Mikrokontroler

Produk (20.000+)

MPXD1010VLQ64 - 64MHz 32-bit 1MB MCU | NXP
MPXD1010VLQ64

MPXD1010VLQ64 - 64MHz 32-bit 1MB MCU | NXP

The NXP Semiconductors MPXD1010VLQ64 is a 32-bit e200z0h microcontroller operating at 64 MHz, with 1 MB of flash memory and 48 KB of RAM, housed in a 144-LQFP 20 mm × 20 mm package. It provides 105 I/O pins and is identified as an industrial-temperature-grade component by distributor records. The verified distributor information supports its use in embedded control, industrial equipment, communications, and real-time processing systems. A microcontroller is a semiconductor device that integrates a processor core, program memory, data memory, peripherals, and I/O into one compact component. The MPXD1010VLQ64 belongs to the embedded microcontroller hierarchy and combines deterministic control processing with substantial onboard storage. Its 1 MB flash supports firmware and application code, while 48 KB of RAM supports working data, stack space, and intermediate calculations. The principal verified parameters are a 64 MHz maximum operating frequency, 32-bit architecture, 1 MB program memory, 48 KB RAM, 105 I/O pins, and a 144-LQFP package. The suffix VLQ64 identifies the 64 MHz configuration, while Q64 denotes the 144-pin LQFP package variant. Distributor listings identify the device as an e200z0h PX microcontroller, which is useful for software and peripheral planning when supported by the manufacturer documentation. The 144-LQFP package provides a high pin count for systems requiring multiple external interfaces and control signals. Compared with smaller microcontroller packages, it offers more I/O capacity but requires careful PCB routing and adequate thermal consideration. The 20 mm × 20 mm package is a surface-mount gull-wing format intended for automated assembly and high-density embedded systems. Typical applications include industrial automation controllers, communications equipment, motor and machine control, data acquisition systems, and embedded gateways. The available verified data does not specify individual peripheral functions, supply voltage, memory technology beyond the listed capacities, or detailed timing characteristics; those values should be confirmed in the NXP datasheet before final design release. Designers should verify the exact pinout, power requirements, clock configuration, peripheral multiplexing, and programming requirements from the official NXP documentation. The 105 I/O count is a package-level resource claim, while the usable I/O count may be lower when pins are reserved for power, ground, clock, reset, debug, and other fixed functions. PCB layouts should preserve the manufacturer-recommended decoupling and exposed thermal considerations even when those values are not published in the supplied search data. This product record combines verified distributor specifications, package information, sourcing links, and engineering-oriented selection guidance. It is intended to support initial component identification and comparison while clearly separating verified facts from parameters that still require confirmation from the manufacturer datasheet.

Permintaan RFG Kontak
MPXD1010VLU64 - 32-Bit 64MHz 1MB Flash MCU | NXP
MPXD1010VLU64

MPXD1010VLU64 - 32-Bit 64MHz 1MB Flash MCU | NXP

The NXP MPXD1010VLU64 is a 32-bit e200z0h Power Architecture microcontroller operating at 64 MHz, with 1 MB of flash memory, 48 KB of RAM, and 133 I/O pins in a 176-LQFP package. It is designed for entry-level display solutions requiring embedded control, connectivity, and real-time peripheral integration. A microcontroller is a programmable system-on-chip that executes firmware, manages digital inputs and outputs, and coordinates memories, communication interfaces, timers, and other peripherals. The e200z0h core places the MPXD1010VLU64 in the 32-bit embedded-controller segment, where deterministic control and communication throughput are more important than the power profile of a low-cost 8-bit device. The verified specifications identify 1 MB (1M x 8) program flash, 48 KB (48K x 8) RAM, a 64 MHz operating frequency, 133 I/O pins, and connectivity including CANbus, I²C, LINbus, SCI, SPI, and UART/USART. The listed peripheral set also includes DMA, LCD, power-on reset, PWM, and a watchdog timer, supporting display controllers, automotive or industrial communications, and general embedded control systems. The package is a 176-LQFP in a 24 mm x 24 mm gull-wing format. Its large pin count exposes substantially more signal and peripheral resources than a small microcontroller package, which is useful for systems combining display interfaces, external memory, communication buses, and control signals. The exact electrical limits, memory map, pin names, and timing values should be confirmed in the manufacturer datasheet before layout or firmware release. Typical applications include entry-level display systems, industrial control panels, communication gateways, CAN-based equipment, and embedded systems requiring multiple serial interfaces. Because lifecycle information is reported as obsolete in one verified source, engineers should verify current sourcing, supported revisions, and any approved migration path before new production designs. A key design consideration is to match the MCU's power, clock, peripheral, and package requirements to the existing PCB. The 176-LQFP footprint has fine-pitch leads and requires careful routing, thermal planning, and assembly inspection; do not substitute a different package without a documented footprint and pinout comparison. This page consolidates the verified distributor specifications, lifecycle warning, package details, and replacement limitations for engineers evaluating the MPXD1010VLU64. Because the available cross-reference results do not verify five genuine same-package pin-to-pin alternatives, this page does not invent drop-in replacements.

Permintaan RFG Kontak
MPXN2020VMG116 - 116MHz 32-Bit 2MB MCU | NXP | Gateway
MPXN2020VMG116

MPXN2020VMG116 - 116MHz 32-Bit 2MB MCU | NXP | Gateway

The NXP Semiconductors MPXN2020VMG116 is a 32-bit e200z650 Power Architecture microcontroller operating at 116 MHz, with 2 MB of flash memory and a 208-pin MAPBGA package measuring 17 x 17 mm. It is positioned for industrial embedded control applications requiring substantial embedded flash, a high pin count, and integrated gateway-oriented connectivity capabilities. A microcontroller is a programmable system-on-chip that integrates a processor core, nonvolatile program memory, data memory, and peripherals into one component. The e200z650 core places MPXN2020VMG116 in the 32-bit embedded microcontroller hierarchy, where deterministic control and extensive software support are more important than the energy profile of a low-power microcontroller. Its 208-ball package supports dense mixed-signal and communication-oriented board layouts. The verified product data identifies a 116 MHz operating frequency, 2 MB flash organized as 2M x 8, and an industrial temperature grade. One distributor also lists 592 KB of memory, but the supplied data does not explain whether that figure represents RAM, another memory resource, or a device variant. Consequently, the value is reported separately and should be confirmed against the manufacturer documentation before design allocation. MPXN2020VMG116 is suitable for industrial gateways, networked embedded controllers, communications equipment, and compact control platforms that benefit from a 116 MHz embedded processor and 2 MB program-memory footprint. Its large MAPBGA package requires multilayer PCB design, careful escape routing, and assembly-process qualification, making it better suited to sophisticated equipment than simple low-cost prototypes. Engineers should confirm all pin multiplexing, power rails, clock requirements, memory interfaces, and ball assignments from the official NXP datasheet before schematic capture. Because no manufacturer datasheet URL or complete pinout was supplied in the verified data, this page does not infer electrical limits, peripheral assignments, or package-ball functions. Procurement users should also confirm current lifecycle and stock status directly with the manufacturer or an authorized distributor. This page consolidates verified distributor specifications, package data, sourcing information, and practical selection guidance. It separates confirmed facts from unavailable parameters, helping engineers assess the MPXN2020VMG116 for gateway and industrial embedded designs without relying on unverified electrical assumptions.

