INA128U vs INA128P Perbandingan
Perbandingan bersamaan detil INA128U dari Texas Instruments dan INA128P dari Texas Instruments. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
Perbandingan Spesifikasi
| Parameter Umum | INA128U | INA128P |
|---|---|---|
| Merek | Texas Instruments | Texas Instruments |
| Kategori | Amplifier ICs | Amplifier ICs |
| Status Lingkungan Hidup | Aktif | Aktif |
| Device Type | Precision low-power instrumentation amplifier | — |
| Architecture | Three-op-amp instrumentation amplifier | Three-op-amp instrumentation amplifier |
| Number of Amplifiers | 1 amplifier | — |
| Common-Mode Rejection Ratio | 130 dB | 130 dB minimum |
| Minimum Common-Mode Rejection Ratio | 120 dB | — |
| Arus Memerintah | 700 µA | 700 µA |
| Maximum Input Offset Voltage | 50 µV | — |
| Maximum Input Offset Drift | 0.5 µV/°C | — |
| Maximum Input Bias Current | 5 nA | — |
| Input Protection Range | ±40 V | — |
| Supply Voltage Range | ±2.25 V to ±18 V | ±2.25 V to ±18 V |
| Gain Range | 1 to 100,000 | — |
| Bandwidth at Gain 100 | 200 kHz | 200 kHz |
| Maximum Slew Rate | 4 V/µs | — |
| Maximum Gain-Bandwidth Product | 1.3 MHz | — |
| Paket | 8-pin SOIC | 8-pin plastic DIP (PDIP) |
| Tipe Mounting | Surface mount | — |
| Rentang Suhu Kerja | -40°C to +85°C | — |
| Status RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| Automotive Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | — |
| Product Type | — | Precision instrumentation amplifier |
| Offset Voltage | — | 50 µV maximum |
| Offset Voltage Drift | — | 0.5 µV/°C maximum |
| Input Bias Current | — | 5 nA maximum |
| Input Protection | — | ±40 V |
| Bandwidth | — | 1.3 MHz |
| Slew Rate | — | 4 V/µs |
| Suhu Kerja | — | -40 °C to +85 °C |
| Input Type | — | Differential input |
| Manufacturer | — | Texas Instruments |