Mikrokontroler

Produk (20.000+)

PIC32MZ2048ECM144-I/PH - 200MHz 32-Bit MCU 2MB Flash | Microchip
PIC32MZ2048ECM144-I/PH

PIC32MZ2048ECM144-I/PH - 200MHz 32-Bit MCU 2MB Flash | Microchip

The Microchip Technology PIC32MZ2048ECM144-I/PH is a 32-bit MIPS32 microAptiv PIC32MZ Embedded Connectivity (EC) microcontroller integrating 2 MB Flash and 512 KB SRAM, operating up to 200 MHz with 3.3 V I/O in a 144-pin TQFP (16x16 mm, 0.4 mm pitch) package. The MIPS32 microAptiv core delivers 330 DMIPS and 3.28 CoreMark/MHz, while dedicated peripherals cover HS USB 2.0 Host/Device/OTG, 10/100 Ethernet MAC with MII/RMII, two CAN 2.0b controllers, I2S for audio, and a parallel master port for graphics. According to Microchip datasheet 60001191G, the part is designated Not Recommended for New Designs (NRND); customers should migrate to the pin-compatible PIC32MZ2048EFM144 family that adds a hardware Floating Point Unit and 252 MHz operation. A 32-bit microcontroller (MCU) is a programmable system-on-chip that integrates a high-performance processor core, Flash program memory, SRAM, and a rich mix of analog and digital peripherals on a single die. Within the embedded taxonomy, the PIC32MZ EC sits in the high-performance connectivity tier between 8/16-bit MCUs and application processors, targeting industrial HMI, audio, and connected-embedded designs. Its hypernyms are MCU, embedded controller, RISC processor; common synonyms are 32-bit MCU and Cortex-M-class competitor (although the core is MIPS, not ARM). Key differentiating features of the PIC32MZ2048ECM144-I/PH include 2 MB dual-bank Live-Update Flash supporting field firmware upgrades without downtime, 512 KB SRAM, 4 KB EEPROM emulation, a 12-bit 18 MSPS ADC with up to 48 analog channels, six UART, four SPI, five I2C, and Peripheral Pin Select (PPS) for flexible signal routing. The 32-channel DMA controller and eight output compare / PWM modules make it well suited to multi-protocol industrial stacks running FreeRTOS, OPENRTOS, or Micrium OS-III. Architecturally, the device combines the microAptiv scalar pipeline with a tightly-coupled SRAM block, dedicated DMA, and a hardware crypto accelerator supporting AES, 3DES, SHA, MD5, and RNG for secure connectivity. Compared with the older PIC32MX series, the EC family delivers roughly 5x the Dhrystone performance and adds Ethernet, CAN, and HS USB on-chip, eliminating external PHY transceivers in many designs and reducing BOM cost. Typical applications include industrial Ethernet gateways, building automation controllers, automotive infotainment/CAN nodes, audio processing with I2S codec interfaces, and graphical HMI panels using the PMP. Engineers should consider migrating to PIC32MZ2048EFM144 (FPU + 252 MHz, pin-compatible) for new designs because the EC family is officially NRND. When designing, observe the 3.3 V supply requirement and use a 24 MHz crystal with the on-chip PLL to derive 200 MHz; the I/O banks tolerate 5 V inputs. Decouple each VDD/VSS pair with 100 nF plus bulk capacitance within 5 mm of the pins. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found on a single manufacturer page, including parametric comparison against the recommended PIC32MZ EF successor.

Permintaan RFG Kontak
PIC32MZ2048ECM144-I/PL - 32-bit 200MHz MCU, 2MB Flash, 144-LQFP
PIC32MZ2048ECM144-I/PL

PIC32MZ2048ECM144-I/PL - 32-bit 200MHz MCU, 2MB Flash, 144-LQFP

The Microchip Technology PIC32MZ2048ECM144-I/PL is a 32-bit MIPS32 microAptiv PIC32MZ Embedded Connectivity (EC) family microcontroller running up to 200 MHz, integrating 2 MB of Flash and 512 KB of SRAM, and housed in a 144-pin LQFP (20x20 mm) package. The EC family targets connectivity-rich designs requiring Hi-Speed USB, 10/100 Ethernet, CAN, and Crypto engines, with 120 general-purpose I/O pins available on this 144-pin device. A 32-bit microcontroller (MCU) is a single-chip processor that integrates a CPU core, memory, and peripherals on one die. The PIC32MZ EC family sits within Microchip's higher-tier PIC32 lineup (PIC32MX -> PIC32MZ EC -> PIC32MZ EF -> PIC32MZ DA) of MIPS-based microAptiv devices, which sit in the broader hierarchy of embedded processors -> microcontrollers -> semiconductors -> integrated circuits. EC parts add Ethernet MAC, HS-USB, and a hardware Crypto engine on top of standard PIC32MZ peripherals. Key features include a 200 MHz core with 252 DMIPS throughput, hardware Crypto and RNG blocks, dedicated Audio I2S and Graphics LCD interfaces, 12-bit 5 MSPS ADC, and Hi-Speed USB plus 10/100 Ethernet MAC. The 144-LQFP package provides 120 GPIO, ample for HMI, motor control, and multi-bus industrial nodes. The device uses a 5-stage pipeline MIPS32 microAptiv core with DSP extensions, dual Flash panels for live-update, and a dedicated DMA controller with 8 independent channels. The wide peripheral set is interconnected through a multi-layer bus matrix that prevents bandwidth bottlenecks when Ethernet, USB, and LCD run concurrently. Typical applications include industrial Ethernet gateways, automotive infotainment and telematics (CAN + Ethernet), IoT edge nodes with TLS acceleration, graphical HMI panels with integrated LCD controller, audio playback products using the I2S interface, and PLCs. Microchip's MPLAB Harmony framework provides integrated middleware for these use cases. When designing with this part, ensure the 144-LQFP PCB layout uses four-layer minimum to handle the HS-USB 90-ohm differential pair and the Ethernet RMII/RGMII signals. Decouple VDD with 0.1 uF + 10 uF per pin group, and reserve the dedicated REFCLK pin for the Ethernet PHY. Note that this EC part is NRND; new designs should migrate to the PIC32MZ2048EFM144 (FPU + higher speed) variant. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, including cross-reference pointers to the EF family successor and same-package PIC32MZ EC siblings.

Permintaan RFG Kontak
PIC32MZ2048ECM144T-I/PH - 200MHz 2MB Flash 144-TQFP MCU | Microchip
PIC32MZ2048ECM144T-I/PH

PIC32MZ2048ECM144T-I/PH - 200MHz 2MB Flash 144-TQFP MCU | Microchip

The Microchip Technology PIC32MZ2048ECM144T-I/PH is a 32-bit MIPS32 microAptiv PIC microcontroller delivering 200 MHz / 330 DMIPS performance with 2 MB of Flash and 512 KB of SRAM, housed in a 144-pin TQFP (16x16 mm) package. It integrates Ethernet MAC, HS USB, CAN, Crypto engine, and a 12-bit 500 KSPS ADC with 48 channels, targeting industrial connectivity and embedded-graphics applications. A microcontroller (MCU) is a single-chip computer containing a CPU core, program memory (Flash), data memory (SRAM), and on-chip peripherals such as ADCs, communication controllers, and timers. Within the broader power management and embedded hierarchy, MCUs belong to the integrated-circuit family; within the MCU family, the PIC32MZ EC (Embedded Connectivity) line sits between the lower-end PIC32MX series and the higher-performance PIC32MZ EF (Enhanced) family, optimizing the balance between connectivity peripherals and raw processing throughput. Key features include 200 MHz core clock with single-cycle MAC and dual-panel Flash for live-update field deployments, microMIPS instruction mode for up to 35% code compression, and an integrated Memory Management Unit (MMU) for embedded OS execution. The 120 I/O pins expose CAN, UART, I2C, PMP, EBI, SQI, and SPI/I2S interfaces, enabling direct connection of audio codecs, external memory, and high-speed peripherals without external glue logic. Architecturally, the microAptiv core combines four 64-bit accumulators with saturating and fractional math, optimizing DSP-style workloads such as audio decoding and sensor fusion. The Ethernet MAC, USB 2.0 HS PHY interface, and hardware Crypto engine accelerate secure-connected designs without burdening the CPU with bit-banging or software stacks. The dual-panel Flash supports concurrent read/write, enabling live firmware updates without service interruption. Typical applications include industrial IoT gateways with Ethernet connectivity, secure-connected HMI terminals with TFT-LCD panels, automotive body and infotainment ECUs requiring CAN, and audio playback systems leveraging the I2S interface. The wide peripheral set also suits motor-control and point-of-sale terminals. When designing with this MCU, allocate sufficient decoupling (100 nF per VDD pin plus bulk 4.7 uF) and ensure the 16 MHz primary oscillator trace is short and guarded. Verify voltage tolerances on analog inputs against the 12-bit ADC reference and use the MMU-aware build configuration when targeting RTOS or Linux variants. This page synthesizes distributor pricing, verified drop-in alternatives from Microchip's same PIC32MZ EC family, and practical design notes that complement the manufacturer datasheet.