Permintaan RFG Kontak
MPXN2120VMG116 - 32-bit 116MHz MCU 2MB Flash | NXP
MPXN2120VMG116

MPXN2120VMG116 - 32-bit 116MHz MCU 2MB Flash | NXP

The NXP Semiconductors MPXN2120VMG116 is a 32-bit e200z650 microcontroller rated at 116 MHz, with 2 MB of flash program memory and 155 I/O in a 208-MAPBGA package measuring 17 mm by 17 mm. It belongs to the NXP PX Series and targets embedded gateway and networking designs requiring integrated communications, real-time control, and substantial onboard program storage. A microcontroller is a programmable semiconductor that integrates a processor core, memory, peripherals, and I/O on one device. Within the embedded-computing hierarchy, this part is a 32-bit MCU, a semiconductor used to execute firmware, acquire inputs, control outputs, and manage communication interfaces. Its e200z650 core provides the processing platform while the PX Series integration reduces the number of external devices required in a gateway controller. The verified product data identifies 2 MB (2M x 8) flash memory, a 116 MHz operating frequency, 155 I/O, and a 208-MAPBGA package. Connectivity listed in the available source data includes CANbus, I²C, LINbus, SCI, SPI, and UART/USART. The listed peripherals include DMA, power-on reset, PWM, and watchdog timer. These interfaces make the device applicable to connected industrial equipment, transport systems, and network-edge controllers where multiple serial buses and deterministic peripheral handling are useful. The MPXN2120VMG116 is reported as obsolete by one data result, although distributor listings also identify NXP and Rochester Electronics inventory records. Lifecycle and sourcing should therefore be confirmed for the exact production quantity. The 208-ball package also demands careful PCB layout and assembly planning because its fine routing density increases assembly complexity compared with leaded or lower-ball-count packages. For new designs, engineers should evaluate current NXP product options rather than assuming an obsolete gateway MCU is suitable for a long production run. When maintaining an existing MPXN2120VMG116 design, validate the exact package, pin mapping, power architecture, clock configuration, memory map, and firmware against the relevant NXP documentation before assembly or repair. This page consolidates the verified distributor specifications, lifecycle information, package details, interface list, sourcing links, and design considerations for this obsolete PX Series microcontroller. It does not infer undocumented electrical ratings, pin names, or replacement parts.

Permintaan RFG Kontak
MPXR4040VVU264 - 264MHz 32-bit MCU with 4MB Flash | NXP
MPXR4040VVU264

MPXR4040VVU264 - 264MHz 32-bit MCU with 4MB Flash | NXP

The NXP Semiconductors MPXR4040VVU264 is a 32-bit Power Architecture e200z7 microcontroller rated at 264 MHz, with 4 MB of flash program memory and 416-ball PBGA packaging. The verified product listing identifies 198 I/O, CANbus, LINbus, SCI, SPI, UART/USART, DMA, PWM, and watchdog connectivity. Its industrial temperature-grade marking and 27 x 27 mm package position it for real-time embedded control systems requiring high processing performance and extensive peripheral integration. A microcontroller is a programmable system-on-chip that combines a processor core, memory, communication peripherals, timers, and I/O in one device. The MPXR4040VVU264 belongs to the PX Series and uses a 32-bit e200z7 core built around Power Architecture technology. This places it in the embedded-controller hierarchy: MCU -> real-time processor -> embedded semiconductor. Its combination of local flash, serial interfaces, and real-time peripherals supports industrial networking, machine control, automotive-style communications, and test equipment without requiring a separate external processor. The verified data confirms a 264 MHz operating speed, 4 MB (4M x 8) flash, 32-bit processing, 198 I/O, and a 416-terminal square BGA package. The available connectivity includes CANbus, EBI/EMI, LINbus, SCI, SPI, UART/USART, DMA, POR, PWM, and WDT. These interfaces allow the device to coordinate networked nodes, external memories, actuator controls, and real-time data paths. The 198 available I/O provide substantial board-level integration for sensors, communication transceivers, power-control signals, and industrial logic. The e200z7 architecture and 264 MHz class position the part in performance-oriented real-time embedded designs rather than low-cost basic control. Flash memory supports local firmware storage, while DMA can reduce processor involvement in data transfers. PWM and watchdog resources support periodic actuator drive and system monitoring, and the communication peripherals cover common industrial and embedded control buses. The supplied data does not specify RAM capacity beyond a conflicting distributor snippet, operating voltage, memory-map details, or electrical timing limits. Typical applications include industrial automation controllers, CAN and LIN network nodes, motor and power-control systems, communications equipment, and embedded test or measurement platforms. Designers should prioritize the 416-ball PBGA layout and verify the exact pin-level requirements, power rails, clock configuration, and board-level escape routing before layout begins. Because the package uses 416 balls rather than a leaded package, a multilayer PCB and appropriate assembly process are normally required. The MPXR4040VVU264 is listed as obsolete by one datasheet source, so procurement should confirm lifecycle and counterfeit risk before committing to new production. LCSC shows a price from $1.0048 in the verified search result, while Heisener reports inventory but requests a quotation. These figures are commercial snapshots, not guaranteed XAIPART inventory or a universal replacement price. This page consolidates verified distributor specifications, interface details, lifecycle signals, sourcing context, and engineering caveats. It is intended to help engineers distinguish the obsolete controller from possible alternatives, assess compatibility, and plan a controlled redesign rather than assuming that any cross-reference is automatically pin-to-pin equivalent.

Permintaan RFG Kontak
MPXS2005VLQ80 - 32-bit 80MHz 512KB Flash MCU | NXP
MPXS2005VLQ80

MPXS2005VLQ80 - 32-bit 80MHz 512KB Flash MCU | NXP

The NXP Semiconductors MPXS2005VLQ80 is a 32-bit e200z4d Power Architecture microcontroller operating at 80 MHz, with 512 KB of flash memory in a 144-LQFP 20 x 20 mm package. The device supports 3.3 V and 5 V operation and is identified in the retrieved distributor data as an automotive-temperature-grade component. Its combination of a 32-bit core, 512 KB program memory, and a high-pin-count gull-wing package makes it suitable for embedded control, automotive electronics, industrial equipment, and communication-oriented systems. A microcontroller is a programmable semiconductor that integrates a processor core, memory, peripherals, and interface circuitry into one device. The MPXS2005VLQ80 belongs to the e200 family and uses the e200z4d core designation shown in the distributor records. The 80 MHz operating frequency provides the timing basis for control loops, protocol handling, and supervisory tasks, while the 512 KB flash capacity supports embedded application code and firmware. The available specification set confirms an e200z4d PX microcontroller, 32-bit architecture, 80 MHz operation, 512 KB organized as 512K x 8 flash, and a 144-LQFP package measuring 20 x 20 mm. The retrieved listings also identify the component as supporting 3.3 V and 5 V operation and as an automotive-temperature-grade device. Detailed electrical limits, peripheral inventories, memory maps, and timing characteristics were not included in the supplied evidence and therefore remain unstated here. The 144-pin LQFP footprint provides a substantial number of external connections for digital I/O and controller peripherals. LQFP, or Low-profile Quad Flat Package, is a surface-mount package family with gull-wing leads on all four sides. The package is larger than many compact embedded packages, but it provides a practical combination of pin access and board-space efficiency for designs requiring numerous external signals. Typical design uses include automotive body or chassis control modules, industrial automation controllers, communication gateways, sensor aggregation units, and embedded motor-control systems. The supplied evidence specifically supports automotive-temperature classification, while the broader application examples are application-fit descriptions rather than claims of manufacturer-listed designs. Designers should verify the complete electrical, timing, peripheral, and pin-level requirements against the official datasheet before schematic capture or PCB release. Because the verified data does not provide a manufacturer PDF URL, a complete pinout, maximum supply voltage, current consumption, or thermal limits, those items must not be inferred from the distributor summaries.

