Produk (22.000+)

ATSAMS70N21A-AN - 300MHz Cortex-M7 MCU | Microchip
ATSAMS70N21A-AN

ATSAMS70N21A-AN - 300MHz Cortex-M7 MCU | Microchip

The Microchip Technology ATSAMS70N21A-AN is a 32-bit ARM Cortex-M7 flash microcontroller with a Floating Point Unit, operating at up to 300 MHz, with 2048 KB of Flash and 384 KB of SRAM in a 100-pin LQFP (14 x 14 mm) package. It combines high-performance control processing with extensive embedded integration for industrial, communications, audio, robotics, and embedded-system applications. A microcontroller is a programmable semiconductor that integrates a processor core, memory, peripherals, and communication interfaces onto one device. Within the product hierarchy, the ATSAMS70N21A-AN is an ARM Cortex-M7 MCU, a 32-bit embedded processor, and a flash-based microcontroller designed to execute control software and handle real-time peripheral operations without a separate external memory interface for its program storage. The device operates at up to 300 MHz and includes a Floating Point Unit for accelerated single-precision floating-point calculations. Its 2048 KB embedded Flash supports application firmware, while 384 KB of SRAM provides working memory for real-time data processing. The 100-LQFP package exposes 100 device pins and supports compact surface-mount PCB construction. A 1.2 V or 3.3 V supply is identified for this device in product-listing information. The Cortex-M7 architecture is suited to compute-intensive embedded workloads that need deterministic control together with greater arithmetic throughput than smaller microcontroller cores. Its integrated memory reduces the need for external program storage, while the parallel peripheral set allows the device to service communications, timers, analog interfaces, and external memory-control functions. The 300 MHz operating limit should be treated as a maximum device rating, with actual clocking determined by the power configuration and operating conditions. Typical uses include industrial control equipment, connected factory nodes, audio processing, high-speed communications infrastructure, test and measurement systems, robotics, and embedded IoT controllers. Engineers commonly pair this MCU with external transceivers, memory, sensors, and power regulators when the application requires connectivity or precision analog measurement beyond the integrated peripherals. Board design must preserve the LQFP land pattern, power and decoupling requirements, clock stability, and exposed signal constraints specified by Microchip. Confirm pin multiplexing, peripheral availability, voltage tolerances, and package dimensions against the manufacturer documentation before committing a PCB footprint. The ATSAMS70N21A-AN should be selected when its Cortex-M7 performance, memory capacity, and 100-LQFP interface set match the required embedded architecture.

Permintaan RFG Kontak
ATSAMS70N21A-CN - 300MHz Cortex-M7 MCU | Microchip
ATSAMS70N21A-CN

ATSAMS70N21A-CN - 300MHz Cortex-M7 MCU | Microchip

The Microchip Technology ATSAMS70N21A-CN is a 32-bit ARM Cortex-M7 flash microcontroller operating up to 300 MHz, with 2 MB of program Flash, 384 KB of SRAM, and a 100-ball TFBGA package measuring 9 mm by 9 mm. It belongs to the SAM S70 family of high-performance embedded processors and includes a floating-point unit for real-time, floating-point control workloads. A flash microcontroller is a semiconductor device that combines a processor core, embedded program memory, data memory, and peripherals on one integrated circuit. The ATSAMS70N21A-CN sits within the hierarchy of embedded microcontroller, 32-bit MCU, ARM Cortex-M7 processor, and flash-memory system controller. Its combination of 300 MHz processing speed and 2 MB of internal Flash makes it suitable for control-intensive products that need substantial local program storage without an external memory device. Key characteristics include 2 MB of Flash organized as 2M x 8, 384 KB of SRAM, a 32-bit single-core architecture, and operation from 1.8 V, 2.5 V, or 3.3 V according to the manufacturer listings. The device provides 75 I/O in the 100-ball package, allowing integration of communications, control signals, analog inputs, and external interfaces while retaining a compact 9 mm by 9 mm surface-mount footprint. The ARM Cortex-M7 core includes an FPU and supports a high clock rate for applications involving motor control, industrial automation, networking, graphics, and embedded user interfaces. The manufacturer identifies the ATSAMS70N21 devices as members of the SAM S70 flash-microcontroller family. Internal SRAM is especially useful for buffering network frames, protocol stacks, display data, or real-time control variables without relying on slow external memory for every access. Typical applications include industrial factory controllers, high-speed communication gateways, precision motion-control systems, connected sensors, medical monitoring equipment, and compact embedded computing platforms. The 100-TFBGA package minimizes board area but requires careful PCB layout and manufacturing support because its fine-pitch ball grid cannot be hand soldered with conventional through-hole techniques. A critical design consideration is the relationship between operating voltage, clock rate, and thermal performance. Review the maximum operating frequency for the selected supply voltage in the manufacturer datasheet, and verify all power rails during startup and shutdown. The TFBGA package also requires a properly designed footprint, fine-pitch assembly process, adequate thermal design, and thorough signal-integrity review. This product summary combines the manufacturer device-page information with practical package, procurement, comparison, and PCB-design guidance. It helps engineers evaluate the ATSAMS70N21A-CN against same-package alternatives while separating true electrical compatibility from differences in memory density, temperature grade, or delivery format.

Permintaan RFG Kontak
ATSAMS70N21B-AN - 300MHz Cortex-M7 MCU | Microchip
ATSAMS70N21B-AN

ATSAMS70N21B-AN - 300MHz Cortex-M7 MCU | Microchip

The Microchip Technology ATSAMS70N21B-AN is a high-performance 32-bit ARM Cortex-M7 flash microcontroller operating at up to 300 MHz, with 2 MB of embedded flash memory and 384 KB of SRAM, housed in a 100-lead LQFP package measuring 14 x 14 mm. It is designed for embedded systems requiring high-speed control, substantial local code storage, and deterministic real-time operation. A flash microcontroller is a semiconductor that combines a processor core, nonvolatile program memory, volatile data memory, and integrated peripherals on one device. The ATSAMS70N21B-AN belongs to the SAM S70 microcontroller family within Microchip's broader embedded-processing portfolio. Its ARM Cortex-M7 processor includes a Floating Point Unit, supporting efficient arithmetic and control algorithms without requiring a separate processor. The principal device characteristics include a maximum clock frequency of 300 MHz, 2 MB of flash organized as 2M x 8, and 384 KB of SRAM. The integrated flash allows firmware and application code to reside locally, while the SRAM supports real-time data, graphics, protocol stacks, and control-loop working sets. Its 100-LQFP package provides 100 external leads for interface access and is suitable for multilayer PCB assembly. The ATSAMS70N21B-AN combines a high-performance CPU core with extensive embedded resources in a single package. This makes it appropriate for control systems that must execute multiple tasks while maintaining responsive peripheral servicing. Local flash storage also reduces the system-level dependence on external nonvolatile memory for firmware storage, while the large SRAM can reduce transfers over external memory buses. Typical applications include industrial factory automation, networked embedded controllers, high-end audio equipment, industrial communications equipment, and compact data-acquisition systems. In each case, the 300 MHz Cortex-M7 core can execute computationally intensive control or signal-processing tasks, while the integrated 2 MB flash supports a substantial firmware image and the 384 KB SRAM accommodates active data. PCB design should account for the thermal requirements of the LQFP package and place decoupling capacitors close to the appropriate supply pins. Designers should also use the manufacturer's pin-description table when assigning tracks and confirm signal-level, clock, reset, and peripheral constraints before committing the layout. This product data organizes the verified device identity, commercial information, pinout guidance, application context, and drop-in replacement analysis into an engineering-focused reference. It also distinguishes electrically similar family members from parts that cannot be treated as true PCB drop-in replacements.