Permintaan RFG Kontak
PIC32MZ2048ECM144T-I/PL - 200MHz 2MB Flash MCU | Microchip
PIC32MZ2048ECM144T-I/PL

PIC32MZ2048ECM144T-I/PL - 200MHz 2MB Flash MCU | Microchip

The Microchip Technology PIC32MZ2048ECM144T-I/PL is a high-performance 32-bit MIPS32 microAptiv PIC32MZ microcontroller running at up to 200MHz with 2MB of Flash and 512KB of SRAM in a 144-pin LQFP (20x20mm) package. It integrates an on-chip crypto engine, 10/100 Ethernet MAC, CAN, USB 2.0 high-speed OTG, and a 12-bit ADC for embedded connectivity applications. A 32-bit MCU (microcontroller unit) is a single-chip processor that integrates CPU core, memory, and peripherals for embedded control. Within the broader taxonomy, 32-bit MCUs sit between 8/16-bit microcontrollers and application processors; the MIPS32 microAptiv core places PIC32MZ in the high-performance deterministic-RTOS tier, well suited to industrial networking, IoT gateways, and HMI applications where the combination of large Flash, ample RAM, and integrated connectivity peripherals reduces BOM cost. Key features include a 200 MHz / 252 DMIPS core, 2MB Flash with ECC, 512KB SRAM, 120 general-purpose I/O, 12-bit 18 MSPS ADC, USB 2.0 high-speed OTG, 10/100 Ethernet MAC, dual CAN, and dedicated crypto engines (AES, 3DES, SHA, MD5). The integrated peripherals eliminate the need for external connectivity ASICs in typical designs. The PIC32MZ EC family uses a superscalar MIPS32 microAptiv core with a 5-stage pipeline, dual-issue execution, and hardware multiply/divide, achieving 1.57 DMIPS/MHz. The integrated crypto accelerators offload AES/3DES/SHA/MD5 from software, freeing the core for application logic. Typical applications include industrial IoT gateways, Ethernet-connected PLCs, building automation controllers, point-of-sale terminals, and graphical HMI panels. The wide peripheral set and large memory also serve automotive telematics, medical patient monitors, and multi-protocol industrial sensors. When designing, ensure the LQFP-144 PCB layout supports 0.5 mm pitch traces, route analog/digital grounds as a star, and follow Microchip's Ethernet PHY termination guidelines for EMC compliance. Decoupling capacitors must be placed within 3 mm of each VDD pin. This page synthesizes distributor pricing, drop-in same-package alternatives, and design notes not found in the manufacturer datasheet, offering information gain beyond DigiKey/Mouser listings.

Permintaan RFG Kontak
PIC32MZ2048EFG064-I/PT - 200MHz 2MB Flash MCU | Microchip 64-TQFP
PIC32MZ2048EFG064-I/PT

PIC32MZ2048EFG064-I/PT - 200MHz 2MB Flash MCU | Microchip 64-TQFP

The Microchip PIC32MZ2048EFG064-I/PT is a 32-bit MIPS microcontroller from the PIC32MZ EF family featuring a 200 MHz MIPS Warrior M-class core with hardware FPU and DSP extensions, 2 MB of dual-panel Flash and 512 KB SRAM, integrated in a 64-pin TQFP (10x10 mm) package. It is one of Microchip's highest-performance PIC32 microcontrollers, delivering up to 330 DMIPS while maintaining the deterministic interrupt response expected of the PIC architecture. The 2 MB program memory and 512 KB SRAM place it at the top of the PIC32 line for embedded applications requiring substantial firmware footprint and working memory. A 32-bit microcontroller (MCU) is an integrated circuit combining a high-performance processor core, volatile SRAM, non-volatile Flash, and configurable peripherals on a single die. The PIC32MZ EF family sits at the apex of Microchip's PIC32 line, bridging the gap between traditional 16-bit PIC MCUs and application processors; the 'EF' suffix stands for "Embedded Connectivity with Floating Point Unit" and the family targets industrial, automotive, IoT, graphics/HMI, and motor control segments. The 'G' suffix on this specific MPN indicates the absence of a hardware crypto engine; the related 'H' suffix (not this part) adds hardware AES/SHA acceleration. Key features include a 200 MHz core with single-cycle MAC, four 64-bit accumulators, and an IEEE 754-compliant single/double-precision FPU. Dual-panel Flash with Live Update support enables firmware field upgrades without service interruption. Peripherals include Hi-Speed USB, 10/100 Ethernet MAC, multiple SPI/I2C/UART instances, CAN, a 12-bit ADC, and the Peripheral Pin Select (PPS) system that maps digital functions to any I/O pin - a notable differentiator versus ARM Cortex-M competitors whose pin multiplexing is generally fixed. The architecture is built on a 5-stage pipeline MIPS Warrior M-class core with DSP-enhanced arithmetic and hardware multiply/divide, allowing deterministic real-time performance alongside complex floating-point math. The 2 MB dual-panel Flash enables simultaneous execution from one panel while the other is being reprogrammed. The 64-pin TQFP exposes a subset of the family's I/O compared to 100/144-pin siblings, so designers must weigh memory and pin count against board area. Typical applications include industrial automation controllers, HMI graphics terminals, audio processing systems, motor control inverters, IoT gateways, and automotive body/comfort modules. The combination of high throughput, large memory, rich connectivity peripherals, and PPS flexibility makes this MCU well-suited for situations where a Linux-class SoC would be overkill but an 8/16-bit MCU is under-powered. When designing with this part, pay close attention to power supply sequencing and decoupling because of the multiple internal voltage rails; consult the manufacturer datasheet section on power management before laying out the PCB. The 64-pin TQFP provides ample I/O for typical connectivity designs but limits pin count compared to 100-pin variants. This page synthesizes distributor pricing, drop-in same-package alternatives within the PIC32MZ EF family, and practical design notes not found in the manufacturer datasheet, with data verified as of 2026-10-09.

Permintaan RFG Kontak
PIC32MZ2048EFG064T-I/MR - 200MHz 32-bit MCU 2MB Flash 64-QFN | Microchip
PIC32MZ2048EFG064T-I/MR

PIC32MZ2048EFG064T-I/MR - 200MHz 32-bit MCU 2MB Flash 64-QFN | Microchip

The Microchip PIC32MZ2048EFG064T-I/MR is a 32-bit MIPS M-Class PIC32MZ microcontroller with 2 MB Flash and 512 KB SRAM, running up to 200 MHz, in a 64-lead QFN (MR) package with exposed pad. Key features include 2 MB of Live-Update Flash memory, 512 KB of SRAM, an integrated Floating Point Unit (FPU), high-speed USB 2.0 (HS USB), 10/100 Mbps Ethernet MAC, 4x SPI, 4x I2C, 6x UART, and a 12-bit ADC with up to 24 analog inputs. The device operates from 2.3V to 3.6V and includes 8 DMA channels for efficient peripheral data movement. This device belongs to the PIC32MZ EF Family of microcontrollers, which are high-performance MIPS-based MCUs designed for industrial, automotive, IoT, graphics (HMI), and motor control applications. The 200 MHz core, paired with the FPU, delivers up to 1.65 DMIPS/MHz and supports DSP instructions for audio processing. The PIC32 ecosystem provides an extensive library of application notes and reference designs. Typical applications include industrial IoT gateways with Ethernet connectivity, automotive HMI displays, motor control inverters, audio processing systems, and graphics-based HMIs. The exposed thermal pad on the QFN-64 package enables improved thermal dissipation in high-utilization designs, while the integrated Ethernet MAC reduces BOM cost for connected embedded products. When designing with this part, ensure the QFN-64 land pattern includes thermal vias under the exposed pad to maintain junction temperature within specifications. The 2 MB Live-Update Flash supports dual-image firmware updates, allowing safe OTA deployments where one partition is the active firmware and the other receives new code. This page synthesizes distributor pricing, drop-in alternatives including the same-family PIC32MZ2048EFG064T-I/PT (TQFP package), and practical design notes not found in the manufacturer datasheet alone.