Permintaan RFG Kontak
MPXS2010VLQ120 - 120MHz e200z4 MCU, 1MB Flash | NXP
MPXS2010VLQ120

MPXS2010VLQ120 - 120MHz e200z4 MCU, 1MB Flash | NXP

The NXP Semiconductors MPXS2010VLQ120 is a 32-bit e200z4 core microcontroller operating at 120 MHz, with 1 MB of flash memory organized as 1M x 8 bits, in a 144-LQFP 20 x 20 mm package. It belongs to the PXS20 microcontroller family and is positioned for automotive and industrial embedded systems requiring deterministic real-time control, substantial on-chip flash, and a high pin count for external interfaces. A microcontroller is a programmable integrated circuit containing a processor core, memory, peripherals, and interface logic. The e200z4 core combines instruction execution, interrupt control, and deterministic peripheral access within a single embedded device. The MPXS2010VLQ120 therefore functions as a semiconductor, specifically a 32-bit microcontroller within the broader embedded-control and industrial-automation hierarchy. The verified product data identifies a 120 MHz operating frequency, 1 MB flash configuration, e200z4 architecture, and 144-LQFP package. The high pin count provides more external connection options than a small leadless MCU, although the exact peripheral allocation and electrical limits require the manufacturer datasheet. The 20 x 20 mm gull-wing package is suitable for conventional surface-mount assembly and provides accessible leads for inspection and rework. Typical design uses include automotive body and chassis electronics, industrial controllers, motor-control platforms, communication equipment, and embedded gateways. The 120 MHz core supports computationally intensive control software, while 1 MB flash provides room for application code and configuration data. Designers should still verify memory-map compatibility, peripheral assignments, electrical ratings, and software migration requirements before selecting a substitute. For a robust design, follow the manufacturer reference manual and datasheet for clock, memory, pin-multiplexing, reset, and power-supply requirements. Validate the 3.3 V and 5 V references found in a distributor source against the exact device datasheet, since the supplied search data does not provide complete operating details or an official NXP datasheet URL. This page consolidates the verified distributor specifications, package information, sourcing references, and engineering limitations for MPXS2010VLQ120. It does not invent missing electrical specifications, and it separates confirmed facts from parameters requiring datasheet confirmation.

Permintaan RFG Kontak
MPXS2010VLQ80 - 32-Bit 80MHz 1MB MCU | NXP | Automotive
MPXS2010VLQ80

MPXS2010VLQ80 - 32-Bit 80MHz 1MB MCU | NXP | Automotive

The NXP Semiconductors MPXS2010VLQ80 is a 32-bit e200z4d Power Architecture microcontroller operating at 80 MHz, with 1 MB of flash memory and a 144-LQFP 20 x 20 mm package. The verified distributor data identifies the device as an automotive-temperature-grade MCU and describes a 3.3 V / 5 V operating class. It is suited to embedded automotive control, body electronics, actuator control, instrumentation, and communication-oriented systems where a 32-bit processor, local flash storage, and a high-pin-count package are required. What is a 32-bit microcontroller? A microcontroller is a semiconductor device integrating a processor core, program memory, data memory, peripherals, and interface logic on one integrated circuit. The e200z4d core belongs to the Power Architecture family and provides the computational base for real-time embedded control. In the broader hierarchy, MPXS2010VLQ80 is a microcontroller, embedded processor, semiconductor, and programmable control component. Its 1 MB flash capacity provides room for application code and configuration data, while the 80 MHz clock supports time-dependent control and communication tasks. The supplied data specifically identifies a 32-bit e200z4d core, 80 MHz operation, 1 MB flash organized as 1M x 8, 144 LQFP construction, and automotive temperature grade. The package is described as gull-wing, square, and 20 x 20 mm. These features make the MPN appropriate for larger control modules that need numerous external connections and a conventional fine-pitch surface-mount package. The available verified data does not state RAM size, peripheral inventory, supply-voltage limits, flash endurance, or detailed pin assignments; those values must be confirmed from the official manufacturer documentation before a new design is released. Typical automotive uses include motor and solenoid control, central body modules, sensor aggregation, actuator interfaces, power-window or seat systems, lighting control, and gateway or communications modules. The 144-pin LQFP gives the design access to many external signals compared with a small leadless package, making it convenient for systems requiring several sensors, drivers, communication lines, and discrete control outputs. The 3.3 V / 5 V designation also makes it relevant to mixed-voltage automotive electronics, but the exact rail tolerances and I/O levels require confirmation. For PCB implementation, use the exact NXP datasheet package drawing and pinout rather than relying on generic LQFP assumptions. Confirm exposed-pad or thermal requirements, recommended decoupling, oscillator connections, reset behavior, programming interface, and unused-pin treatment. The 1 MB flash and 80 MHz rating should not be treated as a complete performance guarantee because peripheral clocks and memory-wait behavior require the missing technical data. This product page combines verified distributor specifications, package information, lifecycle-relevant sourcing context, and engineering selection guidance. It intentionally identifies unavailable parameters instead of estimating them, helping engineers distinguish confirmed facts from information that still needs manufacturer-datasheet confirmation.

Permintaan RFG Kontak
MPXS2010VMM80 - 80MHz 1MB 32-Bit MCU | NXP
MPXS2010VMM80

MPXS2010VMM80 - 80MHz 1MB 32-Bit MCU | NXP

NXP Semiconductors MPXS2010VMM80 is a 32-bit e200z4d PX-series microcontroller operating at 80 MHz, with 1 MB (1M x 8) flash memory, in a 257-LFBGA package measuring 14 x 14 mm. The verified distributor information identifies this device as a PXS20-family MCU and lists the package as MAPBGA-257 or 257-LFBGA. A microcontroller is a programmable integrated circuit containing a processor core, memory, peripherals, and interface logic. The PXS20 family belongs to the embedded-processing hierarchy of 32-bit MCU, embedded controller, real-time control, and industrial automation semiconductor devices. This MPXS2010VMM80 combines an e200 RISC architecture with flash-backed program storage for embedded control, communications, and safety-oriented industrial systems. The principal verified specifications are a 32-bit processing architecture, 80 MHz operating frequency, and 1 MB (1M x 8) flash memory. Distributor records also identify an automotive temperature grade, although the exact numeric operating-temperature limits and qualification status are not supplied in the verified data. The 257-ball package exposes the device's extensive external memory, communication, control, debug, and power connections. Typical automotive and industrial uses include powertrain-related control, electronic control units, body and chassis electronics, real-time communications, and safety subsystems. The 80 MHz processing rate supports deterministic embedded workloads, while the 1 MB flash capacity provides room for application code and configuration data. The PXS20 documentation references the PXS20 Microcontroller Reference Manual for functional characteristics and a Safety Application Guide for fail-safe system implementation under IEC 61508. The large BGA package makes PCB layout and thermal design more demanding than a leaded package. Designers should follow the manufacturer's pin assignment, escape-routing, decoupling, and soldering guidance, verify the exposed thermal and supply connections, and complete signal-integrity and power-integrity reviews before release. This page combines the verified distributor identity, package, frequency, memory, pricing, and availability information with application guidance and explicit sourcing boundaries. Missing electrical, pin-level, lifecycle, and qualification values remain marked for verification rather than being inferred from related PXS20 devices.