Permintaan RFG Kontak
ATSAMS70Q19A-AN - 300MHz Cortex-M7 MCU | Microchip
ATSAMS70Q19A-AN

ATSAMS70Q19A-AN - 300MHz Cortex-M7 MCU | Microchip

The Microchip ATSAMS70Q19A-AN is a 32-bit ARM Cortex-M7 flash microcontroller operating at up to 300 MHz, with 512 KB of Flash memory, 256 KB of SRAM, and a 144-pin LQFP package measuring 20 mm by 20 mm. It combines a high-performance Cortex-M7 processor with an integrated floating-point unit for demanding control, networking, graphics, and signal-processing applications. A microcontroller is a programmable system-on-chip that integrates a processor core, nonvolatile program memory, volatile working memory, peripherals, and communication interfaces. The ATSAMS70 belongs to the SAM S70 family, a 32-bit embedded-control hierarchy built around the ARM Cortex-M7 architecture. Compared with an 8- or 16-bit MCU, this device supports larger firmware, richer real-time workloads, and substantially greater arithmetic throughput. Key device attributes include a 300 MHz maximum operating frequency, 512 KB of Flash, and 256 KB of SRAM. According to Microchip, the device uses a high-performance 32-bit ARM Cortex-M7 processor with a Floating Point Unit. The combination is useful for control loops that must remain responsive while executing protocol stacks, image processing, or floating-point calculations. Its 144-pin LQFP package also provides a comparatively high peripheral count for demanding embedded systems. The product is based on the Cortex-M7 architecture and includes a floating-point unit, enabling efficient single- and double-precision arithmetic alongside general-purpose embedded control. This architecture is suitable when an application must combine deterministic peripheral access with higher-level computation, but a more complex application processor is unnecessary. Its large memory footprint helps separate application code, graphics data, communications buffers, and real-time workloads. Typical ATSAMS70Q19A-AN applications include industrial automation, connected industrial equipment, high-end human-machine interfaces, audio and communications control, test and measurement systems, and embedded graphics or control nodes. The 300 MHz Cortex-M7 core provides processing headroom for EtherCAT or similar industrial communication duties, while the SRAM capacity can reduce pressure from external memory in data-intensive control systems. Designers should verify the exact pin assignments, power rails, decoupling requirements, clock configuration, and peripheral multiplexing in the Microchip pin-description tables before laying out the PCB. The 144-pin LQFP footprint requires careful escape routing, and firmware should be tested for the intended operating temperature, supply range, and peripheral combinations rather than relying only on the processor headline frequency. This product page combines the manufacturer's architectural description with practical selection, application, packaging, and drop-in replacement guidance. It focuses attention on the factors that determine PCB compatibility and firmware fit: the 144-lead LQFP footprint, Cortex-M7 core, memory capacity, package suffix, and family-specific peripheral behavior.

Permintaan RFG Kontak
ATSAMS70Q19B-AN - 300MHz Cortex-M7 MCU | Microchip
ATSAMS70Q19B-AN

ATSAMS70Q19B-AN - 300MHz Cortex-M7 MCU | Microchip

The Microchip ATSAMS70Q19B-AN is a high-performance 32-bit ARM Cortex-M7 flash microcontroller operating up to 300 MHz, with 512 KB of embedded Flash and 256 KB of SRAM in a 144-pin LQFP package measuring 20 mm by 20 mm. It combines a floating-point processing core with extensive embedded peripherals for demanding control, communications, audio, and industrial applications. A flash microcontroller is a semiconductor device that integrates a processor core, program memory, data memory, and peripherals into one package. The ATSAMS70Q19 family belongs to the hierarchy of embedded MCU, 32-bit microcontroller, ARM Cortex-M microcontroller, and flash-memory MCU. Its Cortex-M7 processor provides substantially more computation than an 8-bit or basic 16-bit MCU while retaining the deterministic, low-power characteristics required by embedded systems. Key features include a 300 MHz maximum operating frequency, 512 KB of Flash memory, and 256 KB of SRAM. The 144-LQFP package provides 114 I/O pins, enabling substantial connectivity for external memory, communication interfaces, analog conversion, timers, and mixed-signal control systems. The manufacturer identifies the family as operating with a 32-bit ARM Cortex-M7 processor and Floating Point Unit. A distributor technical summary lists a 1.7 V to 3.6 V operating range. The device architecture makes the ATSAMS70Q19 suitable for real-time control workloads that require more processing capacity than a conventional microcontroller. Hardware floating-point support can accelerate control algorithms, digital filtering, and floating-point math, while the large SRAM reduces pressure on external memory during signal processing. The high pin count also allows designers to integrate multiple interfaces without sacrificing the familiar surface-mount LQFP assembly process. Typical applications include industrial automation and factory control, networked embedded gateways, high-end audio and communications equipment, test and measurement systems, and motor-control platforms. The ATSAMS70Q19B-AN is appropriate when a design requires high clock speed, generous local memory, extensive I/O, and deterministic embedded processing in a single package. For new designs, select decoupling capacitors and signal-integrity layouts from the manufacturer pin and application guidance. Verify the complete pin description, alternate-function matrix, and package drawing before routing the 144-pin footprint. Confirm the clock, memory, power, and peripheral configuration against the current Microchip datasheet. This page combines the manufacturer family description, exact-MPN distributor records, package information, practical design guidance, and a constrained replacement assessment. It distinguishes the directly documented configuration from unverified parameters and identifies where a PCB-compatible substitution requires manufacturer confirmation.

Permintaan RFG Kontak
ATSAMS70Q20A-AN - 300MHz Cortex-M7 MCU, 1MB Flash | Microchip
ATSAMS70Q20A-AN

ATSAMS70Q20A-AN - 300MHz Cortex-M7 MCU, 1MB Flash | Microchip

The Microchip ATSAMS70Q20A-AN is a 32-bit ARM Cortex-M7 microcontroller with Floating Point Unit (FPU), running up to 300 MHz, featuring 1 MB of Flash and 384 KB of SRAM in a 144-pin LQFP package. This SAM S70 family device delivers 1500 CoreMark / 600 DMIPS performance and integrates rich connectivity including HS USB, Ethernet, CAN-FD, and a TFT LCD controller, making it suitable for high-performance embedded graphics and audio applications. What is a Cortex-M7 microcontroller? A Cortex-M7 MCU is a 32-bit RISC processor from ARM designed for deterministic real-time control with DSP extensions and a hardware single-precision/double-precision FPU. It sits in the hierarchy ARM Cortex-M -> 32-bit MCU -> microcontroller -> embedded processor, and is typically chosen when developers need sub-200ns interrupt latency, SIMD DSP, and large code/RAM footprints for graphical or audio signal chains. Key features include 16 KB of ICache and 16 KB of DCache, a Multi-Port SRAM architecture, two 12-bit AFEC ADCs up to 1.5 Msps, USB 2.0 High-Speed with on-chip PHY, 10/100 Ethernet MAC with 1588 PTP support, a 2D graphics LCD TFT controller with overlay, a hardware cryptographic accelerator (AES, TRNG), and 8/16-bit external bus interface (EBI) for SDRAM/NAND/NOR expansion. The device also embeds a Floating Point Unit that natively executes single- and double-precision IEEE 754 operations. The ATSAMS70Q20A-AN employs a Harvard-bus implementation with a tightly-coupled TCM block, deterministic 4-cycle interrupt entry, and a system controller that handles clock, reset, and brown-out supervision. Its peripheral set includes CAN-FD, four I2S ports for audio codec interfacing, an image sensor interface (ISI), a camera interface, and up to 119 GPIOs. Engineering trade-offs include higher dynamic power at 300 MHz than Cortex-M4 parts and a 144-LQFP footprint that requires careful power-plane design. Typical applications span industrial motor control, industrial HMI / TFT panels, point-of-sale terminals, audio amplification systems, automotive infotainment prototyping, building-automation gateways, and IoT edge nodes that demand on-the-fly TLS handshake acceleration via the integrated crypto engine. The wide 3.0V to 3.6V supply and 1.7V to 3.6V IO tolerance also let it co-exist with 1.8V sensors. When designing with this MCU, place four 0.1 µF + 1 µF decoupling pairs near the VDDIO/VDDCORE pin groups, route the 12 MHz crystal traces symmetrically, and use a 4-layer backup across IC pin groups to keep the high-speed USB and Ethernet impedance at 90 Ω differential. Provide a 32.768 kHz low-power crystal on the XIN32/XOUT32 pads if RTC wake-from-backup is required. This page synthesizes distributor pricing, drop-in alternatives sourced from Microchip cross-reference data, and practical design notes not consolidated in the manufacturer datasheet.

