Produk (21.000+)

EFM32PG1B200F256GM48-C0 - 256KB Flash ARM Cortex-M4 MCU | Silicon Labs
EFM32PG1B200F256GM48-C0

EFM32PG1B200F256GM48-C0 - 256KB Flash ARM Cortex-M4 MCU | Silicon Labs

The Silicon Labs EFM32PG1B200F256GM48-C0 is a 32-bit ARM Cortex-M4 microcontroller from the Pearl Gecko family, running at speeds up to 40 MHz with 256 KB of Flash and 32 KB of SRAM, housed in a 48-pin QFN (7x7 mm) package with exposed pad. It integrates a cryptographic hardware engine supporting AES, ECC, and SHA, alongside a full DSP instruction set and a single-precision floating-point unit (FPU), making it suitable for computationally intensive yet energy-constrained designs. An ARM Cortex-M4 microcontroller is a 32-bit processor core based on the ARMv7-M architecture, featuring Thumb-2 instruction set, hardware single-cycle multiply, optional single-precision IEEE 754 floating-point unit, and a tightly coupled Nested Vectored Interrupt Controller (NVIC). Pearl Gecko MCUs sit within the broader hierarchy of ARM Cortex-M MCUs (Cortex-M0/M0+ -> Cortex-M3 -> Cortex-M4 -> Cortex-M7) and are designed for general-purpose embedded applications requiring digital signal processing and low energy operation. Key specifications include an operating voltage range of 1.85 V to 3.8 V, 256 KB of program Flash, 32 KB of SRAM, a peripheral reflex system for autonomous inter-peripheral signaling, and a wide peripheral set including USART, I2C, SPI, timers, ADC, and capacitive touch sensing. The cryptographic accelerator supports AES-128/256, ECC, and SHA-1/SHA-2 with negligible CPU overhead, enabling secure boot, secure firmware update, and authenticated communication in IoT end nodes. Architecturally, the EFM32PG1B200 leverages Silicon Labs' low-energy platform with five energy modes (EM0 active through EM4 deep sleep), autonomous peripherals that operate in deep sleep without CPU intervention, and a fast 2 microsecond wake-up time. The QFN-48 package with exposed thermal pad (EP) provides a thermal resistance suitable for typical indoor and industrial ambient ranges without active cooling. Typical applications include battery-powered IoT sensor nodes, secure connected health devices, smart home and building automation controllers, wireless sensor networks with on-device encryption, industrial HMI panels, and low-power asset tracking tags. The integrated crypto engine and ARM TrustZone-ready architecture make it particularly suitable for edge devices that must perform authenticated transactions without compromising battery life. When designing with this device, allocate PCB copper under the exposed pad for thermal dissipation and ground return. The package's QFN-48 footprint requires careful reflow profile control; IPC/JEDEC J-STD-020 MSL3 handling is recommended. Decoupling requires 100 nF on each VDD pin plus a bulk 4.7 uF, and a 32.768 kHz crystal load capacitor selection must follow the Pearl Gecko reference manual for accurate RTC operation. This page synthesizes distributor pricing, drop-in alternative MPNs, and practical design notes not found in the manufacturer datasheet, including cross-brand pin-compatible options sourced from verified distributor cross-reference data.

Permintaan RFG Kontak
EFM32TG108F16-D-QFN24 - 32MHz Cortex-M3 MCU | Silicon Labs
EFM32TG108F16-D-QFN24

EFM32TG108F16-D-QFN24 - 32MHz Cortex-M3 MCU | Silicon Labs

Silicon Labs EFM32TG108F16-D-QFN24 is an ARM Cortex-M3 microcontroller operating up to 32 MHz, with 16 KB of Flash memory, 4 KB of RAM, and 17 digital I/O pins in a 24-QFN package measuring 5 mm by 5 mm. It combines a low-power MCU architecture with autonomous peripherals and energy-saving modes for embedded control applications. A microcontroller is a programmable semiconductor device that integrates a processor core, memory, digital I/O, timers, and communication peripherals into one compact component. The EFM32TG108 belongs to the Tiny Gecko family within the hierarchy of ARM Cortex microcontrollers, general-purpose embedded processors, and integrated semiconductor devices. Its compact package is intended to support space-constrained and battery-powered equipment. Principal features include a 32-bit ARM Cortex-M3 core, 16 KB Flash, 4 KB RAM, 17 digital I/O pins, and two 16-bit timers. The device operates from a 1.98 V to 3.8 V supply. Silicon Labs reports consumption as low as 0.6 µA in Stop mode and 150 µA/MHz in Run mode, making low-power state management important for duty-cycled designs. The Tiny Gecko platform emphasizes fast wake-up behavior, energy-saving operating modes, and autonomous peripheral operation. These characteristics allow timers and other peripherals to handle repetitive or time-critical tasks while the processor sleeps, reducing unnecessary software activity. The same 16 KB Flash configuration supports firmware storage, while the 4 KB RAM provides working memory for control routines, state handling, and short data buffers. Typical uses include connected sensor nodes, industrial monitoring modules, compact instrumentation, low-energy IoT equipment, and embedded control boards. The 17 GPIO pins allow the MCU to connect digital sensors, switches, status indicators, and actuators, while the two 16-bit timers support periodic measurement, timing, and event-counting functions. PCB design should preserve a clean return path around the exposed pad and place bypass capacitors close to the supply pins. Firmware should use the device's low-power modes deliberately, and every peripheral should be checked against its clock-gating behavior to ensure that current consumption matches the intended duty cycle. This page combines the manufacturer specifications with practical power-management guidance, interface considerations, and a focused comparison of same-family devices. It is designed to help engineers evaluate the EFM32TG108F16-D-QFN24 for low-power embedded systems without overlooking package, memory, or firmware constraints.

Permintaan RFG Kontak
EFM32TG108F16-QFN24 - 32MHz 16KB MCU | Silicon Labs
EFM32TG108F16-QFN24

EFM32TG108F16-QFN24 - 32MHz 16KB MCU | Silicon Labs

The Silicon Labs EFM32TG108F16-QFN24 is a 32-bit ARM Cortex-M3 Tiny Gecko microcontroller operating up to 32 MHz, with 16 KB of Flash memory and a 24-QFN (5 x 5 mm) package. Its verified supply-voltage range is 1.85 V to 3.8 V, making it suitable for low-voltage embedded systems, portable instruments, connected sensors, and energy-conscious battery-powered equipment. A microcontroller is a semiconductor device that integrates a processor core, program memory, working memory, and peripherals into one compact package. The EFM32TG108 belongs to the Tiny Gecko family, a low-power 32-bit microcontroller line built around the ARM Cortex-M3 architecture. Its position in the hierarchy is MCU, embedded microcontroller, embedded processor, and semiconductor. The architecture combines a 32 MHz maximum clock with energy-saving modes and short wake-up behavior intended for systems that spend substantial time in low-power states. The EFM32TG108F16-QFN24 provides 16 KB (16K x 8) of Flash for firmware and 32-bit processing through the ARM Cortex-M3 core. Its verified 24-QFN package measures 5 x 5 mm and is suitable for compact, surface-mounted designs. The operating range of 1.85 V to 3.8 V supports 2.5 V and 3.3 V system architectures, although individual external components and board-level voltage tolerances must still be checked. The supplied distributor listing identifies the MCU as an ARM Cortex-M3 Tiny Gecko part rated at 32 MHz. The principal technical benefit is efficient 32-bit processing in a small, low-power package. A 32 MHz clock provides useful computation headroom for protocol handling, control loops, signal acquisition, and system management without requiring a larger processor package. Low-power operation is particularly relevant when average energy per task, rather than peak processing speed, determines battery life. The available evidence does not specify the target device's RAM capacity, GPIO count, timer configuration, analog performance, or exact power-consumption figures, so those parameters should be confirmed in the manufacturer datasheet before final design release. Typical uses include wearable accessories, compact sensor nodes, industrial monitoring modules, energy meters, portable measurement products, and low-power embedded control boards. In each case, the device can act as the central controller, executing application firmware while using sleep states between infrequent events. Designers should size the decoupling network around the device-specific requirements in the EFM32TG108 datasheet and preserve adequate routing clearance for high-speed signals and radio-adjacent circuitry. The principal design consideration is avoiding unverified assumptions about the peripheral complement. Firmware drivers, pin multiplexing, programming interfaces, brownout behavior, and exact memory availability must be checked against the correct datasheet revision for the selected orderable MPN. This page combines the verified distributor specifications, package data, source links, and same-family replacement candidates into a practical sourcing and design reference. This product page additionally distinguishes verified characteristics from missing parameters, summarizes the strongest documented use cases, and identifies same-family QFN-24 alternatives without presenting uncertain cross-family parts as guaranteed drop-in replacements.

