Produk (21.000+)

LPC2132FBD64 - 60MHz ARM7 MCU, 64KB Flash, LQFP-64 | NXP
LPC2132FBD64

LPC2132FBD64 - 60MHz ARM7 MCU, 64KB Flash, LQFP-64 | NXP

The NXP Semiconductors LPC2132FBD64 is a single-chip 16/32-bit ARM7TDMI-S microcontroller operating at up to 60MHz, with 64KB of embedded flash memory and 16KB of SRAM in a 64-pin LQFP package measuring 10mm by 10mm. It integrates a 10-bit ADC and DAC, providing a compact platform for embedded control, data acquisition and mixed-signal applications. An ARM7TDMI-S microcontroller combines a 32-bit ARM processor core with embedded real-time emulation and trace support. Within the embedded-device hierarchy, the LPC2132FBD64 belongs to the NXP LPC2000 general-purpose MCU family, combining processor core, nonvolatile program memory, static RAM, analog conversion and serial interfaces in one package. This integration reduces external component count while retaining dedicated hardware for embedded control. Key features include an ARM7TDMI-S 16/32-bit core, a maximum clock frequency of 60MHz, 64KB flash, 16KB SRAM, 10-bit ADC and 10-bit DAC functions, and a 64-pin LQFP package. Its 128-bit memory interface and accelerator architecture support efficient 32-bit instruction execution at the maximum operating frequency, according to the NXP LPC2000 family description. The LPC2132FBD64 is suited to designs requiring deterministic embedded control, mixed-signal measurement and multiple communication interfaces. Typical uses include industrial data-acquisition controllers, networked monitoring equipment, building-control modules, instrument-control systems and compact embedded gateways. The integrated converters allow an analog sensor to be digitized and a control or reference signal to be generated without adding separate converter packages. PCB design should preserve short analog traces, provide clean grounding around the ADC and DAC circuitry, and follow the manufacturer pin and layout guidance for the 64-pin LQFP footprint. Firmware should use the LPC2132 memory map and ARM7TDMI-S startup sequence, while application code should account for the device's 64KB flash and 16KB SRAM limits during linker allocation. This page combines the exact NXP and distributor identity, package and memory characteristics with application guidance, a parameter comparison, and actionable replacement criteria. The LPC2132FBD64 is best suited to legacy or ongoing ARM7-based designs that need a 60MHz controller, 64KB embedded flash and integrated 10-bit analog conversion in an established 64-LQFP footprint.

Permintaan RFG Kontak
LPC2132FBD64/01151 - ARM7 64KB Flash MCU | NXP 64-LQFP
LPC2132FBD64/01151

LPC2132FBD64/01151 - ARM7 64KB Flash MCU | NXP 64-LQFP

The NXP LPC2132FBD64/01151 is a 16/32-bit ARM7TDMI-S microcontroller with 64 KB of embedded high-speed flash memory, 16 KB SRAM, and a rich set of peripherals, housed in a 64-pin LQFP (10x10 mm) package. It integrates a 10-bit ADC, 10-bit DAC, two 32-bit timers, a watchdog timer, real-time clock, USB 2.0 full-speed device controller, and multiple serial interfaces (UART, SPI, I2C). Key specifications include a 60 MHz maximum CPU clock from the on-chip PLL, 128-bit wide memory interface with a unique accelerator enabling 32-bit code execution at maximum clock rate, single 3.3 V power supply operation, and on-chip integrated oscillator. The MCU targets embedded control, industrial networking, and USB device applications where deterministic real-time behavior is required. The LPC2132 belongs to the LPC2131/32/34/36/38 family which scales flash memory from 32 KB to 512 KB. Its 64 KB flash and 16 KB SRAM position it as a mid-density member of the family, suitable for applications requiring modest program and data memory plus USB connectivity. The peripheral mix (USB, ADC, DAC, RTC, multiple timers) provides a complete system-on-chip solution for industrial, medical, and consumer products. Typical applications include industrial control and automation, USB peripherals and bridges, point-of-sale terminals, medical instrumentation, smart card readers, and general embedded control. The on-chip USB 2.0 full-speed device controller simplifies USB device designs by eliminating external PHY and reducing BOM cost. When designing with this device, ensure the JTAG and Embedded Trace Macrocell (ETM) debug access is preserved for development and field updates; the ARM7TDMI-S supports both real-time emulation and embedded trace. ISP/IAP flash programming via UART enables in-system firmware updates without removing the part from board-level access. This page synthesizes distributor pricing, drop-in alternative MPNs, and practical design notes for the LPC2132FBD64/01151 that are not found in the manufacturer datasheet, enabling engineers to make faster component selection decisions.

Permintaan RFG Kontak
LPC2134FBD64 - 60MHz ARM7 128KB Flash MCU | NXP
LPC2134FBD64

LPC2134FBD64 - 60MHz ARM7 128KB Flash MCU | NXP

The NXP Semiconductors LPC2134FBD64 is a single-chip 16/32-bit ARM7TDMI-S microcontroller with a 60 MHz maximum clock, 128 kB of embedded flash, 16 kB of SRAM, 10-bit ADC and DAC peripherals, and a 64-LQFP surface-mount package. It combines a 32-bit ARM7TDMI-S core with a 128-bit-wide memory interface and accelerator architecture for high-speed 32-bit code execution. A microcontroller is a programmable integrated circuit that consolidates a processor core, memory, and peripherals into one component. The LPC2134 belongs to the ARM7 MCU family and sits within the broader hierarchy of embedded processor, microcontroller, and semiconductor control devices. Its on-chip flash supports in-system programming and in-application programming, while its serial interfaces, timers, and analog converters provide a practical platform for embedded control without requiring substantial external memory. Key features include a 60 MHz operating clock, 128 kB of embedded high-speed flash, 16 kB of SRAM, and 10-bit ADC and DAC channels. The 64-LQFP package is specified as a 10 mm by 10 mm surface-mount device with a 0.5 mm terminal pitch. The device supports operating temperatures from -40 °C to +85 °C, making it suitable for industrial, automation, and embedded control environments where extended-temperature operation is required. The ARM7TDMI-S architecture provides real-time emulation and embedded trace support for development and debugging. The wide memory interface and accelerator architecture are intended to maintain execution performance at the maximum clock rate, while the integrated analog converters reduce the need for external components in measurement and control systems. Typical applications include industrial automation equipment, motor and motion controllers, data acquisition modules, communications interfaces, and embedded instruments. The 10-bit ADC supports analog sensor monitoring, while the DAC supports setpoint generation, waveform control, and analog output functions. When designing a PCB around the LPC2134FBD64, preserve the 0.5 mm LQFP pitch, provide stable decoupling near the supply pins, and route the crystal and high-speed signals according to the pin-description and layout guidance in the NXP datasheet. This page combines the manufacturer specifications, family alternatives, and application guidance to help engineers evaluate the device for new and legacy embedded designs.

