DRV8301DCAR vs DRV8303DCAR Perbandingan
Perbandingan bersamaan detil DRV8301DCAR dari Texas Instruments dan DRV8303DCAR dari Texas Instruments. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
Texas Instruments
DRV8301DCAR - 65V 3-Phase Gate Driver with Buck Regulator & SPI | Texas Instruments
DRV8301DCAR ✓ AktifPerbandingan Spesifikasi
| Parameter Umum | DRV8301DCAR | DRV8303DCAR |
|---|---|---|
| Merek | Texas Instruments | Texas Instruments |
| Kategori | Motor Drivers | Motor Drivers |
| Status Lingkungan Hidup | Aktif | Aktif |
| Topologi | 3-phase gate driver (pre-driver) for 6 N-channel MOSFETs | Three half-bridge pre-drivers for external N-channel MOSFETs |
| Motor Supply Voltage (VM) | 8 V to 60 V (absolute max 65 V) | — |
| Gate Drive Current (per phase) | 5 mA to 60 mA (programmable via SPI) | — |
| Charge Pump Supply | 10 V to 12 V (for 100% HS duty cycle) | — |
| Integrated Current Shunt Amplifiers | Dual, 4.6 V/V to 80 V/V gain, 5 µs settling | — |
| Integrated Buck Regulator | 1.5 A synchronous, 0.8 V to 8.5 V adjustable, 3.3 V / 5 V preset | — |
| Control Interface | 6-PWM (3-PWM mode selectable) + SPI | — |
| Dead-Time | Programmable via SPI (adaptive) | — |
| Protections | OCP, OTP, UVLO, gate-drive fault, shoot-through prevention | — |
| Rentang Suhu Kerja | -40 °C to +125 °C | -40 °C to +125 °C |
| Paket | 56-pin HTSSOP (DCA) with PowerPAD, 14.0 mm × 6.1 mm | HTSSOP-48 (DCA) with PowerPAD, 12.5 mm × 6.1 mm |
| Tipe Mounting | Surface Mount | Surface Mount |
| Level MSL | 3 (168 hours) | 3 (per TI product page) |
| Status RoHS | Compliant | Compliant |
| SPI Max Clock Frequency | 5 MHz | — |
| Product Type | — | Three-phase gate driver (pre-driver) with dual current-shunt amplifiers |
| Peak Source Gate Current | — | 1.7 A |
| Peak Sink Gate Current | — | 2.3 A |
| Maximum Supply Voltage (VBS/VGLS abs max) | — | 65 V |
| Operating Supply Voltage (VM) | — | 6 V to 60 V |
| Logic Supply Voltage (VDD) | — | 3.3 V or 5 V (1.8 V compatible inputs) |
| Number of Half-Bridge Channels | — | 3 |
| Integrated Current-Shunt Amplifiers | — | 2 (bidirectional, programmable gain) |
| Current-Shunt Amplifier Gain Settings | — | 5 / 10 / 20 / 40 V/VIA (SPI configurable) |
| Antarmuka | — | SPI (configuration) + 6 PWM inputs (EN, IN, GH) |
| Bootstrap Architecture | — | Integrated bootstrap diode with trickle-charge pump, supports 100% duty cycle |
| Dead-Time Control | — | Programmable via SPI |
| Protection Features | — | UVLO (gate-drive and bootstrap), OC (programmable), OT warning, OT shutdown, phase fault from SPIs |
| Lead-Free | — | Yes |