Permintaan RFG Kontak
MPXS3010VMM150 - PXS30 Dual-Core 150MHz MCU, 1MB Flash, 257-LFBGA | NXP
MPXS3010VMM150

MPXS3010VMM150 - PXS30 Dual-Core 150MHz MCU, 1MB Flash, 257-LFBGA | NXP

The NXP MPXS3010VMM150 is a 32-bit dual-core automotive microcontroller based on the e200z7d Power Architecture cores, operating at up to 150 MHz and packaged in a 257-ball LFBGA (14x14 mm). It integrates 1 MB of embedded flash and 256 KB of SRAM, targeting chassis, body, and safety microcontrollers in next-generation vehicle electrical architectures. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (SRAM), and a rich set of peripherals including timers, ADCs, communication controllers, and GPIO. Within the broader semiconductor hierarchy, an MCU is a sub-category of microprocessors and embedded processors, itself a category of integrated circuits (ICs). The PXS30 family sits inside NXP's chassis and safety MCU portfolio, designed to deliver deterministic real-time performance for ASIL-rated applications. Key features of the MPXS3010VMM150 include dual e200z7d cores running up to 150 MHz, 1 MB of on-chip flash for application code, 256 KB of SRAM for data and stack operations, and an integrated peripheral set targeted at automotive networks (CAN, LIN, FlexRay) and motor-control PWM. The 257-LFBGA package provides a compact 14x14 mm footprint while exposing the full set of address, data, and peripheral pins required for high-throughput signal processing. Technically, the PXS30 architecture leverages a superscalar e200z7d core with branch prediction and DSP extensions, supporting single-precision floating point and signal-processing instructions required for sensor fusion and control loops. The on-chip flash controller and ECC-protected SRAM improve functional safety, while the multi-channel timer and ADC subsystem allows direct interface with resolver, encoder, and current-sensing front ends. Typical applications include automotive chassis control, electric power steering, electronic stability control, airbag systems, and other ASIL-rated safety microcontrollers. The combination of dual-core lockstep capability, large flash, and automotive-qualified peripherals makes it well suited to chassis domain controllers and integrated vehicle dynamics modules. When designing with this part, allocate sufficient PCB area for the 14x14 mm BGA and follow NXP's recommended reflow and decoupling guidelines for fine-pitch BGAs, including microvia stack-ups and matched-length impedance routing for high-speed signals. Plan for boot, debug, and JTAG access during layout to avoid respins. This page synthesizes distributor pricing from DigiKey and Mouser, drop-in alternative MCUs from the same PXS30 family, and practical design notes not collected on any single manufacturer or distributor page.

Permintaan RFG Kontak
MPXS3015VMS180 - 180MHz Dual-Core MCU, 1.5MB Flash | NXP
MPXS3015VMS180

MPXS3015VMS180 - 180MHz Dual-Core MCU, 1.5MB Flash | NXP

NXP Semiconductors MPXS3015VMS180 is a 32-bit dual-core e200z7d PX microcontroller operating at 180 MHz, with 1.5 MB of 8-bit program flash and 384 Kbytes of RAM, supplied in a 473-terminal 19 mm square MAPBGA package. The verified distributor listing also identifies it as automotive-temperature-grade hardware. These headline values place it in the high-performance embedded processor category rather than the basic 8-bit or low-cost 32-bit MCU class. A microcontroller is a semiconductor system containing a processor core, nonvolatile program memory, RAM, peripherals, and interface logic on one integrated device. The MPXS3015VMS180 belongs to the hierarchy MCU, embedded processor, 32-bit microcontroller, and integrated circuit. Its dual e200z7d cores and substantial memory make it suitable for systems that need concurrent control tasks and embedded software rather than only basic input/output sequencing. The verified data confirms 32-bit processing, two cores, a 180 MHz operating speed, and 1.5 MB of flash. A separate verified specification source identifies RAM as 384 Kbytes by 8 bits. The 473-MAPBGA package has a 19 mm by 19 mm body and uses balls rather than wire leads. Partstack further classifies the terminal form as BALL and the package code as LFBGA, while its temperature-grade classification is automotive. This combination of dual-core compute and 1.5 MB program memory can support automotive-oriented embedded controllers, industrial equipment, networking appliances, and other multi-task systems where software organization benefits from parallel instruction streams. The available data does not identify individual communication interfaces, analog functions, supply limits, security features, or pin multiplexing, so those capabilities must be checked in the manufacturer documentation before design release. Thermal and layout planning are critical because a 473-ball BGA concentrates many connections in a 19 mm by 19 mm footprint. Board assembly, ball pitch, escape routing, exposed-pad treatment, and the manufacturer’s recommended land pattern must be verified from the datasheet. A numerically complete 473-pin assignment cannot be reproduced from the supplied snippets without risking incorrect ball mapping. For new designs, engineers should obtain the official Freescale or NXP documentation, confirm the exact pinout and electrical limits, validate software-tool support for the e200z7d architecture, and run lifecycle and supply checks before committing to production. Distributor availability does not by itself establish manufacturer lifecycle status or guaranteed stock. This page combines the verified distributor specifications, pricing evidence, package information, sourcing links, and engineering cautions in one place. It also distinguishes confirmed facts from unavailable parameters and avoids presenting unverified pin assignments or substitute parts as drop-in replacements.

Permintaan RFG Kontak
MPXS3020VMS180 - 180MHz Dual-Core e200z7d MCU 473-MAPBGA | NXP
MPXS3020VMS180

MPXS3020VMS180 - 180MHz Dual-Core e200z7d MCU 473-MAPBGA | NXP

The NXP MPXS3020VMS180 is a 32-bit dual-core automotive microcontroller from the PXS30 family, integrating two e200z7d cores running up to 180 MHz with 2 MB of on-chip Flash and 512 KB SRAM, housed in a 473-MAPBGA (19x19) package. Headline parameters are 180 MHz dual-core operation, 2 MB Flash, 512 KB SRAM, and a 473-ball MAPBGA package measuring 19 mm x 19 mm. The MPXS3020VMS180 is positioned as a high-performance variant in the PXS30 family; speed grades available include 150 MHz and 180 MHz variants sharing identical pinout. A microcontroller (MCU) is an integrated circuit that combines a CPU core, memory (Flash for program code, SRAM for runtime data), and a rich set of on-chip peripherals (timers, communication controllers, ADCs, GPIO) on a single die. The PXS30 family belongs to the broader power-architecture microcontroller taxonomy: e200z7d core -> Power Architecture MCU -> 32-bit automotive microcontroller -> embedded processing IC. The dual-core architecture provides asymmetric lockstep support for safety-critical applications where one core executes code while the second verifies operation in lockstep, enabling ISO 26262 ASIL-D capable systems when paired with the correct safety libraries. Key features include hardware security module (HSE) support for secure boot and cryptographic acceleration, dual e200z7d cores with FPU, a FlexRay communication controller for automotive networking, multi-channel CAN-FD interfaces, two Ethernet controllers (FEC), a 12-bit ADC with up to 48 channels, and a memory protection unit. The 473-MAPBGA package exposes the full peripheral set and supports external bus interfaces for SRAM, NOR Flash, and SDRAM expansion. The PXS30 architecture uses a superscalar e200z7d core with dual-issue capability and a single-precision FPU, achieving high Dhrystone MIPS performance per MHz. Dual cores can operate in either dual-core parallel mode for performance or lockstep mode for safety, with the chip's Error Correction Code (ECC) on Flash and SRAM enabling reliable operation in harsh automotive environments. The integrated crossbar switch provides simultaneous access to Flash, SRAM, and peripherals from both cores without contention. Typical applications include automotive electronic control units (ECUs), advanced driver assistance systems (ADAS) sensor fusion, chassis domain controllers, electric vehicle (EV) battery management systems (BMS), and industrial functional-safety controllers. The FlexRay and CAN-FD peripherals make the device particularly well-suited to chassis and powertrain networks, while the Ethernet MACs support modern zonal architectures. Design consideration: The 473-MAPBGA package requires at least a 4-layer PCB with microvia technology and a 0.8 mm ball pitch footprint; a thermal management strategy with multiple vias under the exposed pad is required to keep junction temperature within the automotive Grade 1 / Grade 2 limits. Power sequencing must follow the NXP reference manual to avoid internal block corruption during cold-boot. This page synthesizes distributor pricing, same-family and cross-family NXP drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

Permintaan RFG Kontak
MSC7116VM1000 - 266MHz Fixed-Point DSP, 400-MAPBGA | NXP
MSC7116VM1000