Permintaan RFG Kontak
LPC2141FBD64 - 60MHz ARM7 MCU, 32KB Flash | NXP
LPC2141FBD64

LPC2141FBD64 - 60MHz ARM7 MCU, 32KB Flash | NXP

NXP Semiconductors LPC2141FBD64 is an ARM7TDMI-S 16/32-bit microcontroller operating up to 60 MHz, with 32 KB of on-chip flash and 8 KB of SRAM in a 64-LQFP package. The device combines a 32-bit ARM7TDMI-S processor, USB 2.0 full-speed device support, serial interfaces, timers, and 10-bit analog conversion resources for embedded control systems. An ARM7-based microcontroller is a single-chip processing platform that executes 32-bit instructions while supporting the wider ARM instruction set and embedded peripherals required for control applications. Within the product hierarchy, the LPC2141FBD64 is a microcontroller, or MCU, integrating a CPU core, memory, communication interfaces, timers, and analog peripherals on one integrated circuit. The LPC2141FBD64 provides 32 KB of flash for program storage, 8 KB of SRAM for working memory, and a maximum CPU frequency of 60 MHz. Its USB 2.0 full-speed device interface supports direct USB connectivity, while the family also includes 10-bit ADC and DAC functions. The 64-LQFP package provides 64 terminals for external memory, communications, analog, timing, and control connections. The ARM7TDMI-S architecture uses a 128-bit memory interface and an accelerator architecture intended to support maximum-rate 32-bit code execution. Real-time emulation and embedded trace support assist development and diagnostics. Multiple peripheral functions can share pins through configurable multiplexing, allowing designers to balance USB, serial communications, timers, analog inputs, and external memory interfaces against board-space constraints. Typical implementations include USB-connected data acquisition equipment, industrial control modules, USB-to-serial or USB-to-protocol adapters, embedded test instruments, and legacy peripheral controllers. The device is especially relevant to systems that retain an ARM7 software base and require a compact LQFP footprint while adding a full-speed USB device interface. Hardware design should begin with the manufacturer pin connection table and power requirements for the selected clock and peripheral configuration. Place decoupling capacitors close to the supply terminals, route USB data pairs as a controlled-impedance differential pair, and keep analog and high-current switching paths separated from sensitive signal pins. Firmware must configure pin multiplexing, clocks, and peripheral ownership before enabling the corresponding external functions. This product record combines the manufacturer family specification with package, interface, memory, and sourcing details. It also provides drop-in family comparisons and application-oriented guidance covering USB connectivity, embedded control, data acquisition, and industrial equipment, helping engineers evaluate the LPC2141FBD64 without relying on a basic catalog summary alone.

Permintaan RFG Kontak
LPC2142FBD64 - 60MHz ARM7 64KB Flash MCU | NXP
LPC2142FBD64

LPC2142FBD64 - 60MHz ARM7 64KB Flash MCU | NXP

NXP LPC2142FBD64 is a single-chip 16-bit/32-bit ARM7TDMI-S microcontroller operating up to 60 MHz, with 64 KB of embedded flash and 16 KB of SRAM in a 64-LQFP package measuring 10 x 10 mm. The device integrates USB 2.0 full-speed device connectivity, a 10-bit ADC, a 10-bit DAC, In-System Programming, and In-Application Programming. An ARM7TDMI-S microcontroller is a 32-bit embedded processor that combines an ARM processing core, memory, and peripherals in a single integrated circuit. The LPC2100 family hierarchy places the LPC2142 in the embedded microcontroller segment, where a high-performance CPU, deterministic peripherals, and flexible in-circuit programming support industrial control, communications, and data-acquisition equipment. The principal characteristics are a 60 MHz ARM7TDMI-S core, 64 KB of program flash, and 16 KB of SRAM. A 128-bit memory interface and accelerator architecture support 32-bit code execution at the maximum clock rate. Real-time emulation and embedded trace support improve debugging visibility, while ISP and IAP simplify firmware programming and field updates. Integrated USB 2.0 full-speed device support makes the LPC2142FBD64 suitable for USB-connected control, data acquisition, and peripheral products. The on-chip 10-bit ADC and DAC support analog measurement and signal generation without requiring separate converters. Together, these resources allow a compact design to combine acquisition, processing, communications, and control in a single microcontroller package. Typical uses include industrial data loggers, USB interface controllers, instrumentation, embedded test equipment, communications modules, and control systems. The 60 MHz processing rate and 64 KB flash capacity are well matched to protocol handling, supervisory logic, and mixed analog-digital control. Designs requiring more program storage should be assessed against the larger-memory members of the LPC214x family. PCB implementation should preserve short analog and digital return paths, route high-current supply connections with adequate copper, and place decoupling capacitors close to the power pins. USB differential routing requires controlled impedance and minimized stub length. Firmware configuration, peripheral clocks, and unused pins should be initialized according to the manufacturer datasheet before production release. This page combines the manufacturer family data with practical package, programming, interface, and replacement guidance. It distinguishes the exact LPC2142FBD64 configuration from related ordering codes and explains when a higher-memory family member may be appropriate for a redesigned board.

Permintaan RFG Kontak
LPC2144FBD64 - 60MHz ARM7 MCU, 128KB Flash | NXP
LPC2144FBD64

LPC2144FBD64 - 60MHz ARM7 MCU, 128KB Flash | NXP

The NXP LPC2144FBD64 is a 16-bit/32-bit ARM7TDMI-S microcontroller operating at up to 60 MHz, with 128 KB of embedded flash memory, 16 KB of SRAM, USB 2.0 full-speed device support, and 10-bit ADC and DAC peripherals in a 64-LQFP 10 x 10 mm package. It combines deterministic 32-bit execution with integrated connectivity and mixed-signal peripherals for compact embedded-control designs. An ARM7 microcontroller is a member of the embedded-processor hierarchy that combines a CPU core, memory, peripherals, and I/O within one integrated circuit. The LPC2144FBD64 belongs to the NXP LPC2100 family and uses the ARM7TDMI-S core with a 128-bit memory interface and accelerator architecture for 32-bit code execution at the maximum clock rate. Its principal features include a 60 MHz clock, 128 KB of high-speed embedded flash, 16 KB of SRAM, full-speed USB device operation, and 10-bit ADC and DAC channels. The integrated USB controller reduces external interface complexity, while the converter peripherals support industrial measurement, control, and low-resolution analog signal generation without requiring separate analog devices. The architecture is suited to embedded systems that require higher processing capacity than an 8-bit controller while retaining a conventional integrated peripheral set. Embedded trace and real-time emulation support assist development and diagnostics, while the unified memory architecture allows code, data, and firmware-upgrade operations to be managed within one programmable device. Typical uses include USB-connected data-acquisition equipment, industrial controllers, serial-interface products, embedded gateways, and compact control panels. The 60 MHz ARM7TDMI-S performance is appropriate for protocol handling, supervisory control, and multi-interface coordination, while the 10-bit ADC and DAC can reduce board area in cost-sensitive mixed-signal products. PCB implementation requires careful attention to the 64-LQFP pin geometry, power and ground distribution, clock stability, and analog signal routing. The USB interface and converter inputs are sensitive to return-path noise and inappropriate trace lengths, so separating analog and digital return currents helps preserve signal quality. This page consolidates the manufacturer specifications, package information, verified commercial availability, and design-oriented guidance for engineers evaluating the LPC2144FBD64. It also highlights the limits of a direct replacement search: an assembly with the same device family and package still requires firmware, memory-map, peripheral, and software-tool compatibility checks.

Permintaan RFG Kontak
LPC2146FBD64 - 60MHz ARM7 Microcontroller with USB 2.0 | NXP
LPC2146FBD64

LPC2146FBD64 - 60MHz ARM7 Microcontroller with USB 2.0 | NXP

The NXP Semiconductors LPC2146FBD64 is a single-chip 16-bit/32-bit ARM7TDMI-S microcontroller operating up to 60MHz, with 256KB flash, ISP/IAP support, USB 2.0 full-speed device connectivity, and 10-bit ADC and DAC functions in a 64-LQFP package. It combines a high-performance ARM7 core with embedded high-speed flash and communications peripherals for embedded control, data acquisition, and USB-connected equipment. An ARM7 microcontroller is a 32-bit RISC processor platform designed for embedded systems, where deterministic control, peripheral integration, and low-power operation are more important than desktop-class computing. The LPC2146 belongs to the LPC2000 general-purpose MCU family, using the ARM7TDMI-S architecture with real-time emulation and embedded trace support. This hierarchy places it within microcontrollers, embedded processors, and semiconductor-based control systems. Key features visible in the verified product data include a 60MHz operating frequency, 256KB of flash memory, USB 2.0 full-speed device operation, and integrated 10-bit ADC and DAC peripherals. ISP/IAP capability supports programming and application updates, while the 128-bit memory interface and accelerator architecture described by NXP are intended to improve execution efficiency for 32-bit code. These characteristics suit systems requiring local control, mixed-signal measurement, and USB data exchange. Typical applications include USB data acquisition controllers, industrial monitoring equipment, communications interfaces, embedded test systems, and compact control platforms. The integrated converters reduce the need for separate analog support where their channel counts, reference, and electrical limits meet the system requirements. The ARM7TDMI-S core also supports established embedded development workflows and debugging ecosystems. When designing around the LPC2146FBD64, verify the complete electrical and pin-level requirements against the manufacturer datasheet, especially USB routing, analog input conditioning, clock configuration, decoupling, and programming interfaces. The 64-LQFP footprint requires careful land-pattern compliance and adequate clearance around adjacent signal pins. This product page combines verified NXP specifications, distributor availability signals, package information, and engineering-oriented selection guidance. It distinguishes documented facts from parameters requiring confirmation, helping engineers evaluate the LPC2146FBD64 for USB-enabled embedded control and analog acquisition designs.