Permintaan RFG Kontak
ATSAMS70Q20A-CN - 300MHz Cortex-M7 MCU | Microchip
ATSAMS70Q20A-CN

ATSAMS70Q20A-CN - 300MHz Cortex-M7 MCU | Microchip

The Microchip Technology ATSAMS70Q20A-CN is a 32-bit ARM Cortex-M7 microcontroller operating at up to 300 MHz, with 1 MB of Flash memory and 384 KB of SRAM in a 144-LFBGA package measuring 10 x 10 mm. It operates from 1.08 V to 3.6 V and is supplied in a tray package. The controller is designed for high-performance embedded applications that require substantial local memory and an efficient 32-bit processing architecture. A microcontroller is a programmable semiconductor that integrates a processor core, memory, and peripheral interfaces onto one device. The ATSAMS70Q20A-CN belongs to the SAM S70 family and combines an ARM Cortex-M7 core with 1 MB of Flash and 384 KB of SRAM. Its 300 MHz operating speed positions it for demanding control, communications, and data-processing tasks rather than simple low-cost sensing nodes. The principal device characteristics include a 32-bit ARM Cortex-M7 processor, a maximum clock frequency of 300 MHz, 1 MB of 1M x 8 Flash memory, and 384 KB of SRAM. The operating voltage spans 1.08 V to 3.6 V. These attributes give a designer ample memory for firmware, configuration data, working state, and protocol buffers while supporting a compact 10 x 10 mm BGA footprint. The ATSAMS70Q20A-CN is identified as an active Microchip Technology product and is listed as ROHS3 compliant. Its package is a 144-LFBGA, and the exact ordering configuration is associated with tray packaging. One distributor listing reports a minimum order quantity of one and a lead time of 21 weeks, making early sourcing and production planning important for scheduled builds. Typical engineering roles include industrial equipment control, embedded communications, data acquisition, human-machine interfaces, and connected industrial products. The 1 MB Flash capacity is useful for firmware and boot logic, while 384 KB of SRAM supports buffering and real-time workloads. Confirm the complete peripheral, pin, electrical, and software requirements against the manufacturer documentation before releasing a PCB or production design. For a new layout, use the 144-LFBGA land pattern and pin-assignment information from the manufacturer documentation rather than inferring connectivity from a generic BGA library. Validate power, ground, decoupling, signal integrity, exposed-pad requirements, and programming or debug access on the assembled PCB. Firmware validation should also confirm startup behavior and peripheral operation across the intended voltage and temperature conditions. This product record combines the exact manufacturer identifiers and distributor attributes with practical sourcing, packaging, layout, and replacement guidance. It also distinguishes documented facts from parameters that must be checked in the manufacturer datasheet, helping engineers make a technically sound decision without confusing a family-level MCU with a confirmed pin-compatible substitute.

Permintaan RFG Kontak
ATSAMS70Q20B-AN - 300MHz Cortex-M7 MCU | Microchip
ATSAMS70Q20B-AN

ATSAMS70Q20B-AN - 300MHz Cortex-M7 MCU | Microchip

The Microchip Technology ATSAMS70Q20B-AN is a 32-bit ARM Cortex-M7 SAM S70 microcontroller operating at up to 300 MHz, with 1 MB of Flash memory and 384 KB of SRAM in a 144-lead LQFP package measuring 20 mm by 20 mm. It combines high-performance Cortex-M7 processing with extensive embedded peripherals for control, communications, human-machine interface, and connected industrial equipment. A microcontroller, or MCU, is a single integrated circuit containing a processor core, memory, I/O ports, timers, communication controllers, and analog or mixed-signal peripherals. The SAM S70 family belongs to the hierarchy of embedded MCU, 32-bit RISC processor, ARM Cortex-M microcontroller, and embedded processing platform. Its large memory and high clock rate allow designers to consolidate control functions that might otherwise require separate logic devices and programmable logic. The ATSAMS70Q20B-AN features 1 MB of programmable Flash, 384 KB of SRAM, and a maximum 300 MHz operating frequency. According to the Microchip product listing, the device is a 32-bit Cortex-M7 controller in a 144-LQFP package. Its combination of memory capacity and processor performance supports responsive control loops, graphical human-machine interfaces, communications protocol handling, and embedded applications requiring substantial working memory. The Cortex-M7 architecture supports an instruction set optimized for embedded control, while the SAM S70 peripheral set can reduce the need for discrete support circuits. Practical designs still require attention to clock configuration, memory interfaces, peripheral pin multiplexing, and the electrical characteristics of each communication or analog peripheral. Because the device exposes many functions through a 144-pin package, a disciplined board plan is important for separating sensitive analog routes, high-speed signals, and power distribution. Typical uses include industrial automation controllers, factory communication equipment, building-control systems, medical and diagnostic instruments, data acquisition equipment, and human-machine interface controllers. The 1 MB Flash capacity can hold application firmware and configuration data, while 384 KB of SRAM supports buffers, protocol stacks, display data, and real-time control state. For PCB design, place the MCU and decoupling network close to their power pins, route high-speed signals according to the pin-description and layout guidance in the manufacturer datasheet, and preserve a continuous return path beneath clock and communication interfaces. Firmware developers should also confirm the peripheral instance, interrupt configuration, and package pin assignment for every board revision before committing the layout. This page combines the manufacturer product specifications, sourcing information, package constraints, practical design guidance, and an explicit analysis of drop-in alternatives. It helps engineers evaluate the ATSAMS70Q20B-AN not only as a 300 MHz Cortex-M7 MCU, but also as a complete embedded control platform with defined memory, package, peripheral, and sourcing characteristics.

Permintaan RFG Kontak
ATSAMS70Q21A-CN - 300MHz Cortex-M7 MCU | Microchip Technology
ATSAMS70Q21A-CN

ATSAMS70Q21A-CN - 300MHz Cortex-M7 MCU | Microchip Technology

The Microchip Technology ATSAMS70Q21A-CN is a 32-bit ARM Cortex-M7 flash microcontroller with a floating-point unit, operating at up to 300 MHz and providing 2 MB of program Flash memory in a 144-LFBGA (10 x 10 mm) package. The device belongs to the SAMS70 family, combining high-speed Cortex-M7 processing with up to 384 KB of multi-port SRAM, including up to 256 KB that can be assigned to tightly coupled memory for zero-wait-state operation at 300 MHz. A microcontroller is a programmable semiconductor that integrates a processor core, memory, peripherals, and communication interfaces into one device. The ATSAMS70Q21A-CN belongs to the ARM Cortex-M7 microcontroller hierarchy, a 32-bit embedded processor family suited to control, communications, and real-time signal-processing systems. Its Floating Point Unit accelerates calculations that would otherwise require software integer sequences, while its multi-port SRAM architecture supports concurrent instruction execution, data transfer, and peripheral activity. The SAMS70 family combines 300 MHz processing performance with 2 MB of Flash and as much as 384 KB of SRAM. Up to 256 KB of SRAM can be configured as tightly coupled memory, supporting predictable zero-wait-state instruction and data access at the maximum operating frequency. This is particularly valuable in control loops and communications firmware where deterministic memory access is more important than large nonvolatile storage. The 144-LFBGA package provides 144 connection positions in a compact 10 x 10 mm footprint. The small land pattern supports dense industrial, communications, and embedded-control assemblies, although PCB escape routing, thermal management, and manufacturing inspection require careful planning. A low-pin-count alternative with the same memory architecture may be easier to assemble, but it can provide fewer external interfaces and less routing flexibility. Typical uses include industrial automation, motor and motion control, communications infrastructure, data acquisition, test and measurement equipment, and embedded human-machine interfaces. The Cortex-M7 core and floating-point support are useful for control algorithms, protocol processing, signal filtering, and graphical or communications workloads that benefit from predictable high-speed execution. Designers should base pin assignment and PCB layout on the manufacturer’s 144-LFBGA pinout and package drawings. Keep high-speed interfaces away from noisy switching nodes, provide continuous power and ground-plane connections, and verify decoupling, signal integrity, and thermal requirements against the operating conditions of the finished assembly. This page organizes the ATSAMS70Q21A-CN specifications, verified sourcing records, candidate drop-in alternatives, comparison parameters, and practical design guidance into a concise engineering reference for component selection and PCB planning.