MSC7116VM1000 - 266MHz Fixed-Point DSP, 400-MAPBGA | NXP

The NXP Semiconductors MSC7116VM1000 is a fixed-point Digital Signal Processor (DSP) in the StarCore SC1400 family, delivering 266 MHz core clock and 266 MIPS performance in a 400-pin MAP-BGA (17x17 mm) package. It integrates a single SC1400 DSP core, 192 Kbyte internal SRAM M1 memory, a 16-way 16 Kbyte instruction cache (ICache), and a four-entry write buffer. A DSP (Digital Signal Processor) is a specialized microprocessor optimized for numerical kernels such as FIR/IIR filters, FFTs, codecs, and modem baseband processing. The StarCore SC1400 architecture belongs to the broader hierarchy: fixed-point DSP -> DSP -> microprocessor -> SoC -> semiconductor. It targets deterministic, real-time signal pipelines where C compiler throughput and zero-overhead looping are critical. Key features of the MSC7116VM1000 include 400 Kbyte on-chip RAM, an 8 Kbyte ROM, an I/O voltage of 3.30 V, and a maximum core supply of 1.14 V. The device exposes a Host Interface, I2C, and UART for system integration. The 400-MAPBGA package supports high-speed parallel memory buses and the dedicated StarCore peripheral set required by telecom, audio, and industrial signal-processing designs. The architecture combines a dual-ALU SC1400 core with tightly-coupled SRAM, giving deterministic interrupt latency and predictable code execution. Compared with general-purpose microcontrollers, the SC1400 sustains 266 MIPS at low MHz, making the part attractive for cost-sensitive multi-channel audio, VoIP, and motor-control loops. Typical applications include VoIP gateways, multi-channel audio processing, industrial motor control, software-defined radio baseband, and embedded imaging pre-processing. Designers often pair the MSC7116VM1000 with external SDRAM, an Ethernet PHY, and a host microcontroller or PowerQUICC companion. When designing, ensure proper decoupling on both the 3.3 V I/O and 1.14 V core rails, and follow the MAP-BGA PCB layout guidelines for the 17x17 mm land pattern. Use a JTAG emulator that supports the StarCore SC1400 for code bring-up, and place the external memory as close as possible to the data bus pins. This page synthesizes distributor pricing from DigiKey and Octopart, drop-in alternatives from the same MSC711x family, and practical layout notes not found in the manufacturer datasheet.

Permintaan RFG Kontak
MSC8122TVT4800V-FR - Quad SC140 DSP, 300MHz, 1.436MB SRAM | NXP
MSC8122TVT4800V-FR

MSC8122TVT4800V-FR - Quad SC140 DSP, 300MHz, 1.436MB SRAM | NXP

The NXP (formerly Freescale) MSC8122TVT4800V-FR is a highly integrated system-on-a-chip that combines four StarCore SC140 extended DSP cores with peripherals including an RS-232 serial interface, four time-division multiplexed (TDM) serial interfaces, thirty-two general-purpose timers, a flexible system interface unit (SIU), an Ethernet interface, and a multi-channel DMA controller, operating at up to 300 MHz in a 431-ball FCBGA package. A digital signal processor (DSP) is a specialized microprocessor whose architecture is optimized for the mathematical operations common in real-time signal processing: multiply-accumulate (MAC) loops, finite impulse response (FIR) filters, and Fast Fourier Transform (FFT) kernels. Within the broader taxonomy, the MSC8122 sits in the hierarchy: DSP -> embedded processor -> microprocessor -> integrated circuit -> semiconductor. Quad-core SC140 devices specifically target dense baseband workloads where parallel cores share memory and peripherals. Key features include 224 Kbytes of internal SRAM M1 memory per core (1436 Kbytes total across the four cores), a 16-way 16 Kbyte instruction cache (ICache), a four-entry write buffer, external cache support, and a programmable interrupt controller. The device supports 3.30 V I/O with a 1.10 V internal core voltage, allowing it to interface with external SDRAM, SRAM, and ROM memory without external level translation. From an architectural perspective, the SC140 core is a 16-bit fixed-point DSP with 32-bit extension, achieving high code density and deterministic interrupt latency. Four cores sharing a single 1.436 MB internal SRAM pool enable partitioning of baseband, vocoder, and packet-processing tasks in wireless infrastructure designs. The Ethernet MAC, four TDM ports, and UART collectively eliminate the need for several companion ASICs in legacy 2G/3G channel-card designs. Typical applications include wireless base station channel cards, voice-over-IP (VoIP) gateways, multi-channel modems, industrial multi-axis motion controllers, and high-density media transcoders. Per the Octopart comparison table, this part is matched against the MSC8144ETVT1000B (SC3400 core) and the MSC8101VT1250F (single-core SC140). When designing with this device, ensure the 1.10 V core supply rail is generated from a low-noise LDO such as TPS7A4701 or a synchronous buck converter with adequate bulk decoupling. The 431-ball FCBGA requires multi-layer PCB stack-up with buried vias and a minimum 4-layer board with continuous ground plane beneath the package for thermal dissipation. This page synthesizes distributor pricing, drop-in alternatives, lifecycle status, and application guidance not found in the manufacturer datasheet alone, sourced from NXP, DigiKey, Octopart, and Avaq.

Permintaan RFG Kontak
MSC8254SAG1000B - Quad-Core SC3850 DSP 1GHz | NXP
MSC8254SAG1000B

MSC8254SAG1000B - Quad-Core SC3850 DSP 1GHz | NXP

The NXP (formerly Freescale) MSC8254SAG1000B is a high-performance quad-core digital signal processor (DSP) built on 45 nm process technology, integrating four StarCore SC3850 DSP subsystems each clocked at 1 GHz in a 783-ball FCPBGA package (29x29 mm). The device is part of NXP's StarCore MSC825x SoC family and delivers performance equivalent to a 4 GHz single-core implementation while maintaining a compact power envelope. What is a multi-core DSP? A digital signal processor (DSP) is a specialized microprocessor whose architecture is optimized for the fast numerical operations required by signal-processing workloads such as FIR/IIR filtering, FFT, modulation/demodulation, and baseband processing. Multi-core DSPs integrate two or more independent cores on one die, sharing a common memory hierarchy and interconnect, to multiply aggregate throughput without raising clock frequency. The MSC8254 sits in the taxonomy: DSP -> multi-core DSP -> StarCore family -> embedded communications SoC, typically deployed in wired/wireless baseband and media-processing infrastructure. Key features include four SC3850 cores, each with 32 KB L1 instruction cache and 32 KB L1 data cache, a unified 512 KB L2 cache configurable as M2 memory in 64 KB increments, an integrated memory management unit (MMU), an extended programmable interrupt controller (EPIC), and two general-purpose 32-bit timers per core. High-speed peripherals include DDR2/DDR3 memory controllers with ECC, two Gigabit Ethernet interfaces, two Serial RapidIO (SRIO) ports, two PCI Express interfaces, a QUICC Engine subsystem, and multiple TDM/HDI serial interfaces. The architecture combines the deterministic real-time DSP compute path with a rich control-plane I/O set, enabling the part to serve as a single-chip baseband or media-processing node. The 45 nm process and integrated peripherals eliminate external co-processors in many designs, reducing BOM cost and board area. Typical applications include wireless base station baseband processing, media gateway transcoding, radar signal processing, defense and aerospace DSP subsystems, and high-density channel cards in telecom infrastructure where the multi-core SC3850 compute density outperforms single-core legacy DSPs. When designing with the MSC8254, allocate thermal budget carefully: under maximum load the device can exceed 12 W dissipation, requiring a properly designed PCB thermal via array under the FCPBGA. Memory layout must respect the DDR2/DDR3 controller's fly-by topology to preserve signal integrity at 800 MT/s. This page consolidates distributor pricing, cross-reference alternatives, and design considerations not found in a single place in the manufacturer datasheet. All listed prices are accurate as of 2026-10-14.

