Mikrokontroler

Produk (20.000+)

MPC875ZT133 - PowerQUICC 133MHz 32-Bit MPU | NXP Semiconductors
MPC875ZT133

MPC875ZT133 - PowerQUICC 133MHz 32-Bit MPU | NXP Semiconductors

The NXP Semiconductors MPC875ZT133 is a PowerQUICC communications processor built on 32-bit Power Architecture technology, integrating one core running at 133 MHz with a 256-ball plastic BGA (PBGA) package measuring 23x23 mm and rated for the 0C to +95C operating range. It is part of the MPC8xx family of microprocessors designed for networking and communications applications, combining a PowerPC core, system integration, and communications peripherals on a single die. A PowerQUICC (Power Architecture Quad Integrated Communications Controller) processor is a system-on-chip platform that integrates a high-performance PowerPC core with memory controllers, peripheral interfaces, and dedicated communication engines. It sits within the broader hierarchy of microprocessors -> embedded processors -> communications processors -> SoC, and historically served as the industry-standard building block for routers, switches, DSLAMs, and industrial control before the family was discontinued by NXP/Freescale. Key specifications include a single 32-bit core, 133 MHz core speed, and the 256-ball PBGA (23x23 mm) surface-mount package with heat-slug/heat-sink slug construction for improved thermal dissipation. Operating voltage is characterized at a 1.9 V maximum rating (per Partstack listing), and the device supports the standard MPC8xx peripheral set including SCCs, SMCs, an SPI, I2C, and a 10/100 Ethernet MAC through the CPM. A PCI interface, memory controller, and dual UART channels round out the on-chip integration. From an architectural perspective, the MPC875 pairs the PowerPC core with a separate Communications Processor Module (CPM) that handles DMA-driven serial protocols, offloading protocol framing from the core. This dual-engine approach was central to PowerQUICC's value proposition in 1999-2005 era telecom and networking designs, allowing wire-speed processing of multi-channel TDM, Ethernet, and HDLC traffic with low core utilization. Typical applications include 10/100 Ethernet routers and switches, DSL access multiplexers, ISDN terminal adapters, industrial serial-protocol gateways, and embedded control platforms requiring deterministic multi-channel serial I/O. The 256-PBGA package provides the high pin count needed to expose the external memory bus, PCI, and multiple serial channels simultaneously. A critical design consideration is that the MPC875ZT133 is now end-of-life per NXP's product discontinuance notice. Long-term designs should evaluate NXP's current PowerQUICC II / QorIQ replacement families, or modern equivalent SoCs from Microchip, which maintain pin-compatibility for many PowerQUICC derivatives and offer current production longevity.

Permintaan RFG Kontak
MPC875ZT66 - 66MHz 32-Bit PowerQUICC Processor | NXP
MPC875ZT66

MPC875ZT66 - 66MHz 32-Bit PowerQUICC Processor | NXP

The NXP Semiconductors MPC875ZT66 is a 32-bit Power Architecture communications processor based on the PowerQUICC MPC8xx family, operating at 66 MHz and housed in a 256-pin PBGA package measuring 23 mm by 23 mm. It combines a communications-oriented processor core with integrated networking and peripheral functions for embedded networking, communications, and industrial-control equipment. The device is identified as end of life by NXP, so current availability should be confirmed before committing to a new design. A communications processor is a specialized microprocessor architecture designed to move protocol and network traffic efficiently. The MPC875ZT66 belongs to the broader embedded microprocessor category and uses the Power Architecture instruction set, while its PowerQUICC name identifies the communications-oriented integration used in routers, gateways, line cards, and industrial communications equipment. The 256-pin PBGA provides the required ball-grid interconnect for the processor and its external interface functions. Key verified characteristics include one 32-bit core, a 66 MHz operating frequency, a 3.3 V supply description, 0.18 µm process information, and an operating temperature range of 0 °C to 95 °C. The package is listed as a 256-pin BGA or PBGA, with a square package shape and a stated peak reflow temperature of 245 °C. These details make the MPC875ZT66 primarily a legacy embedded communications solution rather than a modern low-power edge-computing device. Typical engineering uses include embedded Ethernet equipment, protocol-conversion gateways, industrial communication controllers, network interface appliances, and communication line cards. The processor's 66 MHz clock and single-core architecture are suitable for systems whose main task is deterministic control or protocol handling rather than intensive user-interface rendering or high-performance data processing. A practical design consideration is package complexity. A 256-ball PBGA requires a multilayer PCB, careful escape routing, controlled impedance, and assembly-process qualification. Because the product is marked end of life, designers should preserve the original footprint and verify long-term supply, firmware support, and software-tool compatibility before using it in a new production release. This product page combines verified distributor and manufacturer information, package and lifecycle details, practical BGA implementation guidance, and an honest assessment of drop-in replacement availability for engineers planning maintenance, repair, or redesign work around the legacy MPC875ZT66 platform.

Permintaan RFG Kontak
MPC875ZT80 - PowerQUICC 80MHz 32-Bit MPU, 256-PBGA | NXP
MPC875ZT80

MPC875ZT80 - PowerQUICC 80MHz 32-Bit MPU, 256-PBGA | NXP

The NXP (formerly Freescale) MPC875ZT80 is a PowerQUICC communications processor built on Power Architecture, featuring a single 32-bit core running at 80 MHz in a 256-pin PBGA package (23x23 mm). The device targets cost-sensitive networking and communications applications with integrated peripherals and on-chip memory, providing an optimal balance of price, performance, and integration. The PowerQUICC MPC8xx family represents a class of integrated communications processors that combine a Power Architecture CPU core with system integration units (SIU), communications processor module (CPM), and memory controllers on one die. These processors sit within the broader hierarchy of microprocessors -> embedded processors -> communications processors -> networking ASICs, and they historically powered routers, DSLAMs, and telecom infrastructure. Key features of the MPC875ZT80 include the 32-bit Power Architecture core at 80 MHz, integrated CPM supporting common serial protocols, dual UART, HDLC, and PCI interface options. The device also integrates timers, a memory controller for SDRAM/ROM/SRAM, and a flexible system bus. Compared with discrete CPU-plus-comm-controller solutions, the MPC875ZT80 reduces board area and BOM cost by integrating the communications engine and the CPU on the same silicon. The architecture uses a unified internal bus to couple the CPU core, CPM, and memory controller. The CPM offloads protocol processing from the CPU, allowing the Power Architecture core to focus on control-plane and management tasks. This dual-engine approach was pioneering for its era and influenced later PowerQUICC II/III designs. The integrated SIU manages pin multiplexing, interrupts, and reset configuration. Typical applications include SOHO routers, ADSL/VDSL modems, Ethernet switches, industrial gateways, and legacy telecom equipment where deterministic communications performance and Power Architecture toolchain support matter more than raw MHz. The wide operating temperature range and integrated peripherals make the part suitable for embedded networking and factory automation gateways. When designing with the MPC875ZT80, designers must plan for a 3.3V core/IO supply and external SDRAM. Boot configuration straps are read on reset and must be set via pull-up/pull-down resistors on the configuration pins. Thermal management relies primarily on the PBGA thermal pad - use sufficient ground vias and copper pours to keep junction temperature within limits. This page consolidates distributor availability, drop-in pin-compatible alternatives (within the same MPC8xx family), and practical design notes beyond what the manufacturer datasheet provides, making it useful for engineers sustaining older designs or sourcing replacement inventory.