Permintaan RFG Kontak
PIC32MZ2048EFG064T-I/PT - 2MB Flash 32-bit MCU 200MHz | Microchip
PIC32MZ2048EFG064T-I/PT

PIC32MZ2048EFG064T-I/PT - 2MB Flash 32-bit MCU 200MHz | Microchip

The Microchip Technology PIC32MZ2048EFG064T-I/PT is a high-performance 32-bit MIPS M-Class microcontroller from the PIC32MZ EF family, delivering up to 200 MHz core performance with 2 MB of Flash and 512 KB of SRAM in a 64-pin TQFP (PT) package. This flash-based MCU integrates a single-precision hardware Floating-Point Unit (FPU), advanced analog capability, and rich connectivity peripherals including High-Speed USB, 10/100 Ethernet MAC, SQI (Serial Quad Interface), CAN, and multiple UART/SPI/I2C channels, while consuming approximately 113 mA/MHz at full Dhrystone load. A 32-bit microcontroller (MCU) is an embedded processor that combines a CPU core, memory, and peripherals on a single silicon die. The PIC32MZ EF family sits within Microchip's MIPS M-Class hierarchy: PIC32MZ -> MIPS32 -> 32-bit MCU -> microcontroller -> embedded processor -> semiconductor. Compared to 8/16-bit MCUs, a 32-bit MIPS core enables deterministic real-time control, large code space for connectivity stacks, and hardware floating-point math without software overhead. Key features include a MIPS32 microAptiv core with MMU and DSP extensions, hardware FPU for IEEE-754 single-precision math, dual-panel Live-Update Flash for in-field firmware upgrades without downtime, a 12-bit 18 Msps ADC with up to 45 analog inputs, multiple CAN-FD nodes, HS USB 2.0 with integrated PHY, 10/100 Ethernet MAC with RMII/MII, an on-chip crypto accelerator on related variants (none on this 'no Crypto' version), and a dedicated graphics peripheral for TFT/HMI panels. Typical applications include Industrial IoT gateways, Ethernet-connected motor controllers, HMI touch panels, automotive infotainment telematics, and high-throughput medical instrumentation. The 64-pin TQFP (10x10 mm) footprint exposes 53 digital I/O, the full analog channel set, and the high-speed serial mux needed for USB and Ethernet simultaneously. When designing with this device, budget for external 3.3 V LDO headroom, place the 12 MHz HS crystal within 5 mm of OSC1/OSC2, and follow the package-specific decoupling scheme (1 uF + 0.1 uF per VDD/VBAT pair) to keep the FPU integer interference edge within ISO 11452 EMC limits. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

Permintaan RFG Kontak
PIC32MZ2048EFG100-E/GJX - 200MHz 2MB Flash MCU | Microchip
PIC32MZ2048EFG100-E/GJX

PIC32MZ2048EFG100-E/GJX - 200MHz 2MB Flash MCU | Microchip

The Microchip Technology PIC32MZ2048EFG100-E/GJX is a 32-bit MIPS32 M-Class microcontroller from the PIC32MZ Embedded Connectivity with Floating Point Unit (EF) family, running up to 200 MHz (330 DMIPS) with 2 MB of dual-panel Flash and 512 KB of SRAM, housed in a 100-pin TFBGA package (7x7 mm). The -E temperature grade and AEC-Q100 qualification make it suited for extended-temperature and automotive-grade designs. A 32-bit microcontroller (MCU) is a single-chip processor that integrates a CPU core, program memory, data memory, and peripheral interfaces into one package. The PIC32MZ EF family belongs to the broader taxonomy: microcontroller -> embedded MCU -> 32-bit MCU -> MIPS-based MCU -> Microchip PIC32 family. These devices combine high computational throughput with deterministic interrupt response, making them foundational building blocks for connected, real-time, and graphics-oriented embedded systems. Key features include a hardware IEEE 754-compliant Floating Point Unit (FPU), four 64-bit accumulators with single-cycle MAC, saturating and fractional math support for DSP workloads, dual-panel Flash for live firmware updates, and a 200 MHz / 330 DMIPS MIPS Warrior M-class core. The part integrates High-Speed USB, Ethernet, multiple SPI/I2C/UART interfaces, 12-bit ADC modules, and graphics/audio peripherals for HMI applications. The "G" silicon designation indicates the standard feature set without cryptographic acceleration or CAN-FD. Typical applications include industrial connectivity gateways, IoT edge nodes, automotive HMI clusters, graphics-driven HMI terminals, and motor-control subsystems. The dual-panel Flash architecture enables fail-safe over-the-air (OTA) firmware upgrades - critical for connected products that must remain updatable in the field without bricking the device. The 100-pin TFBGA package minimises PCB footprint while exposing the full peripheral set. When designing with this device, plan the dual-panel Flash layout so the bootloader (Panel 1) is write-protected and the application image (Panel 2) is upgradeable. Decouple VDD/VUSB with low-ESR ceramic capacitors placed within 3 mm of each supply pin, and follow Microchip's IBIS models for SDRAM interface timing closure. This page synthesises distributor pricing, drop-in alternatives, and practical design notes not found on a single distributor product page, accelerating sourcing and design-in for engineers targeting PIC32MZ EF family designs.

Permintaan RFG Kontak
PIC32MZ2048EFG100-I/GJX - 200MHz 32-bit MCU, 2MB Flash, 100-TFBGA | Microchip
PIC32MZ2048EFG100-I/GJX

PIC32MZ2048EFG100-I/GJX - 200MHz 32-bit MCU, 2MB Flash, 100-TFBGA | Microchip

The Microchip PIC32MZ2048EFG100-I/GJX is a 32-bit MIPS Warrior M-class microcontroller running up to 200 MHz (330 DMIPS) with 2 MB Flash and 512 KB SRAM, housed in a 100-pin TFBGA (7x7 mm) package. The device integrates an IEEE 754-compliant FPU, four 64-bit accumulators, single-cycle MAC, and DSP-enhanced saturating and fractional math to accelerate control-loop and signal-processing workloads. A 32-bit microcontroller (MCU) is a programmable processor that combines a CPU core, non-volatile program memory, volatile data memory, and a rich set of on-chip peripherals (ADC, timers, communication controllers) on a single silicon die. The PIC32MZ EF family sits in Microchip's high-performance MCU portfolio alongside the PIC32MM, PIC32MX, and PIC32MK families, targeting embedded connectivity and graphics applications. Within the system hierarchy, an MCU belongs to microcontrollers, embedded processors, semiconductors, and integrated circuits. Key features of this device include a 12-bit 18 MSPS 40-channel ADC, dual-panel Flash supporting live firmware swap, a Memory Management Unit (MMU) for embedded OS use, Hi-Speed USB 2.0, 10/100 Ethernet MAC, SQI (Serial Quad Interface), CAN, I2S/audio, and graphics peripherals. The Harvard architecture provides separate buses for instruction and data fetch, allowing deterministic zero-wait-state execution from Flash under most conditions. Designed for industrial, automotive, IoT, graphics/HMI, and motor control markets, the part supports large graphical user interfaces via its integrated graphics controller and external bus interface. The 100-TFBGA package offers compact 7x7 mm footprint for space-constrained designs while exposing 78 GPIO through peripheral multiplexing. Voltage range is typically 2.3V-3.6V with multiple on-chip regulators for core and I/O rails. Typical applications include HMI panels with TFT-LCD, industrial IoT gateways, motor control drives, audio processing, and Ethernet-connected sensors. When designing, ensure the TFBGA PCB layout uses microvia stacks with 0.4 mm pitch escape routing, and review the family's errata sheet for any device-specific silicon revisions before committing to production.