Permintaan RFG Kontak
EFM32TG108F16-QFN24T - 32MHz ARM Cortex-M3 MCU | Silicon Labs
EFM32TG108F16-QFN24T

EFM32TG108F16-QFN24T - 32MHz ARM Cortex-M3 MCU | Silicon Labs

The Silicon Labs EFM32TG108F16-QFN24T is a low-power, 32-bit ARM Cortex-M3 microcontroller operating up to 32 MHz, with 16 KB of Flash memory, 4 KB of RAM, and 17 digital I/O pins in a 24-QFN 5 mm × 5 mm package. It combines a 32-bit microcontroller, energy-saving modes, and autonomous peripherals in a compact surface-mount device for embedded and battery-powered systems. An energy-efficient microcontroller is a semiconductor designed to execute control logic while minimizing energy consumption during active and low-power operation. The EFM32 family belongs to the hierarchy of microcontroller, embedded processor, and low-power semiconductor. Its combination of Cortex-M3 processing, fast wake-up behavior, and multiple sleep states supports systems that must respond quickly while conserving energy between external events. Key device features include a maximum CPU frequency of 32 MHz, 16 KB of Flash, 4 KB of RAM, 17 digital I/O pins, and two 16-bit timers. The manufacturer datasheet also identifies autonomous peripherals, high analog integration, and energy-saving modes as central platform characteristics. These resources make the device suitable for compact sensors, portable instruments, industrial controls, and connected accessories that need more capability than an 8-bit controller. The EFM32TG architecture places the ARM Cortex-M3 processor within a highly integrated low-power platform. Flash supports firmware storage, RAM supports working state and stacks, and the timer resources support periodic measurement, timing, and control functions. According to the Silicon Labs EFM32TG data sheet, devices in this family can consume as little as 0.6 µA in Stop mode and approximately 150 µA/MHz in Run mode, providing useful benchmarks when comparing battery life and duty-cycled operation. Typical applications include battery-powered sensor nodes, wearable accessories, industrial condition-monitoring equipment, building controls, and portable measurement products. In these systems, the 17 I/O pins can connect digital sensors or control signals, while the two 16-bit timers can implement timing tasks. The 24-QFN package also reduces board area compared with larger leaded or exposed-outline packages, although its compact dimensions require careful PCB layout and thermal assessment. For PCB design, use the manufacturer's QFN land pattern and route the exposed thermal pad as specified in the datasheet. Keep decoupling capacitors close to the supply pins and provide clean grounding because high-frequency clocking and switching activity can couple into sensitive analog measurements. Verify the exact pin assignment in the package drawing before routing because QFN perimeter pads are closely spaced and exposed-pad connections must follow the recommended land geometry. This product page combines the manufacturer specifications, device-family positioning, application guidance, package considerations, and qualified same-footprint alternatives. It is intended to help engineers evaluate the EFM32TG108F16-QFN24T for low-power embedded designs before completing footprint, firmware, and supply-chain reviews.

Permintaan RFG Kontak
EFM32TG108F32-D-QFN24 - 32MHz Cortex-M3 MCU | Silicon Labs
EFM32TG108F32-D-QFN24

EFM32TG108F32-D-QFN24 - 32MHz Cortex-M3 MCU | Silicon Labs

Silicon Labs EFM32TG108F32-D-QFN24 is a low-power, 32-bit ARM Cortex-M3 microcontroller operating up to 32 MHz, with 32 kB Flash memory, 4 kB RAM, 17 digital I/O pins, and two 16-bit timers in a 24-QFN 5 x 5 mm package. The device is designed for energy-sensitive embedded systems that require efficient processing, compact implementation, and low-power operating modes. A microcontroller is a programmable semiconductor that integrates a processor core, memory, and peripherals into one device. The EFM32 Tiny Gecko MCU belongs to the hierarchy of embedded processors, microcontrollers, 32-bit ARM Cortex-M devices, and energy-efficient system-on-chip products. It combines real-time control capability with a compact package suitable for battery-operated and space-constrained products. Key specifications include a 32 MHz ARM Cortex-M3 core, 32 kB of Flash program memory, and 4 kB of RAM. The device provides 17 digital I/O pins and two 16-bit timers for sensor sampling, control-loop timing, pulse measurement, and general-purpose embedded tasks. Its specified operating supply range is 1.98 V to 3.8 V, supporting common low-voltage embedded systems. The Tiny Gecko platform emphasizes energy-efficient operation through low-power techniques, fast wake-up behavior, and energy-saving modes. These characteristics allow the processor to remain in a reduced-power state between short processing intervals while still responding quickly to external activity. The 24-QFN package also exposes the device in a compact surface-mount form factor suitable for densely populated control boards. Typical uses include battery-powered sensor nodes, industrial condition-monitoring equipment, compact energy meters, portable medical accessories, and IoT devices. The 17 I/O pins support external sensors and actuators, while the two 16-bit timers provide dedicated timing resources for periodic measurements and motor or control signals. PCB design should preserve clean supply decoupling, thermal copper, and clear access to programming and debug signals. Confirm the complete pin description and exposed-pad connection in the manufacturer pinout table before layout release, and validate the firmware, clock configuration, and low-power wake-up sequence on the final board. This page combines manufacturer specifications, package and memory details, application-oriented engineering guidance, and same-package replacement information to help engineers evaluate the EFM32TG108F32-D-QFN24 for low-power embedded designs.

Permintaan RFG Kontak
EFM32TG108F32-QFN24 - Tiny Gecko Cortex-M3 MCU, 32KB Flash | Silicon Labs
EFM32TG108F32-QFN24

EFM32TG108F32-QFN24 - Tiny Gecko Cortex-M3 MCU, 32KB Flash | Silicon Labs

The Silicon Labs EFM32TG108F32-QFN24 is an ARM Cortex-M3 based 32-bit microcontroller from the energy-friendly Tiny Gecko family, operating at speeds up to 32 MHz and housed in a 24-pin QFN (5x5 mm) package with exposed pad. The device integrates 32 kB of Flash memory and 4 kB of RAM, with 17 digital I/O pins, two 16-bit timers, and a rich low-energy peripheral set designed for battery-powered and energy-harvesting designs. A microcontroller (MCU) is a single-chip computer that contains a processor core, memory, and programmable input/output peripherals. Within the broader taxonomy of semiconductors, MCUs sit alongside microprocessors (MPUs) and DSPs as the principal embedded computing elements. The EFM32 Tiny Gecko family is positioned as an ultra-low-power Cortex-M3 line, sitting between the entry-level Zero Gecko (Cortex-M0+) and the higher-end Gecko/Giant Gecko (Cortex-M3/M4) families in Silicon Labs' portfolio. Key differentiating features include a Cortex-M3 core with up to 32 MHz operation, hardware AES encryption, a 12-bit ADC, low-energy UART and I2C peripherals capable of operation in deep sleep, and Silicon Labs' patented low-energy sensor interface (LESENSE). The peripheral reflex system (PRS) allows peripherals to communicate directly without CPU intervention, dramatically reducing active time and average current consumption. The 24-QFN package provides a compact footprint with an exposed thermal pad for improved heat dissipation in space-constrained designs. Architecturally, the EFM32TG108F32-QFN24 employs a low-leakage CMOS process with five energy modes (EM0-EM4), enabling current consumption as low as sub-microamp levels in deep sleep while retaining RAM and GPIO state. The integrated LDO and DC-DC converter interface, along with the on-chip brown-out detector and watchdog, simplify BOM and improve system reliability. Typical applications include battery-powered IoT sensor nodes, wearable health and fitness devices, remote keyless entry, energy harvesting systems, smart metering, and any application requiring ARM Cortex-M3 performance with the lowest possible active and sleep current. When designing with this device, ensure the exposed pad is soldered to a sufficient copper pour for thermal performance and that unused pins are configured in their defined reset state to minimize leakage.

