CAT9532HV6I vs CAT9532HV6I-GT2 Perbandingan
Perbandingan bersamaan detil CAT9532HV6I dari onsemi dan CAT9532HV6I-GT2 dari onsemi. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
Perbandingan Spesifikasi
| Parameter Umum | CAT9532HV6I | CAT9532HV6I-GT2 |
|---|---|---|
| Merek | onsemi | onsemi |
| Kategori | LED Drivers | LED Drivers |
| Status Lingkungan Hidup | Aktif | Aktif |
| Device Type | 16-bit I/O Port Expander with LED Dimming | I/O Port Expander with LED Dimming |
| Jumlah Output | 16 | 16 |
| Antarmuka | I2C / SMBus | I2C / SMBus |
| LED Current per Channel | 25 mA | — |
| Dimming Steps | 256 brightness levels | — |
| Blink Rates | 2 programmable | — |
| Tegangan Pemuat | 2.3 V to 5.5 V [DATA_NEEDED: precise range from datasheet electrical table] | — |
| Suhu Kerja | -40 C to +85 C | -40 C to +85 C |
| Technology | CMOS | CMOS |
| Paket | 24-TQFN (HVQCCN) 4x4 mm | 24-TQFN-EP (4 x 4 mm) |
| Tipe Mounting | Surface Mount | Surface Mount |
| Level MSL | 1 | [DATA_NEEDED: MSL rating] |
| Bebas Halogen | Yes | — |
| BFR Free | Yes | — |
| Status RoHS | Compliant | — |
| Hardware Address Pins | 2 (up to 4 devices on bus) | — |
| Output Sink Current per Channel | — | 25 mA |
| Supply Voltage (VCC) | — | 2.3 V to 5.5 V |
| Maximum I2C Clock Frequency | — | 400 kHz |
| I2C Addresses per Bus | — | 8 (A0/A1/A2 hardware pins) |
| Internal PWM Generators | — | 2 (PWM0, PWM1) |
| Programmable Blink Frequency Range | — | 0.25 Hz to 7.81 Hz |
| Programmable Duty Cycle Range | — | 0 % to 99.6 % |
| RoHS / Halogen-Free Status | — | RoHS compliant, halogen-free, BFR-free |
| Interrupt Output | — | Active-low, open-drain |
| Input Voltage Tolerance | — | 5.5 V tolerant I/Os (over VCC range) |