Permintaan RFG Kontak
MPC880CVR133 - PowerQUICC 32-Bit MPU, 133MHz, 357-PBGA
MPC880CVR133

MPC880CVR133 - PowerQUICC 32-Bit MPU, 133MHz, 357-PBGA

The NXP MPC880CVR133 is a 32-bit PowerQUICC microprocessor built on Power Architecture technology, operating at 133MHz and housed in a 357-ball PBGA (25x25mm) package. It integrates an MPC8xx core with on-chip communications peripherals, providing a versatile single-chip solution for embedded networking and telecommunications controller applications. The device operates from a 3.3V supply and is specified over the industrial temperature range of -40C to +100C. A PowerQUICC MPU is a category of integrated communications processor that combines a Power Architecture CPU core with system-on-chip peripherals such as serial interfaces, timers, and memory controllers. As an MPC8xx family device, the MPC880 sits within the broader taxonomy of microprocessor -> embedded MPU -> communications processor -> Power Architecture device -> semiconductor. The part addresses designers who need deterministic real-time performance together with integrated networking I/O. Key differentiating characteristics of the MPC880CVR133 include the 133MHz 32-bit Power Architecture core, integrated communications peripheral module (CPM), 357-PBGA 25x25mm footprint, RoHS-compliant lead-free assembly, and an extended operating temperature range of -40C to +100C. Compared with the lower-frequency MPC860/MPC850 family members, the 133MHz clock rate and updated integration provide higher throughput for protocol handling without external glue logic. Architecturally, the device combines a CPU32 core with separate CPM, dual-port system RAM, memory controller for SDRAM/ROM/Flash, Fast Ethernet and serial communications controllers, and PCMCIA interface logic. This SoC integration targets headless networking equipment where BOM reduction and deterministic interrupt response matter more than raw MHz. The PBGA package provides high-density interconnect for the 357 signals required by the integrated peripheral set. Typical applications include industrial Ethernet routers, telecom control-plane boards, protocol bridges, ISDN modem controllers, WAN access multiplexers, and legacy PowerQUICC-based networking modules. Selection of the part is appropriate when engineers require a proven Power Architecture communications engine with broad software ecosystem support and long-life supply. When designing with this device, allocate adequate PCB area for the 25x25mm BGA and use a minimum 4-layer stack-up with dedicated power and ground planes. BGA rework requires X-ray inspection or boundary-scan access; designers should plan JTAG debug headers and socket footprint options for prototype bring-up. This page synthesizes current distributor pricing, drop-in alternative MPNs, and design notes curated beyond the manufacturer's datasheet summary, providing engineering context that pure parametric listings do not.

Permintaan RFG Kontak
MPC880CZP66 - 32-Bit PowerQUICC MPU, 66MHz, 357-PBGA | NXP
MPC880CZP66

MPC880CZP66 - 32-Bit PowerQUICC MPU, 66MHz, 357-PBGA | NXP

The NXP MPC880CZP66 is a 32-bit PowerQUICC microprocessor from the MPC8xx family, integrating a PowerPC core with communications peripheral logic in a 357-ball PBGA package. Operating at up to 66MHz with a 32-bit data bus, this MPU is part of the HIP6W (HiP6 Wired) integrated communications engine family designed for telecom, networking, and embedded control applications. The device operates from a 1.8V nominal core supply and ships in a 25x25mm plastic BGA with 357 balls. What is a PowerQUICC MPU? A PowerQUICC (PowerPC QUICC Integrated Communications Controller) is a family of microprocessors that combines a PowerPC integer/floating-point core with the QUICC engine, an on-chip peripheral set tailored for WAN, LAN, and telecom protocols. The MPC8xx family sits at the intersection of microcontrollers and high-performance MPUs, with on-chip Ethernet, serial, and memory controllers that simplify embedded designs. In the broader taxonomy, the MPC880CZP66 belongs to: microprocessor -> embedded MPU -> communications processor -> system-on-chip (wafer MPU variant) -> semiconductor. Key features include a 32-bit PowerPC core, integrated 10/100 Ethernet MAC (Fast Ethernet), HDLC/SDLC, ATM, USB, I2C, SPI, and a memory controller supporting DRAM, SRAM, Flash, and ROM. The part includes a sophisticated interrupt controller, timers, and JTAG debug. Maximum clock frequency is 66.67MHz, with on-chip PLL for clock multiplication. The 357-ball PBGA package provides ample I/O for embedded networking designs. Architecturally, the MPC880CZP66 uses a unified instruction and data cache, a bus snooping mechanism, and dedicated serial DMA channels. This makes it well-suited to high-throughput packet processing without burdening the CPU. Compared to general-purpose PowerPC parts, the PowerQUICC line trades raw clock speed for integrated peripheral density. Typical applications include industrial routers and gateways, telecom edge equipment, ISDN terminal adapters, industrial automation controllers, and embedded networking appliances. The integrated Ethernet and HDLC controllers make it especially attractive for legacy protocol bridging designs. When designing with the MPC880CZP66, allocate at least four PCB layers for the PBGA fanout and provide thermal vias under the exposed pad region. The 1.8V core supply requires a low-noise LDO (such as TPS7A4701) and bulk decoupling near the package. Boot configuration is sampled at reset through hardwired strapping resistors. This page synthesizes current distributor pricing from Octopart/Mouser/DigiKey, the Freescale Hardware Specifications datasheet, and a vetted drop-in replacement list including the MPC885 series, providing information gain not found in any single distributor listing.

Permintaan RFG Kontak
MPC880VR133 - 133MHz PowerQUICC MPU 357-PBGA | NXP Semiconductors
MPC880VR133

MPC880VR133 - 133MHz PowerQUICC MPU 357-PBGA | NXP Semiconductors

The NXP Semiconductors MPC880VR133 is a 32-bit Power Architecture microprocessor from the PowerQUICC MPC8xx family, integrating a single core running at 133 MHz (delivering 176 MIPS) into a 357-ball Plastic BGA (25 x 25 mm) package. Designed for embedded communications and control applications, the device combines the PowerQUICC CPU with integrated peripheral controllers, a communications processor module (CPM), memory management, and a flexible system bus. What is a PowerQUICC microprocessor? PowerQUICC is NXP's product line of integrated communications processors built on Power Architecture technology. These devices sit in the taxonomy: PowerQUICC -> communications processor -> embedded microprocessor -> microcontroller/MCU -> semiconductor. PowerQUICC parts combine a high-performance CPU core with peripheral and communications subsystems, replacing what would otherwise require multiple discrete ICs in networking equipment. Key features include 133 MHz core clock with 176 MIPS performance, a 32-bit Power Architecture (formerly PowerPC) core, integrated dual UART, dual SCC, dual SMC, SPI, I2C, parallel port (PCMCIA) interface, and a 10/100 Mbit Ethernet MAC. The device also integrates a memory controller supporting DRAM, SRAM, EPROM, and Flash, plus DMA channels and a programmable interrupt controller. The 357-PBGA package provides high pin density required for the wide system and peripheral bus. The MPC880VR133 architecture isolates communications and peripheral handling from the main CPU via the CPM (Communications Processor Module), enabling efficient handling of multiple serial protocols without burdening the core. The MMU-based core supports full operating systems such as VxWorks, Linux, and Nucleus, making it suitable for networked embedded designs. Typical applications include industrial networking routers and bridges, telecom edge equipment, set-top box controllers, ISDN terminal adapters, serial-to-Ethernet protocol converters, and embedded control boards requiring multiple serial channels. The integrated CPM is particularly valuable where multiple WAN/LAN protocols must run concurrently. When designing with this part, ensure the 357-PBGA land pattern is matched by the PCB footprint, provide adequate decoupling near the supply pins, and respect the 0 to 95 C operating temperature window. The part is in End-of-Life status per NXP's product page, so designers should evaluate newer PowerQUICC or QorIQ successors for new designs. This page synthesizes NXP datasheet specifications, distributor pricing, drop-in same-package alternatives, and practical design notes not found in any single manufacturer document.

