Produk (22.000+)

ATSAML21J18B-UUT - 256KB Flash Cortex-M0+ MCU | Microchip
ATSAML21J18B-UUT

ATSAML21J18B-UUT - 256KB Flash Cortex-M0+ MCU | Microchip

The Microchip ATSAML21J18B-UUT is an ultra-low-power 32-bit ARM Cortex-M0+ flash microcontroller operating up to 48 MHz, delivering 2.46 CoreMark/MHz while consuming under 35 uA/MHz in active mode and only 200 nA in Sleep mode. It integrates 256 KB of Flash and 40 KB of SRAM in a 64-ball WLCSP package, and operates from a 1.6 V to 3.6 V supply across the industrial temperature range of -40C to +85C. According to the Microchip SAM L21 family datasheet, the device is the highest-density variant of the SAM L21J WLCSP64 line and provides sophisticated power management through power domain gating, SleepWalking, and ultra-low-power peripherals. A microcontroller (MCU) is an integrated circuit containing a processor core, program and data memory, and programmable peripherals. ARM Cortex-M0+ cores target the lowest active power and smallest die area among the Cortex-M family, making them ideal for battery-powered embedded systems. Within that hierarchy the SAM L21 sits in Microchip's ultra-low-power tier alongside the SAM L11 secure family and the SAM D20/D21 mainstream tier, all built around the same ARM Cortex-M0+ instruction set. This particular J18B-UUT part is the WLCSP64 package variant - WLCSP (Wafer Level Chip Scale Package) is the smallest-footprint option of the SAM L21J family and is intended for space-constrained wearables and sensor nodes. Key features include a 12-bit 1 MSPS ADC, a 10-bit DAC, four SERCOM channels that can each be configured as USART, I2C, or SPI, and a 32-bit RTC with calendar mode. Power management is the central design pillar: SleepWalking lets peripherals wake the CPU only when relevant events occur, while six flexible power domains allow unused logic to be powered down at run time. The 64-ball WLCSP package has a footprint of approximately 3.0 x 3.0 mm and a height under 0.5 mm, allowing direct attachment to a top-side PCB layer with minimal inductance. The architecture pairs the Cortex-M0+ core with a 4-channel event system and a Peripheral Touch Controller (PTC) supporting capacitive touch sensing. The 12-bit ADC achieves up to 1 MSPS at full resolution and 2 MSPS at 8-bit resolution, providing enough bandwidth for sensor fusion and audio preprocessing. A hardware cryptographic module is not present on this family - it is delegated to the SAM L11 tier - so security-sensitive designs should add an external secure element. Typical applications include battery-powered IoT sensor nodes, wearable fitness and health devices, smart metering, home automation endpoints, and industrial wireless sensor transmitters. The combination of Cortex-M0+ performance, 256 KB of Flash for application code, and SleepWalking peripheral architecture keeps the average system current below 1 mA in many typical duty-cycled scenarios. When designing with this device, prioritize sleep-mode current draw as your primary figure of merit; idle power dominates battery life more than active throughput. The WLCSP64 footprint requires PCB pad design rules substantially different from QFP or QFN packages - the recommendation is non-solder-mask-defined (NSMD) pads with a diameter roughly 0.4 mm and a pitch matching the package balls. Reference the Microchip SAM L21 WLCSP64 land pattern application note for exact stack-up recommendations. This page synthesizes distributor pricing, drop-in compatible alternatives from Microchip's SAM L21 family, and practical PCB/thermal design notes that are not collected in the manufacturer datasheet.

Permintaan RFG Kontak
ATSAML22G16A-AUT - SAM L22G 32MHz Cortex-M0+ 64KB MCU | Microchip
ATSAML22G16A-AUT

ATSAML22G16A-AUT - SAM L22G 32MHz Cortex-M0+ 64KB MCU | Microchip

The Microchip Technology ATSAML22G16A-AUT is an ultra-low-power 32-bit ARM Cortex-M0+ microcontroller from the SAM L22G family, featuring 64KB of Flash, 8KB of SRAM, and a 32MHz maximum CPU clock, housed in a 48-pin TQFP (7x7 mm) package. It is designed for battery-powered and energy-harvesting applications where active-mode efficiency and deep-sleep current are critical design constraints. An ultra-low-power microcontroller (MCU) is a class of embedded processor that combines a CPU core, non-volatile memory (Flash), volatile memory (SRAM), and a rich set of peripherals into a single IC, optimized to minimize energy consumption across active, idle, and sleep states. The Cortex-M0+ is ARM's smallest and most energy-efficient application processor core, and the SAM L22 family extends this efficiency with Microchip's proprietary power-management techniques. Within the broader taxonomy, this device is a 32-bit microcontroller, a sub-category of microcontrollers and embedded processors, falling under the Integrated Circuits > Microcontrollers category. Key features include a Cortex-M0+ core running up to 32MHz, 64KB Flash for application code, 8KB SRAM for runtime data, an integrated 32kHz RTC and Segment LCD controller, and a wide operating voltage range of 1.62V to 3.63V. The device operates at 39 uA/MHz in active mode running CoreMark, and drops to as low as 490nA in ultra-low-power backup mode with RTC retention. It supports multiple low-power modes including Sleep, Standby, Backup, and Off, and provides a Segment LCD driver for glass displays up to 8 common segments. The SAM L22 architecture combines an efficient ARM Cortex-M0+ pipeline with Microchip's Peripheral Event System and Sleepwalking peripherals, allowing the CPU to remain asleep while DMA-driven events handle sensor sampling and GPIO wakeups. An integrated 32kHz oscillator, full-speed USB 2.0 device, and Segment LCD controller further reduce external component count. The 48-pin TQFP package exposes multiple SERCOM, ADC, and touch-capable I/O lines, supporting a wide range of mixed-signal interfaces. Typical applications include battery-powered sensor nodes, wearable health and fitness devices, smart thermostats and home automation, industrial IoT edge nodes, metering and instrumentation displays with built-in LCD support, and ultra-low-power wireless sensor end-nodes. The integrated Segment LCD controller makes it particularly well suited to products with a user-facing glass display that must run for years on a single coin cell. When designing with this device, ensure that the supply rail is decoupled with at least one 100nF ceramic capacitor placed within a few millimetres of the VDD pins, and that the Segment LCD bias network is sized per the display manufacturer's recommended glass capacitance. Designers should evaluate the trade-off between using the integrated 32kHz crystal oscillator versus an external 32.768kHz crystal when RTC accuracy is critical to the application. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, organized to support component selection, PCB layout, and supply-chain risk analysis for engineers working on low-power embedded designs.

Permintaan RFG Kontak
ATSAML22G16A-MUT - 32MHz Cortex-M0+ MCU 64KB Flash | Microchip
ATSAML22G16A-MUT

ATSAML22G16A-MUT - 32MHz Cortex-M0+ MCU 64KB Flash | Microchip

The Microchip Technology ATSAML22G16A-MUT is an ultra-low-power 32-bit ARM Cortex-M0+ microcontroller from the SAM L22 family, featuring 64KB of Flash and 8KB of SRAM in a 48-pin QFN (7x7 mm) package with an exposed pad for thermal dissipation. It operates from 1.6V to 3.6V with a 32MHz maximum CPU clock, integrates an AES 256-bit crypto engine, and delivers 39 µA/MHz active current with CoreMark benchmarking while dropping to 490 nA in ultra-low-power backup mode with RTC retention. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, memory, and programmable peripherals. The SAM L22 family sits in Microchip's ultra-low-power MCU portfolio, optimized for battery-powered and energy-harvesting applications. The Cortex-M0+ core is the smallest and most energy-efficient ARM core, making it the right choice when deterministic real-time response and long battery life outweigh raw computational throughput. The SAM L22 belongs to the power management MCU segment, sitting hierarchically between 8-bit MCUs (e.g., PIC16) and higher-end Cortex-M4/M7 families (e.g., SAME70). Key features include segmented LCD support (up to 8x40 segments with on-chip charge pump), a 12-bit ADC with oversampling, multiple SERCOM interfaces configurable as UART/SPI/I2C, a full-speed USB 2.0 device/host with embedded PHY, an ISO 7816 smart-card interface, and an integrated PTC (Peripheral Touch Controller) for capacitive touch sensing. The device is AEC-Q100 qualified, making it automotive-ready. Architecturally, the SAM L22 uses an event-driven SERCOM system and SleepWalking peripherals that allow the CPU to remain in deep sleep until a peripheral triggers an interrupt, dramatically reducing system-level power. The 39 µA/MHz active figure and 490 nA backup figure are enabled by dedicated low-power voltage regulators and an ultra-low-power RTC on a separate power domain. Typical applications include IoT sensor nodes, smart metering, wearable fitness bands, electronic shelf labels, industrial HMI with LCD, automotive body controllers, and battery-powered medical devices such as glucose meters. Designers should consider this MCU when sub-1 µA standby current and segment-LCD support are required without moving to a Cortex-M4 class device. This page consolidates distributor pricing, drop-in package alternatives, and practical design notes not found in the manufacturer datasheet alone.