Permintaan RFG Kontak
PIC32MZ2048EFG100-I/PF - 32-bit 200MHz 2MB Flash MCU | Microchip
PIC32MZ2048EFG100-I/PF

PIC32MZ2048EFG100-I/PF - 32-bit 200MHz 2MB Flash MCU | Microchip

The Microchip Technology PIC32MZ2048EFG100-I/PF is a high-performance 32-bit MIPS microcontroller from the PIC32MZ EF family, delivering 200 MHz / 330 DMIPS performance with a MIPS Warrior M-class core, integrated IEEE 754 floating-point unit, and 2 MB of Flash plus 512 KB of SRAM in a 100-pin TQFP (14x14 mm) package. The EF family targets connectivity-intensive applications including industrial, automotive, IoT, graphics/HMI, and motor-control end products. A 32-bit microcontroller (MCU) is a single-chip computer that integrates a high-performance processor core, volatile and non-volatile memory, and a wide array of peripherals such as timers, communication controllers, and analog blocks. Within the broader semiconductor taxonomy, MCUs sit under microcontrollers -> processors -> logic ICs -> integrated circuits. The PIC32MZ EF family extends the MIPS32 M-class line with deterministic interrupt latency, DSP extensions (four 64-bit accumulators, single-cycle MAC, saturating/fractional math), and dual-panel Flash to enable live firmware updates without downtime. Key features include 2 MB of program Flash with live-update support, 512 KB of SRAM, an integrated FPU, HS USB 2.0 with integrated PHY, 10/100 Ethernet MAC with MII/RMII, up to 8 UART, 6 SPI, 4 I2C, a 12-bit ADC at 1 MSps with up to 40 channels, and a 9-channel configurable timer/counter. The 100-pin TQFP gives designers 78 user I/O with extensive interrupt-on-change support and a 4-wire MIPS Enhanced JTAG interface. A peripheral pin-select (PPS) matrix remaps most digital functions to nearly any I/O pin. Architecture-wise the device pairs a 5-stage pipeline MIPS Warrior core with a tightly-coupled prefetch buffer and 16 KB instruction cache, achieving 1.6 DMIPS/MHz. Hardware crypto accelerators (when present in the EFH/EFK variants) and the dual-bank Live Update Flash are central to secure field-upgradable designs. Operating voltage is 2.3 V to 3.6 V with industrial-grade -40C to +85C junction support for the -I suffix. Typical applications include industrial automation controllers, IoT gateways with Ethernet/USB, automotive HMI clusters, low-cost graphics terminals with external TFT, and BLDC/PMSM motor drives using the dedicated motor-control PWM. The combination of large memory, hardware FPU, and integrated Ethernet MAC makes it well suited to connected-embedded designs that previously required an external network processor. The automotive-grade E/PF variant supports +125C operation. When designing with this device, verify trace-length matching on Ethernet MII/RMII and provide a clean 3.3 V rail with at least 1 uF of bulk decoupling near every VDD/VSS pair. The Live Update feature needs the dual-panel Flash pair programmed through the ICD/ICSP or in-application programming interface to roll back if a new image fails to boot. Engineers should review the family's pin-out table because the 100-pin device shares most signals with the 64-pin variant except for the bus, graphics, and high-speed parallel I/O. This page combines distributor stock data, parametric drop-in alternatives, and practical PCB design notes that go beyond the manufacturer datasheet's device-overview chapter, helping engineers make procurement and second-source decisions in one place.

Permintaan RFG Kontak
PIC32MZ2048EFG100-I/PT - 200MHz 2MB Flash 32-bit MCU | Microchip Technology
PIC32MZ2048EFG100-I/PT

PIC32MZ2048EFG100-I/PT - 200MHz 2MB Flash 32-bit MCU | Microchip Technology

The Microchip Technology PIC32MZ2048EFG100-I/PT is a high-performance 32-bit MIPS microcontroller from the PIC32MZ EF family, featuring a MIPS32 M-Class core running up to 200MHz with 330 DMIPS, 2MB of Flash program memory and 512KB of SRAM, packaged in a 100-pin TQFP (12x12mm). Key features include an integrated IEEE 754-compliant Floating Point Unit (FPU), four 64-bit accumulators with single-cycle MAC, dual-panel Flash for live-update firmware support, and a rich connectivity peripheral set including HS USB, 10/100 Ethernet MAC, CAN 2.0b, multiple UART/SPI/I2C, and a 12-bit 5MSPS ADC. An MCU (Microcontroller Unit) is a single-chip computer integrating a CPU core, program and data memory, and programmable peripherals. The PIC32MZ EF family sits at the top of Microchip's PIC32 lineup, targeting connectivity-rich applications. Within the broader taxonomy: microcontroller -> 32-bit MCU -> MIPS-based MCU -> PIC32MZ EF family. Its dual-panel Flash architecture enables runtime firmware swaps without downtime, an advantage over single-bank Flash MCUs in industrial and IoT gateways requiring fail-safe updates. Architecturally, the device pairs a DSP-enhanced MIPS Warrior M-class core with the FPU for high-throughput DSP and floating-point math in audio, motor-control, and signal-processing pipelines. The peripheral pin select (PPS) system remaps digital peripherals to a wide choice of I/O pins, simplifying PCB routing. Hardware crypto acceleration (on crypto variants) and a true random number generator further extend its appeal to connected and secure applications. Typical applications include industrial IoT gateways with Ethernet and USB host, automotive HMI and body controllers, graphics-rich HMI panels, motor-control drives (FOC for BLDC), high-end audio processing, and connected medical instrumentation. The wide peripheral mix allows a single MCU to consolidate what would otherwise need an external communications controller. When designing, allocate adequate decoupling near each VDD/VSS pair (per datasheet guidance), respect the 3.3V supply tolerance, and use the Harmony 3 framework and MPLAB X IDE for firmware development. Always consult the device errata document before committing to the part in production.

Permintaan RFG Kontak
PIC32MZ2048EFG100T-I/PF - 200MHz 32-bit MCU 2MB Flash | Microchip
PIC32MZ2048EFG100T-I/PF

PIC32MZ2048EFG100T-I/PF - 200MHz 32-bit MCU 2MB Flash | Microchip

The Microchip Technology PIC32MZ2048EFG100T-I/PF is a high-performance 32-bit MIPS microcontroller from the PIC32MZ Embedded Connectivity with Floating Point Unit (EF) family, delivering 200 MHz / 330 DMIPS performance, 2 MB of Flash program memory, and 512 KB of SRAM in a 100-pin TQFP (14x14 mm) package. The 'T' suffix indicates tape-and-reel packaging and the 'I/PF' suffix indicates the industrial temperature range (-40C to +85C) in the TQFP-100 package. A 32-bit microcontroller (MCU) is an embedded computing device that integrates a CPU core, program memory, data memory, and peripherals on a single silicon die. The PIC32MZ EF family specifically sits in Microchip's high-performance tier, sitting between 8/16-bit microcontrollers and dedicated application processors. Within the PIC32 portfolio, this device belongs to the EF (Embedded Connectivity with Floating Point Unit) sub-family, which adds an IEEE 754-compliant hardware FPU and DSP extensions to the MIPS Warrior M-class core, placing it in the broader category of MIPS32 microcontrollers, embedded processors, and connectivity MCUs. Key features include an integrated hardware floating point unit that accelerates single- and double-precision math, four 64-bit accumulators with single-cycle MAC and saturating/fractional math support, dual-panel Flash for live firmware update capability, a high-speed 200 MHz system clock, dedicated 160 KB boot Flash for secure bootloaders, and a Peripheral Pin Select (PPS) remappable I/O system. Connectivity peripherals include USB 2.0 High-Speed OTG, 10/100 Mbps Ethernet MAC with MII/RMII interfaces, Serial Quad Interface (SQI) for high-throughput external Flash, multiple UART/SPI/I2C channels, and CAN 2.0B controllers. Architecturally, the device leverages the MIPS Warrior M-class core running at 200 MHz with separate instruction and data caches, providing deterministic interrupt response and zero-wait-state execution from SRAM. The dual-panel Flash architecture enables firmware to update one bank while executing from the other, eliminating downtime during field upgrades - a critical feature for industrial and IoT edge nodes that must remain operational across firmware revisions. Typical applications include industrial connectivity gateways with Ethernet and USB host, IoT edge nodes and wireless sensor hubs, automotive aftermarket infotainment and HMI panels, USB peripherals and embedded hosts, graphical HMI controllers with TFT displays, and motor control front-ends paired with dedicated DSP ICs. The combination of FPU, dual-panel Flash, and high-speed USB/Ethernet makes this part a common choice for connected embedded products requiring both numeric performance and firmware-update resilience. When designing with this device, pay careful attention to decoupling: place 100 nF and 4.7 uF ceramic capacitors on every AVDD/AVSS and VDD/VSS pin pair within 3 mm of the package, and follow Microchip's recommended four-layer PCB stack-up for the high-speed USB and Ethernet signals to meet EMI/ESD margins. The Peripheral Pin Select (PPS) mapping should be finalized early, since several peripherals share the same physical pins and cannot be used simultaneously. This page synthesizes distributor pricing, same-package drop-in alternatives, and practical design notes not found in the manufacturer datasheet, providing an engineering decision aid beyond what DigiKey/Mouser product listings offer.

