ADM232LJRZ vs MAX232CSE+T Perbandingan

Perbandingan bersamaan detil ADM232LJRZ dari Analog Devices dan MAX232CSE+T dari Analog Devices. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.

Perbandingan Spesifikasi

Parameter Umum ADM232LJRZ MAX232CSE+T
Merek Analog Devices Analog Devices
Kategori Interface ICs Interface ICs
Status Lingkungan Hidup Aktif Aktif
Transceiver Configuration 2 drivers / 2 receivers —
Tipe Antarmuka Full-duplex RS-232 —
Supply Voltage Range 4.5 V to 5.5 V —
Nominal Supply Voltage 5 V —
Maximum Data Rate 120 kbps —
Transmitter Output Swing ±9 V from a 5 V supply —
Charge-Pump Capacitor Value 1 µF —
Protocol Compliance EIA-232-E and V.28 —
Paket 16-pin SOIC, 7.50 mm width 16-pin Narrow SOIC (SOIC-N-16)
Tipe Mounting Surface mount Surface Mount
Shipping Packaging Tube —
On-Board DC-to-DC Converter Yes —
Logic Compatibility CMOS —
Rentang Suhu Kerja [DATA_NEEDED: operating temperature range] 0 °C to +70 °C (commercial C-grade)
Arus Pemuat [DATA_NEEDED: supply current] —
Receiver Input Resistance [DATA_NEEDED: receiver input resistance] —
Status RoHS [DATA_NEEDED: RoHS status] —
REACH Status [DATA_NEEDED: REACH status] —
Lead-Free Status [DATA_NEEDED: lead-free status] —
Fungsi — RS-232 Line Driver/Receiver (Transceiver)
Number of Drivers — 2
Number of Receivers — 2
Protocol — RS-232 (EIA/TIA-232E, V.28/V.24)
Supply Voltage (Vcc) — 4.5 V to 5.5 V (single +5V supply)
Laju Data — 120 kb/s
RS-232 Driver Output Voltage — ±7.5 V minimum (typical ±9 V) into 3 kΩ load
Receiver Input Voltage Range — ±30 V
Charge Pump — Internal; requires 4 × 1 µF external capacitors
Level MSL — 1 (unlimited floor life at <30 °C / 85 % RH)
Lead-Free / RoHS — Yes (compliant per +T suffix)
Receiver Input Hysteresis — [DATA_NEEDED: receiver hysteresis voltage]
Supply Current (No Load) — [DATA_NEEDED: typical Icc]
Packaging — Tape & Reel (T+R)

Spek dan Sumber

Buka Semua Produk Buat BOM Ajukan Diskon