32T is a 32-bit ARM Cortex-M3 microcontroller with a 32 MHz clock, 16 KB of Flash memory, and a 32-pin QFN 6 x 6 mm package. It is designed for low-power embedded systems, combining a RISC processor, integrated analog and communication peripherals, and energy-saving sleep modes in one compact surface-mount device. An ultra-low-power microcontroller is a semiconductor designed to maintain useful processing performance while minimizing energy consumption during active and idle operation. The EFM32 Tiny Gecko family combines an ARM Cortex-M3 CPU with autonomous peripherals and dedicated low-power hardware. This allows a system to monitor or control external activity while the processor sleeps, reducing the time and energy required for wake-up and repeated polling. Key characteristics include a 32 MHz maximum operating frequency, 16 KB Flash, 4 KB RAM, AES hardware support, three operational amplifiers, and a 1.85 V to 3.8 V supply range. The MCU can reach as little as 0.6 µA in Stop mode and 150 µA/MHz in Run mode. Its Cortex-M3 implementation includes a Memory Protection Unit supporting up to eight memory segments and a Wake-up Interrupt Controller for events occurring while the CPU is asleep. The Cortex-M3 core is a 32-bit RISC processor capable of delivering as much as 1.25 Dhrystone MIPS/MHz. Integrated energy-management peripherals let the device retain peripheral operation in low-energy states, reducing software overhead for short wake-up cycles. The 32-pin QFN package also supports compact PCB layouts while providing the analog and mixed-signal resources expected from a Tiny Gecko-series embedded controller. Typical uses include battery-powered sensor nodes, compact industrial monitors, low-power IoT endpoints, energy-harvesting equipment, and portable measurement products. The 16 KB Flash capacity suits compact control firmware, while the integrated operational amplifiers and AES capability can simplify analog measurement and secure data handling without requiring separate components in every design. PCB design should preserve access to all 32 package pins and provide appropriate decoupling near the supply terminals. Confirm the exact pin assignments and exposed-pad requirements in the manufacturer datasheet before routing a new board. Software development should use the EFM32 device header, startup files, linker configuration, and programming tooling matching this specific MCU and Flash density. This product overview combines the core EFM32TG210 specifications, documented replacement status, package details, and engineering selection considerations. It also distinguishes direct same-package options from functionally similar devices that require firmware, memory, or peripheral validation before substitution.

Permintaan RFG Kontak
EFM32TG210F32-D-QFN32 - 32MHz Cortex-M3 MCU | Silicon Labs
EFM32TG210F32-D-QFN32

EFM32TG210F32-D-QFN32 - 32MHz Cortex-M3 MCU | Silicon Labs

The Silicon Labs EFM32TG210F32-D-QFN32 is a 32-bit ARM Cortex-M3 microcontroller operating up to 32 MHz, with 32 KB of Flash memory, 4 KB of RAM, and 24 digital I/O pins, housed in a 32-pin QFN package measuring 6 x 6 mm. Its combination of low-power operating modes, fast wake-up capability, and integrated peripherals suits energy-sensitive embedded systems. A microcontroller is a programmable semiconductor that integrates a processor core, memory, and peripherals such as timers, serial interfaces, analog functions, and GPIO on one device. The EFM32TG series belongs to the 32-bit MCU hierarchy and uses the ARM Cortex-M3 RISC architecture. This class of device provides greater processing capacity than an 8- or 16-bit MCU while supporting low-power operation for battery-operated equipment. The EFM32TG210F32-D-QFN32 includes 32 KB of Flash for firmware and 4 KB of SRAM for working data. Its CPU operates at up to 32 MHz, and the device provides two 16-bit timers and 24 digital I/O pins. The Tiny Gecko platform also features autonomous peripheral operation, allowing timer and communication activities to continue with limited processor intervention. Run-mode consumption is specified at 150 microamperes per megahertz, while Stop mode can reach 0.6 microamperes. The ARM Cortex-M3 core uses a 32-bit RISC instruction set and can achieve as much as 1.25 Dhrystone MIPS per megahertz. A memory protection unit supports as many as eight memory segments, and the Wake-up Interrupt Controller handles events that occur while the processor is asleep. These features allow responsive interrupt-driven designs without keeping the CPU continuously active. Typical applications include wearable sensors, compact industrial nodes, battery-powered remote controls, connected IoT equipment, and portable measurement instruments. The 32 MHz processing rate is suitable for protocol handling, state-machine control, data acquisition, and low-to-moderate-bandwidth communications. The 24 GPIO pins also permit direct connection of switches, indicators, sensors, and actuators. PCB design should preserve the exposed-pad thermal and electrical requirements of the QFN package. Place decoupling capacitors close to the power pins, connect the exposed pad to the appropriate ground plane, and follow the manufacturer pin description table when assigning tracks. Confirm the selected package dimensions and exposed-pad treatment against the manufacturer datasheet before fabrication. This product page combines the manufacturer specifications, package information, application guidance, and practical design considerations in one engineering reference. It also distinguishes pin-compatible family alternatives while identifying where package, memory, or peripheral differences require design review.