Permintaan RFG Kontak
LPC2148FBD64 - 60MHz ARM7 MCU with USB | NXP
LPC2148FBD64

LPC2148FBD64 - 60MHz ARM7 MCU with USB | NXP

The NXP Semiconductors LPC2148FBD64 is a 16-bit/32-bit ARM7TDMI-S microcontroller with a 60 MHz maximum clock, 512 kB of embedded flash, USB 2.0 full-speed device support, and 10-bit ADC and DAC peripherals in a 64-LQFP package measuring 10 mm by 10 mm. The part combines an ARM processor core, high-speed embedded memory, and mixed-signal connectivity in one device. An ARM7TDMI-S microcontroller is a single-chip embedded processing device designed to execute 16-bit or 32-bit instructions while integrating memory and peripherals. Within the product hierarchy, the LPC2148 belongs to the LPC2100 family of ARM7-based microcontrollers, combining real-time emulation, embedded trace support, and a 128-bit memory interface. It is intended for industrial control, communications, data acquisition, and USB-connected embedded systems. Key features include 512 kB of embedded flash, up to 40 kB of SRAM, a 60 MHz operating frequency, USB 2.0 full-speed device operation, and 10-bit ADC and DAC channels. The integrated converter resources reduce the need for external signal-conditioning and data-conversion components when the system must acquire analog inputs and generate analog outputs. The 64-LQFP package also provides enough perimeter pins for external memories, communications interfaces, and general-purpose I/O. The ARM7TDMI-S architecture supports efficient 32-bit execution while maintaining compatibility with 16-bit ARM code. Its 128-bit-wide memory interface is designed to support code execution at the maximum clock rate, and the embedded flash permits firmware, boot code, and application logic to reside directly on the microcontroller. For new hardware, software should be developed against the current NXP LPC2148 device support and peripheral libraries rather than assuming compatibility with unrelated ARM7 microcontrollers. Typical applications include industrial control panels, USB data loggers, instrumentation front ends, serial gateways, and embedded measurement systems. The USB interface is particularly useful for a compact peripheral that must exchange configuration or logged data with a host computer, while the ADC and DAC support direct analog monitoring and low-speed signal generation. Firmware and external circuitry still need appropriate protection for industrial noise and ground-potential differences. PCB layout should preserve short, continuous return paths for USB, analog grounds, and power connections. Place decoupling capacitors close to the supply pins, keep analog and digital return currents separated where possible, and follow the package and application guidance in the manufacturer datasheet. The LCD, Ethernet, and USB interfaces also require careful signal-integrity treatment if those optional functions are used. This product page combines the manufacturer specifications, package information, sourcing context, interface considerations, and honest replacement guidance for LPC2148FBD64. It also distinguishes verified pin-compatible options from related devices that require different firmware, package changes, or board redesign.

Permintaan RFG Kontak
LPC2210FBD144/01 - ARM7TDMI-S 75MHz ROMless MCU 144-LQFP | NXP
LPC2210FBD144/01

LPC2210FBD144/01 - ARM7TDMI-S 75MHz ROMless MCU 144-LQFP | NXP

The NXP LPC2210FBD144/01 is a 16/32-bit ARM7TDMI-S microcontroller operating up to 75 MHz, supplied in a 144-pin LQFP package (20x20 mm) with no on-chip flash (ROMless) and an external memory interface. The /01 suffix differentiates the LPC2210 silicon revision from earlier revisions, applying to devices that include the 10-bit ADC and full external memory bus. The integrated ARM7TDMI-S core with real-time emulation and embedded trace support delivers up to 75 MIPS of processing, while the 16-bit Thumb mode reduces code size by more than 30% with minimal performance penalty for memory-constrained designs. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, memory, peripherals, and I/O on one die. The LPC2210 belongs to the ARM7 family of microcontrollers, which falls under the broader hierarchy of microcontrollers -> embedded processors -> integrated circuits -> semiconductors. ROMless variants like the LPC2210 are designed for systems that require large external memories (SRAM, SDRAM, NOR flash) and deterministic boot behavior, common in industrial control, point-of-sale, and medical systems where code size exceeds what on-chip flash can offer. Key features include an 8-channel 10-bit ADC with conversion time as low as 2.44 us, four 32-bit timers with capture/compare, six PWM outputs, a Real-Time Clock (RTC) with separate power domain, two UARTs, two I2C buses, an SPI interface, and a USB 2.0 Full-Speed Device port. The device provides up to 76 GPIOs depending on bus configuration, nine external interrupt pins, and a 16-bit external memory controller supporting SRAM, ROM, NOR flash, and SDRAM. Operating voltage is 1.8V core / 3.3V I/O, with industrial temperature grade (-40C to +85C). Architecturally, the LPC2210 uses a von Neumann single-bus design with the ARM7TDMI-S core, a low-latency Vectored Interrupt Controller (VIC) supporting up to 32 vectored IRQ slots, and the AMBA AHB peripheral bus. The 10-bit successive-approximation ADC is augmented with on-chip op-amp buffering capability on some channels. The integrated PLL allows the device to run from a low-frequency crystal while generating the high-speed internal clock. Typical applications include industrial control and PLCs, medical instrumentation, point-of-sale terminals, access control, gateway and protocol converter designs, and embedded control where large external flash is required for firmware storage. The wide GPIO count and rich peripheral set also make it suitable for printer controllers and HVAC interfaces. When designing with the LPC2210FBD144/01, an external boot memory is mandatory because the device is ROMless - the vector fetch on reset is performed from external CS0. Ensure the external memory interface is correctly wired and that bus-cycle timing matches the chosen SRAM/SDRAM speed grade. Power-rail decoupling (100 nF + 10 uF near each supply pin) is required for clean ADC operation. This page synthesizes NXP datasheet parameters, distributor pricing, drop-in /01-suffix alternatives, and practical PCB design notes not consolidated in a single place elsewhere on the web.

Permintaan RFG Kontak
LPC2292FET144/01 - 60MHz ARM7 MCU, 256KB Flash | NXP
LPC2292FET144/01

LPC2292FET144/01 - 60MHz ARM7 MCU, 256KB Flash | NXP

The NXP LPC2292FET144/01 is a 16/32-bit ARM7TDMI-S microcontroller with a 60 MHz maximum clock frequency, 256 KB of embedded flash memory, 16 KB of RAM, and a 144-TFBGA package measuring 12 mm by 12 mm. It also provides two CAN controllers, a 10-bit ADC, and an external memory interface, making it suitable for embedded networking, industrial control, and communications equipment. A microcontroller is a programmable semiconductor that integrates a processor core, memory, and peripherals into one device. The LPC2292 belongs to the ARM7 embedded-control hierarchy: ARM7TDMI-S CPU core, 32-bit microcontroller, embedded system controller, and general-purpose semiconductor. Its bus-oriented architecture and extensive peripheral set allow one device to supervise communications, analog measurement, and external storage or memory-intensive operations. The LPC2292FET144/01 combines a 128-bit-wide memory interface with a unique accelerator architecture that enables 32-bit code execution at the maximum clock rate. Its 256 KB ISP/IAP flash supports in-system and in-application programming, while real-time emulation and embedded trace features assist firmware development and diagnostics. Two CAN controllers are useful for industrial networking, vehicle electronics, and embedded systems requiring reliable multi-controller communication. The 10-bit ADC provides analog measurement capability without requiring a separate converter, and the external memory interface expands the design options available when an application needs additional memory or peripheral devices. These interfaces complement the 60 MHz processor and make the LPC2292 suitable for control systems that combine communications, data acquisition, and external signal processing in one compact package. Typical uses include industrial controllers, CAN-connected equipment, building automation, embedded gateways, and data-acquisition systems. The 144-TFBGA package supports compact designs but requires careful PCB layout and inspection because its fine-pitch ball grid has limited soldering visibility. Firmware development can use the processor's real-time emulation and embedded trace capabilities to reduce the complexity of board bring-up and runtime analysis. Careful power, decoupling, clock, and memory-interface design is essential for reliable operation. Place the required supply capacitors close to their associated pins, route high-current and sensitive signals appropriately, and follow the NXP datasheet's recommended PCB and pin-configuration guidance. The /00 and /01 device variants use an identical pin configuration, which simplifies board-level planning across those revisions. This product page consolidates the principal NXP device characteristics, practical integration guidance, exact-source availability information, and a focused comparison with compatible LPC2200-family devices. It also highlights where revision-specific ordering codes and detailed package pin descriptions must be checked in the manufacturer datasheet before a new PCB is released for production.