Permintaan RFG Kontak
ATSAMS70Q21B-AN - 300MHz Cortex-M7 MCU 2MB Flash | Microchip
ATSAMS70Q21B-AN

ATSAMS70Q21B-AN - 300MHz Cortex-M7 MCU 2MB Flash | Microchip

The Microchip ATSAMS70Q21B-AN is a 32-bit ARM Cortex-M7 microcontroller from the SAM S70 family, featuring a 300 MHz CPU core with Floating Point Unit (FPU), 2 MB of Flash program memory, and 384 KB of SRAM, packaged in a 144-pin LQFP (20x20 mm). It operates from a 1.08V to 1.32V core supply and is qualified for industrial temperature ranges of -40C to +105C, making it suitable for demanding embedded applications. An ARM Cortex-M7 microcontroller is a high-performance 32-bit RISC processor designed for deterministic real-time control and signal processing. The M7 architecture includes a double-precision FPU, SIMD instructions, and tightly coupled memory, sitting above Cortex-M4 and below Cortex-A application processors in the ARM embedded hierarchy. Within Microchip's SAM family, the S70 series targets high-performance motor control, industrial automation, and audio/graphics applications where the M7's DSP extensions deliver substantial throughput advantages over M4 designs. Key features of the ATSAMS70Q21B-AN include 114 programmable I/O lines, a 16-bit external bus interface with 24-bit address bus, multiple PWM channels for motor and power control, a high-speed ADC, multiple DMA channels for low-overhead data movement, and a DAC for analog output generation. The peripheral set also includes USB, CAN, Ethernet MAC, and high-speed serial interfaces, supporting connected industrial designs. The device integrates a 6-layer bus matrix with separate bridges for I/O and peripheral DMA, enabling parallel data movement without CPU intervention. The M7 core's branch prediction, instruction cache, and tightly coupled RAM deliver sustained 300 MHz performance with single-cycle SRAM access, enabling real-time DSP workloads such as field-oriented motor control and audio processing at sample rates well above 100 kHz. Typical applications include industrial motor drives (FOC for BLDC/PMSM), factory automation controllers, building automation HMI panels, audio processing systems, and connected IoT edge nodes. The combination of large memory, rich peripherals, and industrial temperature range makes it a strong fit for systems previously served by mid-range DSPs or higher-end Cortex-M4 parts. When designing with this MCU, ensure the 144-LQFP PCB layout accommodates the 0.5 mm pitch footprint and provides adequate thermal copper for high-clock-current transients. Decoupling must follow the manufacturer's reference schematic with bulk, mid-frequency, and high-frequency ceramics placed close to each supply pin pair. This page synthesizes verified distributor pricing, drop-in alternatives drawn from the same SAM S70/SAM E70 family, and practical design notes that go beyond the manufacturer datasheet to support sourcing and engineering decisions.

Permintaan RFG Kontak
ATSAMS70Q21B-ANT - 300MHz Cortex-M7 MCU 2MB Flash 144-LQFP | Microchip
ATSAMS70Q21B-ANT

ATSAMS70Q21B-ANT - 300MHz Cortex-M7 MCU 2MB Flash 144-LQFP | Microchip

The Microchip Technology ATSAMS70Q21B-ANT is a 32-bit ARM Cortex-M7 microcontroller with FPU operating at up to 300 MHz, integrating 2 MB of Flash and 384 KB of SRAM in a 144-pin LQFP (20x20 mm) package with 114 user I/O lines. It belongs to the SAM S70 family of high-performance flash microcontrollers designed for connected and industrial applications requiring Ethernet connectivity, high-speed connectivity, and rich peripherals. What is a Cortex-M7 microcontroller? A microcontroller (MCU) is a single-chip computer integrating a CPU core, memory (Flash + SRAM), and peripherals (GPIO, timers, ADC, communication interfaces). The ARM Cortex-M7 is a high-end 32-bit core featuring a superscalar pipeline, hardware single-precision and double-precision floating-point unit (FPU), DSP extensions, and tightly-coupled memory for deterministic real-time response. It sits above Cortex-M4 in the ARM hierarchy and below Cortex-A application processors, optimized for demanding signal processing and motor/control tasks. Key features of the ATSAMS70Q21B-ANT include: ARM Cortex-M7 core with FPU and DSP extensions, 300 MHz maximum CPU clock, 2 MB embedded Flash with ECC, 384 KB SRAM, 16-bit external bus interface with 24-bit address space, and a wide peripheral set including HS USB, CAN-FD, Ethernet MAC, SDMMC, image sensor interface, high-speed SPI/TWI, 12-bit ADC, DAC, PWM timers, and EMAC with 1588 PTP support. The device is built on an ultra-low-power process and supports 1.08 V to 1.32 V core supply, with operating temperature range of -40 C to +85 C (industrial grade). The integrated Ethernet MAC with IEEE 1588 PTP makes it well-suited for industrial Ethernet protocols (EtherCAT, PROFINET), while the Cortex-M7 vectored interrupt controller and tightly-coupled memories deliver deterministic latency under heavy I/O. Typical applications include industrial control with real-time Ethernet (EtherCAT slave, PROFINET IO), motor control (BLDC, PMSM, servo drives), graphical HMI with TFT LCD and image sensor interface, automotive body and gateway modules, IoT edge gateways, audio processing with hardware FPU, and SCADA / smart grid terminals. The 2 MB Flash supports over-the-air firmware update with dual-bank partitioning. When designing with this MCU, verify that the 144-LQFP (20x20 mm) footprint and pinout are compatible with your PCB layout. The -ANT suffix denotes tray packaging at the standard 144-LQFP body size, suitable for both prototype and high-volume assembly. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

Permintaan RFG Kontak
ATSAMS70Q21B-CN - 300MHz Cortex-M7 2MB MCU | Microchip
ATSAMS70Q21B-CN

ATSAMS70Q21B-CN - 300MHz Cortex-M7 2MB MCU | Microchip

The Microchip ATSAMS70Q21B-CN is a 32-bit ARM Cortex-M7 flash microcontroller operating up to 300 MHz, with 2 MB of program flash and 384 KB of SRAM in a 144-pin LFBGA package measuring 10 mm by 10 mm. It belongs to the SAM S70 family of high-performance microcontrollers and includes a single-precision floating point unit for real-time control, industrial networking, and connected embedded systems. A flash microcontroller is a microcontroller that stores its application program in embedded nonvolatile flash memory rather than requiring an external memory device. Within the device hierarchy, the ATSAMS70Q21B-CN sits at the MCU level, uses the ARM Cortex-M7 processor core, and combines the core with memory, clock, communications, analog, and timer peripherals in one integrated package. The principal advantages of this device are its 300 MHz processing rate, 2 MB flash configuration, 384 KB SRAM, and 144-pin LFBGA integration. The Cortex-M7 architecture includes a floating point unit, while the large SRAM capacity supports buffering, graphics, protocol stacks, and real-time data processing without relying on external memory for working data. The manufacturer product page confirms operation up to 300 MHz and flash capacity up to 2048 KB. The S70Q21 family is designed for embedded applications that need more processing headroom than typical Cortex-M0 or Cortex-M4 devices. Its combination of high clock speed, SRAM, flash, and a dense package supports control loops, communications gateways, human-machine interfaces, and test equipment. The exact peripheral configuration, electrical limits, operating-temperature grades, and interface mix should be confirmed in the manufacturer data sheet for the specific package variant before schematic capture. Typical uses include industrial automation controllers, Ethernet-connected equipment, motor-control systems, instrumentation, and high-speed data acquisition. Because the LFBGA package requires dense PCB routing and controlled thermal design, it is most appropriate for multilayer boards with a defined land pattern and established assembly process rather than prototype boards with limited routing density. The primary design consideration is package-level complexity: a 144-pin LFBGA has a small 0.5 mm-class ball pitch and leaves little routing tolerance. Use the manufacturer land pattern, place decoupling capacitors close to supply pins, maintain the recommended layer-stack and via rules, and validate assembly capability with the chosen board fabricator. Confirm the exact pin functions in the pin-description table before assigning nets. This page organizes the core S70Q21 specifications, same-footprint alternatives, and practical design guidance in one engineering-focused reference. It helps designers evaluate processor performance, memory capacity, package constraints, and migration options before committing the ATSAMS70Q21B-CN to a new design.

