BTS3060TFATMA1 vs BTS3028SDRATMA1 Perbandingan
Perbandingan bersamaan detil BTS3060TFATMA1 dari Infineon dan BTS3028SDRATMA1 dari Infineon. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
Perbandingan Spesifikasi
| Parameter Umum | BTS3060TFATMA1 | BTS3028SDRATMA1 |
|---|---|---|
| Merek | Infineon | Infineon |
| Kategori | Power MOSFET Drivers | Power MOSFET Drivers |
| Status Lingkungan Hidup | Aktif | Aktif |
| Product Type | Smart Low-Side Power Switch | Smart Low-Side Power Switch |
| Manufacturer Family | HITFET | — |
| Number of Channels | 1 | — |
| On-Resistance (RDS(on) typ) | 50 mΩ at 25°C | — |
| Maximum Continuous Load Current | 3 A | — |
| Maximum Load Supply Voltage | 42 V | — |
| Tipe Transistor | N-Channel Vertical Power MOSFET (monolithically integrated) | — |
| Switch Configuration | Low-Side, 1:1 | — |
| Input Type | Logic-level gate input (3.3V / 5V compatible) | — |
| Diagnostic Output | Status pin (open-drain, requires pull-up) | — |
| Embedded Protection | Overcurrent, Overtemperature, Overvoltage, Open-load detection | — |
| Paket | PG-TO252-3 (DPAK), 3 pins (2+Tab) | PG-TO252-3-11 (DPAK, 3 pins = 2 leads + tab) |
| Tipe Mounting | Surface Mount | Surface Mount |
| Rentang Suhu Kerja | -40°C to +150°C (junction) | — |
| Automotive Qualification | AEC-Q100 qualified | AEC-Q100 |
| Packaging | Tape & Reel (TF suffix) | — |
| Status RoHS | Compliant | Compliant |
| Topologi | — | 1:1 N-Channel, single channel |
| Arus Output (Max) | — | 5 A |
| On-Resistance RDS(ON) | — | 28 mΩ (typ.) |
| Load Voltage (max) | — | 60 V (load-dump rated) |
| Tegangan Pemuat Kerja | — | 5 V to 28 V (typ. 13.5 V) |
| Logic Input Voltage (IN) | — | Logic-level, 3.3 V/5 V compatible |
| Suhu Kerja | — | -40 °C to +150 °C (junction) |
| Protection Features | — | Overtemperature shutdown, overvoltage clamp, ESD, short-circuit current limit, reverse battery, ground loss |
| Status Output | — | Open-drain diagnostic flag |
| Level MSL | — | [DATA_NEEDED: MSL rating] |