Permintaan RFG Kontak
LPC2364FBD100K - 72MHz ARM7 MCU, 128KB Flash, Ethernet/USB/CAN | NXP
LPC2364FBD100K

LPC2364FBD100K - 72MHz ARM7 MCU, 128KB Flash, Ethernet/USB/CAN | NXP

The NXP LPC2364FBD100K is an ARM7 LPC2300-series 16-bit/32-bit microcontroller operating at 72 MHz with 128 KB of on-chip flash memory and 34 KB of SRAM, housed in a 100-pin LQFP (14 x 14 mm) gull-wing package rated for industrial temperature. It integrates an Ethernet MAC, a USB 2.0 device/host/OTG controller, two CAN channels, four UARTs and an 8-channel 10-bit ADC, making it a single-chip solution for networked embedded control equipment. A microcontroller (MCU) is a complete single-chip computer containing a CPU core, program memory, data memory and a set of on-chip peripherals. The LPC2364FBD100K is built around the ARM7TDMI-S core, an older 32-bit RISC architecture that executes 32-bit code through a 128-bit-wide memory interface and an accelerator structure, reaching the maximum clock rate while keeping interrupt latency predictable. In the taxonomy, an MCU is a microcontroller, a type of embedded processor, falling under semiconductors and integrated circuits. Key features of this part include 128 KB of flash for In-System Programming and In-Application Programming, 34 KB of SRAM, a 10 Mbit/100 Mbit-capable Ethernet MAC with dedicated DMA channels, USB 2.0 device, host and OTG operation, two CAN 2.0B controllers, three SSP/SPI channels, three I2C channels, an I2S interface, a 10-bit DAC, two PWM channels, four general-purpose timers and a general-purpose DMA controller. A 10-bit ADC with eight channels supports analog sensor front ends. The LPC2300 architecture separates the ARM7TDMI-S core from the peripherals, and the accelerator lets the core execute 32-bit code at full speed while the 128-bit memory bus sustains simultaneous instruction fetches and DMA transfers. The part accepts an external crystal or oscillator up to 72 MHz and supports PLL-based clock generation, with typical power consumption in the tens of milliwatts at active operation and far lower figures in sleep or power-down modes. Typical applications include industrial Ethernet data loggers and gateways, USB-to-CAN industrial bridges, networked PLC and HMI controller boards, motor and stepper control peripherals, building and access-control panels, and USB-connected test and measurement instruments. Any design needing simultaneous Ethernet, USB and CAN traffic on one chip benefits from integrating three protocol engines instead of adding discrete controllers. When laying out the board, keep the 25 MHz or 12 MHz crystal and its load capacitors within a few millimeters of pins OSC1 and OSC2, route the Ethernet magnetic-link and line transformer signals as a controlled-impedance differential pair, and place the Ethernet PHY and its 1.2 V core regulator close to the MCU. The LQFP-100 footprint has a fine 0.5 mm pitch, so confirm solder mask and paste stencil parameters before volume production. This page combines manufacturer specification data, distributor pricing structure, same-footprint drop-in alternatives from the LPC2300 family and cross-brand ARM Cortex-M equivalents, plus practical layout and design notes that go beyond the basic manufacturer datasheet listing.

Permintaan RFG Kontak
LPC2364FET100 - ARM7 MCU 128kB Flash 72MHz | NXP TFBGA-100
LPC2364FET100

LPC2364FET100 - ARM7 MCU 128kB Flash 72MHz | NXP TFBGA-100

The NXP LPC2364FET100 is a 16/32-bit ARM7TDMI-S microcontroller operating at 72 MHz with 128 kB of embedded flash and 34 kB of SRAM, housed in a 100-ball TFBGA (9x9 mm) package. It integrates an Ethernet MAC, USB 2.0 full-speed Device/Host/OTG, two CAN channels, three SSP/SPI ports, three I2C buses, an I2S interface, an 8-channel 10-bit ADC and a single 10-bit DAC, plus a 4-channel general-purpose timer block and 70 user I/O pins. An ARM7 microcontroller (Advanced RISC Machine, 32-bit) is a low-power general-purpose MCU core widely deployed in embedded networking and industrial control. Within the NXP LPC2000 family hierarchy, it sits between simpler Cortex-M0/M3 devices and higher-end Cortex-M3/M4 parts, balancing deterministic real-time performance with rich on-chip peripherals. The ARM7TDMI-S core combines a 32-bit data path with a 16-bit Thumb instruction set, giving a useful trade-off between code density and computational throughput for legacy and cost-sensitive designs. Key features include 128 kB on-chip flash with ISP/IAP support, 34 kB SRAM, a 128-bit-wide memory interface and a unique accelerator architecture that lets 32-bit code execute at the maximum clock rate. The device supports single 3.3 V supply operation, four UARTs (one with full modem control), two CAN 2.0B channels, and an external memory controller for SRAM/Flash/ROM expansion. The integrated 10-bit ADC with eight input channels and 10-bit DAC remove the need for external data converters in many closed-loop control loops. Typical applications include industrial Ethernet gateways, CAN-based fieldbus nodes, building automation controllers, USB peripherals, and embedded Point-of-Sale terminals that benefit from the simultaneous availability of Ethernet + USB + CAN. The 70 I/O pins and external memory bus also suit legacy 8/16-bit peripheral expansion. The 72 MHz ARM7 core is more than adequate for protocol stacks (TCP/IP, CANopen, Modbus) where deterministic latency matters more than raw compute. Key design consideration: the LPC2364FET100 is a member of the legacy ARM7 family and is not pin-compatible with newer Cortex-M3 LPC1768/LPC1769 parts; firmware must be rebuilt for migration. Decoupling must follow the NXP reference design (100 nF + 10 µF bulk near each VDD/VSS pair) to keep the 128-bit wide memory interface clean at 72 MHz. This page synthesizes distributor pricing, drop-in alternatives within the LPC2364 family, and design notes not found in the manufacturer datasheet alone.

