EPC1LLC20 vs EPC1LI20 Perbandingan

Perbandingan bersamaan detil EPC1LLC20 dari Intel dan EPC1LI20 dari Altera. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.

Perbandingan Spesifikasi

Parameter Umum EPC1LLC20 EPC1LI20
Merek Intel Altera
Kategori Memory ICs Memory ICs
Status Lingkungan Hidup Obsolete Obsolete
Tipe Memori Serial Configuration Flash OTP Configuration PROM (EPROM-based)
Ukuran Memori 1 Mbit (1,048,576 bits) 1 Mb (1,048,576 bits)
Antarmuka Altera Serial Configuration (4-wire) —
Serial Clock Frequency 8 MHz maximum —
Supply Voltage (VCC) 2.7 V to 3.6 V (3.3 V typical) 5.0 V (4.75 V to 5.25 V)
Paket 20-pin PLCC (LLC) 20-pin PLCC (J-lead, 9x9 mm)
Programming Cycles Endurance 100,000 cycles minimum —
Data Retention 20 years minimum —
Suhu Kerja [DATA_NEEDED: operating temperature range] [DATA_NEEDED: operating temperature range]
Programming Mode In-system via serial interface —
Configuration Compatibility Altera FLEX, ACEX, APEX, Cyclone, Mercury —
Tipe Mounting Surface Mount (PLCC socket or solder) Surface Mount (PLCC socket compatible)
Lead-Free / RoHS [DATA_NEEDED: RoHS compliance status] —
Level MSL [DATA_NEEDED: MSL moisture sensitivity level] 1 (per Partstack datasheet record)
Standby Current [DATA_NEEDED: standby current] —
Configuration Interface — Altera Passive Serial / Altera Active Serial / JTAG (IEEE 1149.1)
Maximum Configuration Clock — 8 MHz
Programming Voltage (VPP) — 12.75 V (typical, factory-programmed via JTAG)
Jumlah Pin — 20
Cascading Support — Yes (nCASC pin for multi-device daisy chain)
Endurance — OTP (one-time programmable, 1000 erase-equivalent UV cycles for pre-program erase)
JTAG Programming — Yes (in-system via IEEE 1149.1)
Compatible FPGA Families — FLEX 8000, FLEX 10K, ACEX 1K, APEX 20K, Mercury
Status RoHS — [DATA_NEEDED: RoHS status - original Altera part may be non-RoHS SnPb finish]

Spek dan Sumber

Buka Semua Produk Buat BOM Ajukan Diskon