Permintaan RFG Kontak
EFM32TG210F32-QFN32 - 32MHz ARM Cortex-M3 MCU | Silicon Labs
EFM32TG210F32-QFN32

EFM32TG210F32-QFN32 - 32MHz ARM Cortex-M3 MCU | Silicon Labs

The Silicon Labs EFM32TG210F32-QFN32 is an ARM Cortex-M3 microcontroller with a maximum clock speed of 32 MHz, 32 kB of Flash memory, 4 kB of RAM, and a 32-QFN 6 x 6 mm package. The device provides 24 digital I/O pins and is designed for energy-sensitive embedded systems requiring compact size, low-power operation, and fast wake-up performance. An ARM Cortex-M3 microcontroller is a 32-bit reduced-instruction-compute embedded processor. Microcontrollers combine a processor core, Flash program memory, RAM, clocks, communications peripherals, timers, analog interfaces, and general-purpose I/O in one integrated circuit. The EFM32 Tiny Gecko family extends this MCU hierarchy with low-energy operating techniques designed for battery-operated and intermittently powered equipment. Key features include an ARM Cortex-M3 core operating up to 32 MHz, 32 kB Flash, 4 kB RAM, 24 digital I/O pins, and two 16-bit timers. The low-power platform includes energy-saving modes and fast wake-up behavior. Its 32-QFN package occupies only 6 x 6 mm, making it suitable for space-constrained control and sensing products. The EFM32TG210F32-QFN32 integrates an ARM Cortex-M3 processor with a precision internal voltage regulator, oscillators, timers, GPIO, serial interfaces, and low-power control logic. According to the manufacturer documentation, the Cortex-M3 architecture includes a 32-bit RISC processor, a Memory Protection Unit supporting as many as eight memory segments, and a Wake-up Interrupt Controller for events occurring while the processor sleeps. Typical uses include battery-powered sensor nodes, compact industrial controls, energy-harvesting equipment, portable instruments, and connected accessories. The combination of 32-bit processing, 4 kB RAM, and 24 digital I/O pins supports control logic, communication protocols, and multiple peripheral functions without requiring a separate processor. Board design should preserve the exact package footprint, power-decoupling structure, exposed-pad connection, and programming interface specified by the manufacturer. Confirm pin multiplexing, peripheral availability, and low-power mode requirements in the EFM32TG210 datasheet and the EFM32 Cortex-M3 Reference Manual before finalizing the PCB and firmware. This page consolidates the core device specifications, application guidance, verified source links, and same-family drop-in alternatives. It also identifies where package, pin, pricing, and lifecycle details must be confirmed directly with Silicon Labs before production release.

Permintaan RFG Kontak
EFM32TG210F8-D-QFN32 - 32MHz ARM Cortex-M3 MCU | Silicon Labs
EFM32TG210F8-D-QFN32

EFM32TG210F8-D-QFN32 - 32MHz ARM Cortex-M3 MCU | Silicon Labs

The Silicon Labs EFM32TG210F8-D-QFN32 is a 32-bit ARM Cortex-M3 microcontroller with a 32 MHz maximum clock, 8 kB of Flash memory, 2 kB of RAM, and 24 digital I/O pins in a 32-pin QFN package with an exposed pad. It combines a compact memory footprint with energy-saving modes and fast wake-up behavior for embedded systems that prioritize low power. An EFM32 microcontroller is an embedded processor platform that integrates a CPU, memory, analog and digital peripherals, interrupt control, and energy-management functions into one device. The EFM32TG210 belongs to the Tiny Gecko family, where the ARM Cortex-M3 processor operates within a system designed for both performance-sensitive control and low-current standby operation. This hierarchy places the device among 32-bit microcontrollers, embedded processors, and general-purpose semiconductor components. The Tiny Gecko architecture operates at up to 32 MHz and includes two 16-bit timers, digital I/O, AES hardware support, and an operational amplifier according to the product listing. Energy-sensitive operation is supported by consumption as low as 0.6 µA in Stop mode and approximately 150 µA/MHz in Run mode. These characteristics make the controller useful in battery-operated products where duty-cycled sensing and measurement must coexist with responsive control firmware. The EFM32TG210F8-D-QFN32 uses 8 kB Flash for program storage and 2 kB RAM for working data. Its integrated analog features can reduce the need for external signal-conditioning components in compact sensor nodes, while the 24 digital I/O pins support switches, indicators, communications, and external control signals. The exposed-pad QFN construction also provides a thermal path through PCB copper, making package layout an important part of reliable operation. Typical uses include connected sensor nodes, compact industrial monitors, wearable accessories, low-power measurement instruments, and consumer products that wake briefly to acquire or transmit data. In these systems, the MCU acts as the central controller: it samples inputs, executes embedded algorithms, manages timers, controls peripherals, and returns to a low-energy state whenever the measurement cycle is complete. Designers should follow the manufacturer pin-description table when assigning every QFN signal and must preserve the exposed-pad connection to the appropriate PCB plane. Place decoupling capacitors close to the supply pins, confirm oscillator and reset requirements in the device datasheet, and calculate the duty-cycle-dependent average current before selecting the power source. This page combines the core device specifications, engineering comparisons, application guidance, and practical design notes needed to evaluate the EFM32TG210F8-D-QFN32.