Permintaan RFG Kontak
ATSAML22G17A-AUT - ARM Cortex-M0+ 32MHz 128KB MCU | Microchip
ATSAML22G17A-AUT

ATSAML22G17A-AUT - ARM Cortex-M0+ 32MHz 128KB MCU | Microchip

The Microchip Technology ATSAML22G17A-AUT is an ultra-low-power 32-bit ARM Cortex-M0+ Flash microcontroller (MCU) from the SAM L22 family, integrating 128KB of Flash and 16KB of SRAM, and housed in a 48-pin TQFP (7x7 mm) package rated for industrial temperature operation. It operates from a wide 1.62V to 3.6V supply and runs the Cortex-M0+ core at up to 32 MHz, achieving 2.46 CoreMark/MHz while consuming only 39 uA/MHz in active mode. What is an ARM Cortex-M0+ microcontroller? The Cortex-M0+ is ARM's smallest and most energy-efficient application processor core, designed for deeply embedded applications that demand deterministic real-time behaviour, low power, and minimal silicon cost. It belongs to the broader category of microcontrollers (MCU), which themselves are single-chip computers containing CPU, memory, and peripherals. The SAM L22 family specifically targets ultra-low-power IoT and battery-backed sensor applications by adding sophisticated power domains such as Backup mode (490 nA with RTC running), a separate RTC domain, and on-chip segmented LCD support. Key features include 128KB Flash, 16KB SRAM, a 12-bit 1 Msps ADC, a 16-bit Sigma-Delta ADC, up to 36 GPIO, segment LCD controller, multiple SERCOM (UART/SPI/I2C) interfaces, a full-speed USB device with embedded transceiver, hardware AES, capacitive touch (PTC) peripheral, and a Real-Time Clock with calendar. Industrial-grade operating range of -40C to +85C is provided by the AUT suffix. The integrated segment LCD controller and PTC make it differentiated from generic Cortex-M0+ parts by supporting human-machine interfaces and touch UI on a single chip. Architecture-wise, the SAM L22G uses a Harvard-bus Cortex-M0+ core with a single-cycle hardware multiplier, NVIC with 4 priority levels, and Microchip's Event System for inter-peripheral signalling without CPU intervention. Advanced power management is provided through Sleep, Idle, Standby, and Backup modes, with the Backup mode consuming only 490 nA while retaining 8KB of backup SRAM and the RTC. A built-in 32 kHz crystal oscillator and 8 MHz DFLL allow precise low-jitter clocking for sensor and metering applications. Typical applications include ultra-low-power IoT sensor nodes, battery-operated medical wearables, smart utility meters with segment LCD, capacitive touch human-machine interfaces, USB peripherals, industrial sensor transmitters, and remote controls. When designing with this MCU, prioritize using Backup mode with RTC wake for battery life optimization, and ensure that the LCD bias generation capacitors and segment pin assignments match the target glass to avoid ghosting artifacts.

Permintaan RFG Kontak
ATSAML22G17A-MUT - 32MHz Cortex-M0+ MCU 128KB Flash | Microchip
ATSAML22G17A-MUT

ATSAML22G17A-MUT - 32MHz Cortex-M0+ MCU 128KB Flash | Microchip

The Microchip Technology ATSAML22G17A-MUT is an ultra-low-power 32-bit ARM Cortex-M0+ microcontroller (MCU) from the SAM L22 family, featuring 128KB of Flash and 16KB of SRAM in a 48-pin QFN (7x7) package. It operates from a 1.6V to 3.6V supply at a 32MHz CPU clock and integrates Full-Speed USB, a segment LCD controller, and multiple low-power modes that drop active consumption to 39 uA/MHz (CoreMark) and standby consumption to 490 nA in ultra-low-power backup mode with RTC retention. An ARM Cortex-M0+ microcontroller is a 32-bit RISC processor core designed by Arm that delivers higher code density and energy efficiency than 8/16-bit cores while maintaining a low gate count. It sits within the broader hierarchy of microcontroller -> embedded processor -> SoC -> semiconductor. Microchip's SAM L22 family targets battery-powered and energy-harvesting applications by combining a Cortex-M0+ core with sophisticated power management technologies, on-chip peripherals, and segment LCD driving capability. Key features include the Cortex-M0+ core with single-cycle hardware multiply, 128KB Flash, 16KB SRAM, a 12-bit ADC, multiple SERCOM interfaces configurable as UART/SPI/I2C, Full-Speed USB 2.0 with device and host modes, a segment LCD controller (up to 4x40 segments), and an Event System for peripheral-to-peripheral signalling without CPU involvement. The 48-QFN package integrates an exposed pad for improved thermal dissipation and board-level grounding. The SAM L22 architecture pairs the Cortex-M0+ core with a low-leakage process technology and a dedicated SleepWalking peripheral set. Power domains can be gated independently so SERCOM, ADC, or timer activity does not wake the CPU unless required. This makes the device well-suited for always-on sensor reading, smart-metering, and wearable designs that demand years of battery life. Typical applications include battery-powered IoT sensor nodes, smart thermostats and metering devices, wearable health monitors, remote controls, segment-LCD user-interface panels, USB peripherals, and industrial sensor hubs. The integrated segment-LCD controller eliminates an external driver IC, reducing both BOM cost and PCB area for any product that needs a numeric or alphanumeric display. When designing with this device, plan power-rail sequencing carefully because the SAM L22 has separate AVDD/VDDIO/VDDIN rails. Use a 1uF X7R ceramic decoupling capacitor on each supply pin placed as close to the IC as possible, and provide a USB- compliant 1uF capacitor on VBUS when the USB peripheral is used. Refer to Microchip application notes for low-power firmware patterns and segment-LCD bias generation. This page synthesizes distributor pricing from DigiKey and Mouser, drop-in alternatives from the SAM L22 family and the Sitel MPN cross-reference, and practical design notes that go beyond what is printed in the manufacturer datasheet.

Permintaan RFG Kontak
ATSAML22G18A-AUT - 32MHz Cortex-M0+ MCU 256KB Flash | Microchip
ATSAML22G18A-AUT

ATSAML22G18A-AUT - 32MHz Cortex-M0+ MCU 256KB Flash | Microchip

The Microchip Technology (formerly Atmel) ATSAML22G18A-AUT is an ultra-low-power ARM Cortex-M0+ flash microcontroller (MCU) in the SAM L22G family, featuring 256KB of Flash and 32KB of SRAM in a 48-pin TQFP (7x7 mm) package rated for the automotive -40C to +85C temperature range. It integrates a 32-bit Cortex-M0+ core running up to 32 MHz, sophisticated power management that consumes 39 uA/MHz in active CoreMark mode and drops to 490 nA in ultra-low-power backup mode with RTC retention. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), working memory (SRAM), and a rich set of peripherals into one device. Within the broader semiconductor taxonomy, the ATSAML22G18A-AUT belongs to the hierarchy: microcontroller -> embedded MCU -> ARM Cortex-M microcontroller -> ultra-low-power MCU -> 32-bit Cortex-M0+ MCU. It is part of Microchip's SAM L family, which is optimized for battery-powered IoT, wearable, and energy-harvesting designs where every microamp matters. Key differentiating features include Segment LCD support (up to 8x40 segments), a 12-bit 1 Msps ADC, two I2C, up to six SERCOM-configurable serial interfaces, a Full-Speed USB 2.0 device port, and a parallel crypto accelerator supporting AES, SHA, and True Random Number Generator. The device also includes a high-precision 32.768 kHz RTC reference, multiple low-power modes (Idle, Standby, Backup, Off), and Event System for inter-peripheral signaling without CPU intervention. The ATSAML22G18A-AUT is manufactured on a low-leakage CMOS process and uses Microchip's proprietary picoPower technology for active and sleep power reduction. Compared to general-purpose Cortex-M0+ MCUs, the SAM L22G adds integrated LCD drivers, hardware crypto, and USB FS, allowing a single chip to drive displays, secure communications, and PC connectivity in space-constrained designs. Typical applications include battery-powered IoT sensor nodes, wearable fitness and medical monitors, smart energy meters with LCD readouts, electronic shelf labels, home automation gateways, industrial HMI with segment LCDs, and automotive body controllers operating within the -40C to +85C range. Designers choose this part when they need a balance of low active current, deep-sleep nanoampere backup modes, integrated LCD, and AEC-Q100-friendly temperature tolerance. When designing with the ATSAML22G18A-AUT, ensure that the LDO/BUCK regulator pins are properly bypassed with 100 nF + 4.7 uF ceramic capacitors as shown in the reference design, and that the Segment LCD bias network uses Microchip's recommended charge-pump capacitor values. The Backup domain requires a 32.768 kHz crystal or external clock source for RTC operation, and the AES/SHA hardware crypto key storage should be locked via the BKUPCFG register before deployment.