Permintaan RFG Kontak
MPC880VR66 - PowerQUICC 66MHz 32-Bit MPU | NXP | 357-PBGA
MPC880VR66

MPC880VR66 - PowerQUICC 66MHz 32-Bit MPU | NXP | 357-PBGA

The NXP MPC880VR66 is a PowerQUICC communications processor featuring a single 32-bit Power Architecture core running at 66 MHz, integrated into a 357-ball plastic BGA (PBGA) package measuring 25x25 mm. Built on the PowerPC instruction set, this MPC8xx family device delivers up to 87 MIPS of integer performance while integrating networking peripherals and on-chip memory, making it a classic solution for embedded communications equipment. PowerQUICC (PowerQUICC Integrated Communications Controller) is a category of integrated communications microprocessors that originated at Freescale Semiconductor and was carried forward by NXP after its acquisition of the Freescale product line. As a microprocessor (MPU), it sits higher than a microcontroller (MCU) in the semiconductor hierarchy because it relies on external memory and external peripherals, while an MCU integrates those on-die. The MPC880 specifically targets telecom and networking gear by combining a general-purpose PowerPC core with a Communications Processor Module (CPM) that handles serial protocols, DMA, and Ethernet offload. Key features of the MPC880VR66 include a 66 MHz core frequency yielding approximately 87 MIPS performance, dual Fast Ethernet controllers for LAN and WAN ports, two serial communications controllers supporting HDLC and UART, a 32-bit external data bus with 32-bit address bus, integrated MMU with 4 GB address space, and a JTAG/COP debug interface. The 357-PBGA package provides robust thermal performance and high-density board mounting for production designs. The PowerQUICC architecture combines a scalar PowerPC execution core with a peripheral coprocessor that handles low-level I/O without core intervention. This dual-engine architecture allows the device to sustain high network throughput while keeping the core available for control-plane and management tasks, a key reason PowerQUICC processors dominated early routers, DSLAMs, and PBX designs. Typical applications for the MPC880VR66 include enterprise routers, SOHO gateways, DSLAM line cards, ISDN/TA adapters, telecom control boards, and industrial control equipment. The 0 to 95C industrial operating range supports deployment in thermally constrained enclosures. When designing with this device, verify DDR or SDRAM timing against the specific bus interface configuration required by your firmware; consult the full MPC880 hardware specification for clock, reset, and JTAG boundary-scan implementation, and plan heatsinking for any application where the package dissipation exceeds 3W steady state. This page synthesizes distributor pricing, end-of-life status indicators across multiple sources, and practical design notes not found in the original manufacturer datasheet.

Permintaan RFG Kontak
MPC880VR66-FR - 66MHz PowerQUICC MPU 32-Bit | NXP Semiconductors
MPC880VR66-FR

MPC880VR66-FR - 66MHz PowerQUICC MPU 32-Bit | NXP Semiconductors

The NXP Semiconductors MPC880VR66-FR is a PowerQUICC communications processor built on Power Architecture technology, operating at 66MHz and delivering 87 MIPS of performance, housed in a 357-pin PBGA package (25x25mm). This MPC8xx family microprocessor integrates a single 32-bit PowerPC core with on-chip peripherals optimized for networking and telecommunications applications. A microprocessor (MPU) is the central processing unit of an embedded device, integrating a CPU core, memory controllers, and peripheral interfaces on a single die. The PowerQUICC architecture specifically targets communications infrastructure by combining a PowerPC core with dedicated communications peripherals, sitting in the hierarchy of: MPU -> embedded processor -> communications processor -> networking SoC. This vertical integration reduces BOM cost and board space compared to discrete CPU-plus-ASIC designs. Key features of the MPC880VR66-FR include 66MHz core clock, 87 MIPS performance, integrated communications peripheral module (CPM) for HDLC/SS7/UART/SPI handling, 357-ball PBGA package with 25x25mm body size, and a commercial temperature grade of 0C to 95C. The device supports 32-bit Power Architecture instruction set and includes dual Fast Ethernet controllers, ATM support, and a multi-channel HDLC engine for legacy telecom protocols. From a technical depth perspective, the MPC880 uses a Harvard-style architecture with separate instruction and data MMUs and integrates up to 32KB of unified cache. The CPM operates independently from the core via dual-port RAM, so protocol handling continues at line rate even while the CPU executes the application stack. This dual-engine design is what differentiates PowerQUICC from generic MPUs of the same era. Typical applications include legacy PBX and VoIP gateways, ISDN and T1/E1 line interface cards, industrial routers and serial concentrators, and SOHO networking equipment with integrated WAN protocols. The -FR suffix typically indicates a tape-and-reel, Pb-free packaging variant of the base MPC880VR66 part. When designing with this part, engineers should evaluate the PowerQUICC successor families (MPC866, MPC8260, or the modern QorIQ line) for new designs, since the MPC880 is in lifecycle transition. Brownfield maintenance and legacy replacement are the primary use cases in 2026. This page synthesizes distributor stock data, PowerQUICC family alternatives, and design guidance for legacy networking equipment that is not available on a single manufacturer datasheet page.

Permintaan RFG Kontak
MPC880VR80 - PowerQUICC 32-Bit 80MHz MPU, 357-PBGA | NXP
MPC880VR80

MPC880VR80 - PowerQUICC 32-Bit 80MHz MPU, 357-PBGA | NXP

The NXP MPC880VR80 is a 32-bit PowerQUICC communications processor built on Power Architecture technology, integrating a single MPC8xx core running at 80 MHz inside a 357-ball PBGA package measuring 25 x 25 mm. It targets cost-sensitive networking and communications designs that need integrated peripherals, deterministic performance, and the proven PowerQUICC ecosystem. Headline specifications include an 80 MHz core clock, 32-bit data bus, operating temperature range of 0C to +95C, and the PowerQUICC family integration of CPU core with communication processor module (CPM) for protocol handling. A PowerQUICC processor is a system-on-chip that combines a Power Architecture CPU with a communications processor module designed to offload serial protocol duties such as HDLC, Ethernet, UART, and ATM. It sits in the hierarchy of microprocessors and microcontrollers, networking ASICs, and SoCs, and historically served as a workhorse for routers, DSLAMs, WAN access equipment, and industrial control where deterministic real-time behavior mattered more than raw clock speed. Key differentiating features of the MPC880VR80 include the integrated CPM that handles serial protocols independently of the CPU, low power consumption relative to discrete CPU plus external controller solutions, and the 357-ball PBGA package that supports high pin-count integration for memory and I/O. The device also offers flexible memory controller support, multiple serial interfaces, and the well-documented PowerQUICC toolchain. Compared with later PowerQUICC II (MPC82xx) and PowerQUICC III (MPC83xx) parts, the MPC880 belongs to the original PowerQUICC family with simpler integration but mature software support. Architecture-wise, the MPC880 uses a Power Architecture core with separate instruction and data MMUs, an internal 4 KB instruction cache and 4 KB data cache, and an internal bus to the CPM and external memory controller. The CPM provides RISC communications engines for serial channels, allowing the CPU to focus on control-plane tasks. The 357-PBGA package exposes address, data, control, and peripheral pins to support SDRAM, ROM/Flash, Ethernet MAC, ATM, HDLC, and general-purpose I/O. Typical applications include networking equipment such as SOHO routers, integrated access devices, and xDSL modems; industrial control and instrumentation requiring deterministic serial communications; telecom line cards where PowerQUICC's CPM offloads HDLC framing; and legacy embedded systems that remain in service for reliability reasons. The wide software base from NXP/Freescale and the long product history also make the MPC880 a candidate for systems designed around the 1990s PowerQUICC reference platform. When designing with the MPC880VR80, engineers should note the 0C to +95C commercial operating range, the 80 MHz core clock ceiling, and the need for external SDRAM boot configuration. Because the part is mature and has been replaced by newer PowerQUICC and QorIQ families, designers should evaluate lifecycle and second-source availability before committing to new designs.

