CD4060BCN vs CD4060BE Perbandingan
Perbandingan bersamaan detil CD4060BCN dari onsemi dan CD4060BE dari Texas Instruments. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
Perbandingan Spesifikasi
| Parameter Umum | CD4060BCN | CD4060BE |
|---|---|---|
| Merek | onsemi | Texas Instruments |
| Kategori | Logic ICs | Logic ICs |
| Status Lingkungan Hidup | Aktif | Aktif |
| Counter Type | 14-stage ripple-carry binary counter | — |
| Supply Voltage Range | 3.0 V to 15 V | 3 V to 18 V |
| Clock Edge | Negative-edge triggered | — |
| Reset Type | Asynchronous, active-high | — |
| Noise Immunity | 0.45 VDD typical | — |
| Counter Output Count | 14 stages | — |
| Oscillator | On-chip RC or crystal oscillator | — |
| Logic Family | CD4000 CMOS series | CMOS |
| Paket | 16-lead PDIP | — |
| Package Width | 0.300 in | — |
| Package Standard | JEDEC MS-001 | — |
| Tipe Mounting | Through-hole | Through-hole |
| Rentang Suhu Kerja | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Frekuensi Bawah Maximum | [DATA_NEEDED: maximum clock frequency] | 24 MHz |
| Arus Memerintah | [DATA_NEEDED: quiescent current] | [DATA_NEEDED: quiescent current] |
| Output Drive Current | [DATA_NEEDED: output drive current] | [DATA_NEEDED: output drive current] |
| Lead-Free Status | [DATA_NEEDED: lead-free status] | [DATA_NEEDED: lead-free status] |
| Status RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| Product Type | — | 14-stage ripple-carry binary counter, divider, and oscillator |
| Number of Counter Stages | — | 14 stages |
| Number of Binary Outputs | — | 14 outputs |
| Clock Edge Sensitivity | — | Negative edge |
| Oscillator Timing Modes | — | RC or crystal oscillator |
| Master Reset Function | — | Resets counter outputs to all 0 |
| Counter Technology | — | Ripple-carry binary counter |
| Package Type | — | 16-pin plastic DIP |
| Package Pin Count | — | 16 pins |
| Input Leakage Current | — | [DATA_NEEDED: input leakage current] |
| REACH Status | — | [DATA_NEEDED: REACH status] |