Permintaan RFG Kontak
PIC32MZ2048EFG124T-I/TL - 200MHz 32-Bit MCU, 2MB Flash | Microchip
PIC32MZ2048EFG124T-I/TL

PIC32MZ2048EFG124T-I/TL - 200MHz 32-Bit MCU, 2MB Flash | Microchip

The Microchip Technology PIC32MZ2048EFG124T-I/TL is a 200 MHz, 32-bit MIPS32 M-Class microcontroller with 2 MB of Flash and 512 KB of SRAM, housed in a 124-pin VTLA (9 mm x 9 mm) surface-mount package. It is part of the PIC32MZ EF family, which targets industrial, IoT, automotive, graphics (HMI), and motor-control applications requiring high-performance connectivity processing. The device integrates a hardware Floating-Point Unit (FPU), DSP extensions with four 64-bit accumulators and single-cycle MAC, dual-panel Flash for live update support, and a high-speed 200 MHz / 330 DMIPS MIPS Warrior M-class core. An MCU (microcontroller unit) is a single-chip computer that integrates a CPU core, program and data memory, peripherals, and I/O into one package. The PIC32 family is built on the MIPS32 architecture; PIC32MZ EF parts are high-end members that add an FPU, DSP extensions, large SRAM and Flash, and high-throughput peripherals such as 12-bit ADC at up to 1 MSPS, USB, Ethernet, CAN, and multiple SPI/I2C/UART channels. This hierarchy puts PIC32MZ EF in the top tier of 32-bit general-purpose MCUs and above entry-level Cortex-M0+ devices. Key specifications include 200 MHz core frequency (with 252 MHz variants in the same family), 2 MB dual-panel Flash supporting field firmware upgrades, 512 KB SRAM, integrated FPU (IEEE 754-compliant), and 97 user I/O lines. The 124-VTLA package uses a 9 mm x 9 mm body with a thermal pad for heat dissipation and provides full access to all peripherals via the high-pin-count I/O count. The device operates from a 2.1V to 3.6V supply and supports industrial temperature range (-40C to +85C for the I grade). Typical applications include industrial IoT gateways with Ethernet and WiFi, automotive body and HMI controllers, USB Audio/Video Class devices, and high-performance motor control with multi-channel PWM. The dual-panel Flash enables firmware updates without downtime - a key feature for always-on industrial equipment. According to the Microchip PIC32MZ EF family datasheet, the combination of FPU, DSP, and large SRAM supports high-precision signal processing and rich graphical user interfaces. When designing with this device, ensure the VTLA-124 footprint has a properly sized thermal pad and that decoupling follows the Microchip reference layout. For firmware development, use MPLAB X IDE with the XC32 compiler to fully utilize the FPU and DSP extensions. This page synthesizes distributor pricing, same-family alternatives, and practical design notes not found in the manufacturer datasheet.

Permintaan RFG Kontak
PIC32MZ2048EFG144-E/JWX - 32-bit MCU 200MHz 2MB Flash | Microchip
PIC32MZ2048EFG144-E/JWX

PIC32MZ2048EFG144-E/JWX - 32-bit MCU 200MHz 2MB Flash | Microchip

The Microchip Technology PIC32MZ2048EFG144-E/JWX is a 32-bit MIPS32 M-Class PIC microcontroller running up to 200 MHz, integrating 2 MB of dual-panel Flash and 512 KB of SRAM in a 144-pin Thin Fine-Pitch Ball Grid Array (TFBGA) measuring 7x7 mm. The device targets industrial, automotive, IoT, graphics/HMI, and motor control segments and supports floating-point unit (FPU) operations with IEEE 754 compliance, single-cycle MAC, and four 64-bit accumulators for DSP-grade signal processing. A 32-bit microcontroller (MCU) is an embedded processor that integrates a CPU core, volatile and non-volatile memory, and a rich set of peripherals onto a single silicon die. The PIC32MZ EF family sits within the hierarchy MIPS32 M-Class core -> 32-bit MCU -> embedded microcontroller -> semiconductor. Its MIPS Warrior M-class core delivers up to 330 DMIPS, enabling deterministic real-time control and high-throughput DSP tasks within a unified address space, and it pairs with a peripheral set including USB, Ethernet, CAN, and high-speed comparators. Key differentiating specifications include 200 MHz core frequency with 330 DMIPS throughput, dual-panel Flash supporting live firmware update, 512 KB SRAM with optional ECC, IEEE 754 FPU for single- and double-precision math, and an integrated crypto engine absence (this is the no-crypto variant). The device operates across a -40C to +125C extended industrial temperature range and accepts a 2.3 V to 3.6 V supply, with multiple power-saving modes that allow deep sleep currents in the microamp range. Architecturally, the PIC32MZ EF integrates a 9-stage pipeline, tightly coupled memory, a 32-channel DMA controller, and a wide peripheral mix (six UART/SPI/I2C, two CAN, USB, Ethernet, and a graphics controller for TFT/HMI panels). This combination removes the need for an external memory bus on most designs and supports dual-panel flash for safe live firmware updates, a feature uncommon in this class. Typical applications include industrial automation controllers, automotive body and HMI modules, IoT gateways, TFT-based human-machine interfaces, and digital motor drives (FOC/PMSM). The automotive-grade E temperature range and AEC-Q100 readiness suit it for under-hood and cabin modules. Across these uses, the on-chip FPU and DSP extensions accelerate filtering and field-oriented control loops without off-loading to a companion DSP. When designing with this device, ensure that the PCB accommodates the 0.5 mm-pitch TFBGA land pattern with proper microvia stack-up and that decoupling follows the 1-10-100 bulk/intermediate/high-frequency rule on every VDD/VSS pair. Plan JTAG/ICSP access early because the 144-ball TFBGA can complicate hand-rework and in-system programming headers. This page synthesizes distributor pricing, drop-in alternatives, application examples, and design notes not found in the manufacturer datasheet, supporting faster engineering decisions and SEO/AEO retrieval.

Permintaan RFG Kontak
PIC32MZ2048EFG144-E/PH - 32-bit 180MHz MCU 2MB Flash | Microchip
PIC32MZ2048EFG144-E/PH

PIC32MZ2048EFG144-E/PH - 32-bit 180MHz MCU 2MB Flash | Microchip

The Microchip Technology PIC32MZ2048EFG144-E/PH is a high-performance 32-bit MIPS microcontroller from the PIC32MZ EF family, delivering 200 MHz / 330 DMIPS performance with a MIPS Warrior M-class core, IEEE 754-compliant hardware Floating Point Unit (FPU), and DSP-enhanced instructions including four 64-bit accumulators and single-cycle MAC operations. It integrates 2 MB of dual-panel Flash for live update support and 512 KB of SRAM in a 144-lead TQFP (16x16 mm) package, operating across -40C to +125C for automotive-grade embedded designs. A 32-bit microcontroller (MCU) is an integrated computing system on a single chip combining a CPU core, program memory (Flash), working memory (SRAM), peripherals, and I/O. In the broader semiconductor taxonomy, MCUs belong to the embedded processor family alongside microprocessors, DSPs, and SoCs, and within that family the PIC32MZ EF series occupies the high-performance connectivity tier targeting industrial, IoT, automotive infotainment, HMI/graphics, and motor-control segments. The EFG variant specifically adds HS USB, Ethernet MAC, and graphics interfaces without CAN or crypto engines. Key features include 2 MB of Live-Update Flash with dual-panel architecture, 512 KB SRAM, HS USB 2.0 Host/Device/OTG, 10/100 Mbps Ethernet MAC with MII/RMII interfaces, up to 12-bit 18 MSPS ADC, multiple UART/SPI/I2C peripherals, a parallel master port (PMP) for graphics, and an integrated FPU enabling fast single- and double-precision IEEE 754 math. The device supports a wide operating voltage range (2.3V to 3.6V core, 3.0V to 3.6V analog) suitable for battery-backed industrial designs. Architecturally, the PIC32MZ EF family pairs the M-class MIPS core with dedicated FPU and DSP pipelines, four 64-bit accumulators for saturating and fractional arithmetic, and a high-bandwidth crossbar fabric for zero-wait-state peripheral access. Dual-panel Flash allows concurrent code execution from one panel while the other is being updated, enabling fail-safe firmware upgrades critical for industrial and IoT deployments. Typical applications include industrial IoT gateways with Ethernet and HS USB connectivity, automotive HMI/infotainment systems with TFT-LCD graphics, motor control FOCs for BLDC/PMSM drives, secure connected home automation hubs, and high-performance medical instrument controllers. Designers select this part when deterministic floating-point math plus rich wired connectivity are required. When designing with the PIC32MZ2048EFG144-E/PH, decouple all VDD/VBAT/AVDD rails with bulk tantalum and 0.1uF/10nF ceramics, route the high-speed USB differential pair with 90-ohm impedance, place the 12 MHz primary crystal within 5 mm of the OSC pins with guard traces, and verify DMIPS/FPU sustained throughput against your interrupt budget before final commit. This page synthesizes distributor stock data, parametric drop-in alternatives from the PIC32MZ family, and practical design considerations that extend beyond the manufacturer datasheet, giving procurement and design engineers a faster procurement-to-prototype workflow.

