INA128P vs INA131BP Perbandingan
Perbandingan bersamaan detil INA128P dari Texas Instruments dan INA131BP dari Texas Instruments. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
Perbandingan Spesifikasi
| Parameter Umum | INA128P | INA131BP |
|---|---|---|
| Merek | Texas Instruments | Texas Instruments |
| Kategori | Amplifier ICs | Amplifier ICs |
| Status Lingkungan Hidup | Aktif | Aktif |
| Product Type | Precision instrumentation amplifier | — |
| Architecture | Three-op-amp instrumentation amplifier | — |
| Common-Mode Rejection Ratio | 130 dB minimum | [DATA_NEEDED: common-mode rejection ratio] |
| Offset Voltage | 50 µV maximum | — |
| Offset Voltage Drift | 0.5 µV/°C maximum | — |
| Input Bias Current | 5 nA maximum | [DATA_NEEDED: input bias current] |
| Input Protection | ±40 V | — |
| Supply Voltage Range | ±2.25 V to ±18 V | 2.25 V to 18 V |
| Arus Memerintah | 700 µA | — |
| Bandwidth | 1.3 MHz | — |
| Bandwidth at Gain 100 | 200 kHz | — |
| Slew Rate | 4 V/µs | 0.7 V/µs |
| Paket | 8-pin plastic DIP (PDIP) | — |
| Suhu Kerja | -40 °C to +85 °C | — |
| Input Type | Differential input | — |
| Manufacturer | Texas Instruments | — |
| Status RoHS | [DATA_NEEDED: RoHS status] | — |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| Amplifier Type | — | Precision instrumentation amplifier |
| Internal Amplifier Count | — | 3 amplifiers |
| Nominal Gain | — | 100 V/V |
| Gain Configuration | — | Fixed gain |
| Maximum Total Supply Voltage | — | 50 V |
| Signal Bandwidth | — | 70 kHz |
| Adjustment Method | — | On-chip laser trimming |
| Number of Circuits | — | 1 circuit |
| Package Type | — | 8-pin PDIP |
| Jumlah Pin | — | 8 pins |
| Gaya Mounting | — | Through-hole |
| Temperature Grade | — | Industrial grade |
| Rentang Suhu Kerja | — | [DATA_NEEDED: operating temperature range] |
| Input Offset Voltage | — | [DATA_NEEDED: input offset voltage] |
| Power Supply Rejection Ratio | — | [DATA_NEEDED: power supply rejection ratio] |
| Output Voltage Swing | — | [DATA_NEEDED: output voltage swing] |
| Quiescent Current per Channel | — | [DATA_NEEDED: quiescent current per channel] |
| Input Common-Mode Voltage Range | — | [DATA_NEEDED: input common-mode voltage range] |