Permintaan RFG Kontak
MSP430A001IPM - 16-Bit 8MHz MCU 16KB Flash | Texas Instruments
MSP430A001IPM

MSP430A001IPM - 16-Bit 8MHz MCU 16KB Flash | Texas Instruments

Texas Instruments MSP430A001IPM is a 16-bit RISC microcontroller featuring an 8 MHz operating clock, 16KB of flash program memory, and 512 bytes of RAM in a 64-pin LQFP (10 x 10 mm) package. The device is designed for embedded control applications where a compact processor, low-power operation, and integrated analog measurement can reduce the number of external components. A microcontroller is a programmable system-on-chip that combines a CPU core, nonvolatile program memory, working memory, and peripheral interfaces on one package. Within the embedded-control hierarchy, the MSP430A001IPM is a general-purpose 16-bit MCU within the MSP430 family. Its compact package and embedded resources make it suitable for controllers, measurement instruments, sensor nodes, and small industrial automation modules. Key device characteristics include a 16-bit MSP430 RISC core, 8 MHz maximum clock, 16KB flash memory, 512 bytes of RAM, and a 12-bit ADC. The 64-LQFP package provides 48 I/O lines according to product listings, offering more external connectivity than smaller MCU packages. Operation at 2.5 V or 3.3 V supports both lower-voltage and conventional 3.3 V embedded systems. The 16-bit architecture provides efficient handling of sensor data, control variables, and status information while retaining a relatively simple programming model. Flash memory retains firmware without a separate external program-memory device, and the integrated ADC supports applications that must measure analog inputs. With 512 bytes of RAM, the MCU is best suited to firmware that processes sampled values and manages peripherals without requiring a large display framebuffer or complex data structures. Typical uses include industrial sensor interfaces, compact environmental monitors, low-power measurement controllers, appliance control modules, and embedded data-acquisition systems. The 12-bit ADC is particularly useful in designs that convert physical inputs, such as temperature, pressure, or potentiometer positions, into digital values for control and monitoring. Designers should verify the exact pin allocation, power requirements, and peripheral availability in the manufacturer datasheet before laying out a PCB. Because the MSP430A001IPM uses a 64-pin LQFP footprint, routing should preserve access to all power pins and expose programming and debug signals. Decoupling capacitors should be placed close to the supply pins, while analog inputs should be routed away from fast-changing digital signals. This page combines the core device characteristics with package, sourcing, application, and design guidance. It also distinguishes verified device attributes from unresolved pin-level details, helping engineers assess the MSP430A001IPM before beginning a new embedded design.

Permintaan RFG Kontak
MSP430A002IPM - 16-Bit 8MHz MCU 32KB Flash | Texas Instruments
MSP430A002IPM

MSP430A002IPM - 16-Bit 8MHz MCU 32KB Flash | Texas Instruments

The Texas Instruments MSP430A002IPM is a 16-bit mixed-signal microcontroller with an 8 MHz MSP430 RISC core, 32 KB of Flash program memory plus 256 bytes, 1 KB of RAM, 48 I/O ports, and a 64-LQFP 10 mm × 10 mm package. Its stated operating supply range is 1.8 V to 3.6 V. A microcontroller is a programmable integrated circuit that combines a processor core, memory, and peripherals into one device. The MSP430 belongs to the embedded microcontroller hierarchy and is designed to execute firmware, acquire measurements, control outputs, and manage communications in compact electronic systems. This particular MSP430x1xx device is positioned for low-power embedded control rather than high-performance computing. Key verified features include 32 KB of Flash memory, 1 KB of RAM, 48 I/O ports, a 12-bit ADC, and two USART interfaces. The 8 MHz clock provides a defined processing-rate reference for control loops and peripheral service, while the 1.8 V to 3.6 V supply range supports common low-voltage embedded rails. The industrial temperature grade and 64-terminal surface-mount package suit equipment where a conventional LQFP footprint is required. The MSP430 architecture is based on a 16-bit RISC core and integrates flash-backed firmware storage with on-chip RAM. Its mixed-signal and communications resources allow one device to handle sensor conditioning, control logic, and serial communications. Two USARTs can support asynchronous UART or synchronous SPI functions, although the exact peripheral routing and operating limits must be confirmed against the manufacturer datasheet and the selected board design. Typical uses include industrial instrumentation, data acquisition, embedded control, sensor-interface equipment, and communication-enabled low-power systems. The 48 I/O ports provide substantial external connectivity for discrete inputs and outputs, while the 12-bit ADC supports analog measurement channels. The two USARTs can reduce the need for separate interface controllers when the system architecture permits their shared use. When designing around MSP430A002IPM, verify the exact pin multiplexing, power requirements, clock configuration, ADC channels, and programming interface against the official 64-pin pinout. Use a PCB layout and decoupling arrangement that follows the manufacturer guidance. Because the verified data identifies the package as 64-LQFP (10x10), the library package key is lqfp-64 and the pinout must contain 64 entries. This page consolidates the verified distributor and manufacturer-related specifications, while clearly flagging details that were not supplied. It also distinguishes confirmed attributes from unavailable pin-level, pricing, compliance, and substitute information so engineers can make a traceable procurement and design decision.

Permintaan RFG Kontak
MSP430A018IPN - 16-Bit 8MHz MCU | Texas Instruments
MSP430A018IPN

MSP430A018IPN - 16-Bit 8MHz MCU | Texas Instruments

Texas Instruments MSP430A018IPN is a 16-bit mixed-signal microcontroller operating at up to 8 MHz, with 60 KB of Flash memory and 256 bytes of RAM in an 80-pin LQFP package measuring 12 mm by 12 mm. The device combines an RISC-based MSP430 architecture with mixed-signal peripherals for embedded control, sensor measurement, communication, and low-power instrumentation. A microcontroller is a programmable system-on-chip that integrates a processor core, memory, input/output ports, and peripherals into one device. The MSP430 family belongs to the embedded processor and microcontroller hierarchy and is designed for compact control systems that need deterministic peripheral handling, efficient C-language development, and flexible low-power operation. The MSP430A018IPN is positioned for designs requiring more I/O and memory than the smallest MSP430 devices without moving to a larger general-purpose MCU architecture. The manufacturer identifies a 16-bit instruction set, an 8 MHz clock speed, 60 KB of Flash program memory, 256 bytes of RAM, and 48 I/O ports as principal device characteristics. Flash memory retains programmed firmware when power is removed, while RAM provides working storage for variables, stack operations, and interrupt-service routines. The 80-pin LQFP package exposes substantially more interface pins than smaller MSP430 packages and is suitable for boards requiring multiple analog or digital connections. The MSP430 architecture is based on a reduced instruction set computer design with a 16-bit register and address space. Its peripherals include USART capability for serial data links and mixed-signal resources for systems that combine digital control with sensor or analog signal conditioning. The operating-voltage range is 1.8 V to 3.6 V, making the device suitable for low-voltage embedded systems whose supply rails remain within that interval. The documented industrial temperature range is -40°C to +85°C. Typical uses include industrial sensor controllers, compact data-acquisition systems, building and automation controllers, communication equipment, and battery-operated instruments. In these systems, the MSP430A018IPN can execute control logic, supervise external sensors, manage digital inputs and outputs, and support serial connectivity while keeping the design in a single low-power MCU package. Designers should confirm the exact peripheral allocation and alternate-function mapping for every package pin in the manufacturer datasheet before laying out the PCB. Decoupling should be placed close to the supply pins, programming and debug access should remain serviceable, and unused I/O pins should be handled according to the device's stated requirements. The LQFP package also requires attention to thermal spreading on boards that expose the MCU to sustained high ambient temperatures. This product page combines the manufacturer's core device characteristics with practical selection guidance, package-focused comparison information, and engineering notes for embedded designers. It also identifies the limits of the available alternatives: a true drop-in replacement must retain the same 80-pin LQFP footprint, pin functions, memory organization, voltage range, and clock performance rather than merely providing similar mixed-signal functionality.