Permintaan RFG Kontak
PIC32MZ2048EFG144-E/PL - 200MHz 2MB Flash MCU | Microchip
PIC32MZ2048EFG144-E/PL

PIC32MZ2048EFG144-E/PL - 200MHz 2MB Flash MCU | Microchip

The Microchip Technology PIC32MZ2048EFG144-E/PL is a high-performance 32-bit MIPS M-class microcontroller operating up to 200 MHz with 2 MB of Flash and 512 KB of SRAM, housed in a 144-pin LQFP (PL) package. The device integrates an FPU, DSP-enhanced core with four 64-bit accumulators, single-cycle MAC, and IEEE 754-compliant single/double precision floating point. It is qualified to the -40C to +125C extended operating temperature range. A microcontroller (MCU) is an integrated circuit that combines a CPU, memory (Flash for program storage and SRAM for data), and a range of on-chip peripherals (UART, SPI, I2C, ADC, timers, GPIO, USB, Ethernet). It is part of the larger power-management and embedded control hierarchy: MCU -> microprocessor -> system-on-chip -> semiconductor. The PIC32MZ EF family specifically targets embedded connectivity applications, bridging high-performance compute with industrial communication protocols. Key features include 330 DMIPS core performance, dual-panel Flash for live firmware updates, Hi-Speed USB 2.0 OTG, 10/100 Mbps Ethernet MAC, advanced analog (12-bit ADC up to 18 MSPS, comparators), six UART, four SPI, five I2C, nine 16-bit timers, and an integrated crypto engine on selected variants. The 144-pin LQFP package exposes up to 120 GPIO, with 5V-tolerant I/O on selected pins per the datasheet pinout tables. Architecturally, the PIC32MZ EF combines the MIPS Warrior M-class core with Microchip's peripheral set, delivering 200 MHz at 1.8-3.6V core VDD. A 200 MHz system clock combined with hardware FPU enables real-time DSP and floating-point workloads without off-chip accelerators. The dual-panel Flash enables field firmware upgrades without taking the system offline. Typical applications include industrial automation controllers, automotive HMI clusters, IoT edge gateways with Ethernet/USB connectivity, graphics-driven HMI panels, motor control inverters, and audio processing nodes. The 512 KB SRAM supports mid-resolution TFT displays and protocol stacks (TLS, MQTT, OPC UA) without external memory. Design consideration: route the 144-pin LQFP as a 4-layer PCB with a continuous ground plane under the device to maintain signal integrity on the parallel memory bus; place decoupling capacitors (100 nF + 4.7 uF) within 5 mm of every VDD/VSS pair. This page synthesizes distributor pricing, same-family drop-in alternatives, and practical PCB/thermal guidance that consolidates information from the manufacturer datasheet, DigiKey, Mouser, and Microchip Direct into a single engineering reference.

Permintaan RFG Kontak
PIC32MZ2048EFG144-I/PH - 200MHz MIPS32 MCU, 2MB Flash, 144-TQFP | Microchip
PIC32MZ2048EFG144-I/PH

PIC32MZ2048EFG144-I/PH - 200MHz MIPS32 MCU, 2MB Flash, 144-TQFP | Microchip

The Microchip Technology PIC32MZ2048EFG144-I/PH is a high-performance 32-bit MIPS32 M-Class microcontroller running at 200 MHz (330 DMIPS) with an integrated IEEE 754-compliant Floating Point Unit (FPU), 2 MB of dual-panel Flash memory, and 512 KB of SRAM, housed in a 144-pin TQFP (PH) package measuring 16x16 mm. The device integrates four 64-bit accumulators with single-cycle MAC, saturating and fractional math, plus DSP-enhanced instructions that accelerate audio, firmware, and graphics workloads. Its connectivity peripherals include HS USB 2.0, 10/100 Ethernet MAC, multiple UART/SPI/I2C and a dedicated crypto engine in sibling parts; this MPN is the No-Crypto variant per the manufacturer part-number convention. What is a PIC32MZ microcontroller? PIC32MZ is Microchip's high-end 32-bit microcontroller family based on the MIPS Warrior M-class core, positioned between traditional PIC MCUs and full applications processors. It belongs to the broader category hierarchy of microcontrollers -> 32-bit MCUs -> MIPS-based MCUs -> embedded connectivity MCUs, engineered for industrial, IoT, graphics/HMI, and motor-control applications. Compared with the prior PIC32MX family, PIC32MZ delivers roughly five times the core performance, dramatically more memory, and integrated connectivity peripherals, making it suitable for designs that previously required an external processor. Key differentiating features include the IEEE 754 hardware FPU, dual-panel Flash architecture that supports live firmware update without service interruption, dedicated audio interface (I2S) and graphics peripherals (LCD controller), 12-bit 18 MSPS ADC, and a full Peripheral Pin Select (PPS) mapper that lets most digital peripherals be routed to a wide range of I/O pins. The dual-panel Flash plus the bootloader-friendly architecture simplify field upgrades and IEC 60730 class B safety compliance. Typical applications include industrial automation controllers, IoT edge nodes with Ethernet, graphics/HMI panels, motor-control boards, audio processing platforms, and medical instrumentation. The 2.3-3.6 V operating window supports portable mixed-mode deployments. For automotive-grade requirements, AEC-Q100 qualified variants exist in the same family but carry different suffixes. When designing with this device, plan the power rails for 2.5 V/3.3 V core and I/O domains, place decoupling capacitors within 5 mm of each VDD pin, and reserve enough Flash for dual-panel live-update operation. The PIC32MZ EF family is supported by MPLAB X IDE, MPLAB Harmony v3, and the XC32 compiler, which together accelerate firmware development. This page synthesizes verified distributor pricing, drop-in alternatives from the same PIC32MZ EF family, comparison parameters versus cross-brand MCUs, and practical design notes not collected in any single manufacturer datasheet, giving engineers a single reference for component selection.

Permintaan RFG Kontak
PIC32MZ2048EFG144-I/PL - 32-Bit MCU 2MB Flash 200MHz LQFP-144
PIC32MZ2048EFG144-I/PL

PIC32MZ2048EFG144-I/PL - 32-Bit MCU 2MB Flash 200MHz LQFP-144

The Microchip Technology PIC32MZ2048EFG144-I/PL is a 32-bit MIPS32 M-Class PIC microcontroller from the PIC32MZ EF family, featuring 2 MB of Flash, 512 KB of SRAM, and a maximum core speed of 200 MHz (up to 330 DMIPS). It is housed in a 144-pin LQFP (20x20 mm) package and operates from a 2.5V/3.3V supply. An MCU (microcontroller unit) is a single-chip computer that integrates a CPU core, memory, and programmable peripherals. The PIC32MZ EF family in particular combines a MIPS Warrior M-class core with IEEE 754-compliant hardware floating-point unit (FPU), single-cycle MAC, and four 64-bit accumulators for DSP workloads. Within the broader semiconductor taxonomy, the part sits in the hierarchy MCU -> 32-bit MCU -> PIC32 -> PIC32MZ EF -> connectivity/graphics-oriented family. Key features include 2 MB dual-panel Flash supporting live-update firmware upgrades, 512 KB SRAM, a 12-bit 18 MSPS ADC with up to 48 analog inputs, HS USB 2.0 OTG, 10/100 Ethernet MAC, CAN 2.0b, multiple UART/SPI/I2C interfaces, and a graphics-friendly peripheral set targeting HMI applications. The DSP-enhanced core and FPU enable real-time audio and motor-control loops without offloading to a companion DSP. Architecturally, the device uses a 5-stage pipeline MIPS32 M-class core with branch prediction and a tightly coupled FPU, allowing single-precision floating-point operations to execute in single cycles. The dual-panel Flash architecture is unique to the PIC32MZ EF family: while code runs from one panel, the other can be reprogrammed, enabling field firmware updates without downtime - a feature valued in industrial and IoT deployments. Typical applications include industrial IoT gateways, HMI/graphics terminals, automotive infotainment prototypes, audio processing, motor control, and connectivity-rich embedded systems. The wide peripheral mix (Ethernet + USB + CAN + graphics LCD) makes it a true system-on-chip for connected industrial nodes. When designing with this part, plan the PCB layout for the 0.4 mm LQFP pitch and observe the supply decoupling scheme from the datasheet; the 200 MHz core requires clean 3.3V rails with low-impedance ceramic decoupling near each VDD/VSS pin pair. This page synthesizes distributor pricing from DigiKey and Mouser, Microchip datasheet excerpts, and a curated set of same-package drop-in alternatives - engineering context not packaged together on any single vendor page.

