DS90C402M vs MAX485ESA+ Perbandingan
Perbandingan bersamaan detil DS90C402M dari Texas Instruments dan MAX485ESA+ dari Analog Devices. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
Perbandingan Spesifikasi
| Parameter Umum | DS90C402M | MAX485ESA+ |
|---|---|---|
| Merek | Texas Instruments | Analog Devices |
| Kategori | Interface ICs | Interface ICs |
| Status Lingkungan Hidup | Aktif | Aktif |
| Device Type | Dual LVDS receiver | — |
| Receiver Configuration | 2 receivers | — |
| Input Threshold Sensitivity | ±100 mV | — |
| Common-Mode Noise Protection | Supported | — |
| Data-Rate Optimization | High data rate | — |
| Power Optimization | Low power | — |
| Interface Pairing | DS90C401 companion device | — |
| Topologi | Dual high-speed point-to-point interface | — |
| Paket | 8-lead SOIC | 8-SOIC (SOIC-8) |
| Package Family | SOIC surface-mount package family | — |
| Jumlah Pin | 8 | — |
| Tegangan Pemuat Kerja | [DATA_NEEDED: operating supply voltage] | — |
| Propagation Delay | [DATA_NEEDED: propagation delay] | — |
| Input Common-Mode Range | [DATA_NEEDED: input common-mode voltage range] | — |
| Maximum Data Rate | [DATA_NEEDED: maximum data rate] | — |
| Arus Pemuat | [DATA_NEEDED: supply current] | — |
| Rentang Suhu Kerja | [DATA_NEEDED: operating temperature range] | — |
| Differential Input Termination | [DATA_NEEDED: input termination requirement] | — |
| Status RoHS | [DATA_NEEDED: RoHS status] | Compliant (per Maxim/ADI datasheet suffix '+') |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| MSL | [DATA_NEEDED: moisture sensitivity level] | — |
| Tipe Mounting | Surface mount | Surface Mount |
| Fungsi | — | Transceiver |
| Protocol | — | RS-422, RS-485 |
| Number of Drivers/Receivers | — | 1/1 |
| Duplex | — | Half |
| Tegangan Pemuat | — | 4.75 V to 5.25 V (5 V nominal) |
| Laju Data | — | 2.5 Mbps |
| Supply Current (unloaded) | — | 120 µA to 500 µA |
| Receiver Hysteresis | — | 70 mV (typ) |
| Common-Mode Input Range | — | -7 V to +12 V |
| Differential Input Threshold (V_TH) | — | -0.2 V min / +0.2 V max |
| ESD Protection (HBM, driver output) | — | ±15 kV (per datasheet) |
| Unit Load | — | 1/8 (up to 256 transceivers on bus) |
| Suhu Kerja | — | -40 °C to +85 °C |