Permintaan RFG Kontak
ATSAML22G18A-MUT - 32MHz ARM Cortex-M0+ 256KB MCU | Microchip
ATSAML22G18A-MUT

ATSAML22G18A-MUT - 32MHz ARM Cortex-M0+ 256KB MCU | Microchip

The Microchip Technology (formerly Atmel) ATSAML22G18A-MUT is an ultra-low-power 32-bit ARM Cortex-M0+ microcontroller delivering 32MHz CPU performance with 256KB Flash and 32KB SRAM in a 48-pin VQFN-EP (7x7 mm) package. As part of the SAM L22G family, it integrates an on-chip segment LCD controller with up to 8x32 segments, making it purpose-built for battery-powered metering, wearable, and segment-LCD display applications. What is a SAM L22 microcontroller? The SAM L22 family sits within Microchip's broader SAM lineup of 32-bit ARM Cortex microcontrollers. A microcontroller (MCU) is a single-chip computer integrating a CPU core, Flash program memory, SRAM data memory, and programmable peripherals. The L22 sub-family is differentiated by its ultra-low-power architecture, segment LCD driver, and Cortex-M0+ efficiency - aimed at deeply embedded applications that must run for years on a single coin cell. In the system hierarchy it occupies the power-management-aware edge of the IoT device spectrum: MCU -> ultra-low-power MCU -> segment LCD MCU -> SAM L22 family. Key differentiating specifications include 39 uA/MHz active current running CoreMark, 490 nA ultra-low-power backup mode with RTC retention, integrated 16-channel 12-bit ADC, four SERCOM interfaces (configurable as I2C/SPI/UART), full-speed USB device with internal pull-up, and a segment LCD controller supporting up to 8x32 segments. The Cortex-M0+ core delivers 0.9 DMIPS/MHz with single-cycle I/O access and an MPU for memory protection. Architecturally, the device uses a Harvard-style bus matrix with separate AHB/APB domains, SleepWalking peripherals that wake only on configured events, and event system for zero-CPU peripheral-to-peripheral signaling. The 32MHz operation is sourced from an internal 32.768kHz oscillator and PLL, eliminating external crystals in many designs. Operating voltage spans 1.6V to 3.6V across -40C to +85C industrial range. Typical applications include battery-powered flow and gas meters, wearable health monitors with segment LCD displays, smart thermostats, electronic shelf labels, IoT sensor nodes with USB diagnostic port, and industrial HMI panels. The on-chip LCD driver eliminates the need for an external segment-driver IC. When designing with this part, route the segment LCD pins as a dedicated bus to minimize crosstalk, place the decoupling capacitor within 2mm of VDDIN, and verify the backup domain RTC crystal load capacitance to achieve the 490 nA standby target. The page synthesizes distributor pricing, drop-in alternatives from the SAM L22 family, and practical design notes not found in the manufacturer datasheet.

Permintaan RFG Kontak
ATSAML22J17A-MUT - ARM Cortex-M0+ MCU 128KB Flash 64-QFN | Microchip
ATSAML22J17A-MUT

ATSAML22J17A-MUT - ARM Cortex-M0+ MCU 128KB Flash 64-QFN | Microchip

The Microchip Technology ATSAML22J17A-MUT is an ultra-low-power 32-bit ARM Cortex-M0+ flash microcontroller from the SAM L22 family, offering 128KB of Flash memory and 32MHz CPU speed in a 64-pin QFN (9x9) surface-mount package. Designed for energy-sensitive IoT and battery-powered applications, the device consumes only 39 µA/MHz in active CoreMark operation and drops to as low as 490 nA in ultra-low-power backup mode with RTC running. The wide 1.6V to 3.6V supply range supports single-cell Li-ion and 3.3V system designs. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, memory (Flash and SRAM), and a rich set of peripherals such as timers, communication interfaces, ADCs, and GPIO into one package. It belongs to the hierarchy of embedded processors -> microcontrollers -> ARM Cortex-M0+ MCUs -> ultra-low-power microcontrollers -> power-managed edge-node MCUs. Cortex-M0+ parts target deterministic, energy-efficient control tasks in cost-constrained products and typically replace 8-bit and 16-bit MCUs while running the ARM Thumb instruction set. Key features of the ATSAML22J17A-MUT include the Cortex-M0+ core at 32MHz (2.46 CoreMark/MHz), 128KB Flash with ECC, 16KB SRAM, 32KB of EEPROM-like Flash (RWWEE), a 12-bit ADC, multiple SERCOM interfaces for I2C/SPI/UART, an integrated segmented LCD controller (SLCD) up to 8x32 segments, and a full-speed USB device. The 64-QFN package with exposed pad enables efficient thermal dissipation and compact PCB layouts. Architecturally, the SAM L22 family shares an identical linear address map and hex-compatible code with the SAM L21 and SAM D20/D21 lines, enabling simple migration paths between devices within the family. Pin-compatible migration is supported across flash-size variants in the same package, allowing OEMs to scale from 128KB to 256KB without PCB rework. Typical applications include battery-powered IoT sensor nodes, wearable health and fitness devices, smart meters, home automation controllers, electronic shelf labels, low-end consumer products, and industrial HMI panels with integrated LCD displays. The integrated SLCD driver and ultra-low-power RTC make the part especially attractive for human-interface devices that must run for years on a single coin cell. When designing with this device, ensure the exposed pad on the 64-QFN package is properly soldered to a sufficient ground copper pour for thermal and electrical performance. Decouple VDD with at least 100 nF and 1 µF ceramic capacitors placed close to the supply pins, and follow Microchip's SAML22 hardware errata and reference design recommendations for the USB and SLCD blocks. This page synthesizes distributor pricing, pin-compatible drop-in alternatives in the same 64-QFN footprint, and practical design notes not found in the manufacturer datasheet alone, helping engineers accelerate part selection and PCB layout validation.

Permintaan RFG Kontak
ATSAML22J18A-AUT - 32MHz Cortex-M0+ MCU 256KB Flash | Microchip
ATSAML22J18A-AUT

ATSAML22J18A-AUT - 32MHz Cortex-M0+ MCU 256KB Flash | Microchip

The Microchip ATSAML22J18A-AUT is a 32-bit ARM Cortex-M0+ microcontroller from the SAM L22 family, delivering 32 MHz CPU performance with 256 KB of Flash and 32 KB of SRAM in a 64-pin TQFP (10x10 mm) package. It operates from 1.6 V to 3.6 V with sophisticated power management consuming 39 µA/MHz in active mode (CoreMark) and down to 490 nA in ultra-low-power backup mode with RTC running. A microcontroller (MCU) is an integrated circuit that combines a CPU core, program memory (Flash), working memory (SRAM), and a rich set of peripherals on a single die. The SAM L22 belongs to the ultra-low-power MCU category within the broader ARM Cortex-M0+ family, positioned between 8-bit MCUs and Cortex-M4 application processors in terms of performance and energy efficiency. It integrates an LCD segment driver, capacitive touch (PTC) hardware, and USB device support, making it a true system-on-chip for battery-powered human-machine interface products. Key features include Segment LCD driver (up to 8 common x 40 segment), 16-channel 12-bit ADC with hardware oversampling, 3-channel 10-bit DAC, two I2C and four SERCOM-configurable serial interfaces, full-speed USB 2.0 device, 12-channel PTC for touch sensing, and an AES-256 crypto accelerator. The integrated 32.768 kHz crystal oscillator enables RTC accuracy of ±5 ppm across 0-50 °C. The device supports Sleep, Idle, Standby, and Backup power domains, with fast wake-up from 1.5 µs from Standby. Architecturally, the SAM L22 uses Microchip's proprietary picoPower technology with an event system that allows peripherals to communicate without CPU intervention, drastically reducing active time and average power. The ARM Cortex-M0+ core delivers 0.9 DMIPS/MHz via the Thumb-2 subset, and the single-cycle 32x32 hardware multiplier handles DSP-like operations for sensor fusion and audio effects. Typical applications include battery-powered IoT sensor nodes with segment-LCD displays, wearable health and fitness bands with capacitive touch buttons, smart utility meters, electronic shelf labels (ESL), medical dosing pumps, asset tracking tags, and portable industrial HMI panels. The 256 KB Flash comfortably hosts USB stacks, graphics libraries, and over-the-air update bootloaders. When designing with this part, choose the 64-TQFP package when your board has spare area and you need maximum I/O access; for smaller footprints consider the QFN variant. Always include a 32.768 kHz crystal across pins XIN32/XOUT32 for accurate RTC, and ensure VDDIO and VDDC decoupling with 100 nF X7R capacitors placed within 3 mm of each pin. This page synthesizes distributor pricing, drop-in alternatives within the SAM L22 family, and practical low-power design notes not found in the manufacturer datasheet summary alone.