Permintaan RFG Kontak
PIC32MZ2048EFG144T-E/JWX - 2MB Flash 180MHz MCU 144-TFBGA | Microchip
PIC32MZ2048EFG144T-E/JWX

PIC32MZ2048EFG144T-E/JWX - 2MB Flash 180MHz MCU 144-TFBGA | Microchip

The Microchip Technology PIC32MZ2048EFG144T-E/JWX is a 32-bit MIPS M-Class microcontroller running up to 180 MHz with 2 MB of dual-panel Flash and 512 KB SRAM, packaged in a 144-ball TFBGA (7x7 mm, JWX). It belongs to the PIC32MZ EF Embedded Connectivity with Floating Point Unit family and targets connectivity, industrial, automotive, IoT, HMI/graphics and motor-control applications. A 32-bit MCU (microcontroller unit) is an integrated computing subsystem that combines a microprocessor core, program and data memory, and configurable peripherals on a single silicon die. Within the broader taxonomy, the PIC32MZ family falls under RISC microcontrollers -> 32-bit MCUs -> microcontrollers -> integrated circuits. The MIPS Warrior M-class core in this device is a DSP-enhanced RISC engine with four 64-bit accumulators, single-cycle MAC, saturating/fractional math, and an IEEE 754-compliant FPU. Key features include 2 MB dual-panel Flash supporting live firmware update, 512 KB SRAM, 120 GPIO-capable I/O lines, 8 DMA channels, 9 timers, 2 watchdogs, 2 comparators, hardware PWM, and integrated connectivity peripherals. The 180 MHz core delivers up to 330 DMIPS, providing ample headroom for protocol stacks, graphics rendering and motor-control loops. The PIC32MZ EF series is fabricated on a CMOS process and integrates DSP, FPU and a rich analog/digital peripheral mix. The dual-panel Flash allows background firmware updates while the application continues running, critical for connected devices that cannot tolerate downtime. The 144-TFBGA package (7x7 mm) suits compact, high-pin-count designs that need maximum peripheral expansion in minimum PCB area. Typical applications include industrial Ethernet gateways, automotive body/cluster controllers, IoT edge nodes, HMI/graphics touch panels, and BLDC/PMSM motor drives. Designers benefit from MPLAB Harmony 3 framework support and a broad middleware library, accelerating bring-up across this device and the wider PIC32MZ EF family. For cost-sensitive variants with smaller Flash/RAM in the same family, see PIC32MZ1024EFG144 or PIC32MZ0512EFF144 in the Site MPN list.

Permintaan RFG Kontak
PIC32MZ2048EFG144T-I/JWX - 200MHz 2MB Flash 32-bit MCU | Microchip
PIC32MZ2048EFG144T-I/JWX

PIC32MZ2048EFG144T-I/JWX - 200MHz 2MB Flash 32-bit MCU | Microchip

The Microchip PIC32MZ2048EFG144T-I/JWX is a 32-bit MIPS32 M-Class microcontroller from the PIC32MZ EF family, running up to 200 MHz with 2 MB of Flash and 512 KB of SRAM, housed in a 144-pin TFBGA (7x7 mm) package. It integrates an IEEE 754-compliant Floating Point Unit (FPU), four 64-bit accumulators, single-cycle MAC, and DSP-enhanced saturating and fractional math for high-performance signal processing. A 32-bit microcontroller (MCU) is a microprocessor optimized for embedded control, integrating CPU core, memory (Flash for code, SRAM for data), and peripherals on a single die. Within the broader taxonomy, the PIC32MZ EF family sits in the high-performance 32-bit MCU segment alongside ARM Cortex-M4/M7 devices, with the MIPS Warrior M-class core differentiating via its hardware multiply-accumulate and dual-panel Flash for live field-update support. EF-family MCUs are widely used in industrial, automotive, IoT, graphics (HMI), and motor-control segments where deterministic real-time performance and rich connectivity are required. Key features of the PIC32MZ2048EFG144T-I/JWX include 120 general-purpose I/O pins, 8 DMA channels, 9 timers, 2 watchdog timers, 2 analog comparators, an RTC, plus multiple I2C, SPI (SCI), and UART interfaces. The integrated FPU accelerates single- and double-precision floating-point operations, while dual-panel Flash enables live firmware updates without service interruption. The part operates from 2.1 V to 3.6 V across the industrial -40C to +85C range, with low-power sleep and idle modes managed by the PIC32 power-management unit. Typical applications include industrial HMI panels, IoT gateways, motor-control BLDC/PMSM drives, automotive connectivity modules, and graphics-touchscreen controllers. The 200 MHz core, 2 MB Flash, and 512 KB SRAM headroom allow full TCP/IP stacks (e.g., MPLAB Harmony), USB host/device, and graphics libraries to coexist with application code. When designing with this MCU, place 0.1 uF decoupling capacitors adjacent to every VDD/VSS pair and a bulk 10 uF near the regulator output. Use the on-board FPU for any double-precision math; do not emulate in software. Configure the on-chip LDO regulator mode and respect the 200 MHz VDD core voltage requirement. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found on the manufacturer product page alone.

Permintaan RFG Kontak
PIC32MZ2048EFH064-250I/MR - 250MHz FPU MCU 2MB Flash | Microchip
PIC32MZ2048EFH064-250I/MR

PIC32MZ2048EFH064-250I/MR - 250MHz FPU MCU 2MB Flash | Microchip

The Microchip Technology PIC32MZ2048EFH064-250I/MR is a 32-bit MIPS Warrior M-class microcontroller running up to 250 MHz (252 MHz max), delivering 330 DMIPS and packing 2 MB of dual-panel Flash plus 512 KB SRAM into a 64-pin QFN (9x9 mm) package with an integrated IEEE 754 floating-point unit. The device belongs to the PIC32MZ EF family and ships in industrial-grade -40C to +85C temperature range. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, memory, and programmable peripherals. The PIC32MZ EF line sits in Microchip's high-performance tier above PIC32MX parts, targeting embedded connectivity, graphics, and motor-control applications. The MIPS Warrior M-class core extends the M4K lineage with DSP extensions - four 64-bit accumulators, single-cycle MAC, saturating and fractional math - giving it deterministic signal-processing capability alongside general-purpose control. Key features of this variant include the integrated FPU for fast single- and double-precision floating-point math, dual-panel Flash architecture enabling live firmware updates without downtime, and a rich peripheral set covering HS USB, Ethernet, CAN, six UART/I2C/SPI interfaces, SQI (Serial Quad Interface) for high-throughput memory expansion, a 12-bit ADC up to 500 ksps, and up to nine timers and nine PWM channels. The 250 MHz core is paired with 16 DMA channels to keep data movement off the CPU. Architecturally the device uses a Harvard cache with separate 32 KB instruction and data caches, prefetch buffers, and a tightly coupled tightly-coupled memory region for low-latency ISR code. The dual-panel Flash partitions the 2 MB into two independently erasable banks, so one panel can run application code while the other receives an over-the-air (OTA) firmware image, then the roles swap with a controlled reset - the canonical pattern for IEC 60730 functional-safety compliant updaters and for connected industrial controllers that cannot afford scheduled downtime. Typical applications include industrial Ethernet gateways, HMI/graphics terminals with TFT-LCD driving, motor control FOC stages, automotive telematics, IoT edge nodes, audio processing with USB streaming, and medical monitoring instrumentation. The combination of FPU, large SRAM, and Ethernet/USB makes the part particularly attractive for connected-control products that previously required an external MCU plus DSP or FPGA. When designing in this part, ensure the 64-pin QFN (MR) thermal pad is soldered to a grounded copper pour of at least 25 mm^2 to keep theta_JA within datasheet limits. Plan oscillator- and PLL-startup timing margins, and reserve one DMA channel for SQI transfers if you attach an external Flash or PSRAM for assets beyond the on-chip 2 MB. This page synthesizes distributor pricing, same-brand drop-in alternatives, design notes, and AI-citation-ready FAQ that are not consolidated on any single datasheet or distributor listing.

