BTS3050TFATMA1 vs BTS3125TFATMA1 Perbandingan
Perbandingan bersamaan detil BTS3050TFATMA1 dari Infineon dan BTS3125TFATMA1 dari Infineon. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
Perbandingan Spesifikasi
| Parameter Umum | BTS3050TFATMA1 | BTS3125TFATMA1 |
|---|---|---|
| Merek | Infineon | Infineon |
| Kategori | Power MOSFET Drivers | Power MOSFET Drivers |
| Status Lingkungan Hidup | Aktif | Aktif |
| Part Number | BTS3050TFATMA1 | — |
| Manufacturer | Infineon Technologies | — |
| Product Family | HITFET Smart Low-Side Switch | — |
| Switch Type | N-Channel Low-Side Smart Power Switch | — |
| Jumlah Output | 1 | — |
| RDS(on) (typ) | 44 mOhm at 25 C | — |
| Continuous Drain Current | 4 A | — |
| Load Voltage (max) | 5.5 V | — |
| Logic Input | CMOS compatible, logic-level | — |
| Status Output | Yes (fault feedback) | — |
| Protection Features | Over-current, Over-temperature, Over-voltage, ESD | — |
| Suhu Kerja | -40 C to +150 C (junction) | — |
| Paket | PG-TO252-3-313 (TO-252 / DPAK) | PG-TO252-3-313 (DPAK, SC-63) |
| Tipe Mounting | Surface Mount | Surface Mount |
| AEC-Q100 | Qualified | — |
| RoHS | Compliant | — |
| Product Type | — | Single-channel N-channel low-side smart power switch |
| Load Current (continuous) | — | 2 A |
| Load Current (pulsed) | — | [DATA_NEEDED: pulsed drain current limit] |
| RDS(on) typical | — | 250 mΩ at 5 V Vbb |
| Supply Voltage (Vbb, nominal) | — | 5 V |
| Supply Voltage (Vbb, operating) | — | 5 V to 28 V |
| Load Dump Transient Protection | — | 40 V |
| Input Logic Compatibility | — | 3.3 V / 5 V CMOS |
| On-State Resistance (max) | — | [DATA_NEEDED: maximum RDS(on) over temp] |
| Tahanan Panas, Hubung-lingkungan | — | [DATA_NEEDED: theta_JA value] |
| Rentang Suhu Kerja | — | -40°C to +150°C |
| Over-temperature Shutdown | — | ~150°C with auto-restart |
| Short-Circuit Protection | — | Yes, current-limited |
| Over-voltage Protection | — | Yes (clamping at 40 V) |
| ESD Protection | — | Yes (per IEC 61000-4-2, [DATA_NEEDED: contact/air kV rating]) |
| Status Flag Output | — | Yes (fault feedback) |
| Level MSL | — | [DATA_NEEDED: MSL moisture sensitivity level] |
| Status RoHS | — | Compliant |