Permintaan RFG Kontak
EFM32TG108F32-QFN24T - 32MHz Tiny Gecko MCU | Silicon Labs
EFM32TG108F32-QFN24T

EFM32TG108F32-QFN24T - 32MHz Tiny Gecko MCU | Silicon Labs

Silicon Labs EFM32TG108F32-QFN24T is a 32-bit ARM Cortex-M3 Tiny Gecko microcontroller operating up to 32 MHz, with 32 KB of Flash, 4 KB of RAM, and 17 digital I/O pins in a 24-QFN 5 mm × 5 mm package. Its 1.85 V to 3.8 V operating range and low-power architecture suit compact, energy-sensitive embedded systems. The device belongs to the microcontroller hierarchy that includes ARM Cortex-M3, embedded MCU, processor IC, and semiconductor. A low-power microcontroller is a processor integrated with memory, I/O, timers, and communication peripherals for control-oriented products. The EFM32TG platform emphasizes short wake-up periods and low consumption in both active and sleep states. According to the Silicon Labs EFM32TG datasheet, the family can consume as little as 0.6 µA in Stop mode and 150 µA/MHz in Run mode, making it useful where battery life, sleep current, and rapid reactivation are important. The EFM32TG108F32-QFN24T combines a 32 MHz Cortex-M3 core with 32 KB Flash and 4 KB RAM. Its integrated feature set includes 17 digital I/O pins and two 16-bit timers. The 24-QFN package measures 5 mm on each side, supporting compact layouts without requiring a large through-hole or high-pin-count package. The operating supply range of 1.85 V to 3.8 V accommodates common low-voltage embedded systems. Its low-power architecture combines normal processing with energy-saving modes and relatively short wake-up times. This makes the MCU suitable for systems that spend substantial time idle but must respond promptly to sensor, communication, or user-interface events. Peripheral integration reduces external component count in designs that require timing, general-purpose I/O, and embedded control functions. The Cortex-M3 architecture also provides a 32-bit processing environment while retaining a compact software model for embedded firmware. Typical applications include battery-powered sensor nodes, compact industrial monitors, wearable accessories, low-energy IoT endpoints, and embedded control modules. The combination of 32 KB Flash and 4 KB RAM is appropriate for firmware featuring protocol handling, state management, and modest local data processing. The 17 available digital I/O pins also support switches, indicators, sensors, and discrete control signals. Designers should calculate both average and peak supply demand, place decoupling capacitors close to the supply and ground pins, and confirm the exposed-pad connection and thermal layout against the manufacturer package drawing. Firmware should use the device's low-energy modes deliberately, because leaving the core active can consume substantially more power than the Stop-mode figure. The 1.85 V to 3.8 V range also requires attention to sensor and radio supply compatibility. This product page combines the manufacturer specifications with package-level guidance, verified replacement candidates, comparison criteria, and practical implementation considerations. It helps engineers narrow a Tiny Gecko selection by core architecture, memory capacity, clock rate, pin count, package, supply voltage, and low-power behavior before completing a firmware and PCB design.

Permintaan RFG Kontak
EFM32TG108F4-D-QFN24 - 32MHz Cortex-M3 4KB MCU | Silicon Labs
EFM32TG108F4-D-QFN24

EFM32TG108F4-D-QFN24 - 32MHz Cortex-M3 4KB MCU | Silicon Labs

Silicon Labs EFM32TG108F4-D-QFN24 is an ARM Cortex-M3 microcontroller with a maximum clock speed of 32 MHz, 4 KB of Flash memory, 2 KB of RAM, and 17 digital I/O pins, housed in a 24-QFN package measuring 5 mm by 5 mm. It belongs to the EFM32 Tiny Gecko family and is designed for compact, energy-sensitive embedded systems that require efficient processing, low-power operation, and rapid wake-up behavior. An EFM32 microcontroller is a 32-bit embedded processing IC that combines an ARM Cortex-M processor core with flash memory, RAM, general-purpose I/O, timers, communications peripherals, and low-energy management features. Within the product hierarchy, this device is an MCU, embedded controller, semiconductor, and energy-conscious alternative to more general-purpose microcontroller platforms when compact size and low standby consumption are important design priorities. The verified device data identifies an ARM Cortex-M3 core operating up to 32 MHz, 4 KB of programmable Flash organized as 4K by 8, 2 KB of SRAM, and 17 digital I/O pins. It also includes two 16-bit timers. Its small 5 mm by 5 mm QFN-24 land pattern supports dense PCB construction, while the 24-QFN package provides a practical surface-mount option for wearable, sensor, embedded-control, and connected peripheral designs. The Tiny Gecko architecture emphasizes energy-saving operating modes, fast wake-up times, and retention-oriented low-energy techniques. These characteristics are particularly valuable in battery-operated equipment where the controller may spend most of its time asleep and briefly process sensor readings, control outputs, or exchange data. The Cortex-M3 processor provides a substantially more capable instruction set than an 8-bit controller while retaining a compact, cost-conscious embedded footprint. Typical uses include low-power sensor nodes, compact industrial sensing modules, battery-powered accessories, wearable-device subcontrollers, building-control endpoints, and small instrumentation products. In these applications, the 4 KB Flash and 2 KB RAM favor firmware focused on control logic, sampling, local signal conditioning, and communications support rather than large graphical interfaces or extensive local data storage. Designers should verify the complete exposed-pad connection, pin multiplexing, decoupling requirements, programming interface, and operating limits against the manufacturer datasheet before layout release. The verified snippets provide the principal electrical and package information, but they do not expose the complete QFN-24 pin table or all timing and peripheral details, so unsupported values are not inferred in this data set. This page combines verified manufacturer and distributor specifications with package and lifecycle context, a strictly filtered replacement analysis, and engineering-oriented application guidance. It distinguishes confirmed parameters from missing details, making it more useful for preliminary design decisions and procurement than a distributor listing alone.

Permintaan RFG Kontak
EFM32TG108F4-D-QFN24R - 32MHz Cortex-M3 4KB MCU | Silicon Labs (Tape & Reel)
EFM32TG108F4-D-QFN24R

EFM32TG108F4-D-QFN24R - 32MHz Cortex-M3 4KB MCU | Silicon Labs (Tape & Reel)

Silicon Labs EFM32TG108F4-D-QFN24R is an ARM Cortex-M3 microcontroller with a maximum clock speed of 32 MHz, 4 KB of Flash memory, 2 KB of RAM, and 17 digital I/O pins, housed in a 24-QFN package measuring 5 mm by 5 mm. It belongs to the EFM32 Tiny Gecko family and is designed for compact, energy-sensitive embedded systems that require efficient processing, low-power operation, and rapid wake-up behavior. An EFM32 microcontroller is a 32-bit embedded processing IC that combines an ARM Cortex-M processor core with flash memory, RAM, general-purpose I/O, timers, communications peripherals, and low-energy management features. Within the product hierarchy, this device is an MCU, embedded controller, semiconductor, and energy-conscious alternative to more general-purpose microcontroller platforms when compact size and low standby consumption are important design priorities. The verified device data identifies an ARM Cortex-M3 core operating up to 32 MHz, 4 KB of programmable Flash organized as 4K by 8, 2 KB of SRAM, and 17 digital I/O pins. It also includes two 16-bit timers. Its small 5 mm by 5 mm QFN-24 land pattern supports dense PCB construction, while the 24-QFN package provides a practical surface-mount option for wearable, sensor, embedded-control, and connected peripheral designs. The Tiny Gecko architecture emphasizes energy-saving operating modes, fast wake-up times, and retention-oriented low-energy techniques. These characteristics are particularly valuable in battery-operated equipment where the controller may spend most of its time asleep and briefly process sensor readings, control outputs, or exchange data. The Cortex-M3 processor provides a substantially more capable instruction set than an 8-bit controller while retaining a compact, cost-conscious embedded footprint. Typical uses include low-power sensor nodes, compact industrial sensing modules, battery-powered accessories, wearable-device subcontrollers, building-control endpoints, and small instrumentation products. In these applications, the 4 KB Flash and 2 KB RAM favor firmware focused on control logic, sampling, local signal conditioning, and communications support rather than large graphical interfaces or extensive local data storage. Designers should verify the complete exposed-pad connection, pin multiplexing, decoupling requirements, programming interface, and operating limits against the manufacturer datasheet before layout release. The verified snippets provide the principal electrical and package information, but they do not expose the complete QFN-24 pin table or all timing and peripheral details, so unsupported values are not inferred in this data set. This page combines verified manufacturer and distributor specifications with package and lifecycle context, a strictly filtered replacement analysis, and engineering-oriented application guidance. It distinguishes confirmed parameters from missing details, making it more useful for preliminary design decisions and procurement than a distributor listing alone.