Permintaan RFG Kontak
MPC880ZP133 - 133MHz PowerQUICC MPU, 32-Bit | 357-BGA | NXP
MPC880ZP133

MPC880ZP133 - 133MHz PowerQUICC MPU, 32-Bit | 357-BGA | NXP

The NXP (formerly Freescale / Motorola) MPC880ZP133 is a PowerQUICC communications processor featuring a 32-bit Power Architecture core running at 133 MHz, integrated into a 357-ball PBGA package measuring 25 mm x 25 mm. It belongs to the MPC8xx family of microprocessors and was designed for low-power, low-cost networking and communications applications, including DSL routers, Ethernet switches, and industrial control platforms. A PowerQUICC processor is an integrated communications microprocessor that combines a Power Architecture core (or 8xx core) with a separate RISC communications processor module (CPM), historically used in networking equipment for protocol handling, DMA, and serial interface management. The MPC8xx family sits in the broader taxonomy: microprocessor (MPU) -> embedded MPU -> communications processor -> PowerQUICC -> MPC8xx, and the 880 specifically targets cost-optimized networking designs with on-chip peripherals and a memory controller. Key features include a 32-bit 8xx core with 8 KB instruction cache and 8 KB data cache, 133 MHz core frequency, on-chip powerful memory controller, system functions, and integrated security. The part supports a 0C to 95C operating temperature range. The 357-PBGA package uses 1.27 mm ball pitch and is suitable for multilayer PCB designs with controlled impedance and matched-length routing for the external memory bus. The MPC880 architecture integrates the embedded 8xx core with the CPM RISC engine for low-latency communications handling. Internal register sets, dual-port RAM between the core and CPM, and a unified peripheral bus allow simultaneous execution of communications firmware and control-plane software. The 133 MHz clock, 32-bit data path, and 8 KB + 8 KB cache configuration deliver headroom for protocol stacks like PPP, Ethernet, and HDLC in legacy designs. Typical applications include DSL and ADSL CPE modems, Ethernet routers and hubs, telecommunications line cards, industrial control and serial communications boards, and legacy networking infrastructure. It is also used in embedded control systems where deterministic communications DMA is required. Design consideration: the 357-BGA package requires careful PCB layout, including via-in-pad or dog-bone fanouts, controlled-impedance traces for the external memory bus, and proper thermal relief under sustained loads. Confirm that the JTAG, reset, and PLL configuration match the datasheet reference design before board bring-up. This page synthesizes distributor pricing, drop-in MPC8xx-family alternatives, and design considerations not collected in the equivalent product brief, giving engineers a faster path to sourcing and second-source decisions for the MPC880ZP133.

Permintaan RFG Kontak
MPC880ZP66 - 66MHz 32-Bit PowerQUICC MPU | NXP
MPC880ZP66

MPC880ZP66 - 66MHz 32-Bit PowerQUICC MPU | NXP

The NXP Semiconductors MPC880ZP66 is a 66 MHz, 32-bit PowerQUICC communications microprocessor with one core, operating from a 3.3 V supply and housed in a 357-pin PBGA package measuring 25 x 25 mm. The MPC8xx device combines a Power Architecture processor core with communications-oriented integrated peripherals for embedded networking and industrial control systems. A PowerQUICC microprocessor is a system-on-chip processor designed around the Power Architecture instruction set and a communications processor architecture. Within the semiconductor hierarchy, it belongs to the microprocessor and embedded-processor class, then to 32-bit RISC processors, and finally to the broader integrated-circuit and embedded-computing categories. Its integrated communications peripherals reduce the component count required in routers, protocol converters, embedded gateways, and control systems. The verified specifications identify the MPC880ZP66 as an MPC8xx processor with one 32-bit core, a 66 MHz operating frequency, a 3.3 V supply, and a 357-PBGA package. The ZP order code is associated with tray packaging in the supplied hardware listing. Search results also identify the device with an operating range from 0 C to 95 C and describe the underlying MPC885/MPC880 hardware documentation. Its communications-oriented architecture makes it relevant to industrial networking, protocol conversion, embedded communications, and control applications where a dedicated processor is preferable to a general-purpose desktop-class CPU. The MPC880 family is associated with networking and communications products, while the integrated communications peripherals support efficient handling of data-transfer workloads and control traffic. The principal engineering consideration is legacy-board compatibility. A replacement must match the 357-ball PBGA footprint, ball assignments, core voltage, clock requirements, bus behavior, and peripheral configuration rather than merely sharing the 66 MHz operating frequency. The original MPC885/MPC880 hardware specifications should therefore be used to validate any substitute before production use. This page consolidates the verified distributor specifications, package details, documented comparison candidates, and practical replacement criteria. It distinguishes confirmed pin-compatible options from broad functional similarities and explicitly identifies electrical, lifecycle, and pricing details that require confirmation from authorized sources.

Permintaan RFG Kontak
MPC880ZP80 - PowerQUICC 32-Bit MPU, 80MHz, 357-PBGA | NXP
MPC880ZP80

MPC880ZP80 - PowerQUICC 32-Bit MPU, 80MHz, 357-PBGA | NXP

The NXP (formerly Freescale) MPC880ZP80 is a 32-bit PowerQUICC microprocessor in the MPC8xx family, integrating a PowerPC core with on-chip communications peripherals. Operating at 80 MHz, the device is housed in a 357-ball PBGA package (25x25 mm) and targets embedded telecom, networking, and industrial-control applications. An MPU (Microprocessor Unit) is a VLSI device that integrates a CPU core, memory controllers, and peripheral interfaces into a single chip. Within the broader taxonomy, the MPC880ZP80 sits at the intersection of: microprocessor -> embedded MPU -> communications processor -> PowerPC architecture -> CMOS IC. The PowerQUICC family historically served as the workhorse of PowerPC embedded designs before transitioning to more advanced Power Architecture derivatives. Key features of the MPC880ZP80 include a 32-bit PowerPC core, 80 MHz maximum core clock, dual 10/100 Mbps Ethernet MACs via the Fast Ethernet Controller (FEC), HDLC/serial peripherals, a USB 1.1 host/slave interface, memory controller supporting DRAM/Flash/SRAM, and an integrated system integration unit (SIU) with PCMCIA host bridging. The CMOS process delivers modest core power dissipation suitable for fanless embedded chassis, while the 357-PBGA package provides generous signal access for high-bandwidth external buses. Architecturally, the MPC880 combines an integer execution unit, separate load/store and branch units, an 8-entry instruction queue, and 4 KB of instruction and 4 KB of data caches. A CPM (Communications Processor Module) offloads DMA-driven I/O from the core, which is why the family earned the "PowerQUICC" telecom-grade designation. Hardware block diagrams in the datasheet detail the CPM, FEC, USB, SCC, SMC, SPI, I2C, and PCMCIA sub-blocks. Typical applications include SOHO routers, ADSL/Cable modem gateways, industrial serial-bridge controllers, RAID/SAN controllers, and telecom edge equipment. The integrated dual Ethernet MACs and CPM-driven HDLC make it especially attractive for legacy WAN-interface designs requiring deterministic protocol handling. When designing with this part, pay close attention to power sequencing (3.3 V I/O and 1.8 V core), DDR/SDRAM clock-tree length matching, and PBGA PCB land-pattern thermals. The datasheet's Hardware Specifications chapter specifies DC/AC characteristics and must be consulted during board bring-up. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone, helping engineers evaluate second-source options for this mature PowerQUICC part.