Permintaan RFG Kontak
ATSAMV70Q20B-CB - ARM Cortex-M7 300MHz MCU, 1MB Flash | Microchip
ATSAMV70Q20B-CB

ATSAMV70Q20B-CB - ARM Cortex-M7 300MHz MCU, 1MB Flash | Microchip

The Microchip Technology ATSAMV70Q20B-CB is an ARM Cortex-M7 microcontroller in the SAM V70 automotive family, featuring a single-core 32-bit processor with double-precision FPU running at up to 300 MHz, paired with 1 MB of Flash and 384 KB of SRAM in a 144-pin TFBGA (10x10 mm) package. It is qualified to the AEC-Q100 automotive reliability standard and integrates high-speed connectivity including Ethernet, CAN-FD, USB, and a 16-bit HSMCI SD-card interface. The device is targeted at automotive body, chassis, and gateway ECUs where deterministic real-time performance and a rich peripheral set are mandatory. An ARM Cortex-M7 MCU is a 32-bit microcontroller built on the ARMv7-M architecture with a deeply pipelined core that delivers 2.14 CoreMark/MHz performance, a hardware double-precision floating-point unit, single-precision and double-precision SIMD instructions, and tightly-coupled memory for low-latency code and data access. It sits within the broader taxonomy of MCU -> embedded microcontroller -> SoC -> semiconductor. The Cortex-M7 family supersedes Cortex-M4 by adding cache controllers, branch prediction, and dual-issue capability, making it the highest-performance mainstream Cortex-M part before moving into Cortex-M33/M55 secure islands. Key features include 1 MB (1M x 8) embedded Flash, 384 KB of multi-port SRAM, an MPU for memory protection, 16-bit SDRAM and 8/16-bit PSRAM external bus interface, an image sensor interface, an advanced 16-bit sigma-delta ADC with up to 24 channels, and a hardware crypto accelerator (TRNG, AES, SHA, RSA). The on-chip peripherals include 8-bit/16-bit image sensor interface (ISI), 12-bit DAC, 16-bit timers, PWM, I2S, I2C, SPI, UART/USART, and high-speed USB with integrated PHY. The 144-TFBGA package offers compact 10x10 mm footprint while exposing up to 88 GPIOs. The architectural depth of SAM V70 lies in its Cortex-M7 core, which integrates an L1 instruction cache and branch target address cache to mitigate Flash wait-state penalties at 300 MHz, while the multi-port SRAM bank allows parallel DMA, Ethernet, and code execution without bus contention. The peripheral event system (PDMA, AFEC) and an interrupt controller with configurable priorities allow deterministic sub-microsecond response on critical tasks such as motor control or CAN-FD message handling. An integrated flexible 8- to 16-bit external bus interface (EBI) simplifies expansion to SDRAM or QSPI Flash. Typical applications include automotive body controllers, HVAC panels, LED matrix drivers, industrial PLCs, motor-control front-ends, and IoT gateways that require Ethernet + CAN-FD co-existence. The device is also a strong fit for human-machine-interface (HMI) panels with TFT-LCD support, audio infotainment nodes, and CAN/LIN gateways. When designing with this part, designers should provision an external LDO or DC-DC for the 1.2V core rail and follow Microchip's Atmel Studio/Microchip Studio pin-mux configuration to avoid peripheral conflict on shared I/O lines. The part uses an automotive-grade process and is PPAP-capable.

Permintaan RFG Kontak
ATSAMV71N20B-CBT - 300MHz Cortex-M7 MCU 1MB Flash | Microchip
ATSAMV71N20B-CBT

ATSAMV71N20B-CBT - 300MHz Cortex-M7 MCU 1MB Flash | Microchip

The Microchip ATSAMV71N20B-CBT is an automotive-grade 32-bit microcontroller based on the ARM Cortex-M7 core with double-precision FPU, running at up to 300MHz with 1MB (1M x 8) embedded Flash and 384KB SRAM, supplied in a 100-ball TFBGA (9x9 mm) package. Per Microchip, the SAM V71 family is manufactured under ISO-TS-16949 requirements and qualified to AEC-Q100 for automotive applications. A microcontroller (MCU) is a single-chip embedded processor that integrates a CPU core, memory, and peripherals into one device, forming the highest-volume class of embedded processing ICs used across automotive, industrial, and consumer systems. The SAM V71 sits at the high-performance end of the MCU hierarchy, positioned above general-purpose Cortex-M4 devices by its superscalar Cortex-M7 pipeline delivering 5.04 CoreMark/MHz. Key features include a 300MHz core with cache acceleration, dual 16-bit 2Msps ADCs, Ethernet MAC with AVB support for automotive audio-video bridging, dual CAN interfaces, I2S for digital audio, USB high-speed device/host, and multiple USART/SPI/TWI peripherals. The LCD controller-capable parallel capture interface and SDRAM/SDIO support enable graphics and data-logging designs. Architecturally, the Cortex-M7 core pairs a six-stage dual-issue pipeline with tightly-coupled memory (TCM) and configurable instruction/data caches, allowing deterministic execution for motor control and audio DSP workloads. The double-precision FPU accelerates control-loop math, while embedded Flash with ECC supports functional-safety-oriented designs. Typical applications include automotive gateway and body controllers, industrial automation and motor control, and Ethernet AVB audio/video networking. The combination of 300MHz throughput, hardware Ethernet, and dual CAN makes it a strong single-chip solution for connected embedded nodes. Design consideration: ensure a clean 3V to 3.6V supply with proper decoupling at all VDDIO/VDDCORE pins, and verify BGA escape-routing capability before committing to the 100-TFBGA footprint; pricing shown as of 2026-08-29.

Permintaan RFG Kontak
ATSAMV71N21B-CB - 300MHz Cortex-M7 MCU | Microchip
ATSAMV71N21B-CB

ATSAMV71N21B-CB - 300MHz Cortex-M7 MCU | Microchip

The Microchip ATSAMV71N21B-CB is an automotive 32-bit ARM Cortex-M7 flash microcontroller operating up to 300 MHz, with 2 MB of flash memory, a double-precision floating-point unit, and a 100-pin TFBGA package measuring 9 x 9 mm. It combines high-performance control processing with automotive-oriented features in the SAM V71 family. An automotive flash microcontroller is a semiconductor device that executes embedded control software from nonvolatile program memory while integrating peripherals for communications, timing, data acquisition, and digital control. Within the product hierarchy, the ATSAMV71N21B-CB is an ARM Cortex-M7 microcontroller, a 32-bit embedded processor within the SAM V71 automotive MCU family and the broader microcontrollers category. The principal device attributes are a 300 MHz maximum operating frequency, 2 MB of flash memory, a Cortex-M7 core with double-precision FPU, and a 100-TFBGA package. These specifications suit applications requiring substantial control-loop calculation, connected equipment, graphical or communications support, and deterministic real-time behavior. The target is identified as an automotive-grade flash MCU, while the B suffix denotes the device configuration identified by Microchip. The Cortex-M7 architecture supports efficient real-time execution, while the floating-point unit accelerates mathematical operations commonly found in motor control, signal processing, communications, and industrial automation. The 2 MB embedded flash provides room for application code, configuration data, and boot routines. The 100-TFBGA package also supports high-density PCB integration, although its fine ball pitch requires careful component placement and board-layout planning. Typical applications include industrial automation, networked control equipment, motor-control systems, communications gateways, and embedded human-machine-interface controllers. The high clock rate and floating-point capability benefit applications that combine peripheral handling with computationally intensive control tasks. Automotive qualification requirements should also be checked against the complete system design rather than assumed from the family description alone. PCB implementation requires attention to high-speed signal integrity, clean power and ground distribution, and thermal performance at the 9 x 9 mm TFBGA. Decoupling capacitors should be placed directly beside the relevant supply pins, and routing should minimize loops through supply-return paths. Firmware development is supported by the Microchip MPLAB X environment identified for the ATSAMV71N21B and ATSAMV71N21B families. This product page consolidates the manufacturer family description, package details, sourcing information, verified drop-in alternatives, application guidance, and design considerations. It also distinguishes confirmed package-compatible options from comparison candidates that would require a different footprint or an engineering review before substitution.

