ADM232AANZ vs MAX232CPE Perbandingan
Perbandingan bersamaan detil ADM232AANZ dari Analog Devices dan MAX232CPE dari Maxim Integrated. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
Perbandingan Spesifikasi
| Parameter Umum | ADM232AANZ | MAX232CPE |
|---|---|---|
| Merek | Analog Devices | Maxim Integrated |
| Kategori | Interface ICs | Interface ICs |
| Status Lingkungan Hidup | Aktif | Aktif |
| Product Type | Dual RS-232 line driver and receiver transceiver | — |
| Maximum Transmission Rate | 200 kB/s | — |
| Tegangan Pemuat | 5 V | 4.5 V to 5.5 V (single 5 V supply) |
| Number of Drivers | 2 | 2 |
| Number of Receivers | 2 | 2 |
| Charge-Pump Capacitor Value | 0.1 µF | — |
| On-Board DC-DC Converter | Present | — |
| RS-232 Output Swing | Approximately ±9 V with a 5 V supply | — |
| Receiver Input Levels | Up to ±30 V | — |
| Interface Compliance | EIA-232-E and V.28 | — |
| Paket | 16-lead DIP, 0.300 inch (7.62 mm) pitch | 16-pin PDIP (PE) |
| Tipe Mounting | Through-hole | Through-Hole |
| Rentang Suhu Kerja | [DATA_NEEDED: operating temperature range] | — |
| Arus Pemuat | [DATA_NEEDED: supply current] | 8 mA typical |
| Driver Output Voltage | [DATA_NEEDED: driver output voltage] | — |
| Receiver Input Resistance | [DATA_NEEDED: receiver input resistance] | — |
| Status RoHS | [DATA_NEEDED: RoHS status] | See compliance_info |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| Automotive Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | — |
| Standard Packaging Quantity | [DATA_NEEDED: standard packaging quantity] | — |
| Fungsi | — | RS-232 Transceiver (2 Drivers / 2 Receivers) |
| Protocol | — | EIA/TIA-232E, V.28/V.24 |
| Laju Data | — | 120 kbps |
| Driver Output Voltage Swing | — | ±9 V typical (RS-232 load) |
| Receiver Input Voltage Range | — | ±25 V |
| Charge Pump Capacitors | — | 4 x 1 µF external |
| Suhu Kerja | — | 0°C to +70°C (commercial grade) |
| ESD Protection | — | [DATA_NEEDED: ESD rating on driver outputs] |