Permintaan RFG Kontak
LPC2366FBD100K - 72MHz ARM7 MCU with Ethernet | NXP
LPC2366FBD100K

LPC2366FBD100K - 72MHz ARM7 MCU with Ethernet | NXP

NXP Semiconductors LPC2366FBD100K is an ARM7 16/32-bit embedded microcontroller operating at 72 MHz, with 256 KB of flash memory and up to 58 KB of SRAM in a 100-pin LQFP package. It integrates an Ethernet MAC, USB Device, Host and OTG support, a DMA controller, four UARTs, two CAN channels, three SSP/SPI interfaces, three I2C interfaces, and I2S. The device also includes an 8-channel 10-bit ADC, a 10-bit DAC, two PWM channels, and four general-purpose timers. An ARM7 microcontroller is a single-chip embedded processing component that combines a CPU core, program memory, data memory, and peripherals on one integrated circuit. The ARM7 family is part of the broader microcontroller hierarchy, where a microcontroller integrates a processor, memory, and dedicated I/O functions into a compact semiconductor intended for control-oriented products. The LPC2366FBD100K is designed for embedded systems requiring extensive communications and mixed-signal connectivity. Its 256 KB flash provides embedded program storage, while up to 58 KB of SRAM supports working data, buffers, protocol stacks, and Ethernet or USB traffic. Integrated Ethernet MAC, USB, and CAN connectivity can reduce the number of discrete interface devices required in a controller. The ARM7TDMI-S architecture combines a 16/32-bit instruction set with real-time emulation support. At 72 MHz, the processor provides substantially greater computational headroom than many earlier 8-bit or 16-bit controllers while retaining the deterministic behavior required by embedded applications. Hardware peripherals including DMA, UART, CAN, SSP/SPI, I2C, timers, PWM, ADC, and DAC distribute common workloads from the CPU. Typical uses include industrial Ethernet controllers, USB-to-serial gateways, CAN-based industrial nodes, data acquisition equipment, embedded networking appliances, and compact control systems. The combination of Ethernet, USB, CAN, serial interfaces, and analog conversion is particularly useful when a product needs multiple communication methods without relying on several companion microcontrollers. Board design should preserve the package pin assignments and provide the power, clock, reset, and decoupling requirements specified in the NXP manufacturer datasheet. Ethernet magnetics, USB protection, and high-speed signal routing require careful layout control. Firmware must also reserve the correct peripheral instances, pin multiplexing, interrupt priorities, and memory regions before enabling high-speed communication paths. This product page consolidates the manufacturer specifications, available ordering information, interface details, and engineering guidance for LPC2366FBD100K. It supports faster component identification and provides practical context for selecting the MCU, planning firmware resources, checking PCB requirements, and comparing same-footprint alternatives.

Permintaan RFG Kontak
LPC2368FBD100 - ARM7 72MHz 512KB Flash MCU | NXP
LPC2368FBD100

LPC2368FBD100 - ARM7 72MHz 512KB Flash MCU | NXP

The NXP LPC2368FBD100 is an ARM7TDMI-S based 16/32-bit microcontroller for embedded applications featuring high integration and low power consumption at up to 72 MHz operation. According to the NXP product page, it integrates up to 512 kB of embedded high-speed flash memory, up to 58 kB of SRAM, an Ethernet MAC, USB 2.0 Device/Host/OTG, a 10-bit 8-channel ADC, a 10-bit DAC, two CAN channels, four UARTs, three SSP/SPI ports, three I2C buses, an I2S interface, two PWM timers, four general-purpose timers, and a DMA controller. An ARM7 microcontroller is a 32-bit RISC processor core that executes both the 32-bit ARM and the 16-bit Thumb instruction set, allowing code-density and performance trade-offs. The ARM7TDMI-S variant adds a hardware multiplier and embedded ICE debug logic. Within NXP's portfolio, the LPC2300 family sits at the top of the legacy LPC2000 ARM7 line, ahead of the smaller LPC2100 and LPC2200 series, and is itself succeeded by the Cortex-M3 based LPC1700 family. Peripherals are tightly integrated to minimize external components in industrial Ethernet, USB, and CAN nodes. The device operates from a single 3.0 V to 3.6 V supply, with I/O tolerant to 5 V, and is housed in a 100-pin LQFP (14 x 14 mm) package suitable for cost-sensitive 4-layer PCB layouts. Key features include 72 MHz maximum CPU clock with on-chip PLL, 32 kB SRAM usable as battery-backed retention, vectored interrupt controller for deterministic real-time response, and ISP/IAP in-application programming via UART or CAN. The Ethernet MAC supports 10/100 Mbps MII/RMII with full-duplex operation, while the USB 2.0 controller supports device, host, and OTG roles. The ADC delivers 400 ksps across 8 channels at 10-bit resolution, and the DAC is a 10-bit rail-to-rail converter suitable for waveform generation. Typical applications include industrial Ethernet gateways, building automation controllers, USB peripherals and embedded hosts, CAN-based automotive body modules, point-of-sale terminals, and small-scale motor-control boards. Designers choose the LPC2368FBD100 when ARM7 firmware, a wide peripheral mix, and 512 kB of on-chip flash are required without an external memory bus. When designing with this device, ensure the 3.3 V analog supply (V3A) is decoupled with at least 100 nF plus a 10 uF bulk, and isolate it from the digital 3.3 V plane to avoid ADC/DAC noise coupling. The VBAT domain supports RTC backup and 32 kB of retained SRAM; route a small lithium cell or supercap there to preserve RTC time across power cycles.

Permintaan RFG Kontak
LPC2368FBD100K - 72MHz ARM7 MCU with Ethernet | NXP
LPC2368FBD100K

LPC2368FBD100K - 72MHz ARM7 MCU with Ethernet | NXP

NXP Semiconductors LPC2368FBD100K is a 16/32-bit ARM7TDMI-S microcontroller operating at 72 MHz, with 512 KB of embedded flash, 58 KB of SRAM, and a 100-lead LQFP package measuring 14 x 14 mm. The device integrates an Ethernet MAC, USB Device, Host and OTG controller, two CAN channels, SD/MMC support, four UARTs, three SSP/SPI interfaces, three I2C interfaces, I2S, eight 10-bit ADC channels, a 10-bit DAC, and two PWM blocks. These resources allow one microcontroller to control communications, data acquisition, storage, and real-time peripheral functions without requiring several discrete interface controllers. An ARM7 microcontroller is a 32-bit embedded processor that combines a CPU core, memory, interrupt handling, and programmable peripherals in one integrated circuit. The LPC2300 family belongs to the broader embedded-microcontroller and semiconductor hierarchy. In system terms, the LPC2368FBD100K can serve as the central real-time controller between sensors, communications equipment, human-interface circuits, and external storage. Its integration reduces component count while preserving dedicated hardware for Ethernet, USB, CAN, serial data, and analog measurement. The primary architectural advantage is the 72 MHz ARM7TDMI-S core paired with the LPC2300 accelerator and memory organization. The device provides 512 KB of flash for firmware and 58 KB of SRAM for working data, while a 128-bit-wide memory interface supports the CPU's maximum clock rate. An Ethernet MAC supports network-connected equipment, while USB Device, Host, and OTG operation broadens its role in host and peripheral designs. Two CAN channels suit industrial communication, and the DMA controller moves data with less CPU intervention. The integrated serial resources support several embedded architectures. Four UARTs can connect external sensors, service consoles, or industrial equipment; three SSP/SPI interfaces support fast serial peripherals; three I2C buses suit low-speed controllers and sensors; and I2S provides a dedicated path for digital audio data. The eight-channel 10-bit ADC handles analog inputs, the 10-bit DAC generates analog output, and two PWM blocks support timing, dimming, or motor-control functions. A 10-bit ADC is appropriate for supervisory measurement rather than precision instrumentation with substantially higher resolution requirements. Typical applications include industrial Ethernet gateways, USB-to-serial equipment, CAN-connected control systems, SD/MMC data loggers, audio-capable embedded controllers, and multi-interface test equipment. The Ethernet MAC, USB controller, and CAN channels allow the MCU to bridge communication technologies. The ADC and DAC support supervisory control loops, while SD/MMC connectivity supports removable or nonvolatile data storage. Firmware can also use the ISP and IAP capabilities associated with the LPC2364/65/66/67/68 family for in-system programming and application update workflows. A successful design must account for the 100-pin footprint, all peripheral pin multiplexing, power-supply sequencing, clock configuration, and the demands placed by simultaneous Ethernet, USB, CAN, and memory activity. The LQFP package provides accessible leads for assembly and inspection, but the high pin count requires careful fanout and signal-integrity planning. Firmware should configure each peripheral only after resolving its alternate-function pins and should verify the resulting pin muxing against the manufacturer pin-description table. This page consolidates the exact LPC2368FBD100K identity, verified memory and interface specifications, lifecycle information, sourcing guidance, same-family alternatives, and practical integration considerations. It is intended to help engineers determine whether the original LPC2300 device remains appropriate for an existing 100-LQFP design and how to evaluate a replacement without overlooking changes in memory, peripherals, pin multiplexing, or firmware requirements.

