BTS3035TFATMA1 vs BTS3125TFATMA1 Perbandingan
Perbandingan bersamaan detil BTS3035TFATMA1 dari Infineon dan BTS3125TFATMA1 dari Infineon. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
Perbandingan Spesifikasi
| Parameter Umum | BTS3035TFATMA1 | BTS3125TFATMA1 |
|---|---|---|
| Merek | Infineon | Infineon |
| Kategori | Power MOSFET Drivers | Power MOSFET Drivers |
| Status Lingkungan Hidup | Aktif | Aktif |
| Product Type | Low-Side Power Switch | Single-channel N-channel low-side smart power switch |
| Technology | N-Channel MOSFET | — |
| Number of Channels | 1 | — |
| Input Type | CMOS Logic Level | — |
| Continuous Drain Current | 5 A | — |
| On-Resistance (RDS(on)) | 30 mOhm (typical) | — |
| Drain-Source Voltage (VDS) Max | 40 V | — |
| Operating Voltage Range | 12 V nominal (load-dump tolerant to 40 V) | — |
| Fault Protection | Over-current, Short-circuit, Over-temperature, ESD | — |
| Status Feedback | Yes (open-drain diagnostic output) | — |
| Reverse Battery Protection | Integrated | — |
| Rentang Suhu Kerja | -40C to +150C (junction) | -40°C to +150°C |
| Paket | PG-TO252-3-313 (DPAK) | PG-TO252-3-313 (DPAK, SC-63) |
| Tipe Mounting | Surface Mount | Surface Mount |
| Level MSL | [DATA_NEEDED: MSL moisture sensitivity level] | [DATA_NEEDED: MSL moisture sensitivity level] |
| Status RoHS | Compliant | Compliant |
| Automotive Grade | AEC-Q100 qualified | — |
| Load Current (continuous) | — | 2 A |
| Load Current (pulsed) | — | [DATA_NEEDED: pulsed drain current limit] |
| RDS(on) typical | — | 250 mΩ at 5 V Vbb |
| Supply Voltage (Vbb, nominal) | — | 5 V |
| Supply Voltage (Vbb, operating) | — | 5 V to 28 V |
| Load Dump Transient Protection | — | 40 V |
| Input Logic Compatibility | — | 3.3 V / 5 V CMOS |
| On-State Resistance (max) | — | [DATA_NEEDED: maximum RDS(on) over temp] |
| Tahanan Panas, Hubung-lingkungan | — | [DATA_NEEDED: theta_JA value] |
| Over-temperature Shutdown | — | ~150°C with auto-restart |
| Short-Circuit Protection | — | Yes, current-limited |
| Over-voltage Protection | — | Yes (clamping at 40 V) |
| ESD Protection | — | Yes (per IEC 61000-4-2, [DATA_NEEDED: contact/air kV rating]) |
| Status Flag Output | — | Yes (fault feedback) |