INA103KPG4 vs INA103KP Perbandingan
Perbandingan bersamaan detil INA103KPG4 dari Texas Instruments dan INA103KP dari Texas Instruments. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
Perbandingan Spesifikasi
| Parameter Umum | INA103KPG4 | INA103KP |
|---|---|---|
| Merek | Texas Instruments | Texas Instruments |
| Kategori | Amplifier ICs | Amplifier ICs |
| Status Lingkungan Hidup | Aktif | Aktif |
| Product Type | Low-noise, low-distortion instrumentation amplifier | Low-noise, low-distortion instrumentation amplifier |
| Number of Circuits | 1 circuit | — |
| Paket | 16-pin PDIP | 16-pin PDIP |
| Input Noise Density | 1 nV/√Hz | 1 nV/√Hz |
| Total Harmonic Distortion plus Noise | 100 | [DATA_NEEDED: THD+N value and test conditions] |
| Gain-Bandwidth Product | 1000 MHz | 6 MHz |
| Supply Voltage Range | ±25 V | ±25 V |
| Common-Mode Rejection Ratio | >100 dB | >100 dB |
| Internal Gain-Setting Resistors | 100 kΩ | — |
| Maximum Output Voltage | ±10 V | — |
| Arus Output Maximum | 2.5 mA | — |
| Gain Accuracy | 0.02% | — |
| Signal Input Type | Differential | — |
| Tipe Mounting | Through-hole | Through-hole |
| Status RoHS | [DATA_NEEDED: RoHS status] | — |
| Rentang Suhu Kerja | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Output Offset Voltage | [DATA_NEEDED: output offset voltage] | — |
| Input Bias Current | [DATA_NEEDED: input bias current] | — |
| Slew Rate | [DATA_NEEDED: slew rate] | — |
| Number of Amplifiers | — | 1 circuit |
| Recommended Source Impedance | — | 200 Ω |
| Architecture | — | Current-feedback circuitry |
| Gain-Setting Resistors | — | Internal, 100 Ω |
| Package Pitch | — | 7.62 mm (0.300 inch) |
| Signal Type | — | Differential low-level analog signal |
| Primary Application | — | Balanced low-impedance microphone signal acquisition |
| RoHS Compliance | — | [DATA_NEEDED: RoHS compliance status] |
| REACH Compliance | — | [DATA_NEEDED: REACH compliance status] |