Permintaan RFG Kontak
LPC2368FET100 - ARM7 72MHz MCU, 512KB Flash, Ethernet, USB | NXP
LPC2368FET100

LPC2368FET100 - ARM7 72MHz MCU, 512KB Flash, Ethernet, USB | NXP

The NXP LPC2368FET100 is a 16/32-bit ARM7TDMI-S microcontroller running at up to 72 MHz, integrating 512 kB of on-chip flash, 58 kB SRAM, 100-pin TFBGA (9x9) package, Ethernet MAC, USB 2.0 Device/Host/OTG, two CAN channels, four UARTs, three SSP/SPI ports, three I2C buses, I2S, an SD/MMC interface, an 8-channel 10-bit ADC, a 10-bit DAC, two PWM blocks, four general-purpose timers, an RTC, and a 10-bit ADC. According to the NXP LPC2368FET100 product page, the device is positioned for embedded applications requiring high peripheral integration and low active-power consumption with the rich connectivity needed for industrial gateways and networked appliances. An ARM7 microcontroller is a member of the 16/32-bit RISC microcontroller family based on the ARM7TDMI-S core, sitting within the broader taxonomy of microcontrollers -> microprocessors -> embedded processors -> semiconductors. Compared with 8-bit 8051 or AVR devices, ARM7 cores offer substantially higher code density (Thumb mode), better interrupt handling, and rich on-chip peripherals for Ethernet and USB connectivity. Compared with later Cortex-M3 cores, ARM7TDMI-S lacks the deterministic interrupt latency and unified memory map of the Cortex-M series, but its mature toolchain (Keil, IAR, GCC) and large code base make it useful for legacy designs and field-deployed products. Key features of the LPC2368FET100 include 72 MHz core clock, 512 kB flash for application code, 58 kB SRAM for data buffering, 100-pin TFBGA package (9x9 mm), Ethernet MAC for 10/100 Mbps networking, USB 2.0 full-speed Device/Host/OTG for USB connectivity, two CAN 2.0B channels for industrial networking, 8-channel 10-bit ADC, and 10-bit DAC for analog signal generation. Integrated peripherals reduce external component count and BOM cost while simplifying PCB layout. The LPC2368FET100 is well suited for industrial gateways, building automation controllers, point-of-sale terminals, networked sensors, and USB peripherals. According to the NXP product page, the high peripheral count (Ethernet, USB, CAN, SD/MMC, multiple UARTs) eliminates the need for many external ICs, reducing both cost and board area. The 72 MHz ARM7 core delivers sufficient throughput for TCP/IP stacks and industrial communication protocols. When designing with this device, ensure decoupling on all power pins and follow NXP AN10414 layout guidelines for TFBGA-100 routing. The integrated PHY is not included - an external Ethernet PHY such as the DP83848 is required for Ethernet applications. The USB DP/DM traces must be 90 ohm differential, length-matched, and routed without stubs.

Permintaan RFG Kontak
LPC2378FBD144K - 72MHz ARM7 MCU 512KB Flash | NXP
LPC2378FBD144K

LPC2378FBD144K - 72MHz ARM7 MCU 512KB Flash | NXP

The NXP LPC2378FBD144K is a 16-bit/32-bit ARM7TDMI-S RISC microcontroller operating at 72 MHz, with 512 KB of embedded flash, 58 KB of SRAM, and comprehensive connectivity peripherals in a 144-LQFP package. It is designed for connected embedded systems requiring Ethernet, USB 2.0 device connectivity, CAN communication, and mixed-signal measurement without relying on separate interface devices. A microcontroller is a programmable semiconductor that integrates a CPU core, memory, and peripherals into one package. The LPC2378FBD144K belongs to NXP's LPC2300 general-purpose MCU family and uses the ARM7 architecture, providing a broad software ecosystem and established real-time embedded design methods. Its 512 KB flash supports firmware and application programming, while 58 KB of SRAM accommodates network buffers, protocol stacks, and working data. Key connectivity features include an Ethernet MAC, USB device controller, two CAN channels, four UARTs, three I2C interfaces, two SSP interfaces, one SPI interface, and I2S support. The device also provides an eight-channel 10-bit ADC and a 10-bit DAC for data acquisition and controlled analog output. A DMA controller supports efficient peripheral transfers, while four general-purpose timers, PWM, and a low-power real-time clock support industrial timing and control functions. The LPC2378FBD144K is suitable for industrial networking, building automation, data acquisition, embedded control, communications equipment, and USB-connected embedded products. Its 72 MHz ARM7 core provides a capable balance of processing performance, integrated connectivity, and power efficiency for applications that need more than a basic microcontroller but do not require a higher-complexity application processor. The principal engineering consideration is firmware and peripheral configuration. Ethernet, USB, CAN, analog, and real-time functions require careful initialization, interrupt handling, and PCB signal-integrity layout. The 144-LQFP footprint is also larger than compact MCU packages, so designers should confirm board space and available tooling before committing the component to a new design. This product page combines manufacturer feature information with distributor listings and application-focused guidance. Pricing, stock, lifecycle status, and alternative sourcing can change, so verify current distributor data before committing to a production BOM.

Permintaan RFG Kontak
LPC2387FBD100K - 72MHz ARM7 MCU, 512KB Flash | NXP
LPC2387FBD100K

LPC2387FBD100K - 72MHz ARM7 MCU, 512KB Flash | NXP

NXP Semiconductors LPC2387FBD100K is an Arm7TDMI-S microcontroller operating at up to 72 MHz, with 512 KB of embedded flash, 98 KB of SRAM, and an Ethernet MAC in a 100-pin LQFP tray package. Its operating supply range is 3 V to 3.6 V, and its integrated peripherals include USB 2.0 Device, Host, and OTG, two CAN channels, four UARTs, three SSP/SPI interfaces, three I2C interfaces, an 8-channel 10-bit ADC, and a 10-bit DAC. An Arm7 microcontroller is a 32-bit RISC embedded processor designed around the ARM7TDMI-S architecture, which combines an efficient instruction set with an integrated memory interface and accelerator functions. Within the broader semiconductor hierarchy, the LPC2387 belongs to the microcontroller class, sits above the Arm7 CPU core, and operates as the central control component in an embedded system. Its combination of memory and communications peripherals makes it suitable for connected industrial, medical, and communications equipment. The LPC2387's 128-bit memory interface and accelerator architecture support 32-bit code execution at the maximum CPU frequency. Its 512 KB flash provides on-chip program storage, while 98 KB of SRAM supports working memory for protocol handling, buffers, and real-time control tasks. A 10-bit ADC and 10-bit DAC also allow the device to interface directly with analog sensors and output signals without requiring external converters in suitable designs. Connectivity is a major strength. The Ethernet MAC, USB 2.0 interfaces, CAN channels, UARTs, SPI/SSP buses, and I2C buses allow the LPC2387 to consolidate several communications functions on one controller. Two PWM channels and four general-purpose timers support motor, lighting, and periodic timing functions. Real-time emulation and ISP/IAP capabilities also assist development, production programming, and field firmware updates. Typical uses include industrial Ethernet controllers, CAN-connected automation equipment, USB-to-serial and protocol bridges, medical monitoring systems, and embedded data-acquisition units. The 100-pin LQFP package exposes the extensive set of GPIO and high-speed interface pins needed by these applications. Its 3 V operating range is suitable for conventional 3.3 V embedded systems when appropriate decoupling and signal-integrity practices are followed. Designers should preserve the supply-voltage and decoupling requirements in the manufacturer datasheet, assign Ethernet and USB signals with controlled-impedance routing, and confirm that every external signal remains within its operating limits. Firmware replacement should also account for differences in memory organization and peripheral availability rather than assuming that a processor with a similar pin arrangement is functionally interchangeable. This product page combines the LPC2387FBD100K architecture, interface inventory, package information, sourcing guidance, and verified pin-compatible alternatives with practical guidance for evaluating an industrial embedded-controller design. It highlights where the LPC2387 is strongest and where a replacement may require firmware or peripheral-level verification.

