ADM488ARZ vs ISL8488IPZ Perbandingan
Perbandingan bersamaan detil ADM488ARZ dari Analog Devices dan ISL8488IPZ dari Renesas Electronics. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
Analog Devices
ADM488ARZ - 250 kbps Full-Duplex RS-485/422 Transceiver | Analog Devices
ADM488ARZ ✓ AktifPerbandingan Spesifikasi
| Parameter Umum | ADM488ARZ | ISL8488IPZ |
|---|---|---|
| Merek | Analog Devices | Renesas Electronics |
| Kategori | Interface ICs | Interface ICs |
| Status Lingkungan Hidup | Aktif | Unknown |
| Product Type | Full-duplex differential line transceiver | RS-485/RS-422 differential line transceiver |
| Supported Standards | EIA RS-485 and RS-422 | RS-422 and RS-485 |
| Maximum Data Rate | 250 kbps | — |
| Tegangan Pemuat | 5 V ±10% | 5 V |
| Bus Common-Mode Range | −7 V to +12 V | — |
| Input Impedance | 12 kΩ | — |
| Operating Supply Current | 74 µA | — |
| EFT Protection | 2 kV per IEC1000-4-4 | — |
| Electromagnetic Immunity | High immunity per IEC1000-4-3 | — |
| Paket | 8-pin SOIC | 8-PDIP |
| Tipe Mounting | Surface mount | Through-hole |
| Rentang Suhu Kerja | −40°C to +85°C | [DATA_NEEDED: operating temperature range] |
| Driver Count | 1 driver | — |
| Receiver Count | 1 receiver | 1 |
| Operating Mode | Full duplex | — |
| Slew Rate | Reduced slew rate for low electromagnetic interference | [DATA_NEEDED: slew rate] |
| Status RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| Transmitter Count | — | 1 |
| Jumlah Pin | — | 8 pins |
| Power Class | — | Low-power |
| Signal Type | — | Differential balanced |
| Data-Rate Maximum | — | [DATA_NEEDED: maximum data rate] |
| Driver Output Current | — | [DATA_NEEDED: driver output current] |
| Receiver Input Sensitivity | — | [DATA_NEEDED: receiver input sensitivity] |
| Arus Pemuat | — | [DATA_NEEDED: supply current] |
| Shutdown Function | — | [DATA_NEEDED: shutdown function] |