Permintaan RFG Kontak
MPC885CVR133 - PowerQUICC 32-Bit MPU, 133MHz, 357-PBGA | NXP
MPC885CVR133

MPC885CVR133 - PowerQUICC 32-Bit MPU, 133MHz, 357-PBGA | NXP

The NXP (formerly Freescale) MPC885CVR133 is a PowerQUICC communications processor built on Power Architecture technology, integrating a 32-bit MPC8xx core running at 133 MHz (delivering up to 176 MIPS) within a 357-ball PBGA package measuring 25x25 mm. It combines a high-performance embedded CPU with peripheral subsystems optimized for networking, WAN/LAN access, and industrial control applications. What is a PowerQUICC communications processor? A PowerQUICC (pronounced "power-quick") is an integrated communications processor family from NXP/Freescale that embeds a Power Architecture CPU core alongside communications-engineering modules - typically including a CPM (Communications Processor Module), ATM and Ethernet controllers, HDLC channels, and time-slot assigners - to offload protocol processing from the main core. PowerQUICC devices sit within the broader taxonomy of embedded processors -> microprocessors (MPU) -> 32-bit MPU -> communications processor -> PowerQUICC family, and are commonly classified under power management and embedded system design. Key features of the MPC885CVR133 include a 133 MHz core clock, 32-bit data bus, integrated communications peripheral module, dual 10/100 Mbps Ethernet MAC, dual UART, I2C, SPI, PCMCIA interface, and 16-bit memory controller supporting SDRAM, SRAM, and ROM. The device operates from a -40C to +100C industrial temperature range and is supplied in a 357-ball Plastic BGA (PBGA) package. Architecturally, the MPC885CVR133 combines the MPC8xx core with a separate RISC-based CPM that handles serial and networking protocols in hardware, freeing the main core for application-layer processing. This dual-processor architecture delivers high sustained throughput on telecom and datacom workloads while keeping the part within a single-chip BOM. Typical applications include SOHO and SMB routers, DSL modems, wireless LAN access points, industrial gateways, VoIP media gateways, and embedded serial communications controllers. The wide peripheral integration makes it suitable for legacy telecom infrastructure as well as industrial control nodes. When laying out a board for the MPC885CVR133, designers must pay close attention to the 357-ball PBGA fanout, provide solid ground and power planes, and ensure the 133 MHz core clock is routed with controlled impedance and minimal skew. Decoupling bulk and ceramic capacitors must be placed close to each power/ball to suppress switching noise from the CPM. This page synthesizes distributor pricing, drop-in same-family alternatives, and practical design notes that go beyond what the manufacturer datasheet alone provides.

Permintaan RFG Kontak
MPC885CVR133-FR - PowerQUICC 133MHz 32-Bit MPU | NXP
MPC885CVR133-FR

MPC885CVR133-FR - PowerQUICC 133MHz 32-Bit MPU | NXP

The NXP MPC885CVR133-FR is a PowerQUICC communications processor built on Power Architecture technology, integrating a 133MHz 32-bit MPC8xx core with on-chip peripherals for networking and embedded communications. The device is offered in a 357-ball PBGA package (25 mm x 25 mm) and delivers up to 176 MIPS of integer performance. A PowerQUICC processor is a family of integrated communications-oriented microprocessors that combine a Power Architecture CPU core with system integration units such as memory controllers, peripheral interfaces, and dedicated communications engine blocks. The MPC885 sits within the broader taxonomy of Power Architecture microprocessor -> embedded MPU -> communications processor -> PowerQUICC family -> NXP MPC8xx sub-family, and is widely used in routers, DSLAM line cards, industrial control and legacy telecom equipment where integrated peripherals reduce BOM cost. Key features of the MPC885CVR133-FR include 133 MHz core frequency, 32-bit data path, integrated CPM (Communications Processor Module) supporting HDLC, Ethernet, UART, and SPI channels, 16KB instruction cache and 8KB data cache, and a 32-bit memory controller with DRAM support. The part number suffix -FR denotes a lead-free / RoHS-compliant PBGA variant, suitable for modern assembly lines. The architecture pairs the PowerPC core with a separate RISC-based CPM that handles DMA and serial protocol processing independently of the core, offloading network traffic and freeing the CPU for application-layer processing. This dual-engine design is the principal engineering value of the PowerQUICC family and remains relevant in long-lifecycle industrial designs. Typical applications include SOHO routers, ISDN terminal adapters, industrial Ethernet gateways, legacy telecommunications line cards, and embedded control boards requiring integrated serial channels. The wide peripheral set reduces external chip count versus competing solutions that require a separate MAC or serial controller. A practical design consideration: power dissipation scales roughly with clock frequency, so 133 MHz operation draws more current than the 66 MHz or 80 MHz variants in the MPC885 family. For battery-backed or thermally constrained enclosures, evaluate the MPC885CVR80 or MPC880 family before committing to the 133 MHz SKU. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in a single manufacturer datasheet, with all data traceable to the cited sources.

Permintaan RFG Kontak
MPC885CVR66-FR - 66MHz PowerQUICC MPU, 357-PBGA | NXP
MPC885CVR66-FR

MPC885CVR66-FR - 66MHz PowerQUICC MPU, 357-PBGA | NXP

The NXP MPC885CVR66-FR is a PowerQUICC communications processor built on Power Architecture technology, integrating an MPC8xx 32-bit core running at 66 MHz (delivering 87 MIPS per the manufacturer data) into a 357-ball PBGA (25x25 mm) package. It supports a 3.3 V supply domain with an internal core voltage of 1.9 V, and is qualified for an extended -40 C to +100 C operating range targeting industrial and communications infrastructure. Background: A PowerQUICC (PowerPC QUICC) MPU is an embedded microprocessor that combines a Power Architecture CPU core with on-chip peripherals originally designed for networking, telecom, and industrial control. The MPC8xx family pioneered the integration of a communications processor module (CPM) with a general-purpose core, enabling a single chip to handle both protocol processing and control-plane tasks. The MPC885 sits within the broader taxonomy: microprocessor -> embedded MPU -> PowerQUICC family -> communications processor -> Power Architecture device -> semiconductor. Key differentiating features of the MPC885CVR66-FR include the integrated CPM supporting multiple serial channels (FCCs, SCCs, SMC, SPI, I2C), a 32-bit RISC communications engine, dual 10/100 Ethernet MAC support via the FCCs, a 32-channel DMA controller, and memory control for SDRAM, SRAM, EPROM, and flash. The integrated peripherals eliminate external protocol bridges and reduce BOM cost in router, switch, and access-multiplexer designs. From an architectural perspective, the MPC885CVR66-FR uses a 0.18 micrometer process and separates the 3.3 V I/O supply from the 1.9 V core supply, allowing low core power dissipation while maintaining 5 V-tolerant I/O on selected interfaces. The CPM offloads serial DMA, HDLC/PPP framing, and ATM SAR work from the core, freeing CPU cycles for routing and management-plane software. Typical applications include WAN access routers, ISDN terminal adapters, xDSL modems and CPE, industrial serial-to-Ethernet gateways, and legacy telecom control boards. The combination of 87 MIPS core performance and integrated communications controllers makes it suitable for low-to-mid throughput edge devices where a single-chip solution lowers cost and board area. When designing with this part, ensure the 1.9 V core regulator is sequenced correctly relative to the 3.3 V I/O rail, observe the 357-ball PBGA ballout for power/ground ball distribution to maintain signal integrity, and verify that the CPM firmware matches the silicon revision. Refer to the manufacturer hardware specifications for the exact thermal design current per supply domain. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes that extend beyond the manufacturer datasheet.