Permintaan RFG Kontak
EFM32TG108F4-QFN24 - 32MHz Cortex-M3 MCU | Silicon Labs
EFM32TG108F4-QFN24

EFM32TG108F4-QFN24 - 32MHz Cortex-M3 MCU | Silicon Labs

The Silicon Labs EFM32TG108F4-QFN24 is a 32-bit ARM Cortex-M3 microcontroller operating up to 32 MHz, with 4 KB of Flash memory, 2 KB of RAM, 17 digital I/O pins, two 16-bit timers, and a 24-QFN 5x5 mm package. It is designed for compact, energy-sensitive embedded systems requiring low-power operation, fast wake-up behavior, and efficient peripheral integration. A microcontroller is a programmable integrated circuit that combines a processor core, memory, and peripherals such as timers, communication interfaces, and I/O ports. The EFM32 Tiny Gecko MCU combines an ARM Cortex-M3 processor with energy-saving modes and low-power techniques. This places it within the embedded MCU hierarchy alongside 8-bit and 32-bit microcontrollers, supporting control, sensing, communications, and small system automation. The device provides 4 KB Flash for firmware storage and 2 KB RAM for working memory. Its 17 digital I/O pins enable external sensors, buttons, indicators, and control signals, while two 16-bit timers support periodic events, timing, and basic control functions. The 32 MHz Cortex-M3 core provides substantially more processing capability than typical low-end 8-bit designs while retaining a compact footprint. The EFM32TG108F4-QFN24 operates from a 1.85 V to 3.8 V supply according to the available product data. Its operating temperature is reported as -40°C to 85°C. The 24-QFN package is suitable for space-constrained PCB layouts and supports surface-mount assembly. The product data does not establish a public detailed pinout for every signal, so pin names and functions are marked as data needed rather than inferred. Typical applications include low-power sensor nodes, compact industrial controllers, embedded monitoring equipment, battery-powered instruments, and embedded communication modules. For designs requiring more memory, peripherals, or package pins, a larger MCU family member may be preferable. Before finalizing a footprint, verify the exact pin assignment, exposed-pad requirements, and decoupling recommendations against the manufacturer datasheet. This product page combines manufacturer specifications, distributor availability, pricing references, cross-reference results, and practical selection guidance to help engineers evaluate the EFM32TG108F4-QFN24 for embedded designs.

Permintaan RFG Kontak
EFM32TG108F4-QFN24T - 32MHz ARM Cortex-M3 MCU | Silicon Labs
EFM32TG108F4-QFN24T

EFM32TG108F4-QFN24T - 32MHz ARM Cortex-M3 MCU | Silicon Labs

Silicon Labs EFM32TG108F4-QFN24T is an ARM Cortex-M3 microcontroller IC with a 32 MHz maximum operating frequency, 4 kB of Flash memory, 2 kB of RAM, and 17 digital I/O pins in a 24-QFN 5 x 5 mm package. Designed for energy-sensitive embedded applications, the Tiny Gecko device combines low-power operating techniques, energy-saving modes, and fast wake-up behavior. An ARM Cortex-M3 microcontroller is a 32-bit reduced-instruction-set processor integrated with memory and peripherals into a single mixed-signal semiconductor. In the power-management hierarchy, the EFM32 family belongs to the energy-familial microcontroller class, combining general-purpose processing, embedded Flash and RAM, timers, communication interfaces, and low-power control in one package. The Tiny Gecko platform is intended for compact products where energy efficiency and deterministic operation are important. The EFM32TG108F4-QFN24T provides 4 kB of Flash, organized as 4K x 8, and 2 kB of SRAM for working memory. Its 17 digital I/O pins provide external connectivity for sensors, indicators, controls, and serial interfaces. Two 16-bit timers support periodic timing, pulse measurement, and control tasks. The verified device information also identifies an operating supply range of 1.85 V to 3.8 V and a maximum clock frequency of 32 MHz. The ARM Cortex-M3 core provides a 32-bit processing architecture with an integrated instruction pipeline, interrupt handling, and debug support. This is useful in compact control products that must combine low latency with restricted memory budgets. Because the device includes 4 kB of Flash and 2 kB of RAM, firmware size and buffering must be planned carefully; larger protocol libraries or graphical interfaces may require a higher-memory member of the EFM32 family. Typical uses for the EFM32TG108F4-QFN24T include low-power sensor nodes, compact industrial controls, battery-powered accessories, compact sensor-hub assemblies, and simple communication modules. Its 17 I/O pins and two timers are suitable for products that monitor external signals and coordinate periodic actions without requiring a large external interface controller. The 24-QFN package also supports compact PCB layouts when paired with appropriate exposed-pad assembly and thermal practices. Designers should budget flash and RAM carefully before finalizing application firmware, and should verify every peripheral assignment against the manufacturer pinout and reference manual. The QFN package requires inspection after soldering, while power, decoupling, and signal-routing decisions should follow the manufacturer hardware-design guidance. The tape-and-reel suffix T identifies the verified ordering option represented by this MPN. This product record consolidates the verified manufacturer specifications, current distributor references, package data, and engineering guidance into one engineering-oriented resource. It also distinguishes verified facts from unavailable detailed electrical parameters, helping designers compare the device without silently substituting estimated pinout or electrical data.

Permintaan RFG Kontak
EFM32TG108F8-D-QFN24 - 32MHz Cortex-M3 MCU | Silicon Labs
EFM32TG108F8-D-QFN24

EFM32TG108F8-D-QFN24 - 32MHz Cortex-M3 MCU | Silicon Labs

The Silicon Labs EFM32TG108F8-D-QFN24 is a 32-bit ARM Cortex-M3 Tiny Gecko microcontroller operating up to 32 MHz, with 8 kB Flash, 2 kB RAM, 17 digital I/O pins, and a 24-QFN (5x5) package. It combines a compact microcontroller architecture with low-power operating modes, fast wake-up behavior, and energy-saving techniques designed for embedded and battery-powered systems. A microcontroller is a programmable semiconductor that integrates a processor core, memory, I/O ports, timers, and communication peripherals on one device. The EFM32TG108 belongs to the Tiny Gecko family, a subcategory of 32-bit ARM Cortex-M3 microcontrollers within the broader embedded processor and semiconductor hierarchy. Its low-power platform is intended to reduce energy consumption when the system must operate for long periods with limited available power. The EFM32TG108F8-D-QFN24 combines a 32 MHz ARM Cortex-M3 core with 8 kB of Flash and 2 kB of RAM. Verified manufacturer and distributor information identifies 17 digital I/O pins and two 16-bit timers. Its 24-QFN package measures 5x5 mm, making it suitable for compact PCB layouts where a reduced footprint is important. The device also supports hardware debugging through a two-pin serial-wire debug interface and includes a one-wire Serial Wire Viewer connection. Silicon Labs positions the Tiny Gecko family around energy efficiency without giving up a 32-bit processor or a broad set of integrated peripherals. The part can operate from a 1.98 V to 3.8 V supply, which allows placement in low-voltage embedded systems. Its microcontroller architecture supports conventional low-power modes, short wake-up times, and energy-saving operation for applications that spend substantial time idle. Typical uses for the EFM32TG108F8-D-QFN24 include battery-powered sensors, compact industrial monitoring nodes, wearable accessories, low-power connected devices, energy-harvesting equipment, and embedded control modules. The 32 MHz Cortex-M3 core is suitable for responsive control logic, while the low-power platform is valuable where average power consumption matters more than sustained processing throughput. Designers should confirm the complete peripheral mapping, exposed-pad connection, and decoupling requirements against the manufacturer datasheet before layout release. The QFN thermal pad must be connected according to the recommended land pattern and thermal strategy, while debug access and programming-test points should be considered early in the PCB design. This page consolidates manufacturer specifications, distributor availability information, same-family drop-in candidates, package-level comparison data, and practical design guidance. It adds engineering context beyond a basic parameter list so engineers can assess memory fit, power architecture, pin compatibility, and sourcing trade-offs before selecting a microcontroller.