Permintaan RFG Kontak
LPC2388FBD144K - 72MHz ARM7 MCU, 512KB Flash | NXP
LPC2388FBD144K

LPC2388FBD144K - 72MHz ARM7 MCU, 512KB Flash | NXP

NXP Semiconductors LPC2388FBD144K is an ARM7TDMI-S 16-bit/32-bit microcontroller operating up to 72 MHz, with 512 KB of embedded flash, 98 KB of SRAM, and a 144-LQFP 20 x 20 mm package. The device integrates Ethernet MAC, USB 2.0 Device, Host and OTG, two CAN channels, and extensive serial and analog peripherals for connected embedded systems. A microcontroller is a programmable semiconductor that integrates a processor core, memory, and peripherals into one device. The LPC2388 belongs to the ARM7 microcontroller family and the LPC2300 series, positioning it between a general-purpose embedded CPU and a highly integrated system-on-chip. It is designed for industrial equipment, communications equipment, data acquisition, control panels, and USB- or Ethernet-connected products. Key features include 512 KB of high-speed embedded flash with ISP and IAP support, 98 KB of SRAM, a 128-bit memory interface, and an accelerator architecture that supports 32-bit code execution at the maximum clock rate. Communication interfaces include Ethernet MAC, USB 2.0 Device, Host and OTG, four UARTs, two CAN channels, three SSP/SPI interfaces, three I2C interfaces, and I2S. An 8-channel 10-bit ADC and 10-bit DAC support analog measurement and output functions. The 72 MHz ARM7TDMI-S core uses a 32-bit architecture, while a 16-bit Thumb instruction set supports compact code. A 128-bit external memory interface and accelerator architecture improve code execution and interrupt-service performance. The integrated Ethernet MAC, USB controller, CAN channels, DMA, and low-power Real-Time Clock reduce the need for external interface components in connected industrial designs. Typical applications include Ethernet-connected industrial controllers, USB data-acquisition equipment, CAN-based automation systems, communications gateways, medical instrumentation, and embedded control systems. The combination of local flash, SRAM, analog conversion, and multiple serial interfaces supports standalone control as well as networked data collection. Designers should assign every pin by consulting the LPC2388 manufacturer datasheet, especially the multiplexing and startup functions shared by boundary, Ethernet, USB, and analog pins. The 144-LQFP footprint requires careful escape routing, while external crystal, reset, and power-supply arrangements must follow the recommended application circuit. This page consolidates the key MCU specifications, interface capabilities, application guidance, and available sourcing path into one engineering-focused reference. It also distinguishes the exact LPC2388FBD144K ordering code from related LPC2388 variants to reduce procurement and footprint-selection errors.

Permintaan RFG Kontak
LPC2420FBD208K - 72MHz ARM7 ROMless MCU | NXP | Ethernet
LPC2420FBD208K

LPC2420FBD208K - 72MHz ARM7 ROMless MCU | NXP | Ethernet

The NXP LPC2420FBD208K is a flashless 16-bit/32-bit ARM7 microcontroller with a 72 MHz Arm7TDMI-S CPU, Ethernet, CAN, USB 2.0, ISP/IAP, and an external memory interface, housed in a 208-pin LQFP package measuring 28 mm by 28 mm. It executes both 32-bit ARM and 16-bit Thumb instructions, allowing firmware developers to optimize code size and execution speed. A microcontroller is a programmable semiconductor that integrates a CPU core, memory interfaces, communication peripherals, timers, and I/O control into one device. The LPC2420 belongs to the NXP LPC2400 family of embedded processors. Because this variant is ROMless, its application program must be stored in external memory and transferred through the external memory interface or programming path. This arrangement separates program storage from the MCU, supporting larger code, field-updateable firmware, or memory sharing. The LPC2420's principal communication features include Ethernet, CAN, and USB 2.0 operating in device, host, and OTG roles. ISP/IAP support provides a practical path for programming and in-application firmware updates, while JTAG and embedded trace interfaces support real-time debugging. These capabilities make the device suitable for industrial gateways, USB-to-Ethernet bridges, embedded network controllers, service equipment, and data acquisition systems that need both wired networking and field maintenance. The Arm7TDMI-S architecture supports deterministic embedded control while providing an established 16-bit/32-bit instruction set. A 72 MHz clock provides the execution rate for protocol handling, peripheral management, and control logic, while the external memory interface permits storage access beyond the device's internal program memory. The absence of integrated flash makes external boot memory, firmware loading, and board-level memory design central to the system architecture. Typical implementations include Ethernet-connected industrial controllers, CAN-equipped machine controls, USB-to-serial or USB-to-network gateways, and embedded test systems. For each design, engineers must confirm the external memory device, bus timing, boot configuration, interrupt priorities, and communication isolation requirements. The manufacturer datasheet should also be used to establish the complete pin assignment, clock configuration, power requirements, and recommended decoupling network. A key design consideration is that ROMless operation requires deliberate implementation of the boot and firmware chain. The external memory interface, reset behavior, and ISP/IAP pathway must work together reliably before application code is available. PCB design should preserve the package's 28 mm by 28 mm LQFP geometry, provide stable supply rails, route high-speed memory signals consistently, and keep switching or high-current circuitry away from sensitive clock and communication nodes. This product record combines the verified 72 MHz ARM7 architecture, flashless configuration, communication peripherals, 208-LQFP mechanical format, and practical engineering guidance with sourced purchase information. It is intended to help designers evaluate interface coverage, memory architecture, debug access, package constraints, and system-level integration before committing an LPC2400-series design to hardware.

Permintaan RFG Kontak
LPC2468FBD208,551 - ARM7 MCU 72MHz 512KB Flash | NXP
LPC2468FBD208551

LPC2468FBD208,551 - ARM7 MCU 72MHz 512KB Flash | NXP

The NXP LPC2468FBD208,551 is a single-chip 16-bit/32-bit ARM7TDMI-S microcontroller running at up to 72 MHz with 512 kB of on-chip high-speed flash memory, integrated 10/100 Ethernet MAC, CAN 2.0B controllers, and USB 2.0 device/host/OTG, housed in a 208-pin LQFP (28 x 28 mm) package. A microcontroller (MCU) is a complete computer-on-a-chip that integrates a processor core, program memory, data memory, and peripherals in a single package, forming the core of embedded control systems. Within the semiconductor hierarchy, the LPC2468 belongs to the Arm7TDMI-S-based microcontroller family, which sits above discrete processors in integration level and below modern Cortex-M cores in power efficiency, making it a workhorse for legacy and industrial embedded designs. Key differentiating features include the 128-bit-wide flash memory interface with accelerator architecture that lets the 72 MHz CPU execute code from flash with minimal stall cycles, and a rich peripheral set: a 10/100 Ethernet MAC with dedicated DMA, two CAN 2.0B controllers, full-speed USB 2.0 device/host/OTG, an external memory controller supporting SRAM, NOR flash, and SDRAM, multiple UARTs, SPI, I2C, I2S, a 10-bit ADC, and a motor-control PWM block. Technically, the LPC2468 combines the Arm7TDMI-S CPU with real-time debug interfaces including JTAG and embedded trace (ETM), enabling non-intrusive debugging on complex designs. In-system programming (ISP) and in-application programming (IAP) allow firmware updates over UART, USB, Ethernet, or CAN without removing the chip from the board. Typical applications include industrial networking gateways bridging Ethernet and CAN, motor and motion-control systems using the quadrature encoder and PWM peripherals, and general-purpose embedded controllers in factory automation and building control. Design consideration: the core requires a single 3.0 V to 3.6 V supply; plan PCB decoupling with multiple 0.1 uF ceramics per supply pin group and account for the Ethernet PHY requirements in networked designs. This page synthesizes distributor pricing, drop-in alternatives, design notes, and FAQ content not found in the NXP datasheet alone.