Permintaan RFG Kontak
ATSAML22J18A-MUT - 32MHz Cortex-M0+ MCU 256KB Flash | Microchip
ATSAML22J18A-MUT

ATSAML22J18A-MUT - 32MHz Cortex-M0+ MCU 256KB Flash | Microchip

The Microchip ATSAML22J18A-MUT is an ultra-low-power 32-bit ARM Cortex-M0+ microcontroller from the SAM L22 family, integrating 256 KB of Flash and 32 KB of SRAM in a 64-pin QFN (9x9) package with an exposed thermal pad. It operates from 1.6 V to 3.6 V and runs up to 32 MHz, making it suited to battery-powered and energy-harvesting designs where active current, sleep current, and wake-up latency are all constrained. A low-dropout (LDO) linear regulator is a type of voltage regulator that maintains a stable output voltage even when the input voltage is very close to the output voltage, dropping only the headroom required by a pass element. In a power-management hierarchy, an LDO sits below a DC-DC switching converter and is used for post-regulation or noise-sensitive rails; for the SAM L22 family specifically, internal LDO and DC-DC blocks support sleep-mode currents in the hundreds of nanoamperes. Understanding this hierarchy helps frame why SAM L22 parts are positioned for always-on sensor nodes rather than high-throughput DSP. Key features of the ATSAML22J18A-MUT include 39 uA/MHz active current running CoreMark, 490 nA ultra-low-power backup mode with RTC retention, an on-chip 32.768 kHz RTC, and segment LCD support up to 8x36 segments. The integrated PTC (Peripheral Touch Controller) enables capacitive touch sensing without an external IC, and the SERCOM-configurable serial interfaces provide flexible UART/SPI/I2C connectivity. Hardware crypto, true random number generator, and secure boot features support IoT security requirements. The SAM L22 architecture uses a single-cycle hardware multiplier, single-cycle 32-bit divider option, and a low-power Cortex-M0+ core with Sleepwalking peripherals that wake the CPU only on qualifying events. The device supports 1.62 V minimum supply, allowing direct connection to single-cell Li-ion or 2x AA chemistries without external regulation. Code density is enhanced via Thumb-2 instruction set and Microchip's Atmel Studio/MPLAB X IDE toolchain with FreeRTOS support. Typical applications include IoT sensor nodes, wearable health monitors, smart home hubs with segment LCD front panels, industrial metering, capacitive touch user interfaces, and battery-powered HVAC controls. The 64-QFN with EP provides a compact footprint for space-constrained PCBAs while the exposed pad improves thermal dissipation for sustained 32 MHz operation. When designing with this device, plan decoupling per Section 7 of the manufacturer datasheet, route the exposed pad to a contiguous ground copper pour, and configure the LCD charge pump voltage before driving segments. Use sleep modes strategically - Sleepwalking I/O can reduce average current by 10x or more compared with polling. The VDDIO2 supply rail allows independent I/O voltage for mixed-voltage peripherals. This page synthesizes distributor pricing, drop-in same-package alternatives, and design notes for the ATSAML22J18A-MUT that are not aggregated on the manufacturer datasheet or single distributor pages.

Permintaan RFG Kontak
ATSAML22N16A-AUT - 32MHz Cortex-M0+ 64KB Flash MCU | Microchip
ATSAML22N16A-AUT

ATSAML22N16A-AUT - 32MHz Cortex-M0+ 64KB Flash MCU | Microchip

The Microchip ATSAML22N16A-AUT is an ultra-low-power 32-bit ARM Cortex-M0+ microcontroller from the SAM L22N family, featuring 64KB Flash and 8KB SRAM in a 100-pin TQFP (14x14 mm) package. It operates at up to 32MHz, supports 1.6V to 3.6V supply voltage, and integrates a segment LCD controller capable of driving up to 320 LCD segments, making it purpose-built for battery-powered metering, wearable, and IoT display applications. A microcontroller (MCU) is a single-chip computer that integrates a CPU, memory (Flash for program storage and SRAM for runtime data), and a rich set of peripherals on one die. The SAM L22N belongs to the Cortex-M0+ class - the most energy-efficient ARM core for embedded workloads - paired with Microchip's proprietary ultra-low-power peripherals such as the AFE (Analog Front End) for sensor readout. The active-mode current of 39 µA/MHz (running CoreMark) and the 490 nA ultra-low-power backup mode with RTC place the part firmly in the 'always-on, coin-cell-friendly' tier of MCUs. Key features include integrated SLCD (segment LCD) driver for up to 320 segments (8 com x 40 seg, or 4 com x 44 seg), Cortex-M0+ core with 2.14 CoreMark/MHz, 12-bit ADC with hardware averaging, 12-bit DAC, 16-bit timers (TC), SERCOM (configurable USART/SPI/I2C) channels, and a battery-backed RTC domain that retains state down to 490 nA. The SAM L22N family uses a Harvard-bus architecture with single-cycle 32x32 hardware multiply, deterministic 2-stage pipeline, and a Nested Vectored Interrupt Controller (NVIC). The integrated AFE includes a 24-bit sigma-delta front end and a 12-bit SAR ADC, enabling direct sensor readout without external signal-conditioning ICs. The wide 1.6V-3.6V VDD range supports direct connection to single-cell Li-ion, 3V coin cells, and 2xAA stacks without external regulation. Typical applications include smart electricity/water/gas meters with LCD, fitness bands and wearable medical devices with segment displays, battery-powered industrial sensor nodes, electronic shelf labels, and home automation keypads with LCD readouts. The 320-segment LCD capability differentiates it from generic Cortex-M0+ MCUs that require an external LCD driver. Designers should evaluate wake-up source mapping (RTC, external interrupt, ADC window comparator) when targeting deep-sleep battery life, and reserve adequate Flash for the bootloader if OTA updates are required (64KB is sufficient for typical Cortex-M0+ application code but tight for full USB stacks). This page synthesizes distributor pricing, same-family drop-in variants, AEC-Q100 alternative grades, and practical low-power design notes that go beyond the manufacturer datasheet's parametric tables.

Permintaan RFG Kontak
ATSAML22N16A-CFUT - Ultra-Low-Power ARM M0+ MCU 64KB Flash | Microchip
ATSAML22N16A-CFUT

ATSAML22N16A-CFUT - Ultra-Low-Power ARM M0+ MCU 64KB Flash | Microchip

The Microchip Technology ATSAML22N16A-CFUT is an ultra-low-power 32-bit ARM Cortex-M0+ microcontroller (MCU) from the SAM L22N family, integrating 64 KB of Flash and 8 KB of SRAM in a 100-ball UFBGA (6x6 mm) package. It operates from a 1.6 V to 3.6 V supply, runs at up to 32 MHz, and is optimized for battery-powered and energy-harvesting designs where active current and deep-sleep consumption directly determine end-product battery life. What is an ultra-low-power microcontroller? An ultra-low-power MCU is a microcontroller that combines a low-power CPU core (often ARM Cortex-M0+ or M4) with multiple low-power operating modes (active, idle, standby, backup, deep-sleep, off), low-leakage peripherals, and event-driven wake-up logic. It sits within the broader taxonomy of microcontrollers -> embedded processors -> semiconductor ICs. Engineers reach for ultra-low-power MCUs like the SAM L22 when average current draw must drop into the µA/nA range so that coin cells, lithium thionyl chloride cells, or harvested energy sources can last for years. Key features include Cortex-M0+ core at 32 MHz with single-cycle I/O access, 64 KB Flash, 8 KB SRAM, full-speed USB device with internal pull-up and 1.5 K endpoints, Segment LCD controller driving up to 8 COM x 25 SEG, two SERCOM (USART/SPI/I2C) channels, 12-bit ADC and DAC, and an integrated PTC (Peripheral Touch Controller) supporting capacitive touch buttons and sliders. Active-mode current is specified at 39 µA/MHz running CoreMark, while ultra-low-power backup mode with RTC reaches 490 nA. The SAM L22 architecture pairs the Cortex-M0+ core with Microchip's proprietary low-power techniques, including multiple clock domains, peripheral event system, and SleepWalking for DMA-driven peripheral operation without CPU intervention. BOD, brown-out reset, watchdog timer, and a 32 kHz RTC make the part suitable for metering and industrial sensor nodes. Typical applications include battery-powered IoT sensor nodes, medical wearables, smart meters and energy harvesting, consumer health devices, Segmented LCD user interfaces, USB-CDC class devices, and capacitive-touch human-machine interfaces. The wide 1.6 V - 3.6 V range and ARM Cortex ecosystem support firmware reuse across the SAM family. When designing with this device, evaluate total average power including wake/sleep duty cycle rather than peak current. Use the SAM L22's peripheral event system and SleepWalking to keep the CPU asleep while ADC, SERCOM, or RTC handle I/O autonomously. This page synthesizes distributor pricing, drop-in alternatives, comparison parameters, and practical design notes not aggregated in the manufacturer datasheet.