Permintaan RFG Kontak
EFM32TG108F8-D-QFN24R - 32MHz Cortex-M3 MCU | Silicon Labs (Tape & Reel)
EFM32TG108F8-D-QFN24R

EFM32TG108F8-D-QFN24R - 32MHz Cortex-M3 MCU | Silicon Labs (Tape & Reel)

The Silicon Labs EFM32TG108F8-D-QFN24R is a 32-bit ARM Cortex-M3 Tiny Gecko microcontroller operating up to 32 MHz, with 8 kB Flash, 2 kB RAM, 17 digital I/O pins, and a 24-QFN (5x5) package. It combines a compact microcontroller architecture with low-power operating modes, fast wake-up behavior, and energy-saving techniques designed for embedded and battery-powered systems. A microcontroller is a programmable semiconductor that integrates a processor core, memory, I/O ports, timers, and communication peripherals on one device. The EFM32TG108 belongs to the Tiny Gecko family, a subcategory of 32-bit ARM Cortex-M3 microcontrollers within the broader embedded processor and semiconductor hierarchy. Its low-power platform is intended to reduce energy consumption when the system must operate for long periods with limited available power. The EFM32TG108F8-D-QFN24R combines a 32 MHz ARM Cortex-M3 core with 8 kB of Flash and 2 kB of RAM. Verified manufacturer and distributor information identifies 17 digital I/O pins and two 16-bit timers. Its 24-QFN package measures 5x5 mm, making it suitable for compact PCB layouts where a reduced footprint is important. The device also supports hardware debugging through a two-pin serial-wire debug interface and includes a one-wire Serial Wire Viewer connection. Silicon Labs positions the Tiny Gecko family around energy efficiency without giving up a 32-bit processor or a broad set of integrated peripherals. The part can operate from a 1.98 V to 3.8 V supply, which allows placement in low-voltage embedded systems. Its microcontroller architecture supports conventional low-power modes, short wake-up times, and energy-saving operation for applications that spend substantial time idle. Typical uses for the EFM32TG108F8-D-QFN24R include battery-powered sensors, compact industrial monitoring nodes, wearable accessories, low-power connected devices, energy-harvesting equipment, and embedded control modules. The 32 MHz Cortex-M3 core is suitable for responsive control logic, while the low-power platform is valuable where average power consumption matters more than sustained processing throughput. Designers should confirm the complete peripheral mapping, exposed-pad connection, and decoupling requirements against the manufacturer datasheet before layout release. The QFN thermal pad must be connected according to the recommended land pattern and thermal strategy, while debug access and programming-test points should be considered early in the PCB design. This page consolidates manufacturer specifications, distributor availability information, same-family drop-in candidates, package-level comparison data, and practical design guidance. It adds engineering context beyond a basic parameter list so engineers can assess memory fit, power architecture, pin compatibility, and sourcing trade-offs before selecting a microcontroller.

Permintaan RFG Kontak
EFM32TG108F8-QFN24 - 32MHz ARM Cortex-M3 MCU | Silicon Labs
EFM32TG108F8-QFN24

EFM32TG108F8-QFN24 - 32MHz ARM Cortex-M3 MCU | Silicon Labs

The Silicon Labs EFM32TG108F8-QFN24 is an ARM Cortex-M3 microcontroller (MCU) operating up to 32 MHz, with 8 kB Flash, 2 kB RAM, 17 digital I/O pins, and two 16-bit timers, housed in a 24-QFN package. The device is built on Silicon Labs' Tiny Gecko low-power platform, emphasizing energy efficiency, fast wake-up, and low-power operating modes for battery-operated and energy-sensitive systems. A microcontroller is a compact embedded-computing device that integrates a processor core, memory, and peripherals into one integrated circuit. The EFM32TG family belongs to the ARM Cortex-M microcontroller class and the broader embedded processor hierarchy. Its low-power platform includes energy-saving modes intended to extend operating time when the system is mostly idle and must wake quickly for intermittent sensing, control, or communications. The EFM32TG108F8-QFN24 provides an ARM Cortex-M3 core, 8 kB of Flash, and 2 kB of RAM. Its 17 digital I/O pins support compact embedded designs that need discrete input and output functions without a larger package. Two 16-bit timers provide timing resources for periodic activities, sensor sampling, timing interfaces, or motor and actuator control. Its 24-QFN package is specified as 5 mm by 5 mm with an exposed pad. The 32 MHz operating speed provides deterministic processing performance for control-oriented applications while retaining a compact, low-power architecture. The combination of Cortex-M3 processing, integrated memories, timers, and digital I/O makes the device suitable for small embedded products where board area, energy use, and rapid wake-up behavior are important design constraints. Typical applications include battery-operated sensors, IoT endpoint nodes, compact industrial controllers, building automation interfaces, low-power instrumentation, and wearable or portable products. In these systems, the MCU can sleep between events, wake for a measurement or control task, and return to a low-power state while the timers and digital I/O support local system behavior. Designers should confirm the exact pin functions, exposed-pad connection, decoupling requirements, and programming setup from the manufacturer datasheet before layout. The QFN thermal pad and exposed-pad layout should follow the package drawing, while firmware should account for the device's low-power states and wake-up sources to achieve the intended battery life.

Permintaan RFG Kontak
EFM32TG108F8-QFN24T - 32MHz ARM Cortex-M3 MCU | Silicon Labs
EFM32TG108F8-QFN24T

EFM32TG108F8-QFN24T - 32MHz ARM Cortex-M3 MCU | Silicon Labs

Silicon Labs EFM32TG108F8-QFN24T is a 32-bit ARM Cortex-M3 Tiny Gecko microcontroller rated up to 32 MHz, with 8 KB Flash memory, 2 KB RAM, and 17 digital I/O pins. It is housed in a 24-QFN package measuring 5 mm by 5 mm and operates from a 1.85 V to 3.8 V supply. The MCU also includes two 16-bit timers for timing, event counting, and periodic control functions. A microcontroller is a programmable semiconductor that combines a processor core, memory, and peripherals on one integrated circuit. The ARM Cortex-M3 core places the EFM32TG108F8-QFN24T in the 32-bit embedded-controller hierarchy, while the Tiny Gecko platform adds energy-saving operating modes and rapid wake-up behavior. These characteristics make the device relevant to battery-operated products and other embedded systems where processing capability must be balanced against energy use. The principal resource limits are 8 KB of Flash and 2 KB of RAM. Flash stores executable code and nonvolatile configuration data, while RAM supports working variables, stack operations, and peripheral data. With 17 digital I/O pins, the device can connect external sensors, controls, indicators, and communication peripherals. Two dedicated 16-bit timers can provide periodic interrupts, elapsed-time measurement, pulse counting, or basic motor and timing functions. The 32 MHz Cortex-M3 processor provides substantially greater arithmetic capacity than an 8-bit controller while retaining a compact embedded architecture. Silicon Labs designed the Tiny Gecko family around low-power techniques, short wake-up times, and energy-saving modes. Those features make the MCU useful where the equipment spends substantial time idle but must respond quickly when a user action, sensor event, or scheduled task occurs. Typical uses include battery-powered sensor nodes, compact industrial controls, wearable accessories, smart-home endpoints, and low-power instrumentation. The 24-QFN footprint supports dense PCB layouts, but its exposed thermal and electrical requirements should be evaluated during layout. Firmware size must also remain within the 8 KB Flash constraint, which can be more restrictive than the nominal clock speed. A principal design consideration is matching the firmware footprint to the available memory. Two timers and 17 I/O pins provide useful connectivity, but the small RAM limit requires careful buffer sizing and stack budgeting. Decoupling, ground-return planning, and exposed-pad thermal management are equally important in compact single-board designs. This product record combines manufacturer specifications, family-level alternatives, package information, and practical design guidance to support faster MCU selection. It emphasizes the 32 MHz operating speed, 8 KB Flash, 2 KB RAM, 1.85 V to 3.8 V supply range, and 24-QFN footprint as the decisive engineering characteristics for embedded-system planning.

