BTS3104SDRATMA1 vs ITS716GFUMA1 Perbandingan
Perbandingan bersamaan detil BTS3104SDRATMA1 dari Infineon dan ITS716GFUMA1 dari Infineon. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
Perbandingan Spesifikasi
| Parameter Umum | BTS3104SDRATMA1 | ITS716GFUMA1 |
|---|---|---|
| Merek | Infineon | Infineon |
| Kategori | Power MOSFET Drivers | Power MOSFET Drivers |
| Status Lingkungan Hidup | Aktif | Aktif |
| Product Type | Low-side power switch (HITFET family) | Smart High-Side Power Switch |
| Number of Channels | 1 | 4 |
| Konfigurasi Output | Low-side, N-channel | High-side (N-Channel MOSFET) |
| Drain-to-Source Voltage (V_DS) Max | 60 V | — |
| Continuous Drain Current (I_D) | 2 A | — |
| On-State Resistance (R_DS(on)) Typ | [DATA_NEEDED: R_DS(on) value] | — |
| Input Logic Level | CMOS-compatible (active-high) | — |
| Supply Voltage (V_IN) | [DATA_NEEDED: V_IN range] | — |
| Standby Current | [DATA_NEEDED: standby current] | [DATA_NEEDED: Iq standby typical] |
| Rentang Suhu Kerja | -40 C to +150 C | -40 C to +85 C (industrial grade) |
| Paket | PG-TO252-3-11 (DPAK) | PG-DSO-20-32 (20-pin SOIC, exposed pad) |
| Tipe Mounting | Surface Mount | Surface Mount |
| Protection Features | Overtemperature, overcurrent, short-circuit, overvoltage, ESD | Overload, short-circuit, over-temperature, over-voltage, ESD |
| Automotive Qualification | AEC-Q100 qualified | — |
| Status RoHS | Compliant | Compliant |
| Bebas Halogen | Yes | — |
| Level MSL | 1 | [DATA_NEEDED: MSL rating] |
| Continuous Current per Channel | — | 2.3 A |
| On-State Resistance (RON) per Channel | — | [DATA_NEEDED: Ron typical value] |
| Operating Voltage Range (Vbb) | — | 5 V to 36 V |
| Load Dump Tolerance | — | Up to 45 V |
| Input Logic Levels | — | CMOS/TTL compatible, parallel interface |
| Diagnostic Output | — | Open-drain fault flag, one per channel |
| PWM Capability | — | Up to 1 kHz |
| Tahanan Panas, Hubung-lingkungan | — | [DATA_NEEDED: theta_JA value] |