Permintaan RFG Kontak
EFM32TG210F8-D-QFN32R - 32MHz ARM Cortex-M3 MCU | Silicon Labs (Tape & Reel)
EFM32TG210F8-D-QFN32R

EFM32TG210F8-D-QFN32R - 32MHz ARM Cortex-M3 MCU | Silicon Labs (Tape & Reel)

The Silicon Labs EFM32TG210F8-D-QFN32R is a 32-bit ARM Cortex-M3 microcontroller with a 32 MHz maximum clock, 8 kB of Flash memory, 2 kB of RAM, and 24 digital I/O pins in a 32-pin QFN package with an exposed pad. It combines a compact memory footprint with energy-saving modes and fast wake-up behavior for embedded systems that prioritize low power. An EFM32 microcontroller is an embedded processor platform that integrates a CPU, memory, analog and digital peripherals, interrupt control, and energy-management functions into one device. The EFM32TG210 belongs to the Tiny Gecko family, where the ARM Cortex-M3 processor operates within a system designed for both performance-sensitive control and low-current standby operation. This hierarchy places the device among 32-bit microcontrollers, embedded processors, and general-purpose semiconductor components. The Tiny Gecko architecture operates at up to 32 MHz and includes two 16-bit timers, digital I/O, AES hardware support, and an operational amplifier according to the product listing. Energy-sensitive operation is supported by consumption as low as 0.6 µA in Stop mode and approximately 150 µA/MHz in Run mode. These characteristics make the controller useful in battery-operated products where duty-cycled sensing and measurement must coexist with responsive control firmware. The EFM32TG210F8-D-QFN32R uses 8 kB Flash for program storage and 2 kB RAM for working data. Its integrated analog features can reduce the need for external signal-conditioning components in compact sensor nodes, while the 24 digital I/O pins support switches, indicators, communications, and external control signals. The exposed-pad QFN construction also provides a thermal path through PCB copper, making package layout an important part of reliable operation. Typical uses include connected sensor nodes, compact industrial monitors, wearable accessories, low-power measurement instruments, and consumer products that wake briefly to acquire or transmit data. In these systems, the MCU acts as the central controller: it samples inputs, executes embedded algorithms, manages timers, controls peripherals, and returns to a low-energy state whenever the measurement cycle is complete. Designers should follow the manufacturer pin-description table when assigning every QFN signal and must preserve the exposed-pad connection to the appropriate PCB plane. Place decoupling capacitors close to the supply pins, confirm oscillator and reset requirements in the device datasheet, and calculate the duty-cycle-dependent average current before selecting the power source. This page combines the core device specifications, engineering comparisons, application guidance, and practical design notes needed to evaluate the EFM32TG210F8-D-QFN32R.

Permintaan RFG Kontak
EFM32TG210F8-QFN32 - 32MHz Cortex-M3 MCU | Silicon Labs
EFM32TG210F8-QFN32

EFM32TG210F8-QFN32 - 32MHz Cortex-M3 MCU | Silicon Labs

The Silicon Labs EFM32TG210F8-QFN32 is an ARM Cortex-M3 microcontroller operating up to 32 MHz, with 8 kB Flash, 2 kB RAM, 24 digital I/O pins, and two 16-bit timers in a 32-QFN package. Its supply range is 1.85 V to 3.8 V. Designed around the Tiny Gecko low-power platform, the device targets energy-sensitive embedded products that need responsive control, compact size, and low-power operation. A microcontroller is a programmable system-on-chip that integrates a processor core, memory, digital interfaces, timers, and supporting peripherals on one semiconductor device. The EFM32TG210F8-QFN32 uses the ARM Cortex-M3 architecture, placing it within the 32-bit embedded MCU -> microcontroller -> semiconductor hierarchy. Its combination of 32 MHz processing and 8 kB Flash makes it appropriate for compact control tasks rather than resource-heavy edge-computing workloads. Key features include a 32 MHz ARM Cortex-M3 core, 8 kB Flash memory, 2 kB RAM, 24 digital I/O pins, and two 16-bit timers. The official product description also identifies low-energy techniques, fast wake-up behavior, and energy-saving modes. These characteristics suit systems that spend substantial time between active operations while retaining deterministic access to embedded peripherals. The device belongs to Silicon Labs' Tiny Gecko family and provides an integrated AES and operational-amplifier feature set according to distributor product data. Its 1.85 V to 3.8 V operating range allows use in low-voltage embedded designs, while the 32-QFN 6x6 mm package supports compact PCB layouts. Exact peripheral availability, electrical limits, pin functions, and tool-support details should be confirmed against the manufacturer documentation before production design release. Typical applications include battery-powered sensing, compact industrial controllers, wearable or accessory electronics, low-power embedded nodes, and portable instruments. In these systems, the MCU can execute firmware, operate timers, read inputs, and control outputs while using its low-power platform to reduce activity outside the required measurement or control intervals. Designers should verify the QFN land pattern, exposed-pad connection, pin multiplexing, decoupling requirements, and supported voltage range in the manufacturer documentation. The 6x6 mm QFN package also requires careful PCB layout and assembly process control to achieve reliable thermal and electrical performance.

Permintaan RFG Kontak
EFM32TG210F8-QFN32T - 32MHz Cortex-M3 MCU | Silicon Labs
EFM32TG210F8-QFN32T