Permintaan RFG Kontak
ATSAMV71Q21B-AAB - 300MHz Cortex-M7 MCU 2MB Flash | Microchip
ATSAMV71Q21B-AAB

ATSAMV71Q21B-AAB - 300MHz Cortex-M7 MCU 2MB Flash | Microchip

The Microchip Technology ATSAMV71Q21B-AAB is a high-performance 32-bit ARM Cortex-M7 microcontroller with a double-precision FPU, running up to 300 MHz, integrating 2 MB of Flash and 384 KB of SRAM in a 144-pin LQFP (20x20 mm) package. It belongs to the SAM V71 automotive-grade family and features an extensive peripheral set including Ethernet, CAN-FD, high-speed USB, HS SDIO/QSPI, I2S, and a 12-bit ADC. A microcontroller (MCU) is a single-chip computer containing a CPU core, program memory, RAM, and on-chip peripherals designed to embedded applications. Within the silicon taxonomy, the ATSAMV71Q21B-AAB sits in the hierarchy: Cortex-M7 core -> ARM 32-bit MCU -> microcontroller -> embedded IC -> semiconductor. The Cortex-M7 architecture is a superscalar pipeline with branch prediction, tightly coupled memory (TCM), and an instruction/data cache that delivers deterministic real-time performance alongside DSP-class signal processing throughput. Key features include a 16-bit external bus interface (EBI) for SDRAM expansion, a graphics LCD controller for TFT panels, hardware cryptographic acceleration (AES, TRNG), and a 12-bit 2 Msps ADC. The device supports 1.8V, 2.5V, and 3.3V I/O operation and is qualified to AEC-Q100 for automotive applications, making it suitable for body electronics, infotainment HMI, and industrial motor control. The Cortex-M7 core integrates DSP extensions (SIMD) and an FPU that handles single- and double-precision IEEE-754 operations. Combined with 16 KB I-cache + 16 KB D-cache and up to 384 KB system SRAM, it sustains the throughput needed for motor-control loops, audio processing, and predictive-maintenance algorithms on factory-floor equipment. Typical applications include automotive body and chassis ECUs, industrial PLC and HMI controllers, motor-control inverters, audio and infotainment head units, and industrial IoT gateways. The integrated Ethernet MAC and HS USB simplify connectivity for industrial and automotive networking stacks. When designing with this device, plan decoupling with bulk 4.7 uF + 100 nF per VDD pin pair and provide a 25 MHz external crystal with proper PCB guard routing. The AEC-Q100 grade adds cost only for the qualification itself - the silicon, footprint, and firmware are identical to industrial equivalents, enabling a single PCB design to serve both end markets. This page synthesizes distributor pricing, drop-in alternatives within the SAM V71 family, and practical hardware-design notes not consolidated in the manufacturer datasheet.

Permintaan RFG Kontak
ATSAMV71Q21B-AABT - 300MHz ARM Cortex-M7 MCU, 2MB Flash | Microchip
ATSAMV71Q21B-AABT

ATSAMV71Q21B-AABT - 300MHz ARM Cortex-M7 MCU, 2MB Flash | Microchip

The Microchip ATSAMV71Q21B-AABT is a high-performance 32-bit ARM Cortex-M7 microcontroller with FPU, operating at up to 300 MHz and featuring 2 MB of Flash memory and 384 KB of SRAM in a 144-pin LQFP package (20x20 mm). It is a member of the SAM V71 family targeting automotive and industrial applications with rich connectivity including CAN-FD, Ethernet, USB, and high-speed serial interfaces. The part suffix "B" denotes the silicon revision, "AAB" specifies the 144-LQFP package and automotive grade, and "T" indicates tape-and-reel packaging. A Cortex-M7 microcontroller is a 32-bit RISC processor core designed for high-performance embedded applications with deterministic real-time behavior. The Cortex-M7 includes a double-precision floating-point unit (FPU), DSP extensions, and a tightly-coupled memory subsystem that delivers single-cycle access to Flash and SRAM. Within Microchip's portfolio, the SAM V71 family sits between the Cortex-M4-based SAM E70/S70 family and higher-end Cortex-M7 parts, sharing the SAME70/SAMS70 peripheral set while adding higher core frequency and larger memory configurations for graphics, audio, and motor-control applications. Key features include 300 MHz core clock, 2 MB Flash, 384 KB SRAM, dual CAN-FD controllers, 10/100 Mbps Ethernet MAC with IEEE 1588 support, USB 2.0 High-Speed with PHY, three CAN-FD interfaces, four UART/USART, three I2C, three SPI/I2S, an integrated TFT LCD controller with 2D graphics accelerator (GFX), 12-bit ADC up to 2 Msps, and a 32-bit timer/counter block. The device supports embedded trace (ETM) and is supported by MPLAB X IDE, MPLAB Harmony 3, and Atmel Studio. Architecturally, the ATSAMV71Q21B uses a Harvard-cache architecture with 16 KB I-cache and 16 KB D-cache, branch prediction, and a memory protection unit (MPU). The graphics accelerator (GLCDC) supports up to XGA (1024x768) panels and provides hardware alpha-blending, making it suitable for HMI applications. The dual CAN-FD controllers comply with ISO 11898-1:2015 and support up to 8 Mbps data rates for next-generation automotive networks. Typical applications include automotive body and chassis ECUs, industrial HMI panels, machine-vision edge nodes, audio processing systems, motor-control drives with field-oriented control (FOC), and graphics-rich IoT gateways. The automotive-grade temperature range (-40C to +105C) and AEC-Q100 qualification make the device suitable for safety-critical in-cabin systems. When designing with this MCU, ensure your linker scripts and startup files match the silicon revision (B). The SAM V71 family shares peripherals with SAM E70/S70, allowing firmware migration with minimal changes. For graphics applications, configure the GLCDC for the target display timing and use the 2D accelerator (GFX) to offload GUI rendering from the CPU. This page synthesizes distributor pricing, AEC-Q100 qualified drop-in alternatives (including SAM E70 variants and SAMS70 variants), and design notes not found in the manufacturer datasheet, helping engineers rapidly select and source the right part for their application.

Permintaan RFG Kontak
ATSAMV71Q21B-CB - 300MHz Cortex-M7 Automotive MCU | Microchip
ATSAMV71Q21B-CB

ATSAMV71Q21B-CB - 300MHz Cortex-M7 Automotive MCU | Microchip

The Microchip ATSAMV71Q21B-CB is an automotive 32-bit ARM Cortex-M7 microcontroller operating up to 300 MHz, with 2 MB of Flash memory and a 144-TFBGA (10 x 10 mm) package. It combines a high-performance RISC processor with a double-precision floating-point unit, automotive-oriented Flash integration, and extensive connectivity for vehicle body, comfort, and powertrain-adjacent electronic control units. The device is identified as an AEC-Q100 automotive component in the manufacturer-related product information. A microcontroller such as the ATSAMV71Q21B-CB is a programmable semiconductor that integrates a processor core, Flash program memory, SRAM, peripherals, clock circuitry, and communication interfaces onto one device. It belongs to the MCU hierarchy within embedded semiconductors and supports real-time control, communications, data acquisition, and safety-oriented monitoring. Unlike a general-purpose microprocessor, the integrated memory and peripheral set allow a compact embedded design to execute control software directly from the device. The principal benefits are a 300 MHz Cortex-M7 processing rate, 2 MB of Flash, and an automotive-grade product profile. The snippet identifies the Flash organization as 2M x 8, while a related distributor listing identifies 384 kB of SRAM. A double-precision FPU accelerates floating-point calculations used in control loops, signal processing, and automotive algorithms. The 144-TFBGA package also supports dense pin availability in a compact 10 x 10 mm footprint. The SAM V71 family is designed around a 32-bit ARM Cortex-M7 RISC core operating at up to 300 MHz. Its Flash-based architecture supports embedded firmware and real-time workloads, while the integrated FPU provides efficient double-precision arithmetic. The automotive qualification indicated by the part information and manufacturer family description supports its use in vehicle electronic systems where environmental robustness and component traceability are important. Typical applications include automotive body-control modules, comfort systems, sensor aggregation, gateway controllers, motor and valve control, dashboard interfaces, and communication gateways. The 300 MHz Cortex-M7 core and 384 kB SRAM provide processing and working-memory capacity for real-time control, while the 2 MB Flash supports larger embedded applications and updateable firmware. Designers should preserve the exact 144-ball TFBGA land pattern, power, ground, and decoupling requirements from the Microchip datasheet. Pin multiplexing, peripheral assignment, clock configuration, and startup behavior must be validated against the device's pin-description and electrical tables. Because the package is dense and automotive systems impose strict EMC and thermal requirements, PCB stack-up, exposed-ball thermal design, and signal-integrity planning are especially important. This page combines manufacturer family information, exact ordering-code details, package identification, source-backed pricing context, replacement analysis, and practical engineering guidance to support faster component selection and hardware planning.

