FSA3031UMX vs ISL84467IRTZ Perbandingan
Perbandingan bersamaan detil FSA3031UMX dari onsemi dan ISL84467IRTZ dari Renesas Electronics. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
Renesas Electronics
ISL84467IRTZ - Quad SPDT Analog Switch, 0.39Ω rON, 1.65-4.5V | Renesas
ISL84467IRTZ ✓ AktifPerbandingan Spesifikasi
| Parameter Umum | FSA3031UMX | ISL84467IRTZ |
|---|---|---|
| Merek | onsemi | Renesas Electronics |
| Kategori | Interface ICs | Interface ICs |
| Status Lingkungan Hidup | Aktif | Aktif |
| Fungsi | DP3T USB2.0 + MHL switch (bi-directional, 2 x DP3T) | Quad SPDT (Dual DPDT) analog switch |
| Switch Configuration | Double-Pole, Triple-Throw (DP3T), 3:1 | — |
| Number of Channels | 2 (dual) | 4 (SPDT) |
| On-Resistance (Ron, typ.) | 5 ohm (per channel) | — |
| -3 dB Bandwidth | >700 MHz | — |
| Crosstalk | -50 dB at 240 MHz | — |
| Data Rate Support | USB 2.0 HS (480 Mbps) and MHL (up to 2.25 Gbps TMDS) | — |
| Operating Supply Voltage (VCC) | 1.65 V to 4.5 V | — |
| Control Interface | GPIO (logic-level SEL pin, no I2C) | — |
| ESD Protection | Integrated on connector-side pins (per datasheet) | Yes (logic and signal pins) |
| Paket | 12-UMLP (1.8 x 1.8 mm) | TQFN-16 (3x3 mm) with exposed pad |
| Tipe Mounting | Surface Mount | Surface Mount |
| Rentang Suhu Kerja | -40C to +85C | [DATA_NEEDED: operating temperature range] |
| Status RoHS | Compliant | Compliant |
| Lead-Free | Yes | — |
| Level MSL | 1 | — |
| Configuration | — | 2:1 switch (SPDT) x 4 |
| On Resistance (rON) | — | 0.75 Ω max (per FindIC summary) |
| Supply Voltage (V+) | — | 1.65 V to 4.5 V |
| Logic Input Compatibility | — | 1.8 V logic-compatible (single supply) |
| Turn-On Time (tON) | — | 33 ns |
| Turn-Off Time (tOFF) | — | 16 ns |
| Signal Path | — | Bidirectional |
| Switching Action | — | Break-before-make |
| Channel-to-Channel Crosstalk | — | [DATA_NEEDED: crosstalk at specified frequency] |
| Off Isolation | — | [DATA_NEEDED: off isolation at specified frequency] |