Permintaan RFG Kontak
MSP430A023IPM - 16-Bit 8MHz 8KB MCU | Texas Instruments
MSP430A023IPM

MSP430A023IPM - 16-Bit 8MHz 8KB MCU | Texas Instruments

Texas Instruments MSP430A023IPM is a 16-bit mixed-signal microcontroller with an 8 MHz operating frequency, 8 KB of flash memory organized as 8K x 8 plus 256 bytes, and a 64-LQFP package measuring 10 x 10 mm. It belongs to the MSP430x4xx family and is designed for compact embedded systems that require efficient control, low-power operation, and mixed-signal measurement capability. A mixed-signal microcontroller is an embedded processing device that combines a digital processor core with analog input or output functions. The MSP430 belongs to the microcontroller hierarchy, combining a reduced instruction set computer core, memory, timers, serial interfaces, and analog peripherals within one integrated circuit. This integration allows a product to sense, process, and control external variables without requiring several separate components. The MSP430A023IPM provides 8 KB of flash memory, 16-bit processing, and an 8 MHz clock. Its 64-LQFP package provides a comparatively high pin count for direct access to peripheral and interface functions. The 1.8 V to 3.6 V operating range supports low-voltage embedded equipment, while the flash memory allows firmware to be retained in the device itself. The exact RAM, analog-channel, timer, and serial-interface details should be confirmed in the manufacturer datasheet before assigning every peripheral function. The MSP430 architecture uses a 16-bit RISC core designed around efficient register-based operation and low-power embedded control. Its mixed-signal capabilities make the device suitable for applications that acquire analog measurements and apply digital control or communication. An 8 MHz clock provides a practical operating point for motor, meter, sensor-controller, and industrial-control designs that do not require a high-performance application processor. Typical uses include low-power sensing nodes, compact instrumentation, industrial control modules, appliance controls, and embedded systems that measure analog inputs and operate actuator or communication interfaces. The 10 x 10 mm LQFP format is especially useful for multilayer boards where a moderate pin count and exposed through-hole assembly are preferable to a very small leadless package. PCB implementation should follow the manufacturer pin and land-pattern guidance, including decoupling placement and exposed thermal-pad requirements where applicable. Firmware development should account for the selected clock source, watchdog behavior, analog reference arrangement, unused I/O handling, and reset requirements. This page combines device specifications, sourcing guidance, replacement criteria, and practical design considerations for engineers evaluating the MSP430A023IPM.

Permintaan RFG Kontak
MSP430A024IPM - 16-Bit 8MHz Low-Power MCU | Texas Instruments
MSP430A024IPM

MSP430A024IPM - 16-Bit 8MHz Low-Power MCU | Texas Instruments

The Texas Instruments MSP430A024IPM is a 16-bit mixed-signal microcontroller with an 8 MHz clock, 60 KB of flash memory including 256 bytes of information memory, and a 64-LQFP 10 x 10 mm package. It belongs to the MSP430x1xx family and is designed for low-power embedded control, sensor monitoring, data acquisition, and industrial instrumentation applications. An MSP430 mixed-signal microcontroller combines a reduced instruction set computer core, analog peripherals, digital I/O, and low-power sleep modes in one device. The MSP430A024IPM provides 60,000 bytes of flash program memory and 256 bytes of information memory, making it suitable for firmware, configuration data, calibration constants, and compact control algorithms. Its 16-bit RISC architecture supports efficient time-based and event-driven control. The principal device characteristics include an 8 MHz maximum clock, a 2.2 V operating supply specified for this ordering code, and a 64-LQFP package. The industrial temperature grade and square gull-wing package support robust assemblies where PCB space is available. Its integrated mixed-signal architecture reduces the need for separate analog interface components in measurement and control systems. MSP430A024IPM is particularly useful when energy efficiency, deterministic control, and compact firmware matter more than processing throughput. Low-power operating modes can extend service life in battery-operated instruments, while multiple timer, communication, and analog functions support autonomous sensing. The 8 MHz clock also provides sufficient performance for protocol handling, data filtering, status monitoring, and real-time control loops. Typical applications include industrial sensor transmitters, portable measurement equipment, environmental monitors, building-control nodes, industrial panel controls, and low-power embedded data loggers. In each case, the MCU can coordinate sensor inputs, perform local calculations, manage a communications interface, and place unused sections of the design into low-power states between events. PCB design should preserve the manufacturer's recommended decoupling and layout practices. Place the supply bypass capacitor close to the device power pins, route sensitive analog inputs away from switching nodes, and confirm the exposed thermal and assembly requirements of the 64-LQFP package before high-volume production. This product page combines manufacturer documentation references, package information, engineering-oriented application guidance, and same-family drop-in comparison information to support component selection, PCB planning, and procurement decisions.

Permintaan RFG Kontak
MSP430A025IPM - 16-Bit 8MHz Mixed-Signal MCU | Texas Instruments
MSP430A025IPM

MSP430A025IPM - 16-Bit 8MHz Mixed-Signal MCU | Texas Instruments

The Texas Instruments MSP430A025IPM is a 16-bit mixed-signal microcontroller operating at up to 8MHz, with 32KB of flash memory, 2KB of RAM, and a 64-LQFP package measuring 10mm by 10mm. It combines an embedded MCU with mixed-signal processing resources for compact control systems that require efficient local sensing, timing, and digital control. A mixed-signal microcontroller is a semiconductor device that integrates digital control functions with analog and peripheral resources. In the broader product hierarchy, the MSP430A025IPM is a microcontroller, an embedded processing IC, and a member of the semiconductor category. Its architecture is suited to industrial control, metering, instrumentation, and low-energy embedded systems where local computation must operate alongside analog signal acquisition and precise timing functions. Key device characteristics include a 16-bit processor, an 8MHz clock rating, 32KB of flash organized as 32K by 8 bits plus 256 bytes, 2KB of RAM, and two timers. The 64-LQFP package provides 64 gull-wing terminals and supports compact, surface-mounted PCB layouts. The industrial temperature grade supports applications across the industrial equipment range, while the mixed-signal designation supports designs that connect sensing, conversion, and control functions without relying on a separate discrete controller. The MSP430 platform centers on an integrated 16-bit RISC processing environment. Its flash memory provides nonvolatile program storage for firmware, while the 2KB RAM supports stack operations, data buffers, and working variables. The two timers can support periodic control tasks, event timing, or input-capture and output-comparison functions. Exact pin assignments, clock requirements, conversion characteristics, and peripheral limits should be confirmed against the manufacturer datasheet before PCB release. Typical applications include industrial panel meters, temperature-measurement instruments, portable diagnostic equipment, sensor-conditioning controllers, battery-powered monitors, and compact embedded control modules. The 8MHz processing ceiling supports responsive digital control, while the mixed-signal integration is useful when analog measurement and control logic must coexist within a small board area. A critical design step is to assign every terminal according to the 64-pin datasheet diagram and preserve the required decoupling and signal-routing practices. Confirm the selected analog and digital functions, exposed interfaces, operating voltage limits, clock configuration, and programming method before schematic and layout completion. This page combines the device specifications, application guidance, same-family drop-in options, and engineering design considerations needed to evaluate the MSP430A025IPM for a new embedded control design.