Permintaan RFG Kontak
EFM32TG110F16-D-QFN24 - 32MHz Cortex-M3 16KB MCU | Silicon Labs
EFM32TG110F16-D-QFN24

EFM32TG110F16-D-QFN24 - 32MHz Cortex-M3 16KB MCU | Silicon Labs

The Silicon Labs EFM32TG110F16-D-QFN24 is a 32-bit ARM Cortex-M3 microcontroller with a maximum clock frequency of 32 MHz, 16 kB of Flash memory, 4 kB of RAM, and 17 digital I/O pins, housed in a 24-QFN package measuring 5 mm by 5 mm. Its combination of a 32-bit processor, autonomous peripherals, and energy-saving operating modes targets compact, low-power embedded systems. A microcontroller is a programmable semiconductor that integrates a processor core, memory, digital interfaces, timers, and analog peripherals onto one device. In the system hierarchy, the EFM32TG110F16-D-QFN24 belongs to the ARM Cortex-M microcontroller class, combining real-time processing with low-power operation. This makes it suitable for battery-powered sensors, compact industrial controllers, wearable accessories, and connected equipment that must balance processing capability with energy consumption. Key device features include 16 kB of Flash program memory, 4 kB of RAM, 17 digital I/O pins, two 16-bit timers, and a maximum operating frequency of 32 MHz. The EFM32TG family uses autonomous peripherals and energy-management modes to reduce activity in duty-cycled systems. According to the manufacturer datasheet, the family can consume as little as 0.6 µA in Stop mode and 150 µA/MHz in Run mode, supporting designs in which the processor remains idle during extended intervals. The EFM32TG110F16-D-QFN24 is built around the ARM Cortex-M3 processor and supports two-wire Serial Wire Debug. A separate one-wire Serial Wire Viewer interface can provide profiling information, data trace, and software-generated messages. These debugging resources make it possible to inspect low-power behavior without requiring a full high-pin-count debug interface, while the 32 MHz clock rate supports responsive control and communication tasks. Typical applications include low-power sensor nodes, building controls, compact industrial automation modules, battery-operated accessories, and embedded IoT products. The device is particularly suitable when a design needs more processing capability than an 8-bit controller but does not require the memory or I/O capacity of a larger application processor. PCB design should preserve the exposed-pad thermal and electrical requirements of the 24-QFN package, place decoupling capacitors close to the supply pins, and provide clean routing for the Serial Wire Debug interface. Confirm the exact pin assignments and exposed-pad connection in the manufacturer pinout table before laying out a new board. This product record combines the manufacturer specifications, package information, memory resources, low-power characteristics, and engineering guidance needed to evaluate the EFM32TG110F16-D-QFN24 for compact, low-power embedded designs.

Permintaan RFG Kontak
EFM32TG110F16-QFN24 - 32MHz Cortex-M3 MCU | Silicon Labs
EFM32TG110F16-QFN24

EFM32TG110F16-QFN24 - 32MHz Cortex-M3 MCU | Silicon Labs

The Silicon Labs EFM32TG110F16-QFN24 is an ARM Cortex-M3 32-bit microcontroller rated up to 32 MHz, with 16 kB of Flash memory and 4 kB of RAM in a 24-QFN 5 x 5 mm surface-mount package. The device includes 17 digital I/O pins, two 16-bit timers, AES and operational-amplifier functions, and operates from a 1.85 V to 3.8 V supply range. A microcontroller is a programmable system-on-chip combining a processor core, nonvolatile program memory, volatile working memory, and peripherals such as timers, communication interfaces, analog blocks, and general-purpose I/O. The EFM32 Tiny Gecko family belongs to the 32-bit embedded MCU hierarchy and is designed for battery-operated and energy-sensitive equipment. Its Cortex-M3 architecture supports efficient control processing while the low-energy platform emphasizes short wake-up times and energy-saving modes. The principal features of the EFM32TG110F16-QFN24 include its 32 MHz operating speed, 16 kB Flash program storage, 4 kB RAM, 17 digital I/O pins, and two 16-bit timers. The manufacturer also identifies AES hardware and an operational amplifier among the device capabilities. Its 24-QFN package includes an exposed pad and measures 5 x 5 mm, supporting compact designs where board area and supply current are important constraints. Technically, the part combines an ARM Cortex-M3 instruction set with Silicon Labs low-energy techniques. The 1.85 V to 3.8 V operating range accommodates low-voltage embedded systems, including systems powered from a regulated 3.3 V rail or suitable battery-derived supply. Flash memory provides durable firmware storage, while the 4 kB RAM supports working state, stack operations, buffers, and peripheral data handling. The 17 digital I/O pins allow external sensors, indicators, controls, and communication devices to be connected without relying entirely on dedicated peripherals. Typical applications include low-power sensor nodes, wearable electronics, compact industrial controls, battery-powered instruments, connected IoT equipment, and small control modules. The device is particularly appropriate where frequent wake-up, low idle consumption, fast control response, and local processing are more important than large memory capacity. Designers should follow the manufacturer datasheet for the complete QFN-24 pin map, exposed-pad connection, decoupling requirements, and GPIO limitations. Because the exposed pad is part of the thermal and electrical design, the PCB should provide suitable copper and a recommended land pattern. Firmware configuration, clock setup, and peripheral initialization must also follow the EFM32 Tiny Gecko reference material. This product overview combines the manufacturer device specifications with practical selection criteria, application guidance, package considerations, and clearly identified alternatives. It helps engineers determine whether the EFM32TG110F16-QFN24 provides sufficient processing speed, memory, I/O, and low-voltage operation for a compact embedded design before beginning layout and firmware development.

Permintaan RFG Kontak
EFM32TG110F32-D-QFN24 - 32MHz Cortex-M3 MCU | Silicon Labs
EFM32TG110F32-D-QFN24

EFM32TG110F32-D-QFN24 - 32MHz Cortex-M3 MCU | Silicon Labs

The Silicon Labs EFM32TG110F32-D-QFN24 is a 32-bit ARM Cortex-M3 microcontroller operating up to 32 MHz, with 32 KB of flash memory and 4 KB of RAM, housed in a 24-pin QFN 5 mm × 5 mm package. It belongs to the Tiny Gecko family and combines a low-power MCU platform with fast wake-up behavior, AES hardware, an operational amplifier, timers, and energy-saving modes for embedded control designs. A microcontroller is a programmable system-on-chip that integrates a CPU, memory, and peripherals such as GPIO, timers, communications interfaces, and analog blocks. The EFM32TG110 is specifically designed around the ARM Cortex-M3 processor. In the product hierarchy, Cortex-M3 is a 32-bit ARM processor core, while the EFM32TG110 is a low-power microcontroller, and the Tiny Gecko family is a Silicon Labs MCU product family intended for battery-operated and energy-sensitive equipment. The EFM32TG110F32-D-QFN24 provides 32 KB of flash, 4 KB of RAM, 17 digital I/O pins, and two 16-bit timers according to the manufacturer product page. Its maximum CPU frequency is 32 MHz. The device also includes AES hardware and an operational amplifier, allowing security-oriented and analog signal-conditioning functions to be integrated without requiring separate components. Its 24-QFN package supports compact PCB layouts while providing substantial peripheral capability for its size. The Tiny Gecko architecture emphasizes energy efficiency through low-power operating modes and short wake-up times. This architecture is useful when the controller must remain responsive while consuming little power between user events. Compared with a continuously active general-purpose processor, the EFM32TG110 can spend more time in an energy-saving state and resume processing rapidly when required. Firmware can therefore balance responsiveness against average current consumption in battery-powered systems. Typical applications include low-power sensor nodes, wearable accessories, compact industrial controllers, connected accessories, and embedded instruments. The 32 KB flash capacity is suitable for moderate firmware workloads, while the 4 KB RAM supports control buffers and application state. The integrated AES block can accelerate compatible cryptographic operations, and the operational amplifier can reduce the component count in analog front ends when its operating limits suit the design. Hardware implementation requires careful attention to the EFM32 power-domain connections. The manufacturer documentation states that AVDD_x, VDD_DREG, and IOVDD_x must be connected together at the PCB level, with an optional filter. Place these connections and their decoupling capacitors as directed by the manufacturer application note AN0002, EFM32 Hardware Design Considerations, and provide clean, properly sequenced supply paths for reliable operation. This product overview combines the manufacturer specifications with practical guidance for low-power firmware, analog integration, secure data handling, and PCB implementation. It also supports direct comparison with pin-compatible Tiny Gecko options, helping engineers select a flash-memory capacity that matches the firmware and application requirements without changing the board footprint.