Permintaan RFG Kontak
ATSAML22N17A-AUT - 32MHz M0+ 128KB Flash MCU | Microchip
ATSAML22N17A-AUT

ATSAML22N17A-AUT - 32MHz M0+ 128KB Flash MCU | Microchip

The Microchip Technology ATSAML22N17A-AUT is an ultra-low-power 32-bit ARM Cortex-M0+ microcontroller from the SAM L22 family, featuring 128KB of Flash, 16KB of SRAM, and an integrated segment LCD controller supporting up to 320 segments, all packaged in a 100-pin TQFP (14x14 mm). The device operates from a 1.6V to 3.6V supply, runs at up to 32 MHz, and is qualified for the -40C to +85C industrial temperature range. An ultra-low-power microcontroller (MCU) is a class of embedded controller that integrates a CPU core, memory, and peripherals while optimizing every operating mode for minimum energy consumption. Within the semiconductor taxonomy, an MCU belongs to microcontrollers -> integrated circuits -> semiconductors. The SAM L22 family specifically targets battery-powered metering, medical, and IoT applications where the segment LCD driver eliminates the cost and current drain of an external display controller. Key features of the ATSAML22N17A-AUT include 39 uA/MHz active current running CoreMark, a deep-sleep backup mode drawing only 490 nA with RTC retention, a 12-bit ADC, multiple SERCOM interfaces, a full-speed USB device, and a hardware segmented LCD controller with integrated charge pump. The device also provides a 32 kHz RTC, multiple timers, and an event system for low-power peripheral signaling without CPU intervention. The architecture combines an ARM Cortex-M0+ core with single-cycle I/O access, a dedicated LCD segment driver peripheral, and a sophisticated power management unit featuring eight distinct sleep modes. The integrated charge pump allows direct biasing of 3V or 5V LCD glass from a single Li-ion cell, simplifying meter and appliance front-panel designs. Typical applications include electricity meters, water/gas meters with LCD readouts, medical monitoring devices, industrial sensor nodes, and battery-powered IoT terminals. The combination of segment LCD, USB, and sub-microamp backup current makes the part especially well-suited to portable metering and wearable health devices. When designing with this part, ensure that decoupling capacitance is placed within 5 mm of each VDD pin pair and that the segment LCD bias network follows the reference schematic in the datasheet. The AUT suffix indicates tape-and-reel packaging for high-volume assembly. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, giving engineers a single decision-ready view of the ATSAML22N17A-AUT and its pin-compatible peers.

Permintaan RFG Kontak
ATSAML22N17A-CFUT - ARM Cortex-M0+ 32MHz 128KB MCU | Microchip
ATSAML22N17A-CFUT

ATSAML22N17A-CFUT - ARM Cortex-M0+ 32MHz 128KB MCU | Microchip

The Microchip Technology ATSAML22N17A-CFUT is an ultra-low-power ARM Cortex-M0+ 32-bit microcontroller running at 32 MHz with 128 KB of Flash and 16 KB of SRAM, housed in a 100-ball UFBGA (6x6 mm) package. It operates from 1.6 V to 3.6 V and consumes 39 µA/MHz in active CoreMark mode, dropping to 490 nA in ultra-low-power backup mode with RTC running. The device is engineered for battery-powered IoT, sensor, and wearables where every microwatt matters. An ARM Cortex-M0+ microcontroller is a 32-bit reduced-instruction-set core built around the Thumb-2 instruction set and a single-cycle IO subsystem; the M0+ specifically adds a single-cycle GPIO block and a vectored interrupt controller for deterministic real-time response. Microcontrollers sit within the embedded-computing hierarchy of semiconductor devices (MCU -> microcontroller -> embedded processor -> semiconductor), and ultra-low-power variants such as the SAM L22 family specifically target always-on battery applications where duty-cycled sleep currents dominate the energy budget. Key features include a 12-bit ADC, 16-bit timers, SERCOM (configurable serial communication) peripherals, a USB 2.0 Full-Speed device/host interface, an on-chip temperature sensor, and integrated touch-support through the Peripheral Touch Controller. The SAM L22 family is rated for an industrial temperature range of -40 °C to +85 °C in the CFUT UFBGA-100 package and supports up to 256 KB Flash and 32 KB SRAM across its variants, with the N17A die providing 128 KB Flash plus 16 KB SRAM at the optimized ultra-low-power operating point. Architecturally, the device separates active and sleep power domains, allowing the CPU and most peripherals to power down while the RTC, WDT, and backup SRAM remain active. The integrated Power Manager with brown-out detector and on-chip voltage regulator allows direct battery connection from 1.6 V to 3.6 V without external regulation. Hardware cryptography is not integrated on this die; secure-boot and crypto functions require software implementation or an external companion IC. Typical applications include battery-powered IoT sensor nodes, wearable health monitors, industrial HVAC and metering edge nodes, consumer remote controls, and low-power wireless sensor hubs. Designers choose this part when wake-on-event cycle efficiency is more important than raw CPU throughput. Consider 32 MHz versus the lower-power 8 MHz sleep-clock modes for thermal-budget or energy-harvesting designs. This page synthesizes distributor pricing, drop-in SAM L22N family alternatives, and practical low-power design notes not found on a single distributor listing.

Permintaan RFG Kontak
ATSAML22N18A-CFUT - 32MHz Cortex-M0+ 256KB Flash MCU | Microchip
ATSAML22N18A-CFUT

ATSAML22N18A-CFUT - 32MHz Cortex-M0+ 256KB Flash MCU | Microchip

The Microchip ATSAML22N18A-CFUT is an ultra-low-power 32-bit ARM Cortex-M0+ microcontroller in the SAM L22N family, integrating 256KB of Flash, 32KB of SRAM, and a Full-Speed USB 2.0 controller in a 100-ball UFBGA (6x6 mm) package. It operates from a 1.6V to 3.6V supply at up to 32 MHz and consumes only 39 µA/MHz in active CoreMark execution and down to 490 nA in ultra-low-power backup mode with RTC retention. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (SRAM), and a rich set of peripherals (timers, ADC, communication controllers). The Cortex-M0+ sits at the energy-efficient end of the ARM Cortex-M hierarchy (Cortex-M0+ -> Cortex-M0 -> Cortex-M3/M4), making the SAM L22N ideal for battery-powered and energy-harvesting products. The SAM L22N series specifically targets metering, sensor nodes, and human-machine interface applications that demand long battery life. Key features include a 12-bit 1 Msps ADC with hardware oversampling, a 10-bit DAC, up to 6 SERCOM serial interfaces configurable as UART/SPI/I2C, a Segment LCD controller (SLCD) up to 8x40 segments, and an integrated Full-Speed USB 2.0 device/host controller. The device also includes an AES cryptographic engine, a True Random Number Generator (TRNG), a capacitive touch PTC peripheral, and a Peripheral Touch Controller supporting up to 256 channels. The architecture combines the Cortex-M0+ core with a 2-channel DMA controller and a 12-channel event system that allows peripherals to communicate without CPU intervention, achieving ultra-low standby current. The 100-ball UFBGA package (6x6 mm) keeps the footprint comparable to competing LQFP-100 packages while providing better electrical performance for high-speed USB signalling. Typical applications include smart electricity meters, water/gas meters, wireless sensor nodes, building automation, wearable health monitors, IoT edge devices, and human-machine interface (HMI) panels. The integrated SLCD controller and USB support reduce BOM cost in metering and HMI designs. When designing with this MCU, allocate decoupling capacitors close to every VDD pin and route the USB DP/DM traces as a 90 ohm differential pair. Use the Atmel/Microchip START code-configurator and MPLAB X IDE to generate the SAML22 firmware framework and validate current consumption with the SAME54 Xplained Pro power-analysis tooling. This page synthesizes distributor pricing, drop-in same-family alternatives, and practical design notes not consolidated in the manufacturer datasheet, providing engineers with an engineering-decision view beyond raw spec lists.