EFM32TG210F8-QFN32T - 32MHz Cortex-M3 MCU | Silicon Labs

The Silicon Labs EFM32TG210F8-QFN32T is a 32-bit ARM Cortex-M3 microcontroller operating up to 32 MHz, with 8 kB of Flash memory, 2 kB of RAM, 24 digital I/O pins, and AES hardware encryption in a 32-QFN 6 x 6 mm package. Its 1.85 V to 3.8 V operating range supports energy-efficient embedded designs. The device also provides three operational amplifiers and two 16-bit timers, making it suitable for compact sensing, control, and connected products. A microcontroller is a programmable semiconductor that integrates a processor core, memory, and peripherals on one device. Within the hierarchy of embedded semiconductors, the EFM32TG210F8-QFN32T is an ARM Cortex-M3 MCU, an energy-focused 32-bit embedded controller used for battery-operated equipment, industrial controls, consumer accessories, and connected sensors. Its low-energy operating techniques and short wake-up behavior are particularly relevant when the product spends substantial time in sleep or deep-sleep modes. Key features include an ARM Cortex-M3 processor core with a maximum clock frequency of 32 MHz, 8 kB Flash for firmware storage, 2 kB SRAM for working memory, and AES encryption support. The integrated peripheral set includes 24 digital I/O pins, two 16-bit timers, and three operational amplifiers. These resources allow a design to combine control logic, signal conditioning, and communications functions without relying on several separate discrete components. The Tiny Gecko architecture integrates processing, low-power management, and energy-sensitive peripherals in one system-on-chip design. Its 1.85 V to 3.8 V supply range permits operation across low-voltage embedded systems, while the 32 MHz Cortex-M3 core provides substantially more processing capability than an 8-bit controller. The three integrated op-amps can reduce the component count in sensor, measurement, and analog-interface designs when their input, output, and stability requirements match the device specifications. Typical applications include battery-powered sensor nodes, industrial monitoring modules, compact access-control products, wearable accessories, and energy-conscious embedded controls. The microcontroller can execute protocol and control firmware in Flash, retain transient data in its 2 kB SRAM, and use its timers and op-amps to support periodic measurements or analog signal conditioning. The manufacturer product page identifies the EFM32TG210F8-QFN32 family as being optimized for energy-sensitive applications. Designers should verify the exact QFN pin assignment, exposed-pad requirements, decoupling, and operating limits against the manufacturer datasheet before layout. Firmware must also account for the limited 8 kB Flash and 2 kB RAM budgets. Confirming the complete pinout, peripheral multiplexing, and PCB land pattern is essential because this page only uses values explicitly present in the supplied verified sources. This page consolidates verified manufacturer and distributor information, distinguishes electrically compatible family alternatives, and adds practical selection guidance for engineers evaluating the EFM32TG210F8-QFN32T. It also highlights where additional datasheet data is required rather than substituting unverified electrical, package, pricing, or lifecycle assumptions.

Permintaan RFG Kontak
EFM32TG222F16-D-QFP48 - 32MHz Low-Power MCU | Silicon Labs
EFM32TG222F16-D-QFP48

EFM32TG222F16-D-QFP48 - 32MHz Low-Power MCU | Silicon Labs

The Silicon Labs EFM32TG222F16-D-QFP48 is a 32 MHz ARM Cortex-M3 microcontroller with 16 kB Flash, 4 kB RAM, 37 digital I/O pins, and a 48-pin TQFP package. Its operating supply range is 1.98 V to 3.8 V. The device is designed around the Tiny Gecko low-power architecture, combining fast wake-up behavior, energy-saving modes, and autonomous peripheral operation for energy-sensitive embedded systems. A microcontroller is a programmable semiconductor that integrates a processor core, memory, peripherals, and interface logic into one compact device. The EFM32TG222F16-D-QFP48 belongs to the ARM Cortex-M3 microcontroller hierarchy and uses the Cortex-M3 as its 32-bit instruction-set architecture. Its low-power platform is intended to extend operating time in battery-powered sensors, portable instruments, industrial monitors, and connected embedded products that spend substantial time in low-power states. The principal features include a maximum 32 MHz processor speed, 16 kB of Flash program memory, 4 kB of SRAM, 37 digital I/O pins, and two 16-bit timers. The architecture also provides integrated analog and communication resources to reduce the number of external components required. Silicon Labs identifies the device as suitable for energy-sensitive applications by combining low active consumption with sleep-mode operation and rapid wake-up capability. The Tiny Gecko platform uses energy-management techniques to manage switching between active and low-energy states. Published family information identifies consumption as low as 0.6 µA in Stop mode and approximately 150 µA/MHz in Run mode. These characteristics make it possible to balance processing throughput against duty-cycled energy use, particularly in systems that wake periodically to acquire data and then return to sleep. Typical uses include battery-powered environmental sensors, industrial condition-monitoring nodes, compact health and wellness devices, portable measurement equipment, and low-power IoT endpoints. In these systems, the microcontroller can collect measurements through its integrated peripherals, process them locally, and enter a low-power state between events. Its 37 digital I/O pins also provide flexibility for sensors, indicators, switches, and peripheral control signals. A critical design consideration is supply-voltage and decoupling layout. Keep the 3.3 V power rail within the specified 1.98 V to 3.8 V range, place the required bypass capacitor close to the supply pins, and route return currents efficiently. PCB exposure and pad geometry should also be checked against the manufacturer’s 48-pin TQFP footprint and land pattern before release. This page combines the manufacturer specifications with practical application guidance, package details, sourcing information, and a structured comparison of same-family drop-in candidates. It is intended to help engineers assess memory, package, peripheral compatibility, and low-power behavior before committing the EFM32TG222F16-D-QFP48 to a PCB design.

Permintaan RFG Kontak
EFM32TG222F16-QFP48 - 32MHz ARM Cortex-M3 MCU | Silicon Labs
EFM32TG222F16-QFP48