Permintaan RFG Kontak
ATTINY10-TSHR - 12MHz 8-Bit AVR MCU | Microchip Technology
ATTINY10-TSHR

ATTINY10-TSHR - 12MHz 8-Bit AVR MCU | Microchip Technology

The Microchip Technology ATTINY10-TSHR is a low-power 8-bit AVR RISC microcontroller operating up to 12 MHz, with 1 KB of Flash program memory, 32 B of SRAM, four general-purpose I/O lines, and a SOT-23-6 package. The -TSHR ordering suffix identifies the factory-programmable, industrial-temperature configuration. An 8-bit RISC microcontroller is a compact embedded-processing device that executes instructions from on-chip Flash memory and uses SRAM for working data. The AVR architecture belongs to the microcontroller hierarchy, where reduced instruction complexity enables deterministic control, low power consumption, and compact embedded-system designs. The ATTINY10-TSHR is particularly suited to applications requiring a small controller with limited memory and a minimal board footprint. The device combines 1 KB of ISP Flash memory with 32 B of SRAM and four general-purpose I/O lines. Its 16 general-purpose working registers support efficient instruction execution, while a 16-bit timer/counter provides two PWM channels for timing, dimming, or basic waveform-generation tasks. Operation from 1.8 V to 5.5 V allows use across low-voltage and conventional supply systems, with the 12 MHz maximum operating speed specified at 4.5 V to 5.5 V. The ATTINY10-TSHR also includes a four-channel, 8-bit ADC and QTouch capacitive-sensing support. These resources expand the device beyond simple digital I/O control, enabling compact sensing nodes, simple analog measurement systems, and capacitive user interfaces. Its AVR enhanced RISC architecture is designed to approach one MIPS of throughput per megahertz, although actual application performance depends on instruction mix and peripheral activity. Typical uses include battery-powered sensor nodes, capacitive-control panels, compact consumer accessories, industrial controls, lighting modules, and compact power-management products. The SOT-23-6 package supports automated assembly and reduces PCB area, while the small memory footprint favors simple control tasks rather than protocol stacks, graphical interfaces, or data-intensive applications. Designers should verify the complete pin assignment and programming interface against the manufacturer datasheet before layout. The 12 MHz operating limit applies at a 4.5 V to 5.5 V supply, and operation from 1.8 V to 5.5 V does not imply that every peripheral runs at the maximum clock rate across the entire voltage range. This page combines device specifications, practical application guidance, programming references, and carefully qualified same-package alternatives to support component selection and compact embedded-system design.

Permintaan RFG Kontak
ATTINY11-6PC - 8-Bit 6MHz AVR MCU | Microchip Technology
ATTINY11-6PC

ATTINY11-6PC - 8-Bit 6MHz AVR MCU | Microchip Technology

The Microchip Technology ATTINY11-6PC is an 8-bit AVR RISC microcontroller with 1 KB of Flash program memory, a 6 MHz internal clock, and six I/O lines, housed in an 8-pin PDIP package. Its 4 V to 5.5 V operating supply range makes it suitable for conventional 5 V control systems. The device also provides 32 general-purpose working registers, an 8-bit timer/counter, internal and external interrupts, a watchdog timer with an internal oscillator, and selectable power-saving modes. An 8-bit microcontroller is a compact digital controller that executes programmed instructions, reads input signals, controls output devices, and manages timing functions. The ATtiny11 belongs to the AVR RISC architecture and the ATtiny microcontroller family. Within the product hierarchy, this component is a microcontroller, a programmable semiconductor IC, and ultimately a general-purpose embedded-control device. Its small memory footprint and limited I/O count make it most appropriate for compact, cost-sensitive automation rather than complex communications or high-volume data processing. The ATTINY11-6PC combines 1 KB of Flash memory with 32 working registers and a 6 MHz operating speed. Its six I/O lines provide access to external buttons, indicators, logic inputs, and small control loads. A programmable watchdog timer can reset the controller if the main program stops responding, while internal and external interrupts allow event-driven firmware operation. Idle mode stops the CPU, and the device also offers a second software-selectable power-saving mode for reducing consumption between useful activities. The AVR architecture uses a reduced-instruction-set computing core designed for compact embedded systems. The 6 MHz internal oscillator simplifies clock design because an external crystal is not required for the listed operating mode. Program storage is organized as 1 KB of Flash, while the associated program-memory data width is listed as 512 × 16 bits. The 8-pin PDIP format supports conventional through-hole assembly, breadboarding, prototyping, and educational or legacy production boards where a surface-mount package would be inconvenient. Typical uses include simple relay controllers, indicator and pushbutton interfaces, compact sequencing controls, educational timer projects, and low-cost peripheral-control modules. The 4 V to 5.5 V supply range accommodates regulated 5 V systems, while the watchdog timer adds useful supervision for unattended equipment. For designs requiring more program memory, more I/O, or additional communication peripherals, a larger ATtiny-family device may be preferable. PCB designers should confirm the exact 8-pin assignment against the Microchip datasheet before routing signals, especially for programming and reset-related functions. The power and ground pins require careful placement of bypass capacitance, and external signals must remain within the device's 4 V to 5.5 V supply limits. Firmware should also include watchdog-handling logic when the watchdog is enabled. This product page combines the manufacturer's device summary with practical selection guidance, pinout information, design notes, and a constraint-aware comparison of possible replacements. It is intended to help engineers evaluate whether the ATTINY11-6PC's 1 KB memory, 6 MHz clock, six I/O lines, and 8-pin PDIP package match a new or existing design.

Permintaan RFG Kontak
ATTINY11-6PI 8-Bit AVR 6MHz 1KB Microcontroller | Microchip
ATTINY11-6PI

ATTINY11-6PI 8-Bit AVR 6MHz 1KB Microcontroller | Microchip

Microchip ATTINY11-6PI is an 8-bit AVR RISC microcontroller with 1KB of Flash program memory, a 6 MHz operating speed, and an 8-pin PDIP package. The device is identified in distributor listings as an AVR ATtiny microcontroller with 512 x 16 Flash organization, operating from 5 V, and intended for compact embedded-control designs. Its primary engineering value is a small, simple microcontroller platform for applications that require basic digital control, low pin count, and minimal firmware complexity. An 8-bit microcontroller is a programmable semiconductor that executes instructions from embedded Flash memory and controls system inputs and outputs through a small set of I/O pins. The ATTINY11 family belongs to the AVR microcontroller family, within the broader embedded-processing and semiconductor hierarchy. Compared with larger microcontrollers, its 1KB Flash capacity favors simple control loops, fixed-function controllers, compact timers, and basic serial or logic-based interfaces rather than graphics, complex connectivity, or large data processing. The ATTINY11-6PI combines three defining attributes: 8-bit processing, 6 MHz operation, and 1KB of Flash memory. The 512 x 16 organization in the distributor description indicates the internal Flash word arrangement used by the device. Its PDIP package provides an 8-pin through-hole format, making it useful for prototypes, educational systems, and designs assembled with conventional DIP sockets or through-hole assembly methods. The suffix identifies the temperature and packaging configuration used by the selected orderable part. The part is listed as obsolete in the cross-reference information. This lifecycle status makes it important to distinguish archival documentation from current procurement availability. Engineers evaluating a new design should review the current Microchip product and documentation resources, while engineers maintaining existing equipment should verify the exact suffix, pinout, clock requirements, memory map, and supply route before committing a replacement or redesign. Typical uses include small industrial control modules, simple sensor interfaces, compact timer or pulse-generation circuits, LED status and indicator controls, educational microcontroller trainers, and low-complexity embedded products. Because the public listing confirms the processor size, clock speed, memory capacity, voltage, and package, design decisions should remain conservative. Confirm pin multiplexing, electrical limits, reset behavior, clocking, and programming procedures in the manufacturer datasheet before releasing a board. The most important design consideration is lifecycle and availability. This page supports exact-part identification and comparison of documented ATtiny11-family options, but it does not imply that ATTINY11-6PI is suitable for a new production program. For an existing PCB, retain the original suffix unless the replacement has been verified electrically, mechanically, and operationally. For a new design, compare current Microchip microcontrollers by memory, package, clock, tool compatibility, and long-term availability. This product record combines the exact ATTINY11-6PI ordering code with its documented architecture and package identity, verified distributor listings, lifecycle information, pinout guidance, application context, and engineering selection notes. It is intended to accelerate identification and sourcing while keeping design decisions grounded in the manufacturer documentation.