Permintaan RFG Kontak
ATSAMS70J19A-AN - 300MHz Cortex-M7 MCU, 512KB Flash | Microchip
ATSAMS70J19A-AN

ATSAMS70J19A-AN - 300MHz Cortex-M7 MCU, 512KB Flash | Microchip

The Microchip Technology ATSAMS70J19A-AN is a 32-bit ARM Cortex-M7 microcontroller with Floating Point Unit (FPU), running at up to 300 MHz, featuring 512 KB of Flash and 256 KB of SRAM in a 64-pin LQFP (10x10 mm) package. As a member of the SAM S70 family, it integrates a rich peripheral set including high-speed USB, CAN-FD, Ethernet MAC, HSEM (Hardware Semaphore), and a TFT LCD controller. An ARM Cortex-M7 microcontroller is a high-performance 32-bit processor core built on the ARMv7-M architecture, featuring a 6-stage superscalar pipeline, branch prediction, single-precision/double-precision FPU, and tightly-coupled memory (TCM) for deterministic low-latency code execution. It belongs to the broader hierarchy: ARM Cortex-M7 -> ARM Cortex-M family -> 32-bit MCU -> embedded microcontroller -> semiconductor. The Cortex-M7 is purpose-built for DSP workloads and real-time control, replacing legacy DSP ICs in many applications. Key features of the ATSAMS70J19A-AN include 300 MHz core clock, 512 KB Flash, 256 KB SRAM, 16 KB ICache, 16 KB DCache, USB 2.0 High-Speed with integrated PHY, dual CAN-FD controllers, 10/100 Ethernet MAC with 1588 PTP support, 12-bit AFEC (analog front-end controller) up to 1 MSPS, and an image sensor interface (ISI). The SAM S70 family targets high-performance industrial, automotive infotainment, and IoT edge applications. The device uses a single-precision/double-precision FPU and DSP extensions, supporting floating-point and SIMD instructions for advanced signal processing. The Cortex-M7 core delivers 1500 CoreMarks and up to 300 DMIPS performance, enabling complex control loops, audio processing, and machine-learning inference at the edge. Typical applications include industrial motor control, building automation, smart energy meters, automotive infotainment, IoT gateways, point-of-sale terminals, and graphics-enabled HMI with TFT LCD. The Ethernet MAC and CAN-FD bus make it suitable for industrial networking, while the USB HS and image sensor interface enable multimedia endpoints. When designing with this device, ensure the regulator is sized to handle the worst-case inrush during ADC reference stabilization and PLL lock. The 64-pin LQFP footprint is shared with SAM E70, SAM V70, and SAM V71 family members, easing migration when scaling Flash/RAM or adding CAN-FD/HS USB requirements. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

Permintaan RFG Kontak
ATSAMS70J21A-AN - 300MHz Cortex-M7 2MB MCU | Microchip
ATSAMS70J21A-AN

ATSAMS70J21A-AN - 300MHz Cortex-M7 2MB MCU | Microchip

The Microchip ATSAMS70J21A-AN is a high-performance 32-bit ARM Cortex-M7 flash microcontroller operating up to 300 MHz, with 2 MB of program Flash, 384 KB of SRAM, and a 64-pin LQFP package measuring 10 mm by 10 mm. It includes a Floating Point Unit and belongs to the SAM S70 family of real-time embedded microcontrollers. A flash microcontroller integrates a processor core, nonvolatile program memory, SRAM, peripherals, and communication interfaces on one device. The ARM Cortex-M7 architecture belongs to the embedded MCU hierarchy and provides deterministic instruction execution with hardware floating-point support. This makes the SAM S70 family suitable when a design must combine real-time control, signal processing, graphics support, and connected peripherals without relying on an external processor or memory. The principal device characteristics are a 300 MHz maximum operating frequency, 2 MB Flash, 384 KB SRAM, 32-bit processing, and a 64-LQFP package. The large code-memory capacity allows substantial application firmware, protocol stacks, and data tables to reside locally, while the 384 KB SRAM supports working buffers for audio, communications, control, and image or graph processing workloads. The floating-point unit accelerates suitable arithmetic without requiring software emulation. The S70 architecture combines high-performance Cortex-M7 execution with an extensive peripheral set for embedded control. Its cache-based architecture is intended to improve execution efficiency when application code and working data are accessed repeatedly. Engineers can use the MCU for deterministic control loops, communications gateways, industrial equipment, and human-machine interfaces where response time and local integration are important. SEGGER J-Link support is documented for the ATSAMS70J21A device family, which assists with debugging and programming workflows. Typical uses include industrial automation, connected control equipment, audio and signal-processing modules, network-attached industrial gateways, and compact user-interface systems. The 2 MB Flash capacity is particularly useful for firmware that includes networking stacks, update mechanisms, diagnostics, and real-time control code. The 384 KB SRAM also reduces the need to access external memory during normal operation, although designers must still check peripheral and electrical requirements in the manufacturer datasheet. Layout planning is critical because this device combines a 300 MHz processor with numerous multiplexed pins in a 10 mm by 10 mm LQFP. Place decoupling capacitors close to the supply pins, route high-speed signals away from noisy switching nodes, and observe the recommended external-component and layout guidance. Confirm the complete pin multiplexing table before assigning board functions because many peripheral signals share pins. This page consolidates the confirmed processor, memory, frequency, package, sourcing, tool-support, and replacement information into an engineering-focused guide. It also identifies where a complete electrical characterization, pin assignment, or drop-in alternative must be confirmed against the Microchip documentation before a design is released.

Permintaan RFG Kontak
ATSAMS70J21A-MN 300MHz Cortex-M7 2MB Flash | Microchip
ATSAMS70J21A-MN

ATSAMS70J21A-MN 300MHz Cortex-M7 2MB Flash | Microchip

The Microchip ATSAMS70J21A-MN is a high-performance 32-bit ARM Cortex-M7 flash microcontroller with Floating Point Unit, operating at up to 300 MHz and providing 2048 KB of Flash memory in a 64-QFN package measuring 9 mm by 9 mm. The SAMS70J21 family combines a high-speed Cortex-M7 core with extensive embedded resources for control, communications, and real-time signal-processing systems. A microcontroller such as ATSAMS70J21A-MN integrates a CPU, programmable peripherals, memory, and communication interfaces into one device. Within the product hierarchy, it is an ARM Cortex-M7 microcontroller, an embedded processor, and ultimately a semiconductor used to control external hardware. Its FPU supports efficient floating-point calculations, while Flash memory provides nonvolatile program storage for firmware, configuration, and application data. The principal device characteristics shown by the manufacturer include a 300 MHz operating speed, 2048 KB of Flash memory, 384 KB of SRAM, and a 64-QFN package. The combination of a 300 MHz Cortex-M7 core and 384 KB of SRAM provides useful working memory for protocol stacks, graphics, control loops, and moderately data-intensive embedded applications. The 64-pin package also supports integration of multiple communication and mixed-signal peripherals on a compact PCB footprint. The SAMS70J21A family is positioned for industrial, communications, networking, human-machine-interface, and embedded control applications. Its 2 MB Flash capacity allows larger bootloaders, networking stacks, firmware update mechanisms, and application code than a small general-purpose MCU. Engineers can also use the ARM Cortex-M7 ecosystem, including SEGGER J-Link support documented for the ATSAMS70J21A family, for debugging and programming. ATSAMS70J21A-MN uses the 64-QFN 9 x 9 mm package, while the closely related ATSAMS70J21A-AN uses a 64-LQFP 10 x 10 mm package. These package choices are not interchangeable without PCB redesign because their land patterns differ. Confirm the exact pin multiplexing, electrical limits, clock requirements, and decoupling recommendations in the manufacturer datasheet before schematic capture or PCB layout. For a new SAMS70J21A design, validate the device revision, exposed-pad soldering requirements, power-supply sequencing, external memory interfaces, and firmware support level. The QFN thermal pad should receive a properly designed via and copper-heat-dissipation structure. This page combines the manufacturer family information with package-specific ordering guidance and practical selection criteria for engineers evaluating the ATSAMS70J21A-MN.