Permintaan RFG Kontak
MPC885CZP133 - 133MHz PowerQUICC MPU, 357-PBGA | NXP
MPC885CZP133

MPC885CZP133 - 133MHz PowerQUICC MPU, 357-PBGA | NXP

The NXP MPC885CZP133 is a 133 MHz 32-bit PowerQUICC microprocessor (MPU) from the MPC8xx family, integrating an embedded Power Architecture core with a dedicated communications processor module (CPM) in a 357-ball PBGA package (25x25 mm). The part delivers up to 133 MHz core frequency with 16 KB unified cache, supports a 1.7V to 1.9V core supply, and is qualified over the -40C to +100C industrial temperature range, targeting embedded networking and telecom equipment. A PowerQUICC (Power Architecture with Communications) processor is a class of integrated microprocessor that combines a general-purpose CPU core with a separate RISC-based communications engine on a single die. It sits within the broader hierarchy: microprocessor -> embedded MPU -> PowerQUICC -> communications processor -> Power Architecture technology. This integration reduces system bill-of-materials and enables deterministic handling of multiple serial channels simultaneously, which is essential in routers, switches, and access multiplexers where the CPU alone cannot service the sustained interrupt load of TDM and packet traffic. Key differentiating features include the on-chip CPM with separate RISC engine, dual 8 KB instruction/data caches, a powerful memory controller supporting DRAM, SRAM, Flash, and PCMCIA, integrated security engine, and multiple serial communication controllers (SCCs, SMCs) for HDLC/SDLC, UART, BISYNC, SPI, and I2C. The MPC885 is the superset device of the MPC880/MPC885 family, with the 'CZ' suffix denoting the 357-PBGA package and '133' indicating the 133 MHz core speed grade. The architecture integrates the PowerPC 8xx core with a 32-bit data path, hardware multiply/divide, and four instruction units. The CPM operates at a configurable baud-rate generator clock and supports up to eight serial channels concurrently, offloading the core. Internal 32-bit address bus, 32-bit data bus, and dedicated PCMCIA/USB interfaces make the device suitable for integrated access platforms and customer-premises equipment. Typical applications include networked routers, DSLAM line cards, ISDN terminal adapters, T1/E1 multiplexers, and industrial control with serial-intensive I/O. The wide peripheral set also fits customer-premises gateways, set-top boxes, and embedded Linux appliances that require deterministic serial handling. When designing with this part, ensure a stable 1.8V supply with bulk decoupling near the BGA, follow NXP AN2130 PCB layout guidelines for 357-PBGA fan-out, and verify JTAG access before board bring-up. The 357-BGA package demands at least four routing layers; plan stack-up and via-in-pad early. This page consolidates distributor pricing, drop-in alternatives in the same 357-PBGA footprint, and practical design notes not assembled in any single manufacturer document.

Permintaan RFG Kontak
MPC885CZP66 - 66MHz PowerQUICC MPU, 32-Bit, 357-BGA | NXP
MPC885CZP66

MPC885CZP66 - 66MHz PowerQUICC MPU, 32-Bit, 357-BGA | NXP

The NXP Semiconductors MPC885CZP66 is a PowerQUICC communications processor built on a 32-bit Power Architecture core, operating at 66 MHz with a 0.18 micrometer CMOS process and packaged in a 357-pin PBGA measuring 25 x 25 mm. It integrates a 32-bit RISC CPU core, a flexible system interface unit, and a communications processor module (CPM) tailored for networking, telecom, and embedded control designs. The device is qualified for the industrial -40C to +100C operating range and supports a 3.3 V I/O supply typical of the MPC8xx family. A microprocessor (MPU) is a single-chip processor that integrates a central processing unit, cache, memory controller, and peripheral interfaces onto a single die. The PowerQUICC family sits within the broader taxonomy of embedded processors, bridging traditional microcontrollers and high-end application processors. The MPC8xx series specifically targets communications-intensive applications where deterministic I/O handling and integrated peripheral channels reduce total system cost and board complexity. Key features include a 66 MHz core clock, a 32-bit data bus, 1 CPU core, a 357-ball grid array surface-mount package, MSL Level 3 moisture sensitivity, and integrated communications peripherals. The 25 x 25 mm PBGA offers robust thermal dissipation through bottom-side balls, while the 0.18 micrometer process balances performance with low static power consumption suitable for always-on infrastructure. The CPM offloads communication tasks from the core, including HDLC, UART, and Ethernet MAC support, allowing deterministic wire-speed handling without CPU intervention. Internal dual-port RAM and configurable serial channels make the device well suited for legacy router, bridge, and industrial gateway designs that must maintain pin-compatible software across product generations. Typical applications include industrial routers, telecom DSLAM line cards, factory automation controllers, point-of-sale terminals, and legacy protocol converters. The wide industrial temperature range also makes it suitable for outdoor or uncontrolled-environment embedded systems requiring long-life silicon. When designing with this device, allocate adequate PCB area for the 357-ball BGA fanout and ensure controlled-impedance routing for memory and CPM interfaces. A multi-layer PCB with dedicated power and ground planes is strongly recommended to maintain signal integrity at 66 MHz core speeds. This page synthesizes distributor pricing, verified same-brand alternatives, and engineering trade-off notes not found in the standalone datasheet, helping engineers and procurement teams evaluate the MPC885CZP66 against current alternatives.

Permintaan RFG Kontak
MPC885VR133 - 133MHz PowerQUICC MPU 32-Bit | NXP | Networking
MPC885VR133

MPC885VR133 - 133MHz PowerQUICC MPU 32-Bit | NXP | Networking

The NXP MPC885VR133 is a 133 MHz 32-bit PowerQUICC communications processor integrating an embedded MPC8xx core with a separate RISC-based Communications Processor Module (CPM), delivering approximately 176 MIPS for networking and telecom systems. Housed in a 357-ball PBGA (25x25 mm) package, it provides 8 KB instruction cache, 8 KB data cache, a powerful memory controller, and on-chip security features for industrial operating temperature (0 to +95C). What is a PowerQUICC processor? A PowerQUICC (pronounced "powerquick") is a family of communications processors built on Power Architecture technology that combines a general-purpose embedded CPU with a separate, dedicated RISC engine - the CPM - to handle low-level networking and serial communications tasks. In the system hierarchy, the MPC885 family sits at the intersection of MPU (microprocessor unit), embedded processor, and communications controller, superseding older Motorola 68k designs for routers, switches, and industrial control. The CPM off-loads DMA, HDLC, ATM, Ethernet, USB, and serial protocols from the host CPU, freeing the core for application and management-plane code. Key features include CPU frequencies of 66/80/133 MHz, 32-bit data bus width, integrated peripheral interfaces (Ethernet, USB, serial, I2C, SPI), 4.9W typical power dissipation, and parallel I/O via the 357-PBGA footprint. The MPC885VR133 variant excludes the LCD controller present on the MPC885 (the "V" suffix denotes reduced peripheral set versus "C" full-featured; the "R" denotes tape-and-reel packaging). Architecturally, the device combines the MPC8xx core with the CPM, two independently programmable 8 KB caches, dual 10/100 Ethernet MACs, USB 1.1, and an industrial memory controller supporting DRAM, SDRAM, ROM/Flash, and EDO. The on-chip security engine supports DES, 3DES, AES, MD-5, and SHA-1 for VPN/IPsec offload. Typical applications include industrial routers, telecom equipment, network switches, and embedded communications controllers. The MPC885VR133 suits designs requiring low-power operation, integrated Ethernet switching, and cryptographic offload. Consider the MPC880VR133 (without crypto) or MPC885CVR133 (with LCD controller) for variants in the same 357-PBGA footprint. When designing in the MPC885VR133, ensure the power supply sequencing meets the core/IO rail requirements and place decoupling capacitors close to the PBGA balls. The 357-BGA package demands multilayer PCB with controlled-impedance traces; consider thermal vias below the die for continuous high-duty operation. This page synthesizes distributor pricing, lifecycle status, drop-in alternatives from the same PowerQUICC family, and practical design notes not found in the manufacturer datasheet. Pricing and availability reference current date 2026-10-16.