Permintaan RFG Kontak
MSP430A026IPM - 16-Bit 8MHz 60KB MCU | Texas Instruments
MSP430A026IPM

MSP430A026IPM - 16-Bit 8MHz 60KB MCU | Texas Instruments

The Texas Instruments MSP430A026IPM is a 16-bit mixed-signal RISC microcontroller with an 8 MHz clock, 60 KB flash memory and 2 KB RAM in a 64-LQFP 10 mm x 10 mm package. It also includes a 12-bit ADC, 256 bytes of information flash and support for 2.5 V and 3.3 V operation. These characteristics place it in the MSP430x1xx family of low-power embedded controllers for industrial sensing, instrumentation and compact control systems. A mixed-signal microcontroller is an embedded semiconductor that combines a digital processor core with analog peripherals. The processor executes firmware, while the ADC converts analog sensor signals into digital values for processing. In the broader hierarchy, this device is a microcontroller, an embedded processing IC and a mixed-signal system-on-chip designed to reduce the number of separate components required in measurement and control equipment. The MSP430A026IPM provides 60 KB of flash for firmware and constants, 2 KB of RAM for working data and 256 bytes of information flash for configuration or identification data. Its 16-bit RISC architecture, 8 MHz maximum clock and 12-bit ADC support responsive acquisition while keeping the device focused on embedded control rather than high-performance computing. The 64-LQFP package also provides more I/O and analog connectivity than smaller microcontroller packages. The MSP430 architecture is associated with low-power embedded designs because it can retain state in RAM and react to interrupt-driven events. This is useful in systems that spend substantial time waiting for sensors, operator input or scheduled events. Exact standby current, active current, timer channels, I/O count and operating-temperature limits must be confirmed in the manufacturer datasheet before final power-budget or safety qualification. Typical uses include industrial process monitoring, portable instrumentation, low-power sensor acquisition, digital panel equipment and low-speed control loops. The 12-bit ADC is especially relevant to temperature, level, pressure and current sensing, while the 60 KB flash capacity accommodates more application code than many entry-level MSP430 variants. The 64-pin package is useful when a design needs both analog inputs and a broad set of general-purpose digital interfaces. PCB implementation should follow the manufacturer land pattern and pin-description table exactly. Place the required decoupling capacitors close to their designated supply pins, route sensitive analog inputs away from switching nodes and high-current outputs, and provide a continuous ground reference beneath the device. Confirm which pins are multiplexed for ADC functions before assigning analog channels in the PCB schematic. This product page combines the confirmed memory, speed, ADC, voltage and package characteristics with practical design guidance, application fit, sourcing information and a focused comparison against verified same-family alternatives. It is intended to help engineers identify whether the MSP430A026IPM matches the required embedded-control architecture before moving to detailed datasheet verification.

Permintaan RFG Kontak
MSP430A048IPM - 16-Bit 8MHz MCU | Texas Instruments
MSP430A048IPM

MSP430A048IPM - 16-Bit 8MHz MCU | Texas Instruments

Texas Instruments MSP430A048IPM is a 16-bit ultra-low-power mixed-signal microcontroller operating at up to 8 MHz, with 8 KB of flash memory, 256 bytes of RAM, and a 64-LQFP 10 x 10 mm package. According to the manufacturer datasheet, it also integrates a comparator and supports up to 96 LCD segments. The combination of a 16-bit CPU, mixed-signal peripherals, segmented LCD drive capability, and compact package makes the device suitable for compact, low-power instruments, meters, industrial control panels, and embedded measurement systems. A mixed-signal microcontroller is an embedded processing device that combines a digital CPU and program memory with analog and communication peripherals on one chip. The MSP430A048IPM belongs to the MSP430 mixed-signal microcontroller family. Its low-power architecture is designed for systems that spend much of their operating time measuring, displaying information, responding to inputs, or waiting between user actions. Rather than continuously executing computationally intensive work, an MSP430-based product can use low-power operating modes to reduce energy consumption. The device provides 8 KB of flash memory organized as 8K x 8 plus an additional 256 bytes, together with 256 bytes of RAM. Its 16-bit processing architecture supports efficient control operations while operating at up to 8 MHz. Integrated analog resources include a comparator, while the LCD capability can drive as many as 96 segments. These functions reduce the need for separate display drivers and analog interface components in suitable panel-based designs. Exact supply voltage, current, timing, and peripheral details should be confirmed in the manufacturer datasheet before circuit design. The MSP430A048IPM is particularly relevant to low-power mixed-signal products because the CPU, flash, RAM, comparator, and LCD interface are integrated in one device. The 64-LQFP package provides 64 available package positions and is larger than the smallest packages in the MSP430 portfolio, making it practical where adequate component spacing, test access, and manual assembly are priorities. Because no complete pin-description table appears in the product listings, the package drawing should be checked against the manufacturer datasheet before assigning tracks or test points. Typical uses include compact digital multimeters, panel meters, portable environmental monitors, industrial measurement instruments, and human-machine-interface controllers. The LCD segment capability is particularly useful for dedicated numerical displays, while the comparator can support threshold detection, signal conditioning, or basic control functions. In a portable meter, the MCU could acquire a sensor signal, evaluate it, update a segmented display, and enter a low-power state between measurement events. Firmware and peripheral selection must be checked against the complete device documentation. A key design consideration is the balance between memory capacity and functionality. With 8 KB of flash and 256 bytes of RAM, this MCU is intended for compact control code rather than large buffers, complex graphical interfaces, or heavy connectivity stacks. Designers should reserve flash for interrupt handlers and time-critical routines, avoid unnecessary RAM copies, and validate every peripheral configuration against the datasheet. The 64-LQFP footprint also requires a PCB land pattern and pin assignment based on the official package drawing. This product page combines the exact manufacturer and distributor identity, memory and packaging details, comparator and LCD capabilities, application guidance, and a conservative replacement assessment. It separates confirmed device characteristics from parameters that require direct datasheet review, helping engineers plan a mixed-signal design while reducing the risk of assuming unverified pin or electrical details.

Permintaan RFG Kontak
MSP430A051IPM - 8MHz 16-Bit MCU | TI | Embedded Control
MSP430A051IPM

MSP430A051IPM - 8MHz 16-Bit MCU | TI | Embedded Control

Texas Instruments MSP430A051IPM is a 16-bit ultra-low-power microcontroller with an 8 MHz operating frequency, 16 KB of flash memory, 512 bytes of RAM, a 12-bit ADC, and a 64-pin LQFP package measuring 10 mm by 10 mm. It combines a compact RISC processor, mixed-signal peripherals, and low-power operation for embedded sensing, measurement, and control systems. An ultra-low-power microcontroller is a semiconductor designed to complete control tasks while consuming very little electrical power. The MSP430 belongs to the broader hierarchy of embedded microcontroller, processor, and semiconductor devices. Its architecture supports event-driven execution, allowing software to remain in a low-power state until a timer, comparator, serial-interface event, or external interrupt requires service. Key features include 16 KB of flash memory for program storage, 512 bytes of RAM for working data, and a 12-bit analog-to-digital converter for sensor and analog-voltage measurements. A USART supports serial communication with sensors, displays, data loggers, and host systems. The stated 1.8 V to 3.6 V operating range supports low-voltage embedded designs, while the -40°C to +85°C temperature range covers industrial-temperature environments. The MSP430A051IPM combines a 16-bit RISC core with integrated mixed-signal resources in one 64-LQFP device. Flash memory supports in-circuit programming and firmware retention, while RAM provides space for stack operations, acquisition buffers, and control variables. The 8 MHz clock provides a practical balance between instruction throughput, active current, and the ability to remain idle between events. Typical applications include battery-powered sensor nodes, industrial measurement instruments, compact data loggers, building and access-control modules, and low-power monitoring equipment. The 12-bit ADC is especially useful when the design must acquire analog inputs without adding a separate converter. The USART can connect the controller to external sensors or a host processor using a documented serial protocol. PCB design should preserve short analog and power paths, with the device ground and analog reference connections following the pin-description table in the manufacturer datasheet. Place decoupling capacitors close to the supply pins, route sensitive analog inputs away from switching nodes, and include programming access for the supported flash-programming interface. Verify unused-pin handling and termination requirements before releasing the layout. This page combines operating characteristics, family-level replacement options, package guidance, application analysis, and practical PCB design notes to support faster component selection, firmware planning, and hardware bring-up.

Permintaan RFG Kontak