EFM32TG222F16-QFP48 - 32MHz ARM Cortex-M3 MCU | Silicon Labs

Silicon Labs EFM32TG222F16-QFP48 is a 32-bit ARM Cortex-M3 microcontroller rated up to 32 MHz, with 16 kB of Flash memory, 4 kB of RAM, and 37 digital I/O pins, all housed in a 48-pin TQFP package measuring 7 x 7 mm. A microcontroller is a programmable semiconductor that integrates a processor core, memory, and peripherals on one chip. The EFM32 belongs to the Tiny Gecko family, a branch of Silicon Labs' energy-conscious 32-bit MCU portfolio. Its architecture supports low-energy operation, fast wake-up behavior, and energy-saving modes, making it suitable for embedded systems that must balance responsive control with restricted power budgets. The most prominent device parameters are its 32 MHz Cortex-M3 operating speed, 16 kB Flash configuration, and 4 kB RAM. The device also provides 37 digital I/O pins and two 16-bit timers. These resources support event-driven sensing, local control, communication, and compact user interfaces without requiring a separate processor. The listed AES and operational-amplifier features extend the device beyond basic general-purpose I/O. Technical performance comes from the ARM Cortex-M3 processor and Silicon Labs' low-power Tiny Gecko platform. The processor provides 32-bit instruction handling, while the peripheral system includes configurable I/O locations and two dedicated 16-bit timers. Operating voltage is specified from 1.85 V to 3.8 V, allowing the MCU to operate across common low-voltage supply ranges while supporting both 2.5 V and 3.3 V system architectures. Typical uses include connected sensor nodes, compact industrial controls, energy-monitoring instruments, low-power actuator controllers, and embedded consumer devices. In these systems, the MCU can acquire sensor data, execute control logic, manage a serial communication link, and enter a low-energy state when extended activity is unnecessary. Its 37 available I/O pins are particularly useful when the design must support multiple discrete inputs, indicators, or external control signals. Designers should preserve adequate routing flexibility around the 48-pin TQFP footprint and confirm the exact peripheral assignments for the selected board configuration. Power-supply decoupling, grounding, and signal-integrity layout remain essential even in a low-power design. Firmware should use the low-energy modes only after validating wake-up behavior and required peripheral states. This product page combines the manufacturer specifications with a practical comparison against related EFM32 devices, application guidance, and design considerations. It is intended to help engineers assess memory capacity, package reuse, power behavior, and migration options before committing a PCB layout to production.

Permintaan RFG Kontak
EFM32TG222F16-QFP48T - 32MHz Cortex-M3 MCU | Silicon Labs
EFM32TG222F16-QFP48T

EFM32TG222F16-QFP48T - 32MHz Cortex-M3 MCU | Silicon Labs

Silicon Labs EFM32TG222F16-QFP48T is a 32-bit ARM Cortex-M3 microcontroller rated up to 32 MHz, with 16 KB of Flash memory, 4 KB of RAM, and 37 digital I/O pins in a 48-pin TQFP package measuring 7 x 7 mm. The device combines a low-power embedded platform, fast wake-up behavior, energy-saving modes, AES hardware, and three operational amplifiers in one compact package. A microcontroller is an integrated circuit containing a processor core, program memory, data memory, and peripherals such as timers, analog interfaces, communications blocks, and GPIO. The EFM32 family belongs to the ARM Cortex-M3 microcontroller category and emphasizes energy-efficient embedded control. Its architecture suits systems that alternate between periods of active processing and long periods of reduced-power operation. Core features include a 32 MHz ARM Cortex-M3 processor, 16 KB of Flash, 4 KB of RAM, 37 digital I/O pins, and two 16-bit timers. Silicon Labs also identifies three operational amplifiers and AES support in the device listing. These resources allow a compact design to combine control logic, signal conditioning, and secure communication without requiring several separate analog or security ICs. The EFM32 low-power platform provides an operating mode consuming 150 uA/MHz and a Stop mode reaching 0.6 uA, according to the manufacturer EFM32TG datasheet. These figures make duty-cycled operation practical for devices that spend most of their time asleep but must respond quickly when a sensor, user interface, or communications event occurs. Typical applications include low-power sensor nodes, battery-operated industrial monitors, connected measurement equipment, compact security controllers, analog-sensing products, and energy-conscious IoT devices. The 48-pin TQFP package also exposes more I/O than smaller QFN options while remaining suitable for automated PCB assembly. Designers should confirm the complete pin-assignment table, decoupling requirements, clock options, and analog operating limits in the manufacturer datasheet. Firmware and peripheral-equivalence checks are essential when the MCU is used as a replacement in an existing PCB, even when the package dimensions match. This page combines the EFM32TG222F16-QFP48T specifications, package information, power characteristics, application guidance, and an engineering comparison with identified same-package alternatives. It also highlights the practical checks needed for PCB reuse, firmware migration, and low-power system design.

Permintaan RFG Kontak
EFM32TG222F32-D-QFP48 - 32MHz Cortex-M3 MCU | Silicon Labs
EFM32TG222F32-D-QFP48