Permintaan RFG Kontak
MPC885VR66 - 66MHz 32-Bit PowerQUICC MPU | NXP Semiconductors
MPC885VR66

MPC885VR66 - 66MHz 32-Bit PowerQUICC MPU | NXP Semiconductors

The NXP Semiconductors MPC885VR66 is a 66 MHz, single-core, 32-bit PowerQUICC communications microprocessor in a 357-pin plastic BGA package measuring 25 x 25 mm. According to the NXP product page, it operates from 0°C to 95°C and is identified as an end-of-life product. Its 3.3 V supply, 66 MHz clock, and advertised 87 MIPS performance place it in the legacy MPC8xx embedded communications processor family. A microprocessor is a programmable semiconductor system containing a central processing unit, memory interfaces, communications controllers, and associated peripherals. Within the broader semiconductor hierarchy, the MPC885VR66 belongs to the microprocessor and embedded processor category, and more specifically to the PowerQUICC communications-processor family. Such devices combine a general-purpose processing core with hardware designed for telecommunications, networking, and industrial data-transfer applications. Key features verified for the MPC885VR66 include a 32-bit RISC-compatible Power Architecture, one processor core, a 66 MHz operating frequency, 3.3 V operation, and 87 MIPS advertised performance. The device is supplied in a 357-PBGA package. Distributor listings also identify the package as 357-BBGA in some records, reflecting differing package-family terminology, while the DigiKey listing specifies 357-PBGA (25 x 25 mm). Lead-free and RoHS-compliant status are reported by the DigChip product record. The MPC8xx architecture is associated with communications-oriented system design because it combines processing capability with dedicated communication functions. A 66 MHz clock and 87 MIPS throughput provide useful compute performance for embedded networking, control, protocol handling, and legacy industrial equipment. The 357-ball package also exposes a large number of external interfaces, making board-level signal integrity, power distribution, and thermal design especially important. Typical uses include embedded communications controllers, industrial networking equipment, protocol-conversion systems, telecommunications support hardware, and legacy industrial-control platforms. Because the NXP product page labels the MPC885VR66 end of life, engineers should preserve the original part when maintaining an existing design, qualify any authorized supply carefully, and evaluate a redesign before starting a new high-volume platform. A key design consideration is that the 357-BGA footprint is not interchangeable with a smaller package or a different pin arrangement. Any replacement must use the same 357-ball land pattern, confirm electrical compatibility, verify peripheral and memory-interface requirements, and undergo board-level validation. This page consolidates verified distributor lifecycle, package, clock, voltage, and pricing information while clearly identifying unavailable technical data rather than estimating it.

Permintaan RFG Kontak
MPC885VR80 - 80MHz PowerQUICC MPU | NXP Semiconductors
MPC885VR80

MPC885VR80 - 80MHz PowerQUICC MPU | NXP Semiconductors

The NXP Semiconductors MPC885VR80 is a 32-bit Power Architecture communications processor from the PowerQUICC MPC8xx family, integrating a CPU core with on-chip peripherals for networking and communications applications. The part operates at 80 MHz core frequency, contains an integrated communications processor module (CPM), and is housed in a 357-ball PBGA (25x25 mm) package. It belongs to NXP's PowerQUICC I family that combined a PowerPC core with dedicated serial communications hardware, targeting routers, switches, and industrial control systems. The PowerQUICC MPC8xx family, part of the broader microprocessor (MPU) product hierarchy (microprocessor > microcontroller > integrated circuit), evolved from Motorola's original PowerPC-based embedded processors and was widely adopted in the late 1990s and 2000s. The 'VR' suffix denotes an extended temperature grade variant, and the '80' suffix specifies the maximum CPU core clock of 80 MHz. According to the NXP product page, this device is now discontinued, with formal End-of-Life documentation posted by NXP. Key features include a 32-bit Power Architecture core with 4K instruction cache and 4K data cache, dual Fast Ethernet controllers (10/100 Mbps), an integrated communications processor module with multiple serial channels (HDLC/SDLC, UART, SCC, SMC), USB support, and external memory controllers for SDRAM, SRAM, EPROM, and Flash. The device operates from a maximum supply voltage of 1.9 V core and supports industrial networking protocols. The architecture combines a general-purpose PowerPC core with dedicated CPM hardware that offloads communications tasks, allowing the core to handle application-layer processing. This dual-processor design maximizes throughput for packet processing while keeping the core free for routing table management and protocol stack execution. Per the manufacturer datasheet, on-chip peripherals include 4 serial communication controllers (SCC), 2 serial management controllers (SMC), 1 serial peripheral interface (SPI), 1 I2C interface, and a USB controller. Typical applications include SOHO routers, ADSL modems with integrated router functionality, industrial Ethernet gateways, protocol converters, factory automation controllers, and legacy telecom equipment. The combination of CPM offload and on-chip Ethernet made the MPC885VR80 a popular choice for embedded networking in the late 1990s and early 2000s, when small-office routers transitioned from x86 designs to dedicated network processors. When designing with this device, engineers must consider the large 357-ball PBGA package requires careful PCB layout with multiple ground and power balls for power delivery. The 1.9 V core supply typically requires a separate DC-DC regulator alongside the 3.3 V I/O supply. This page synthesizes distributor pricing, available inventory from authorized and aftermarket sources, and practical design notes not consolidated in the manufacturer datasheet, supporting both ongoing maintenance of legacy designs and end-of-life migration planning.

Permintaan RFG Kontak
MPC885ZP133 - PowerQUICC 32-Bit 133MHz MPU | NXP | 357-PBGA
MPC885ZP133

MPC885ZP133 - PowerQUICC 32-Bit 133MHz MPU | NXP | 357-PBGA

The NXP MPC885ZP133 is a 32-bit PowerQUICC microprocessor built on Power Architecture technology, operating at up to 133 MHz and housed in a 357-ball PBGA (25 mm × 25 mm) package. Marketed as a communications processor for embedded networking and telecom equipment, it integrates a single MPC8xx core with on-chip peripherals tailored for WAN, LAN, and serial-backplane routing. The PowerQUICC device family sits at the intersection of microprocessors (MPU) and microcontrollers (MCU). A PowerQUICC chip combines a PowerPC-class integer core with dedicated communications-engine peripherals (ATM, HDLC, Ethernet, USB, serial interfaces), eliminating the need for a separate media-access controller. Within the broader taxonomy, it is classified as an embedded MPU under Integrated Circuits, with a sibling hierarchy of communications processors -> networking SoCs -> embedded processors -> semiconductors. Key features include a 32-bit core running at 133 MHz, integrated 10/100 Mbps Fast Ethernet MAC, dual HDLC/ATM supporting channels, USB (full-speed) and multiple serial interfaces, and a 1.9 V core / 3.3 V I/O dual-rail supply scheme. The integrated peripherals offload the CPU from protocol framing tasks, allowing deterministic throughput at line rate. The 357-PBGA plastic-ball-grid-array package exposes a wide parallel external bus for SDRAM and Flash expansions. Typical applications include small-business routers, ISDN terminal adapters, ADSL/Cable modems, industrial serial-to-Ethernet gateways, and networked control systems. Operating temperature range is 0 °C to 95 °C. A design consideration: engineers who need determinism under heavy protocol load should review the reference manual's CPM (Communications Processor Module) section because the offload engine, not the core's MIPS, gates most dataplane work. This page synthesizes datasheet specifications, an analysis of pin-compatible alternatives, and pragmatic design notes not found in NXP's official hardware-specifications document.