Permintaan RFG Kontak
EFM32TG110F32-QFN24T - 32MHz Cortex-M3 MCU | Silicon Labs
EFM32TG110F32-QFN24T

EFM32TG110F32-QFN24T - 32MHz Cortex-M3 MCU | Silicon Labs

Silicon Labs EFM32TG110F32-QFN24T is a 32-bit ARM Cortex-M3 microcontroller rated up to 32 MHz, with 32 kB of Flash memory, 4 kB of RAM, and 17 digital I/O pins. The device is offered in a 24-QFN surface-mount package with an exposed pad and is supplied in tape-and-reel format under the T suffix. A microcontroller is a programmable semiconductor that integrates a processor core, memory, digital I/O, timers, analog interfaces, and communication peripherals on one integrated circuit. The EFM32TG110 belongs to Silicon Labs' Tiny Gecko family, a low-power 32-bit MCU product hierarchy designed for battery-operated systems, portable instruments, connected sensors, and industrial devices. Its ARM Cortex-M3 core provides a 32-bit instruction set and a familiar embedded software platform. The headline specifications are a maximum clock speed of 32 MHz, 32 kB of Flash, and 4 kB of RAM. Silicon Labs specifies 17 digital I/O pins, two 16-bit timers, and an operating supply range of 1.85 V to 3.8 V. The family also emphasizes low-power operation, with the EFM32TG data sheet reporting consumption as low as 0.6 uA in Stop mode and 150 uA/MHz in Run mode. The integrated feature set makes the EFM32TG110 suitable for designs that need more processing capability than an 8-bit controller without moving to a larger, higher-power MCU. Peripherals can perform measurements, timing, and control tasks while the processor sleeps, helping reduce overall energy use in duty-cycled systems. The 32 kB Flash capacity is appropriate for compact firmware, while 4 kB of RAM supports protocol buffers, sampled data, and application state. Typical uses include low-power sensor nodes, compact industrial monitoring equipment, battery-powered accessories, wearable electronics, and connected IoT products. In each case, the combination of a 32 MHz Cortex-M3 core, low-power modes, and a small 24-QFN footprint supports responsive control without requiring a large system-on-chip. The exposed thermal pad also provides a direct heat-spreading path on multilayer PCBs. Hardware design must follow Silicon Labs' power and grounding recommendations. The EFM32TG requires AVDD_x, VDD_DREG, and IOVDD_x to be connected together, optionally through a filter, as described in the EFM32TG data sheet and AN0002 EFM32 Hardware Design Considerations. Careful placement of decoupling capacitors, a continuous ground plane, and adequate exposed-pad thermal vias is essential for stable operation and predictable electromagnetic performance. This page combines manufacturer specifications, package information, drop-in family alternatives, application guidance, and PCB-oriented engineering notes. It also distinguishes the F32 memory configuration from lower-memory Tiny Gecko variants and identifies where firmware capacity, RAM requirements, temperature grade, or packaging must be checked before approving a replacement.

Permintaan RFG Kontak
EFM32TG110F4-D-QFN24 - 32MHz Cortex-M3 MCU | Silicon Labs
EFM32TG110F4-D-QFN24

EFM32TG110F4-D-QFN24 - 32MHz Cortex-M3 MCU | Silicon Labs

The Silicon Labs EFM32TG110F4-D-QFN24 is a 32-bit ARM Cortex-M3 microcontroller rated up to 32 MHz, with 4 kB of Flash memory, 2 kB of RAM, and 17 digital I/O pins in a 24-QFN package measuring 5 x 5 mm. It operates from a 1.98 V to 3.8 V supply and is designed for compact, energy-sensitive embedded systems. A microcontroller is a programmable semiconductor that integrates a processor core, memory, and peripherals into one package. The EFM32TG110 belongs to the Tiny Gecko family, a low-power 32-bit MCU platform suited to battery-powered and portable equipment. This device combines the ARM Cortex-M3 instruction set with energy-saving modes, fast wake-up behavior, and autonomous peripheral capabilities. The primary verified features of the EFM32TG110F4-D-QFN24 include a maximum CPU speed of 32 MHz, 4 kB of Flash, 2 kB of RAM, and 17 digital I/O pins. Its hardware also provides two 16-bit timers, an AES-capable feature set identified in distributor listings, an operational amplifier, a temperature sensor, a voltage comparator, and a flexible clock system that includes a 32.768 kHz crystal oscillator option. The device is positioned as a low-power platform with run consumption specified by the manufacturer datasheet as 150 uA/MHz and Stop-mode consumption as low as 0.6 uA. Its architecture allows peripherals to perform routine measurements, comparisons, timing, and communications without continuous CPU intervention. This can reduce processing demand in systems that periodically wake, acquire information, transmit data, and return to a low-energy state. Typical uses include sensor nodes, compact industrial controls, wearable accessories, connected measurement equipment, and low-power embedded products. The 5 x 5 mm 24-QFN package supports space-constrained designs, while the 17 digital I/O pins provide connections for sensors, indicators, communications, and control signals. The limited 4 kB Flash and 2 kB RAM make firmware and application data sizing particularly important. When designing around this MCU, connect AVDD_x, VDD_DREG, and IOVDD_x as directed by the manufacturer hardware-design guidance and preserve the recommended decoupling layout. Confirm startup behavior, clock selection, exposed-pad soldering, and peripheral pin assignments against the EFM32TG110 datasheet before releasing a PCB for production. This product record combines verified manufacturer specifications, distributor pricing, same-family drop-in alternatives, and practical design guidance. It emphasizes the constraints that matter when selecting a 4 kB-Flash, 2 kB-RAM Cortex-M3 MCU for compact and energy-conscious equipment.

Permintaan RFG Kontak
EFM32TG110F4-D-QFN24R - 32MHz Cortex-M3 MCU | Silicon Labs (Tape & Reel)
EFM32TG110F4-D-QFN24R

EFM32TG110F4-D-QFN24R - 32MHz Cortex-M3 MCU | Silicon Labs (Tape & Reel)

The Silicon Labs EFM32TG110F4-D-QFN24R is a 32-bit ARM Cortex-M3 microcontroller rated up to 32 MHz, with 4 kB of Flash memory, 2 kB of RAM, and 17 digital I/O pins in a 24-QFN package measuring 5 x 5 mm. It operates from a 1.98 V to 3.8 V supply and is designed for compact, energy-sensitive embedded systems. A microcontroller is a programmable semiconductor that integrates a processor core, memory, and peripherals into one package. The EFM32TG110 belongs to the Tiny Gecko family, a low-power 32-bit MCU platform suited to battery-powered and portable equipment. This device combines the ARM Cortex-M3 instruction set with energy-saving modes, fast wake-up behavior, and autonomous peripheral capabilities. The primary verified features of the EFM32TG110F4-D-QFN24R include a maximum CPU speed of 32 MHz, 4 kB of Flash, 2 kB of RAM, and 17 digital I/O pins. Its hardware also provides two 16-bit timers, an AES-capable feature set identified in distributor listings, an operational amplifier, a temperature sensor, a voltage comparator, and a flexible clock system that includes a 32.768 kHz crystal oscillator option. The device is positioned as a low-power platform with run consumption specified by the manufacturer datasheet as 150 uA/MHz and Stop-mode consumption as low as 0.6 uA. Its architecture allows peripherals to perform routine measurements, comparisons, timing, and communications without continuous CPU intervention. This can reduce processing demand in systems that periodically wake, acquire information, transmit data, and return to a low-energy state. Typical uses include sensor nodes, compact industrial controls, wearable accessories, connected measurement equipment, and low-power embedded products. The 5 x 5 mm 24-QFN package supports space-constrained designs, while the 17 digital I/O pins provide connections for sensors, indicators, communications, and control signals. The limited 4 kB Flash and 2 kB RAM make firmware and application data sizing particularly important. When designing around this MCU, connect AVDD_x, VDD_DREG, and IOVDD_x as directed by the manufacturer hardware-design guidance and preserve the recommended decoupling layout. Confirm startup behavior, clock selection, exposed-pad soldering, and peripheral pin assignments against the EFM32TG110 datasheet before releasing a PCB for production. This product record combines verified manufacturer specifications, distributor pricing, same-family drop-in alternatives, and practical design guidance. It emphasizes the constraints that matter when selecting a 4 kB-Flash, 2 kB-RAM Cortex-M3 MCU for compact and energy-conscious equipment.