EFM32TG222F32-D-QFP48 - 32MHz Cortex-M3 MCU | Silicon Labs

The Silicon Labs EFM32TG222F32-D-QFP48 is an ARM Cortex-M3 microcontroller rated up to 32 MHz, with 32 kB of Flash memory, 4 kB of RAM, and 37 digital I/O pins in a 48-pin TQFP package. It operates from 1.98 V to 3.8 V and combines a 32-bit RISC core with energy-saving modes and fast wake-up behavior for compact, low-power embedded systems. A microcontroller is a programmable semiconductor that integrates a CPU core, memory, and peripherals into one device. The EFM32TG222 belongs to the Tiny Gecko family within the EFM32 product portfolio. Its combination of 32 MHz processing performance, 4 kB SRAM, and extensive configurable peripherals makes it suitable for applications that need responsive control, efficient serial communication, and compact implementation in a 7 mm × 7 mm surface-mount package. Key features include 32 kB Flash, 4 kB RAM, 37 digital I/O pins, two 16-bit timers, AES hardware, and three operational amplifiers. The supply-voltage range of 1.98 V to 3.8 V supports common low-voltage system rails. Fast wake-up and energy-saving modes are important for devices that spend substantial time asleep and need short active intervals for sensor acquisition, control updates, or communications. The ARM Cortex-M3 architecture provides a 32-bit processing environment while retaining a straightforward embedded instruction set. Two 16-bit timers support periodic timing, pulse measurement, and motor or general-purpose control tasks. Configurable I/O allows pins to be assigned according to board-level routing, while the operational amplifiers can reduce external analog component count in suitable low-level signal-conditioning designs. Typical uses include industrial sensor nodes, compact energy meters, building controls, portable accessories, battery-powered instrumentation, and connected IoT equipment. In these systems, the microcontroller can acquire sensor data, execute control logic, drive indicators, and communicate through configured serial peripherals. Its 48-pin TQFP footprint also provides more I/O than smaller QFN packages commonly used for cost-constrained designs. Designers should preserve the manufacturer-recommended decoupling and programming interfaces, and they should review the complete pin-description table before assigning signals. The exposed 1.98 V to 3.8 V operating range requires compatible power regulation, while careful clock and sleep-mode planning is essential for achieving low average energy consumption in battery-operated products.

Permintaan RFG Kontak
EFM32TG222F32-QFP48 - 32MHz ARM Cortex-M3 MCU | Silicon Labs
EFM32TG222F32-QFP48

EFM32TG222F32-QFP48 - 32MHz ARM Cortex-M3 MCU | Silicon Labs

The Silicon Labs EFM32TG222F32-QFP48 is a 32-bit ARM Cortex-M3 microcontroller operating up to 32 MHz, with 32 kB of Flash memory, 4 kB of RAM, 37 digital I/O pins, and two 16-bit timers in a 48-pin TQFP package. It combines a low-power embedded platform with energy-saving modes and fast wake-up behavior for compact, battery-powered control systems. An MCU is a programmable semiconductor that integrates a processor core, memory, peripherals, and I/O into one device. The EFM32TG222F32-QFP48 belongs to the Tiny Gecko product family, which combines the 32-bit ARM Cortex-M3 processor with low-power operation and autonomous peripheral functions. This hierarchy places it within embedded processors, microcontrollers, and energy-sensitive control ICs used to supervise sensors, communications, and actuators. The device's primary characteristics include its 32 MHz Cortex-M3 core, 32 kB Flash program memory, and 4 kB SRAM. Its 37 digital I/O pins provide substantial board-level connectivity in a 7 x 7 mm, 48-pin TQFP package. Two dedicated 16-bit timers support periodic timing, pulse measurement, and motor or signal-control functions. The integrated analog and communications capabilities make the MCU suitable for connected industrial, medical, and instrumentation products. The Tiny Gecko architecture emphasizes energy efficiency while retaining 32-bit processing performance. Low-energy operating modes are useful in systems that spend most of their time waiting for an external event, while fast wake-up behavior reduces the delay before processing resumes. Autonomous peripherals can perform selected timing, sensing, or communication tasks with reduced processor involvement, helping contain overall system energy use. Typical uses include industrial sensor nodes, compact data loggers, building-control endpoints, medical monitoring equipment, battery-powered accessories, and low-power communications modules. The 37 GPIO count can support digital interfaces and discrete controls, while the two 16-bit timers are valuable for precise periodic operations. Designers should also account for the limited 4 kB SRAM when sizing buffers or organizing the firmware. A key hardware consideration is that the controller's low-power benefit must be balanced against 48-pin routing density in a 7 x 7 mm package. PCB designers should preserve short decoupling paths between each supply pin and its capacitor, provide clean grounding for analog functions, and route high-speed or sensitive signals away from switching nodes. The pin-description and recommended-land-pattern tables in the manufacturer datasheet should be used for final footprint and signal assignment. This product page combines manufacturer specifications, package and memory details, functional alternatives, application guidance, and practical design considerations to support faster component selection and board planning.

Permintaan RFG Kontak
EFM32TG222F8-D-QFP48 - 32MHz ARM MCU | Silicon Labs
EFM32TG222F8-D-QFP48

EFM32TG222F8-D-QFP48 - 32MHz ARM MCU | Silicon Labs

Silicon Labs EFM32TG222F8-D-QFP48 is an ARM Cortex-M3 32-bit microcontroller operating up to 32 MHz, with 8 KB of Flash, 2 KB of RAM, and 37 digital I/O pins in a 48-pin TQFP package measuring 7 x 7 mm. Its operating supply range is 1.98 V to 3.8 V. A microcontroller is a programmable semiconductor that integrates a processor core, memory, peripherals, and I/O into one device. The ARM Cortex-M3 belongs to the MCU hierarchy: microcontroller -> embedded processor -> programmable semiconductor. Tiny Gecko MCUs combine conventional processing performance with low-power operating techniques, energy-saving modes, and fast wake-up behavior for battery-powered and energy-conscious products. The EFM32TG222F8-D-QFP48 provides 8 KB of Flash for firmware, 2 KB of RAM for working data, and two 16-bit timers alongside 37 digital I/O pins. These resources suit compact control products that require mixed signal acquisition, timing, serial communication, and general-purpose digital control without using a larger microcontroller package. Its architecture is based on a 32-bit ARM Cortex-M3 core capable of running at up to 32 MHz. The low-power platform supports energy-sensitive designs by combining sleep-oriented operating modes with fast wake-up capability. Exact current consumption, wake-up timing, and peripheral performance values should be selected from the device datasheet for the specific operating mode and clock configuration. Typical uses include compact industrial sensors, low-power wireless end nodes, building-control modules, battery-operated instruments, and connected accessories. The 48-pin TQFP provides enough I/O for external sensing interfaces, indicator control, communications, programming, and supporting power circuitry while remaining suitable for conventional PCB assembly. When planning the PCB, reserve the pins for power, ground, programming, reset, and decoupling according to the manufacturer pin-description table. Use short return paths and place the required input and bypass capacitors close to their associated supply pins. Firmware memory is limited, so partition the 8 KB Flash for boot code, application code, and configuration data with margin for future updates. This product page combines the manufacturer specifications, package details, verified sourcing information, drop-in candidate analysis, application guidance, and practical design notes into a focused engineering reference for evaluating the EFM32TG222F8-D-QFP48 in low-power embedded systems.