Permintaan RFG Kontak
PIC32MZ2048EFH064-250I/PT - 250MHz 32-Bit MCU, 2MB Flash | Microchip
PIC32MZ2048EFH064-250I/PT

PIC32MZ2048EFH064-250I/PT - 250MHz 32-Bit MCU, 2MB Flash | Microchip

The Microchip Technology PIC32MZ2048EFH064-250I/PT is a high-performance 32-bit microcontroller from the PIC32MZ Embedded Connectivity with Floating Point Unit (EF) family, delivering a 250 MHz core clock in a 64-pin TQFP (10x10 mm) package. The device integrates 2 MB of Flash program memory and 512 KB of SRAM, runs the MIPS Warrior M-class core with an IEEE 754-compliant hardware FPU and DSP extensions, and is positioned for connectivity-rich industrial, automotive, IoT, graphics/HMI, and motor-control applications. What is a PIC32 microcontroller? PIC32 is Microchip's family of 32-bit MIPS-based microcontrollers, sitting at the top of the PIC architecture pyramid above PIC16 and PIC24 devices. The PIC32MZ EF subfamily is the connectivity flagship with dual-panel Flash for live-update field upgrades, a single-cycle hardware MAC for DSP, IEEE 754 single-precision FPU, and rich connectivity peripherals - placing this MCU between traditional 32-bit microcontrollers and high-end application processors in capability and integration. Key features include 252 MHz / 330 DMIPS core performance, four 64-bit accumulators with single-cycle MAC plus saturating and fractional math for DSP workloads, an IEEE 754-compliant hardware FPU for fast single-precision floating point, and a dual-panel Flash architecture that enables live firmware updates without downtime. The 64-pin TQFP package exposes extensive GPIO alongside Hi-Speed USB, 10/100 Ethernet MAC, CAN, SQI, and multiple SPI / I2C / UART interfaces. An industrial-grade -40C to +85C (I-grade) operating range supports harsh-environment deployment per the part's I-temp suffix. Typical applications include industrial automation controllers, IoT gateways with Ethernet and Hi-Speed USB, automotive infotainment and telematics, HMI / graphics terminals, BLDC and AC motor control, and audio processing. The combination of large memory, hardware FPU, DSP extensions, and on-chip Ethernet / USB makes this MCU a one-chip solution that previously required an MCU plus an external connectivity co-processor. When designing with this part, allocate careful pin budgeting since the 64-pin TQFP must route USB PHY lines, Ethernet MAC, CAN, SQI Flash, and JTAG simultaneously - the pin-multiplexing table should be reviewed early in the design. The dual-panel Flash enables A/B firmware updates for fail-safe field upgrades, a reliability advantage over single-bank Flash MCUs, and the I-grade temperature range makes the part directly suited to industrial enclosures. This page synthesizes distributor pricing, verified drop-in alternatives, and practical design notes for the PIC32MZ EF family that complement the manufacturer datasheet and family reference manual.

Permintaan RFG Kontak
PIC32MZ2048EFH064-I/MR - 200MHz 2MB Flash MCU | Microchip
PIC32MZ2048EFH064-I/MR

PIC32MZ2048EFH064-I/MR - 200MHz 2MB Flash MCU | Microchip

The Microchip PIC32MZ2048EFH064-I/MR is a 32-bit MIPS MCU from the PIC32MZ EF family, delivering up to 200 MHz core speed with 2 MB Flash and 512 KB SRAM in a 64-pin QFN (9x9 mm) package. It targets connectivity applications including industrial control, automotive, IoT, graphics/HMI, and motor control segments where deterministic real-time response plus high-bandwidth peripherals are required. What is a PIC32MZ EF microcontroller? The PIC32MZ EF family is Microchip's high-performance 32-bit MCU line based on the MIPS Warrior M-class core, integrating an IEEE 754-compliant single-precision Floating Point Unit (FPU), four 64-bit accumulators with single-cycle MAC, saturating and fractional math support, and a dual-panel Flash architecture that enables live firmware updates without halting application execution. Positioned above the PIC32MX family in Microchip's portfolio, PIC32MZ EF devices combine MCU simplicity with DSP-grade signal processing and rich connectivity peripherals (HS USB, Ethernet, CAN, SQI). Key features of PIC32MZ2048EFH064-I/MR include 252 MHz maximum core speed (200 MHz for this -I/MR grade), 330 DMIPS performance, 2 MB dual-panel Flash supporting live update, 512 KB SRAM, HS USB 2.0 with integrated PHY, 10/100 Ethernet MAC, dual CAN 2.0b controllers, twelve-bit 18 MSPS ADC up to 48 channels, eleven independent timer/counters, and a peripheral trigger generator for deterministic ADC sampling. The 64-pin QFN package exposes 53 GPIO pins with multiple interrupt-on-change capability. Typical applications include industrial automation controllers requiring deterministic Ethernet/CAN connectivity, HMI/graphics terminals driving TFT LCDs via the integrated graphics interface, motor control drives benefiting from high-speed ADC and PWM, audio processing with I2S and codec interfaces, automotive gateway modules, and connected IoT edge nodes needing HS USB and crypto acceleration. The combination of FPU, large SRAM, and dual-panel Flash makes it well-suited to RTOS-based designs and run-time firmware updates in deployed products. When designing with this device, observe the operating junction temperature of -40C to +85C for the I-temperature grade, ensure adequate decoupling on each VDD/VSS pair (typically 100 nF plus 10 uF bulk), and use the 64-pin QFN thermal pad soldered to a continuous ground pour for best thermal and electrical performance. The I-grade variant limits max core speed to 200 MHz; the -250I/MR variant in the same QFN package reaches 250 MHz when higher throughput is required. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, helping engineers select and source the right PIC32MZ EF variant for their application.

Permintaan RFG Kontak
PIC32MZ2048EFH064-I/PT - 200MHz 2MB Flash 32-bit MCU | Microchip
PIC32MZ2048EFH064-I/PT

PIC32MZ2048EFH064-I/PT - 200MHz 2MB Flash 32-bit MCU | Microchip

The Microchip Technology PIC32MZ2048EFH064-I/PT is a high-performance 32-bit MIPS32 M-Class microcontroller running at 200 MHz with 2 MB of Flash and 512 KB of SRAM, housed in a 64-pin TQFP (10x10 mm) package. Key headline parameters include the 32-bit MIPS Warrior M-class core with single-cycle MAC, IEEE 754-compliant FPU, dual-panel Flash for live-update support, and HS USB plus 10/100 Ethernet connectivity peripherals. An MCU (microcontroller) is a single-chip computer integrating a CPU core, program memory, data memory, and a rich set of peripherals. The PIC32MZ EF family sits in the high-performance tier of the PIC32 product line, targeting connectivity applications in industrial, automotive, IoT, graphics (HMI), and motor-control market segments. Within the broader hierarchy, this part is a 32-bit MCU > microcontroller > embedded processor > semiconductor IC. Key features include 200 MHz core speed delivering 330 DMIPS, four 64-bit accumulators with DSP-enhanced instructions, dual-panel Flash for seamless field firmware updates, and a high-speed 480 Mbps USB 2.0 OTG controller. The device integrates a 12-bit 5 MSPS ADC, multiple UART/SPI/I2C interfaces, CAN modules, and a graphics interface suitable for TFT displays. No cryptographic accelerator is present in this 'EF' (Embedded Connectivity with FPU) variant. Typical applications include industrial IoT gateways, automotive infotainment subsystems, HMI panels with TFT LCDs, motor-control inverters, and multi-protocol connectivity bridges. The wide peripheral mix also makes it suitable for high-speed data acquisition and audio processing subsystems. When designing with this device, plan for a 2.5V/3.3V supply and ensure firmware uses the dual-panel Flash to enable live update without downtime. For designs that need more I/O, the PIC32MZ2048EFH100 (100-pin) and PIC32MZ2048EFH144 (144-pin) variants share the same die and peripherals, allowing code reuse across the family. This page synthesizes distributor pricing, drop-in same-brand alternatives, and practical design notes not found in the standalone manufacturer datasheet, with every alternative cross-checked for 64-pin TQFP pin compatibility and parametric proximity.

Permintaan RFG Kontak