ADM2561EBRNZ-RL7 vs ADM2561EBRNZ Perbandingan
Perbandingan bersamaan detil ADM2561EBRNZ-RL7 dari Analog Devices dan ADM2561EBRNZ dari Analog Devices. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
Analog Devices
ADM2561EBRNZ-RL7 - 3kV Isolated RS-485/RS-422 Transceiver | ADI
ADM2561EBRNZ-RL7 ✓ Aktif
Perbandingan Spesifikasi
| Parameter Umum | ADM2561EBRNZ-RL7 | ADM2561EBRNZ |
|---|---|---|
| Merek | Analog Devices | Analog Devices |
| Kategori | Interface ICs | Interface ICs |
| Status Lingkungan Hidup | Aktif | Aktif |
| Status Stok | In Stock | — |
| Harga Unit (USD) | $9,07 | — |
| Fungsi | Isolated RS-485/RS-422 transceiver (signal + power isolation) | Isolated RS-485/RS-422 transceiver (full- and half-duplex) with integrated isolated DC-DC converter |
| Protocol | RS-422, RS-485 | RS-422, RS-485 (TIA/EIA-485-A, ISO 8482:1987) |
| Number of Drivers/Receivers | 1/1 (2/2 transceiver) | 2/2 |
| Duplex | Full / Half | Full / Half |
| Data Rate (max) | 25 Mbps | — |
| Isolation Voltage (RMS) | 3 kV RMS | — |
| ESD Protection (bus pins) | ±15 kV IEC 61000-4-2 | — |
| Supply Voltage - Logic Side | 3 V to 5.5 V | — |
| Integrated Isolated DC-DC | Yes (isoPower) | Yes (isoPower) |
| Number of Nodes (bus) | 256 | — |
| Suhu Kerja | -40C to +85C | — |
| Paket | 28-SOIC-W-FP (wide-body SOIC with exposed pad) | 28-pin SOIC-W-FP (wide-body SOIC with exposed pad) |
| Tipe Mounting | Surface Mount | Surface Mount |
| Creepage / Clearance | 8 mm | — |
| Compliance | ANSI/TIA/EIA-485-A-98; ISO 8482:1987(E); UL 1577 | — |
| Laju Data | — | 25 Mbps |
| Isolation Voltage (RMS, 60s) | — | 3 kV |
| ESD Protection (bus pins, IEC 61000-4-2) | — | ±15 kV |
| Unit Load | — | 1/8 unit load (up to 256 nodes on bus) |
| Supply Voltage (logic side) | — | 3.0 V to 5.5 V |
| Hot-Swap Tolerant | — | Yes |
| Rentang Suhu Kerja | — | -40C to +105C |
| Status RoHS | — | Compliant |
| Safety / Regulatory | — | UL 1577 basic insulation; IEC 61000-4-2 ESD; 8 mm creepage/clearance on PCB |