Permintaan RFG Kontak
EFM32TG222F8-D-QFP48R - 32MHz ARM MCU | Silicon Labs (Tape & Reel)
EFM32TG222F8-D-QFP48R

EFM32TG222F8-D-QFP48R - 32MHz ARM MCU | Silicon Labs (Tape & Reel)

Silicon Labs EFM32TG222F8-D-QFP48R is an ARM Cortex-M3 32-bit microcontroller operating up to 32 MHz, with 8 KB of Flash, 2 KB of RAM, and 37 digital I/O pins in a 48-pin TQFP package measuring 7 x 7 mm. Its operating supply range is 1.98 V to 3.8 V. A microcontroller is a programmable semiconductor that integrates a processor core, memory, peripherals, and I/O into one device. The ARM Cortex-M3 belongs to the MCU hierarchy: microcontroller -> embedded processor -> programmable semiconductor. Tiny Gecko MCUs combine conventional processing performance with low-power operating techniques, energy-saving modes, and fast wake-up behavior for battery-powered and energy-conscious products. The EFM32TG222F8-D-QFP48R provides 8 KB of Flash for firmware, 2 KB of RAM for working data, and two 16-bit timers alongside 37 digital I/O pins. These resources suit compact control products that require mixed signal acquisition, timing, serial communication, and general-purpose digital control without using a larger microcontroller package. Its architecture is based on a 32-bit ARM Cortex-M3 core capable of running at up to 32 MHz. The low-power platform supports energy-sensitive designs by combining sleep-oriented operating modes with fast wake-up capability. Exact current consumption, wake-up timing, and peripheral performance values should be selected from the device datasheet for the specific operating mode and clock configuration. Typical uses include compact industrial sensors, low-power wireless end nodes, building-control modules, battery-operated instruments, and connected accessories. The 48-pin TQFP provides enough I/O for external sensing interfaces, indicator control, communications, programming, and supporting power circuitry while remaining suitable for conventional PCB assembly. When planning the PCB, reserve the pins for power, ground, programming, reset, and decoupling according to the manufacturer pin-description table. Use short return paths and place the required input and bypass capacitors close to their associated supply pins. Firmware memory is limited, so partition the 8 KB Flash for boot code, application code, and configuration data with margin for future updates. This product page combines the manufacturer specifications, package details, verified sourcing information, drop-in candidate analysis, application guidance, and practical design notes into a focused engineering reference for evaluating the EFM32TG222F8-D-QFP48R in low-power embedded systems.

Permintaan RFG Kontak
EFM32TG222F8-QFP48 - 32MHz Cortex-M3 MCU | Silicon Labs
EFM32TG222F8-QFP48

EFM32TG222F8-QFP48 - 32MHz Cortex-M3 MCU | Silicon Labs

The Silicon Labs EFM32TG222F8-QFP48 is an ARM Cortex-M3 32-bit microcontroller operating up to 32 MHz, with 8 kB of Flash, 2 kB of RAM, and 37 digital I/O pins, housed in a 48-TQFP 7 x 7 mm package. A microcontroller is a programmable system-on-chip that integrates a CPU core, memory, and peripherals into one semiconductor package. The EFM32TG222F8-QFP48 belongs to the Tiny Gecko family and combines general-purpose embedded processing with energy-saving modes and fast wake-up behavior. Its position in the hierarchy is MCU -> embedded microcontroller -> ARM Cortex-M3 processor -> Silicon Labs Tiny Gecko platform. The device provides 8 kB Flash organized as 8K x 8 and 2 kB RAM. Its listed peripheral resources include 37 digital I/O pins and two 16-bit timers. These features suit compact embedded products that need deterministic control, low-power operation, and a compact 48-TQFP footprint rather than a large high-pin-count MCU package. The ARM Cortex-M3 core provides a 32-bit processing architecture at speeds up to 32 MHz. The manufacturer describes the EFM32TG222F8-QFP48 as energy-sensitive and highlights its low-power platform, innovative low-energy techniques, fast wake-up times, and energy-saving modes. The 48-TQFP package measures 7 x 7 mm and is intended for surface-mount PCB assembly. Typical applications include low-power sensor nodes, compact industrial controllers, battery-operated instruments, wearable accessories, and embedded control modules. The 37 digital I/O pins provide interfaces for sensors, indicators, actuators, and communication peripherals, while the two 16-bit timers support timing, pulse measurement, and periodic control tasks. Designers should verify the complete pin multiplexing, peripheral availability, operating voltage, and timing limits against the manufacturer datasheet before finalizing a PCB. In particular, do not infer analog, communication, or debug capabilities from the digital-I/O count alone; each function must be assigned to a valid pin in the device pin configuration. This page consolidates verified manufacturer and distributor information, distinguishes unavailable technical fields, and avoids presenting unverified substitutes as drop-in replacements. For an energy-sensitive 32 MHz Cortex-M3 design, the EFM32TG222F8-QFP48 provides a defined 8 kB Flash, 2 kB RAM, and 48-TQFP integration baseline.

