CD4051BE vs CD4051BCN Perbandingan
Perbandingan bersamaan detil CD4051BE dari Texas Instruments dan CD4051BCN dari onsemi. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
Texas Instruments
CD4051BE - 8:1 Analog Multiplexer, 240 Ohm, 16-PDIP | Texas Instruments
CD4051BE ✓ AktifPerbandingan Spesifikasi
| Parameter Umum | CD4051BE | CD4051BCN |
|---|---|---|
| Merek | Texas Instruments | onsemi |
| Kategori | Interface ICs | Interface ICs |
| Status Lingkungan Hidup | Aktif | Aktif |
| Fungsi | 8:1 Analog Multiplexer / Demultiplexer | — |
| Configuration | 1 Circuit, 8:1 (Single Pole 8 Throw) | — |
| On-State Resistance (Ron) | 240 Ohm max | — |
| On-State Resistance (Ron) Typ | 125 Ohm at VDD-VEE = 15V | — |
| Channel-to-Channel RON Match (ΔRon) | 5 Ohm typ at VDD-VEE = 15V | — |
| Off-State Leakage | ±100 pA typ at VDD-VEE = 18V | Very low |
| Signal Input Range | 15 Vp-p min at VDD-VEE = 18V | — |
| Supply Voltage Range (Single) | 3 V to 20 V | — |
| Supply Voltage Range (Dual) | ±2.5 V to ±10 V | — |
| Suhu Kerja | -55C to +125C | — |
| Paket | 16-Pin PDIP (N) | 16-lead plastic dual-in-line package |
| Jumlah Pin | 16 | — |
| Tipe Mounting | Through-Hole | Through-hole |
| Select Inputs | 3 (A, B, C) binary with INH inhibit | — |
| Switching Action | Break-before-make | — |
| Technology | CMOS | CMOS |
| Quiescent Power Dissipation | Very low (under all digital control states) | — |
| Status RoHS | Compliant | [DATA_NEEDED: RoHS status] |
| Level MSL | 1 (unlimited) | — |
| Multiplexer Configuration | — | 8:1 |
| On-State Resistance | — | 240 ohm |
| Number of Channels | — | 8 channels |
| Common Terminal Count | — | 1 terminal |
| Select Input Count | — | 3 binary inputs |
| Inhibit Control | — | 1 active input |
| Package Outline | — | JEDEC MS-001 |
| Package Width | — | 0.300 inch |
| Supply Architecture | — | Dual V± supply |
| On-State Impedance | — | Low |
| Rentang Suhu Kerja | — | [DATA_NEEDED: operating temperature range] |
| Maximum Analog Signal Voltage | — | [DATA_NEEDED: maximum analog signal voltage] |
| Logic Input Voltage Range | — | [DATA_NEEDED: logic input voltage range] |
| Supply Voltage Range | — | [DATA_NEEDED: supply voltage range] |
| REACH Status | — | [DATA_NEEDED: REACH status] |