CP2109-A01-GMR vs CP2109-A01-GM Perbandingan
Perbandingan bersamaan detil CP2109-A01-GMR dari Silicon Labs dan CP2109-A01-GM dari Silicon Labs. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
Perbandingan Spesifikasi
| Parameter Umum | CP2109-A01-GMR | CP2109-A01-GM |
|---|---|---|
| Merek | Silicon Labs | Silicon Labs |
| Kategori | Interface ICs | Interface ICs |
| Status Lingkungan Hidup | Aktif | Unknown |
| Manufacturer | Silicon Labs | — |
| Fungsi | USB Bridge, USB to UART | — |
| Protocol | USB | — |
| Antarmuka | UART | — |
| Standards | USB 2.0 | — |
| Tegangan Pemuat | 3.0 V to 3.6 V | — |
| Operating Supply Current | 17 mA (typical, per Cross-Reference data) | — |
| FIFO Buffer | 640 Byte | — |
| USB Speed | Full-Speed 12 Mbps | — |
| Number of UART Channels | 1 | — |
| Data Bits | 5, 6, 7, 8 | — |
| Baud Rate Range | 300 bps to 1 Mbaud | — |
| Paket | 28-QFN (5x5 mm) with Exposed Pad | 28-QFN, 5 mm by 5 mm |
| Tipe Mounting | Surface Mount | Surface mount |
| Suhu Kerja | -40 C to +85 C | — |
| Status RoHS | Compliant | EU RoHS compliant |
| Device Type | — | Single-chip USB-to-UART bridge |
| USB Standard | — | USB 2.0 |
| Supported USB Speed | — | Low-speed and full-speed |
| UART Interface | — | 1 channel |
| Supply Voltage Range | — | 3.3 V to 3.6 V |
| Integrated USB Transceiver | — | Yes |
| External USB-Termination Resistors | — | Not required |
| Integrated Clock | — | Yes |
| External Crystal | — | Not required |
| On-Chip Power-On Reset | — | Yes |
| Programmable Memory | — | Internal 1024-byte programmable ROM |
| Configurable Descriptor Data | — | Vendor ID, product ID, serial number, power descriptor, release number, and product description strings |
| CP2109 Memory Type | — | One-time-programmable memory |
| Rentang Suhu Kerja | — | [DATA_NEEDED: operating temperature range] |
| Maximum UART Baud Rate | — | [DATA_NEEDED: maximum UART baud rate] |
| Pin Configuration | — | [DATA_NEEDED: complete manufacturer pin configuration] |