Permintaan RFG Kontak
EFM32TG222F8-QFP48T - 32MHz Cortex-M3 MCU | Silicon Labs
EFM32TG222F8-QFP48T

EFM32TG222F8-QFP48T - 32MHz Cortex-M3 MCU | Silicon Labs

The Silicon Labs EFM32TG222F8-QFP48T is a 32-bit ARM Cortex-M3 microcontroller operating up to 32 MHz, with 8 KB of Flash memory, 2 KB of RAM, and 37 digital I/O pins in a 48-pin TQFP package. It also includes three operational amplifiers and AES capability, combining general-purpose embedded control with energy-conscious peripheral integration. A microcontroller is a semiconductor device that integrates a processor core, memory, I/O, timers, and communication peripherals into one component. The EFM32TG222F8-QFP48T belongs to the Tiny Gecko family, where the ARM Cortex-M3 core provides a compact instruction set for embedded control. Within the device hierarchy, it is a 32-bit MCU, an embedded processor, and a power-sensitive mixed-signal control platform. Three principal characteristics define this configuration: a maximum CPU speed of 32 MHz, 8 KB of Flash for firmware, and 2 KB of SRAM for working data. The 37 digital I/O pins provide interface capacity for sensors, actuators, human-interface devices, and external control signals. Two 16-bit timers support periodic timing, pulse measurement, and basic motor or signal-generation tasks. The integrated operational amplifiers are useful when a board must amplify weak analog signals without adding separate amplifier packages. AES support is valuable for products that need hardware-assisted encryption and decryption. The low-energy platform, fast wake-up behavior, and energy-saving modes are intended to reduce active and idle consumption in compact embedded systems. Typical uses include battery-powered sensor nodes, industrial condition-monitoring terminals, compact instrumentation, building-control endpoints, and low-power data-acquisition products. The three operational amplifiers can support analog front ends, while the timer and I/O resources can handle periodic sensing and discrete control functions. PCB design should preserve clean analog and digital return paths, especially when the internal amplifiers process low-level signals. Place decoupling capacitors close to the supply pins, route sensitive analog inputs away from switching nodes, and use the manufacturer pin-description table when assigning package leads and programming functions. This product overview combines the core Tiny Gecko specifications, same-package replacement options, interface considerations, and practical selection guidance. It is designed to help engineers evaluate clock performance, memory capacity, peripheral integration, package compatibility, and low-power behavior before completing an embedded design.

Permintaan RFG Kontak
EFM32TG225F16-BGA48 - 32MHz Cortex-M3 16KB MCU | Silicon Labs
EFM32TG225F16-BGA48

EFM32TG225F16-BGA48 - 32MHz Cortex-M3 16KB MCU | Silicon Labs

The Silicon Labs EFM32TG225F16-BGA48 is an ARM Cortex-M3 Tiny Gecko microcontroller with a 32-bit architecture, 32 MHz operating frequency, and 16 KB of Flash memory in a 48-BGA package measuring 4 x 4 mm. The device operates from a 1.85 V to 3.8 V supply and combines low-power design with fast wake-up behavior, making it suitable for compact, energy-sensitive embedded systems. A microcontroller is a programmable semiconductor that integrates a processor core, memory, peripherals, and communication interfaces onto one package. The ARM Cortex-M3 core belongs to a compact embedded processor family designed for deterministic control tasks and energy-efficient operation. Within the product hierarchy, the EFM32TG225F16-BGA48 is a 32-bit microcontroller in the Silicon Labs Tiny Gecko family, providing greater processing capability than 8-bit designs while retaining a small system footprint. The EFM32TG225F16-BGA48 operates at up to 32 MHz and includes 16 KB of Flash, identified by the part number as 16K x 8 bits. Its 48-BGA package supports dense PCB layouts in applications where component area is limited. The 1.85 V to 3.8 V operating range accommodates low-voltage digital systems, while the listed 2.5 V and 3.3 V operating points align with common embedded supply requirements. The device is also identified with AES and operational-amplifier capabilities. The Tiny Gecko platform emphasizes low-power operation through energy-saving modes and rapid wake-up behavior. These characteristics matter in duty-cycled products because the controller can reduce consumption during inactive periods and resume processing quickly when an input, timer, or communication event requires attention. Its Cortex-M3 instruction set supports efficient event handling while providing a familiar software-development environment for embedded toolchains and peripheral configurations. Typical applications include low-power sensor nodes, compact industrial monitoring equipment, energy-aware IoT endpoints, wearable accessories, and embedded control modules. The small 48-BGA package is especially useful where PCB area is constrained, while the 32 MHz processing rate supports responsive control and communication routines. Designers should confirm memory requirements, peripheral assignments, pin functions, and power sequencing in the manufacturer datasheet before finalizing a layout. BGA assembly requires careful PCB design, including controlled pad geometry, appropriate solder-mask and paste patterns, adequate thermal conditions, and inspection coverage for hidden joints. Place stable decoupling close to the supply pins, confirm the operating voltage against every peripheral rail, and use the manufacturer pin-description table when assigning traces. This page also identifies compatible family alternatives and engineering guidance for evaluating a redesign. The information here combines the device architecture, package constraints, sourcing considerations, alternatives, and design guidance into one engineering-focused reference. It is intended to help developers assess whether the EFM32TG225F16-BGA48 matches a low-power, space-constrained control design before requesting a quote or beginning PCB implementation.

Permintaan RFG Kontak