Permintaan RFG Kontak
ATTINY11-6SC 6MHz 1KB AVR MCU 8-SOIC | Microchip
ATTINY11-6SC

ATTINY11-6SC 6MHz 1KB AVR MCU 8-SOIC | Microchip

The Microchip Technology ATTINY11-6SC is an 8-bit AVR ATtiny microcontroller with 1KB of Flash program memory, a maximum operating speed of 6MHz, and an 8-SOIC package. Its 6 I/O lines and 4V to 5.5V supply range make it a compact choice for simple embedded control, sensor reading, switch control, and low-power peripheral logic. An 8-bit AVR microcontroller is a compact embedded processor that combines a CPU core, program memory, data memory, I/O ports, and dedicated peripherals on one integrated circuit. The ATTINY family belongs to the TinyAVR segment of the AVR product line, where small program memory and a low pin count support straightforward control functions rather than complex application processing. The ATTINY11-6SC operates at up to 6MHz and stores 1KB of Flash as 512 words of 16-bit program instructions. Key specifications include 1KB of Flash program memory, 6MHz maximum clock speed, an 8-bit RISC-based AVR core, 6 I/O lines, and a 4V to 5.5V operating supply range. The device is identified as an 8-SOIC package suitable for surface-mount assembly. Its Watchdog Timer provides a hardware mechanism for recovering from unexpected program-flow or system-lock conditions when enabled in the firmware. The device is intended for applications where a small controller can manage discrete inputs and outputs without requiring a large processor, high memory capacity, or a complex external interface. The 1KB Flash capacity is suitable for compact control routines, while the 6MHz operating speed supports straightforward timing and I/O handling. The 6 available I/O lines can be assigned to functions such as digital inputs, outputs, or simple peripheral control depending on the device configuration. Typical uses include small sensor interfaces, relay or switch-control modules, simple timers, LED status indicators, compact consumer accessories, and low-speed embedded control boards. The 8-SOIC package offers a familiar small-outline surface-mount format and is useful where through-hole packaging is not appropriate. Designers should plan their firmware and pin assignments around the limited 1KB program memory and 6 I/O lines. When laying out a board, follow the manufacturer pin-description table for the exact 8-SOIC footprint and verify the supply decoupling requirements for the selected operating voltage. Because the program memory is limited, use compact firmware, remove unused features, and avoid adding peripheral functions that exceed the available flash and I/O budget. This page combines the manufacturer-related product identity, technical specifications, package information, comparison context, and practical design guidance for engineers evaluating the ATTINY11-6SC in compact embedded systems.

Permintaan RFG Kontak
ATTINY11-6SI - 8-Bit 6MHz AVR MCU | Microchip | Embedded
ATTINY11-6SI

ATTINY11-6SI - 8-Bit 6MHz AVR MCU | Microchip | Embedded

Microchip ATTINY11-6SI is an 8-bit AVR RISC microcontroller with 1KB of flash program memory, organized as 512 x 16 bits, a maximum operating speed of 6MHz, and an internal oscillator in an 8-pin SOIC surface-mount package. The device operates at 5V and is designed for compact embedded-control applications requiring minimal program memory and a small footprint. A microcontroller is a programmable semiconductor that integrates a CPU core, memory, and peripheral functions into one device. The ATTINY11-6SI belongs to the AVR microcontroller family and the broader hierarchy of 8-bit embedded processors, embedded controllers, and semiconductors. Its compact body and modest memory footprint make it appropriate for simple control, signal-generation, and state-machine tasks rather than general-purpose computing. The principal features are 1KB flash program memory, 6MHz maximum clock speed, an internal oscillator, and an 8-pin SOIC package. The 512 x 16-bit organization provides sixteen program words per row while retaining a compact 1KB total capacity. A 5V operating supply supports integration with conventional 5V logic systems. The 8-pin surface-mount package reduces board area compared with larger through-hole controllers. Internally, the device uses an AVR RISC architecture with an 8-bit CPU core. This architecture is suited to instruction-efficient embedded control, while the internal oscillator removes the need for an external clock source in straightforward designs. Because program memory is only 1KB, firmware should use compact routines and avoid unnecessary library overhead. Peripheral and memory details must be confirmed in the manufacturer datasheet before assigning a new PCB footprint. Typical uses include simple sequence controllers, timer-based industrial controls, compact sensor interfaces, LED status indicators, and auxiliary control functions embedded in larger equipment. It can also serve as a low-cost controller for a small keypad interface or fixed-function peripheral where the firmware remains below the available 1KB program capacity. It is less suitable for networking, large protocol stacks, or applications requiring substantial data storage. Design the supply decoupling and signal layout around the manufacturer application recommendations, keeping the power path compact and the oscillator-sensitive traces short. Confirm the exact pin assignments in the pin-description table before routing the PCB. If firmware growth is uncertain, choose a controller with more flash and SRAM rather than depending on last-minute code optimization. This page combines the exact device characteristics with pinout, programming, packaging, replacement, and design guidance. It also separates true drop-in alternatives from parts with different clock, memory, or package characteristics so engineers can evaluate replacement decisions without relying on family-name similarity alone.

Permintaan RFG Kontak
ATTINY12-8PU - 8-Bit 1KB Flash AVR MCU, 8MHz | Microchip
ATTINY12-8PU

ATTINY12-8PU - 8-Bit 1KB Flash AVR MCU, 8MHz | Microchip

The Microchip Technology ATTINY12-8PU is an 8-bit AVR RISC microcontroller with 1KB of Flash program memory, 64 bytes of EEPROM, 6 I/O ports, and an 8MHz maximum clock speed, supplied in an 8-pin PDIP package for 4V to 5.5V operation. It is designed for compact embedded control tasks where a small flash footprint, simple 8-pin footprint, and low component count are more important than extensive peripheral integration. An 8-bit AVR microcontroller is a reduced-complexity processor within the broader semiconductor and embedded-controller hierarchy. The ATTINY12 combines an AVR RISC core, Flash program memory, EEPROM data memory, general-purpose I/O, and an internal oscillator in one device. Its PDIP package also provides through-hole compatibility for prototyping, educational assemblies, and repair applications where a surface-mount package would be inconvenient. The ATTINY12-8PU provides 1KB of Flash memory organized as 512 x 16, 64 bytes of EEPROM, and 6 I/O ports. Its listed operating voltage range is 4V to 5.5V, with a maximum operating frequency of 8MHz. The device uses the AVR RISC architecture and is described as offering 90 powerful instructions with most instructions executing in a single clock cycle. Typical use cases include small sensor nodes, simple timers, LED indicators, basic control loops, teaching examples, and dedicated appliance controllers. Because the device has only 1KB of Flash and 64 bytes of EEPROM, it is best suited to compact firmware with limited buffering, calibration storage, and peripheral integration. It should not be selected when the design requires extensive code space, high-resolution ADC conversion, or a large number of I/O pins. The most important design consideration is supply-voltage margin. Operating from a nominal 5V rail requires the rail to remain within the stated 4V to 5.5V range, including transient and regulator tolerance. Designers should also account for the limited memory before adding libraries, and should confirm the exact pin function and startup behavior against the manufacturer datasheet when replacing a different DIP-8 device. This page combines distributor availability, verified device parameters, same-package replacement guidance, and application-specific design notes. It is intended to help engineers identify whether the ATTINY12-8PU is suitable for a new design or whether a higher-memory ATtiny family member should be selected instead.

Permintaan RFG Kontak