Permintaan RFG Kontak
EFM32TG110F4-QFN24 - 32MHz ARM Cortex-M3 MCU | Silicon Labs
EFM32TG110F4-QFN24

EFM32TG110F4-QFN24 - 32MHz ARM Cortex-M3 MCU | Silicon Labs

Silicon Labs EFM32TG110F4-QFN24 is a 32-bit ARM Cortex-M3 microcontroller operating up to 32 MHz, with 4 kB Flash, 2 kB RAM, 17 digital I/O pins, and two 16-bit timers in a 24-QFN package. The device is designed around EFM32 Tiny Gecko energy-saving techniques, including fast wake-up behavior and low-power modes, making it suitable for battery-operated and energy-sensitive embedded systems. An ARM Cortex-M3 microcontroller is a 32-bit reduced-instruction-computing processor core designed for embedded control. The Cortex-M3 combines deterministic interrupt handling, compact code footprint, and integrated support for energy-efficient system design. In the Silicon Labs hierarchy, the MCU integrates the processor core, Flash memory, RAM, clock circuitry, timers, communication peripherals, and low-power management into one package. The EFM32TG110F4-QFN24 provides 4 kB of Flash for program storage and 2 kB of RAM for working data. Its 17 digital I/O pins support digital sensing and control functions, while two 16-bit timers support timing, pulse measurement, and periodic event generation. The 32 MHz processor speed provides headroom for control loops and lightweight signal-processing tasks in compact systems. The Tiny Gecko platform emphasizes low-energy operation, fast wake-up from energy-saving states, and energy-saving modes. These characteristics are relevant when the average current budget is determined by long sleep intervals rather than continuous processing. The MCU can therefore be used in portable instrumentation, sensor nodes, small industrial controls, and connected low-power products where minimizing energy consumption is more important than maximum flash capacity. Typical applications include battery-powered sensor nodes, compact industrial monitors, low-power wireless peripherals, consumer accessories, and embedded control modules. Designers should select external crystals or timing components according to the required clock accuracy, connect decoupling capacitors close to the supply pins, and confirm the exposed-pad thermal and layout requirements in the manufacturer datasheet. This page combines the verified manufacturer specifications, distributor references, package information, and design guidance for engineers evaluating the EFM32TG110F4-QFN24. It emphasizes the distinction between verified device characteristics and parameters that must be confirmed from the complete datasheet before PCB release or production qualification.

Permintaan RFG Kontak
EFM32TG110F4-QFN24T - 32MHz Cortex-M3 MCU | Silicon Labs
EFM32TG110F4-QFN24T

EFM32TG110F4-QFN24T - 32MHz Cortex-M3 MCU | Silicon Labs

Silicon Labs EFM32TG110F4-QFN24T is a 32-bit ARM Cortex-M3 microcontroller operating up to 32 MHz, with 4 KB of Flash memory, 2 KB of RAM, 17 digital I/O pins, and a 24-QFN 5 x 5 mm package. Its low-power platform supports energy-sensitive embedded systems with fast wake-up and energy-saving operating modes. A microcontroller is a programmable semiconductor that integrates a processor core, memory, peripherals, and I/O into one compact device. The EFM32TG110 belongs to the Tiny Gecko family of 32-bit ARM Cortex-M3 microcontrollers, a branch of embedded processors designed for low-power control, sensing, communications, and user-interface functions. Its 24-pin QFN package also supports compact, high-density PCB layouts. Key device features include a 32 MHz Cortex-M3 core, 4 KB of Flash program memory, 2 KB of SRAM, 17 digital I/O pins, two 16-bit timers, three operational amplifiers, and AES hardware support. The operating supply range of 1.85 V to 3.8 V suits both 2.5 V and 3.3 V system rails. These resources are intended for modest control tasks where energy efficiency, rapid startup, and peripheral integration matter more than large memory capacity. The Cortex-M3 processor uses the ARM Thumb instruction set and provides a conventional embedded software ecosystem. Hardware peripherals reduce processor workload for timing, analog measurements, communications, and data-security functions. The integrated operational amplifiers can support analog signal conditioning, while AES support provides a hardware path for encrypted data handling. Firmware development requires suitable ARM debugging tools, a driver library, and a board configured for the device power, clock, reset, and programming interface. Typical uses include battery-powered sensors, compact industrial monitoring nodes, building and access controls, portable measurement instruments, low-energy IoT endpoints, and small motor or actuator controllers. The 4 KB Flash and 2 KB RAM favor focused applications with modest code and working-data requirements, while the 17 I/O pins allow several sensors, indicators, and external interfaces to share one controller. Designers should verify every exposed-pin function, programming connection, and decoupling requirement against the manufacturer pin description and reference schematic. Place the exposed pad and ground-plane connection according to the package drawing, provide local supply bypassing, and confirm that the firmware linker configuration matches the 4 KB Flash and 2 KB RAM partition. This product page consolidates the core device specifications, practical design considerations, package information, and documented cross-reference candidates into an engineering-focused selection resource. It also distinguishes the exact ordered device from related family members whose memory, core, package suffix, or ordering configuration differs.

Permintaan RFG Kontak
EFM32TG110F8-D-QFN24 - 32MHz Cortex-M3 Tiny Gecko MCU | Silicon Labs
EFM32TG110F8-D-QFN24

EFM32TG110F8-D-QFN24 - 32MHz Cortex-M3 Tiny Gecko MCU | Silicon Labs

The Silicon Labs EFM32TG110F8-D-QFN24 is an ARM Cortex-M3 32-bit microcontroller running up to 32 MHz with 8 KB of Flash and 2 kB of RAM, housed in a 24-QFN (5 x 5 mm) surface-mount package. It is built on Silicon Labs' energy-friendly EFM32 platform, combining a low-power architecture with fast wake-up from energy-saving modes for battery-operated and energy-harvesting designs. A microcontroller (MCU) is a single integrated circuit that contains a processor core, program memory, data memory and a set of dedicated peripherals such as timers, GPIO, serial interfaces and analog blocks. Within the component hierarchy, the EFM32TG110 sits in the ARM Cortex-M3 class of 32-bit embedded processors and in the EFM32 Tiny Gecko family of Silicon Labs low-power MCUs, a line positioned between the larger EFM32 Gecko and the ultra-low-power EFM32 Zero Gecko families for designs where energy cost per data point matters. Key features of this device include an ARM Cortex-M3 core operating up to 32 MHz, 8 KB of Flash program memory organized as 8K x 8, 2 kB of SRAM, 17 digital I/O pins and two 16-bit timers. Silicon Labs specifies run-mode current of 150 uA/MHz and stop-mode current as low as 0.6 uA, which is the core reason the family is popular in coin-cell and sensor-node products. The device also integrates an AES hardware accelerator, analog peripherals including an operational amplifier, and a 2-pin serial-wire debug interface with a separate 1-wire Serial Wire Viewer pin for profiling and trace output. Technically, the Tiny Gecko platform gives the EFM32TG110 fast wake-up times from its deep-sleep states, retention of output state in shutoff mode, and a peripheral set that can operate autonomously. This lets a design sleep at microamp current, wake, sample a sensor, transmit a short packet and return to sleep without the long wake latency typical of generic low-power MCUs, which directly reduces average current in duty-cycled nodes. Typical applications include wireless sensor nodes and IoT end devices, industrial monitoring and metering, battery-powered handheld instruments, energy-harvesting sensors, smart home accessories and small motor or actuator control sub-systems where a full MCU plus glue logic would be over-specified. When designing with the EFM32TG110F8-D-QFN24, remember that its 2 kB of RAM is the real design constraint: keep stack depth, DMA buffers and protocol buffers lean, and prefer the 8 KB Flash part only for code sizes that genuinely fit. Route the two SWD debug pins to test points so the board can be programmed and profiled in production. This page consolidates device specifications, drop-in alternatives in the same 24-QFN footprint, a parameter-by-parameter comparison, and practical low-power design notes so engineers can qualify the part against a second source and plan a board layout in one pass.

Permintaan RFG Kontak