Permintaan RFG Kontak
ATSAMS70J21B-AN - 300MHz Cortex-M7 MCU with 2MB Flash | Microchip
ATSAMS70J21B-AN

ATSAMS70J21B-AN - 300MHz Cortex-M7 MCU with 2MB Flash | Microchip

The Microchip Technology ATSAMS70J21B-AN is a high-performance 32-bit ARM Cortex-M7 flash microcontroller operating up to 300 MHz, with 2 MB of Flash memory, 384 KB of SRAM, and a 64-LQFP package measuring 10 mm by 10 mm. The processor includes a Floating Point Unit, while the integrated peripheral set supports PWM channels, ADC, DAC, DMA, and a 16-bit external data bus. A 1.08 V to 1.32 V operating-supply range and an industrial temperature grade of -40°C to 105°C suit embedded control, communications, and real-time signal-processing systems. A flash microcontroller is a semiconductor that combines a processor core, programmable nonvolatile memory, RAM, and integrated peripherals in one device. Its position in the product hierarchy is microcontroller, embedded processor, semiconductor, and programmable control component. The Cortex-M7 architecture provides a high-performance platform for real-time control while retaining a compact integrated design and deterministic peripheral access. The Floating Point Unit accelerates floating-point calculations used in control loops, filtering, and industrial data processing. The ATSAMS70J21B-AN combines a 300 MHz processor with 2 MB of Flash and 384 KB of SRAM, giving embedded software enough memory for larger control tables, communication stacks, and signal-processing tasks. Integrated PWM, ADC, DAC, and DMA blocks reduce external component requirements and allow transfers to occur with limited processor intervention. The 16-bit external data bus provides a dedicated path for external memory or parallel peripherals, while operating temperatures of -40°C to 105°C support industrial equipment. Microchip identifies the S70J21 as a flash-microcontroller family based on the 32-bit ARM Cortex-M7 processor with an FPU. The 2 MB Flash is organized as 2M x 8 bits, and the maximum operating frequency is 300 MHz. These characteristics place the device between general-purpose low-power microcontrollers and more complex application processors, providing substantial compute and peripheral capacity without requiring an external microprocessor. Typical applications include industrial automation controllers, motor-control and power-conversion systems, communications equipment, data-acquisition units, and real-time embedded platforms. The ADC and DMA resources support sampled sensor systems, PWM supports precise timing and actuator control, and the DAC supports analog waveform generation. The 64-LQFP package also provides a practical option for designs requiring a conventional leaded footprint rather than a very fine-pitch ball grid array. Designers should verify power sequencing, decoupling, clock configuration, and the complete 64-pin assignment against the manufacturer datasheet before releasing PCB artwork. The low 1.08 V to 1.32 V operating supply is a core-system requirement, so the complete board architecture must provide the appropriate rails and sequencing rather than relying on a single unregulated supply. This page combines the manufacturer family information, exact device characteristics, package details, sourcing guidance, replacement criteria, and practical engineering considerations. It also distinguishes genuine pin-compatible alternatives from functionally similar Cortex-M7 devices whose packages or peripheral arrangements prevent drop-in replacement.

Permintaan RFG Kontak
ATSAMS70N19A-AN - SAM S70 Cortex-M7 MCU 300MHz 512KB Flash | Microchip
ATSAMS70N19A-AN

ATSAMS70N19A-AN - SAM S70 Cortex-M7 MCU 300MHz 512KB Flash | Microchip

The Microchip Technology ATSAMS70N19A-AN is a 32-bit ARM Cortex-M7 microcontroller with Floating Point Unit (FPU) running up to 300 MHz, integrating 512 KB of Flash and 256 KB of SRAM, housed in a 100-pin LQFP (14x14 mm) package. This SAM S70 family device targets high-performance embedded designs requiring deterministic real-time control, rich connectivity, and a rich peripheral mix including Ethernet, HS USB, CAN-FD, and a 12-bit ADC with up to 24 channels. What is a Cortex-M7 microcontroller? A Cortex-M7 is a 32-bit ARM processor core designed for high-performance microcontroller applications, including a hardware single-precision and double-precision FPU, tightly coupled memories (TCM), and an instruction cache. It sits above Cortex-M4 in the ARM hierarchy (Cortex-M0/M0+ -> Cortex-M3 -> Cortex-M4 -> Cortex-M7 -> Cortex-M33/M55/M85), offering superscalar DSP and SIMD capabilities for signal-processing and motor-control workloads. The Cortex-M7 belongs to the broader family of microcontrollers -> microcontrollers ICs -> embedded processors -> semiconductors. Key features include 300 MHz core clock, 512 KB Flash program store, 256 KB SRAM, a 12-bit 1 Msps ADC, two CAN-FD controllers, 10/100 Mbps Ethernet MAC, high-speed USB host/device with PHY, an image sensor interface, an external bus interface (EBI) for SRAM/NOR/NAND, and a high-speed SD/MMC host. The 100-LQFP package exposes most peripherals for low-cost PCB designs while supporting industrial temperature operation from -40C to +105C. Technically, the SAM S70 architecture couples an MPU-aware Cortex-M7 core to a multi-layer AHB bus matrix with separate peripherals and tightly-coupled memories, enabling deterministic DMA and zero-wait-state Flash access via a 2 KB cache. 256 KB SRAM is split between system SRAM and backup SRAM retained in certain low-power modes; the 12-bit ADC and analog comparators are routed to dedicated peripheral channels. Hardware crypto is not part of the SAM S70 itself - that feature lives on the related SAME70 family. Typical applications include industrial motor control (BLDC/PMSM), industrial automation and PLC interfaces, building automation and HVAC, smart energy metering, automotive body/infotainment peripherals, audio processing front ends, machine vision at the edge, and connected gateways with Ethernet and CAN-FD. The SAMS70N19 is also used in medical instrumentation where the FPU and DSP extension accelerate filter computations. When designing with this device, allocate sufficient decoupling (100 nF near each VDD/VDDIO pin plus bulk) and follow Microchip's SAMS70 errata for HS USB PHY, EBI timing, and CAN-FD revision items. Use MPLAB X IDE with MPLAB Harmony 3 (csp, core, and a supported middleware layer) for code generation, peripheral drivers, and FreeRTOS integration. This page synthesizes distributor pricing, parametric positioning, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone - including a cross-vendor comparison row and a curated set of Microchip SAME70/SAMS70 family pin-compatible options for reuse of existing PCB layouts.

Permintaan RFG Kontak
ATSAMS70N19B-CN - 300MHz Cortex-M7 MCU | Microchip
ATSAMS70N19B-CN

ATSAMS70N19B-CN - 300MHz Cortex-M7 MCU | Microchip

Microchip ATSAMS70N19B-CN is a 32-bit ARM Cortex-M7 flash microcontroller operating at up to 300 MHz, with 512 KB of embedded Flash, 256 KB of SRAM, and a 100-pin TFBGA package measuring 9 x 9 mm. It integrates a 12-bit analog front end, a 12-bit DAC, CAN-FD connectivity, and a Floating Point Unit for mixed-signal and connected industrial systems. A flash microcontroller is a semiconductor device that combines a processor core, nonvolatile program memory, data memory, and programmable peripherals on one integrated circuit. The ATSAMS70N19 family belongs to the hierarchy of embedded processors, microcontrollers, ARM Cortex-M microcontrollers, and real-time mixed-signal microcontrollers. This combination places high-speed control, communications, data acquisition, and analog output capabilities within a single device. The ATSAMS70N19B-CN provides a 300 MHz ARM Cortex-M7 core, 512 KB of Flash, 256 KB of SRAM, 32-bit processing, and a hardware Floating Point Unit. Its 12-bit AFE and 12-bit DAC support applications that require both digital computation and precision analog interfaces. CAN-FD capability makes the device appropriate for industrial networking, while 1.2 V and 3.3 V operating options support both low-voltage digital cores and external peripheral interfaces. The device uses a 100-pin TFBGA surface-mount package and is offered in a tray configuration. Its operating temperature range is -40 degrees C to +105 degrees C. At 300 MHz, the Cortex-M7 architecture includes the FPU and cache features needed for responsive real-time control, signal processing, communications protocol handling, and human-machine-interface workloads. These capabilities must be balanced against power-management and thermal requirements during system-level frequency selection. Typical uses include industrial automation controllers, CAN-FD-connected sensor hubs, precision data-acquisition equipment, motor-control systems, and networked industrial gateways. In these systems, the MCU can process real-time measurements, execute control algorithms, and manage communications while its integrated ADC resources and DAC reduce the need for separate analog interface circuitry. PCB implementation requires careful power, decoupling, clock, and signal-integrity planning in the dense 9 x 9 mm TFBGA footprint. The manufacturer pin-description table should be used to assign every ball, including supply, ground, analog, debug, and communications functions. Review the operating limits and package drawing before finalizing component spacing, routing, and thermal management. This product page combines manufacturer specifications, package information, sourcing guidance, application-oriented engineering context, and a same-package comparison set. It is designed to help engineers evaluate the ATSAMS70N19B-CN for high-performance embedded and mixed-signal designs without treating the manufacturer product page as a substitute for the complete datasheet, errata, and device-specific application notes.