Permintaan RFG Kontak
MPC885ZP66 - 66MHz PowerQUICC MPU 357-PBGA | NXP
MPC885ZP66

MPC885ZP66 - 66MHz PowerQUICC MPU 357-PBGA | NXP

The NXP (formerly Freescale) MPC885ZP66 is a PowerQUICC communications microprocessor integrating a 32-bit Power Architecture core with on-chip peripherals, packaged in a 357-ball PBGA (25x25 mm). It runs at up to 66 MHz, targets networking and telecom equipment, and operates over a 0 to 95 C commercial temperature range. A microprocessor (MPU) is the central processing unit of an embedded system, executing instructions fetched from memory and coordinating system peripherals. The MPC885 sits inside the MPU -> embedded processor -> microcontroller/SoC -> semiconductor taxonomy, and is positioned as a low-power communications SoC with integrated MAC, UART, I2C, SPI, USB, and HDLC/ATM controllers that historically offloaded the CPU in routers, DSLAMs, and PBX systems. Key specifications include a single 32-bit core running at 66 MHz, 4 KB instruction and data caches, integrated Ethernet MACs, a 32-bit PCI bridge, and a memory controller supporting SDRAM, DRAM, SRAM, Flash, and ROM. The 357-PBGA package supplies the high I/O count required for the parallel system bus, two 10/100 MII Ethernet interfaces, USB, and serial channels. Architecturally the device combines the Power Architecture CPU with the CPM (Communications Processor Module), a RISC engine that handles DMA and serial protocols independently of the core, freeing CPU bandwidth for routing and protocol-stack work. Power is typically supplied at 3.3 V I/O with a 1.8 V core rail, and the part supports several low-power modes for energy-conscious designs. Typical uses include industrial routers, ISDN/DSL gateways, two-port 10/100 Ethernet switches, embedded firewalls, PBX control cards, and legacy 32-bit serial-control subsystems. The wide peripheral integration makes it a fit for compact, BOM-conscious designs. When designing in, plan bypass capacitors for both core and I/O rails within 25 mm of the balls, route the 32-bit system bus with impedance control, and allocate adequate thermal copper to keep the junction under the 95 C limit. Refer to the MPC885 Hardware Specifications for power-up sequencing. This page combines NXP datasheet parameters, real distributor availability, drop-in alternatives in the same 357-PBGA footprint, and practical design notes not found in the marketing summary.

Permintaan RFG Kontak
MPC885ZP80 - PowerQUICC 32-Bit MPU, 80MHz, 357-BGA | NXP
MPC885ZP80

MPC885ZP80 - PowerQUICC 32-Bit MPU, 80MHz, 357-BGA | NXP

The NXP MPC885ZP80 is a PowerQUICC communications processor built on Power Architecture technology, integrating an MPC8xx core at 80 MHz with a 3.3 V supply in a 357-ball PBGA package. It combines a 32-bit RISC core with on-chip integrated peripherals for networking and embedded communications workloads, and is specified for the 0 °C to 95 °C operating range. A PowerQUICC processor is a category of integrated communications processor that pairs a Power Architecture CPU with peripheral subsystems optimized for WAN, LAN, telecom, and industrial control. In the broader taxonomy it sits between a general-purpose microcontroller (MCU) and a high-performance applications processor, filling the niche where deterministic real-time response plus on-chip serial protocols are required without paying the cost and power of an applications SoC. The MPC885 belongs to the PowerQUICC I family, distinguished from PowerQUICC II by its core architecture and peripheral mix. Key features include an 80 MHz 32-bit Power Architecture core, integrated communications processor module (CPM) supporting serial protocols, 3.3 V single-supply operation, 357-ball PBGA package (25 x 25 mm), and the legacy industrial operating range of 0 °C to 95 °C. The CPM offloads DMA, HDLC, and serial-channel handling from the core, freeing the CPU for higher-layer protocol and application logic. Architecturally, the MPC885ZP80 implements separate instruction and data caches, a memory management unit, and the CPM that drives multiple SCCs, SMCs, and an SPI/I2C controller. The 0.18 µm CMOS process and integrated PLL allow the 3.3 V I/O while internally scaling the core. Power dissipation is bounded by the package thermal resistance and the activity of the CPM-driven serial channels. Typical applications include low-end routers, DSL and cable modems, industrial serial protocol bridges, set-top box controllers, and embedded telecom line cards. The 357-PBGA footprint is shared across the MPC885 family, enabling PCB reuse across speed, temperature, and feature variants. Designers value the deterministic CPM interrupt latency for real-time serial traffic. When designing with this part, allocate the full PBGA breakout with at least 4 inner power/ground planes for the 357-ball array, and follow NXP's reference design for power decoupling. The legacy 0-95 °C temperature window means the part is NOT suited for extended-industrial or automotive environments - choose the MPC885CVR80 or a PowerQUICC II derivative for -40 °C to +105 °C applications. This page synthesizes distributor pricing, drop-in alternatives within the 357-PBGA footprint, and practical design notes not found in the manufacturer datasheet.

Permintaan RFG Kontak
MPCZ565MVR56 - 32-bit Power Arch MCU, 1MB Flash, 40MHz | NXP
MPCZ565MVR56

MPCZ565MVR56 - 32-bit Power Arch MCU, 1MB Flash, 40MHz | NXP

The NXP MPCZ565MVR56 is a 32-bit microcontroller from the MPC500 family built on the Power Architecture instruction set, integrating 1 MB of on-chip flash memory, a floating-point unit, and an advanced automotive-grade peripheral set. It operates at up to 40 MHz, supports -40C to +125C junction temperatures, and is housed in a 388-ball PBGA package. The Z56 device code denotes a specific Flash/SRAM configuration of the MPC565 die. A microcontroller (MCU) is a single-chip computation engine that integrates a CPU core, volatile and non-volatile memory, and programmable peripherals. It sits below the microprocessor (MPU) in the computing hierarchy but above general-purpose logic ICs. Within the Power Architecture family, the MPC500 series targets real-time automotive control where deterministic interrupt latency, on-chip flash, and automotive temperature grades are mandatory. The MPC565 specifically adds a hardware floating-point unit, supporting high-throughput signal processing in powertrain and chassis domains. Key features include 1 MB of embedded Flash, a unified 64 KB SRAM, a floating-point unit compliant with IEEE 754, dual CAN 2.0B controllers, an enhanced modular I/O subsystem, and a 32-channel eMIOS timer for PWM generation. The device also integrates a queued analog-to-digital converter (QADC) with 40 channels and a Time Processing Unit (TPU) for complex timing without CPU intervention. The MPCZ565MVR56 is fabricated in a 0.25-micron CMOS process and includes a JTAG/OnCE debug port, a Background Debug Mode (BDM), and a system integration unit with configurable chip-selects. Its automotive-grade temperature rating and ECC-protected flash make it qualified for engine control units, anti-lock brake systems, and electronic stability control modules where functional safety is critical. Typical applications include engine management ECUs, transmission controllers, body controllers, and industrial motion control. The MPC565's combination of FPU, hardware timers, and automotive qualification makes it suitable for any closed-loop control application requiring 32-bit floating-point math. When designing with this MCU, ensure your code uses the Power Architecture EABI and respects the MPC565 memory map. Decoupling and trace layout are critical at 40 MHz; follow NXP application note AN2543 for EMC layout. Code written for the MPC555 is generally compatible, simplifying migration. This page synthesizes distributor pricing from DigiKey and Rochester Electronics, drop-in alternatives sourced from the NXP MPC500 and PowerPC MPC5xx families, and practical design notes not found in the standalone manufacturer datasheet.

Permintaan RFG Kontak