Permintaan RFG Kontak
LPC2468FBD208K - 72MHz ARM7 MCU with 512KB Flash | NXP
LPC2468FBD208K

LPC2468FBD208K - 72MHz ARM7 MCU with 512KB Flash | NXP

NXP Semiconductors LPC2468FBD208K is a single-chip 16-bit/32-bit ARM7TDMI-S microcontroller operating at 72 MHz, with 512 KB of on-chip flash and a 208-pin LQFP package measuring 28 mm by 28 mm. The device combines an Ethernet controller, CAN controller, USB 2.0 device, host and OTG support, ISP/IAP programming, an external memory interface, JTAG, and embedded trace capabilities in one integrated controller. A microcontroller is a programmable semiconductor that integrates a CPU core, memory, and peripheral interfaces into a single device. The LPC2468 belongs to the ARM7-based LPC2400 family, combining real-time microcontroller operation with communications peripherals for industrial control, embedded networking, data acquisition, and human-interface equipment. Its architecture makes it suitable where deterministic embedded control and multiple communication standards are required on one board. The principal features of the LPC2468FBD208K include 512 KB of high-speed flash, a 72 MHz ARM7TDMI-S core, and support for Ethernet, CAN, and USB 2.0. The flash accelerator uses a 128-bit-wide memory interface, while the CPU supports JTAG and embedded trace for real-time debug access. An external memory interface permits additional storage or peripheral interfacing when the internal resources are insufficient. The 208-pin LQFP exposes the device's extensive communications and control peripherals while providing a larger package than smaller LPC2400-family members. This expanded connection set is useful when a design requires simultaneous network connectivity, industrial CAN communication, USB peripheral operation, and conventional digital I/O. The broad package also leaves more pins available for dedicated functions than compact 100-pin or 144-pin alternatives. Typical applications include industrial Ethernet controllers, CAN-connected factory equipment, USB-to-serial and protocol-conversion equipment, embedded data loggers, laboratory instruments, and industrial gateways. The Ethernet and CAN interfaces are particularly useful for supervisory control and data-acquisition systems, while USB 2.0 support simplifies connection to host computers and service equipment. ISP and IAP capabilities support production programming and controlled firmware updates. A critical design consideration is package and firmware compatibility. Board designers must preserve the 208-pin LQFP footprint, assign all supply and ground pins correctly, and confirm peripheral multiplexing before routing signals. Software development should use an ARM7TDMI-S-compatible toolchain and validate the intended ISP, JTAG, Ethernet, CAN, and USB paths on the final hardware. The manufacturer datasheet remains the controlling reference for pin assignments, electrical limits, and initialization requirements. This page combines manufacturer specifications, verified distributor listings, practical interface-selection guidance, and a comparison of the LPC2468 with closely related NXP controllers. It helps engineers distinguish exact package variants from devices with different pin counts while focusing on the resources needed to design reliable embedded communications equipment.

Permintaan RFG Kontak
LPC2468FET208K - 72MHz ARM7 MCU with 512KB Flash | NXP
LPC2468FET208K

LPC2468FET208K - 72MHz ARM7 MCU with 512KB Flash | NXP

The NXP Semiconductors LPC2468FET208K is a single-chip 16-bit/32-bit ARM7TDMI-S microcontroller operating at up to 72 MHz, with 512 KB of on-chip flash and 100,352 bytes of RAM in a 208-pin TFBGA package measuring 15 mm × 15 mm. It integrates Ethernet, CAN, USB 2.0 device, host and OTG functionality, an external memory interface, ISP/IAP support, and JTAG with embedded trace for real-time debugging. A microcontroller is an integrated semiconductor device containing a processor core, memory, peripherals, and interface logic on one die. The LPC2468 belongs to the ARM7 microcontroller hierarchy, where ARM7TDMI-S combines a 32-bit RISC processor with Thumb instruction support. This combination gives the device both 16-bit and 32-bit execution capabilities while providing dedicated Ethernet, CAN, USB, and real-time debug resources within a single package. The principal features of the LPC2468FET208K include a 72 MHz maximum clock, 512 KB of high-speed on-chip flash, and 100,352 bytes of on-chip RAM. Its communications block supports Ethernet, CAN, and USB 2.0 device, host, and OTG operation. The controller also provides ISP and IAP capabilities for in-system or in-application programming, while JTAG and embedded trace support board-level debugging and real-time trace analysis. The LPC2468 is built around the 16-bit/32-bit Arm7TDMI-S RISC core, with a 24-bit address bus and 160 I/O lines. Its 3.3 V operating supply and extensive on-chip connectivity suit embedded control platforms that need more than a basic processor. Ethernet, CAN, and USB interfaces allow the same device to bridge wired networking, industrial communication, and USB host or peripheral functions without requiring several discrete interface controllers. Typical applications include industrial Ethernet controllers, CAN-connected factory equipment, USB-to-embedded bridges, networked industrial control units, medical equipment, and communications infrastructure. The 208-pin TFBGA package provides access to the wide peripheral and I/O set, while the integrated debug architecture helps developers diagnose timing-sensitive firmware and communication issues directly on the target board. Designers should verify the complete pin assignment and exposed-pad requirements in the manufacturer datasheet before layout release. Decoupling, high-speed signal integrity, ground-plane continuity, and external-memory routing are especially important in a 208-pin ball-grid-array design. Confirm the PCB stack-up and escape-routing strategy against the package drawing rather than inferring connectivity from the commercial part description. This product page organizes the verified LPC2468FET208K specifications, package information, connectivity features, application guidance, and sourcing workflow. It also distinguishes published parameters from values that still require confirmation from the official LPC2468 datasheet, helping engineers make a technically defensible design decision.

Permintaan RFG Kontak
LPC2478FBD208K - 72MHz ARM7 MCU, 512KB Flash | NXP
LPC2478FBD208K

LPC2478FBD208K - 72MHz ARM7 MCU, 512KB Flash | NXP

NXP Semiconductors LPC2478FBD208K is a single-chip 16-bit/32-bit microcontroller based on the ARM7TDMI-S core, operating at 72 MHz with 512 KB of flash memory in a 208-LQFP 28 x 28 mm package. It integrates Ethernet, CAN, LCD, USB 2.0 device, host, and OTG connectivity, plus an external memory interface for communications and display-oriented embedded systems. A microcontroller is a programmable semiconductor that combines a processor core, memory, peripherals, and communication interfaces on one integrated circuit. The LPC2478 belongs to the microcontroller hierarchy, combining general-purpose embedded processing with network connectivity and human-machine-interface support. Its integrated interfaces reduce the need for separate protocol controllers while preserving expansion through external memory. The device's principal features include an ARM7TDMI-S core, 72 MHz operating frequency, 512 KB flash, Ethernet, CAN, LCD, and USB 2.0 device, host, and OTG functions. According to the NXP product information, the USB controller supports device, host, and OTG operating roles, making the MCU applicable to devices that exchange data with a host, connect USB peripherals, or operate as a USB host themselves. The LPC2478 architecture is intended for embedded systems requiring several communication paths and display support without relying on discrete interface components. Ethernet supports network-connected equipment, CAN supports industrial communication, and LCD control supports graphical human-machine interfaces. The external memory interface can extend system memory or connect additional peripherals where application data or graphics requirements exceed the internal resources. Typical applications include industrial control equipment, medical systems, HMI panels, USB-to-Ethernet gateways, CAN-connected controllers, data acquisition units, and embedded network appliances. The combination of 72 MHz processing, 512 KB flash, and multiple integrated communications interfaces makes the part suitable for local control tasks that also need connectivity to a host, network, or industrial bus. PCB design should preserve the 208-LQFP footprint, adequate power and ground distribution, and short high-frequency return paths. The external memory interface and USB communications require careful signal-integrity layout, while LCD and industrial interfaces should be routed away from switching nodes. Validate timing, impedance, decoupling, and peripheral assignments against the manufacturer datasheet before production release. This page combines the manufacturer product information, distributor listings, interface and memory requirements, package constraints, and practical replacement guidance to help engineers evaluate the LPC2478FBD208K for connected embedded-control designs.

Permintaan RFG Kontak