BTS6143DAUMA1 vs BTS3011TEATMA1 Perbandingan
Perbandingan bersamaan detil BTS6143DAUMA1 dari Infineon dan BTS3011TEATMA1 dari Infineon. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
Infineon
BTS6143DAUMA1 - 8A Smart High-Side Switch | Infineon | Automotive PROFET
BTS6143DAUMA1 ✓ AktifPerbandingan Spesifikasi
| Parameter Umum | BTS6143DAUMA1 | BTS3011TEATMA1 |
|---|---|---|
| Merek | Infineon | Infineon |
| Kategori | Power MOSFET Drivers | Power MOSFET Drivers |
| Status Lingkungan Hidup | Aktif | Aktif |
| Product Type | Smart High-Side Power Switch (PROFET) | Smart Low-Side Power Switch |
| Number of Channels | 1 | 1 |
| Topologi | High-Side | — |
| Konfigurasi Output | N-Channel vertical MOSFET | — |
| Nominal Load Voltage (Vbb) | 12 V (automotive) | — |
| Operating Voltage Range (Vbb) | [DATA_NEEDED: operating voltage range] | — |
| Continuous Output Current (IL) | 8 A (typical) | — |
| On-State Resistance (R_DS(on)) | [DATA_NEEDED: typical R_DS(on) in mOhm] | — |
| Short-Circuit Protection | Yes (with latch) | — |
| Current Limitation | Yes | — |
| Overload Protection | Yes | — |
| Penutupan Panas | Yes (with auto-restart) | — |
| Overvoltage Protection | Yes (including load dump) | — |
| Loss-of-Ground Protection | Yes | — |
| Loss-of-Vbb Protection | Yes | — |
| Diagnostic Output | Yes (status/fault feedback) | Open-drain status feedback pin |
| Operating Temperature Range (Tj) | -40 C to +150 C | — |
| Paket | PG-TO252-5-11 (DPAK-5, 4 leads + tab) | PG-TO252-5 (DPAK-5) |
| Tipe Mounting | Surface Mount | Surface Mount |
| Automotive Grade | Yes (AEC-Q100 qualified PROFET family) | — |
| On-Resistance R_DS(on) (typ.) | — | 11 mΩ |
| Continuous Load Current | — | 10 A |
| Operating Voltage Range | — | 3 V to 28 V |
| Switch Technology | — | N-channel vertical power MOSFET |
| Input Type | — | Logic-level CMOS compatible |
| Jumlah Pin | — | 5 (4 + Tab) |
| Suhu Hubung Kerja | — | -40 °C to +150 °C |
| ESD Protection (HBM) | — | ±8 kV (output pin) |
| AEC-Q100 Qualification | — | Grade 1 qualified |
| Integrated Protections | — | Current limit, overtemperature shutdown, overvoltage clamp, ESD, ground-loss protection |
| Status RoHS | — | Compliant |