Permintaan RFG Kontak
ATSAMS70N20A-AN - 300MHz Cortex-M7 MCU | Microchip
ATSAMS70N20A-AN

ATSAMS70N20A-AN - 300MHz Cortex-M7 MCU | Microchip

The Microchip Technology ATSAMS70N20A-AN is a high-performance, single-core 32-bit ARM Cortex-M7 microcontroller with FPU, operating at up to 300 MHz and integrating 1 MB of Flash memory in a 100-LQFP 14 x 14 mm package. The device provides 384 KB of SRAM and combines deterministic real-time control capability with high-speed digital signal processing. A microcontroller is a programmable semiconductor that integrates a processor core, memory, and peripherals on one integrated circuit. The Cortex-M7 architecture places the ATSAMS70N20A-AN in the embedded microcontroller hierarchy, where it provides substantially more computation than conventional 8-bit or 16-bit control devices. Its floating-point unit accelerates control algorithms and digital signal-processing workloads without requiring a separate processor. Key features include a 300 MHz maximum operating frequency, 1,024 KB of Flash organized as 1M x 8, 384 KB of SRAM, and a single Cortex-M7 core. The 1 MB program-memory capacity supports larger embedded applications, while the 384 KB SRAM provides working space for graphics, networking stacks, and real-time data buffers. The 100-LQFP package also provides a practical route for high-density boards requiring many external connections. The SAMS70N20 family is based on the high-performance 32-bit ARM Cortex-M7 processor with Floating Point Unit. It is suitable for systems that must combine control-loop responsiveness with substantial data throughput. Compared with smaller Cortex-M devices, the 300 MHz core and enlarged memory resources create more headroom for complex algorithms, connected equipment, and human-machine interfaces. Typical applications include industrial automation, factory monitoring, robotics, connected sensors, communications equipment, and high-end audio systems. The microcontroller can manage real-time control tasks while supporting higher-bandwidth signal processing, making it useful for supervisory controllers as well as dedicated embedded nodes. PCB design should preserve the pin and power requirements defined by the Microchip datasheet. Place decoupling capacitors close to each supply pin, route high-speed signals over continuous reference planes, and keep sensitive analog inputs away from switching nodes. Confirm the exact pin functions, external component values, and programming interface directly in the ATSAMS70N20 documentation before layout release.

Permintaan RFG Kontak
ATSAMS70N20A-CN - 300MHz Cortex-M7 MCU | Microchip
ATSAMS70N20A-CN

ATSAMS70N20A-CN - 300MHz Cortex-M7 MCU | Microchip

The Microchip ATSAMS70N20A-CN is a 32-bit ARM Cortex-M7 flash microcontroller with a Floating Point Unit, operating up to 300 MHz, providing 1 MB of Flash and 384 KB of SRAM in a 100-ball TFBGA package measuring 9 mm by 9 mm. It combines high-speed deterministic control with extensive serial connectivity for demanding industrial, communications, and embedded-control systems. A flash microcontroller is a semiconductor device that combines a processor core, program memory, data memory, and peripherals in one integrated circuit. The ARM Cortex-M7 architecture used by the ATSAMS70N20 family supports efficient instruction execution and floating-point calculations. Within the product hierarchy, this device is a 32-bit MCU, an embedded processing semiconductor, and a member of Microchip's SAM S70 high-performance microcontroller family. The device's 300 MHz operating frequency provides substantial processing headroom for protocol handling, real-time control, and signal-processing tasks. Its 1 MB Flash stores firmware and application code, while 384 KB of SRAM supports working memory, data buffers, Ethernet frame handling, and display or communications workloads. The industrial temperature grade is identified for the ATSAMS70N20A-CN ordering configuration, and the package uses the compact LFBGA-100/TFBGA-100 form factor for high-density PCB layouts. Compared with smaller Cortex-M4 microcontrollers, the Cortex-M7 core and larger memory resources support more demanding embedded workloads while retaining a familiar embedded software model. The SAM S70 family is intended for applications requiring fast control loops and high-bandwidth peripheral traffic, particularly where communication protocols and real-time processing must coexist on one microcontroller. Typical uses include industrial automation controllers, building automation gateways, connected measurement equipment, motor-control systems, network-interface equipment, and high-speed data-acquisition nodes. The combination of 384 KB SRAM and 300 MHz execution is especially useful where multiple serial interfaces, protocol stacks, and deterministic control loops must operate without relying on a separate processor. PCB implementation should follow the manufacturer's ball assignment, land pattern, and power-decoupling guidance because the 100-ball package has fine-pitch interconnects and multiple supply requirements. Keep high-speed and sensitive signals away from noisy switching nodes, provide local bulk and high-frequency decoupling at each supply pin, and validate the assembled board for signal integrity, thermal performance, and manufacturing compatibility. This page combines the manufacturer family specifications, distributor package and memory data, and practical selection guidance with same-package alternatives for engineers evaluating the ATSAMS70N20A-CN for a new 300 MHz Cortex-M7 design.

Permintaan RFG Kontak
ATSAMS70N20B-AN 300MHz Cortex-M7 MCU 1MB | Microchip
ATSAMS70N20B-AN

ATSAMS70N20B-AN 300MHz Cortex-M7 MCU 1MB | Microchip

The Microchip ATSAMS70N20B-AN is a 32-bit single-core Arm Cortex-M7 microcontroller operating at up to 300 MHz, with 1 MB of embedded flash, 384 KB of SRAM, and a floating-point unit. It is packaged in a 100-lead LQFP measuring 14 x 14 mm and is positioned for high-performance embedded control, communications, and industrial applications. The Cortex-M7 core combines deterministic interrupt handling with single-precision floating-point arithmetic and cache-based performance for data-intensive control workloads. A microcontroller is a programmable system-on-chip that integrates a processor core, nonvolatile program memory, volatile data memory, and peripherals into one device. Within the embedded-control hierarchy, the ATSAMS70N20B-AN belongs to the 32-bit Cortex-M microcontroller class and the SAM S70 performance family. This places it above basic Cortex-M devices in clock speed, memory capacity, and application complexity while retaining the software model and peripheral ecosystem associated with embedded MCUs. Key device characteristics include a 300 MHz maximum operating frequency, 1 MB of flash organized as 1M x 8, 384 KB of SRAM, and a single 32-bit Arm Cortex-M7 processor with an FPU. The 100-LQFP package provides 100 electrical leads on a 14 x 14 mm body, supporting dense boards with high pin availability compared with smaller leaded packages. Exact electrical ratings, temperature limits, interface inventory, and clock configurations are identified in the manufacturer datasheet and product documentation. The device architecture is suited to applications that combine real-time control with substantial data processing. Its 300 MHz Cortex-M7 core can manage communication stacks, motor-control algorithms, and signal-processing loops while SRAM accommodates working data and the flash stores firmware, configuration, and calibration tables. The integrated FPU supports engineering workflows involving filtering, transforms, control computation, and floating-point sensor processing without requiring a separate accelerator. Typical uses include industrial automation controllers, high-end networked embedded systems, motor and motion control, communications equipment, and test-and-measurement instruments. The 100-LQFP footprint is particularly useful when a design requires numerous external signals without moving to a dense ball-grid-array package. Designers should confirm the exact peripheral assignments, pin multiplexing, power requirements, and startup configuration against the manufacturer pin-description table before laying out the PCB. A key design consideration is decoupling and signal integrity around the high-speed processor. Place the required bypass capacitors at their designated power pins, keep the flash and SRAM memory interface routing compact, and use continuous ground planes to control return paths. Do not infer unused or alternate-function pin behavior from the package outline; use the manufacturer pin-description table when assigning PCB tracks and connector signals. This page combines manufacturer-family specifications, package details, drop-in device options, application guidance, and design notes in a format intended for component selection and board bring-up. It highlights where the ATSAMS70N20B-AN fits within the SAM S70 family and which device parameters must be verified before layout or firmware deployment.

Permintaan RFG Kontak