INA133UG4 vs INA132UA Perbandingan
Perbandingan bersamaan detil INA133UG4 dari Texas Instruments dan INA132UA dari Texas Instruments. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
Texas Instruments
INA133UG4 - 1.5MHz Precision Differential Amplifier | Texas Instruments
INA133UG4 ✓ AktifPerbandingan Spesifikasi
| Parameter Umum | INA133UG4 | INA132UA |
|---|---|---|
| Merek | Texas Instruments | Texas Instruments |
| Kategori | Amplifier ICs | Amplifier ICs |
| Status Lingkungan Hidup | Aktif | Aktif |
| Product Type | Precision difference amplifier | Low-power, unity-gain difference amplifier |
| Number of Circuits | 1 circuit | — |
| -3 dB Bandwidth | 1.5 MHz | — |
| Slew Rate | 5 V/µs | 100 mV/us minimum |
| Input Offset Voltage | 150 µV minimum; 450 µV maximum | 500 uV maximum |
| Arus Memerintah | 950 µA | 160 uA |
| Supply Voltage Range | 4.5 V to 36 V | — |
| Rentang Tegangan Output | ±2.25 V to ±18 V | — |
| Differential Gain | 1 V/V | — |
| Paket | 8-SOIC (0.154 inch, 3.90 mm width) | 8-pin SOIC |
| Tipe Mounting | Surface mount | Surface mount |
| Rentang Suhu Kerja | [DATA_NEEDED: operating temperature range] | -55°C to +125°C |
| Input Common-Mode Range | [DATA_NEEDED: input common-mode voltage range] | — |
| Common-Mode Rejection Ratio | [DATA_NEEDED: common-mode rejection ratio] | — |
| Tetesan Bising | [DATA_NEEDED: input noise density] | — |
| Rail-to-Rail Output | [DATA_NEEDED: rail-to-rail output capability] | — |
| Status RoHS | Compliant | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| Number of Channels | — | 1 channel |
| Gain | — | 1 V/V (unity gain) |
| Single-Supply Voltage Range | — | Up to 36 V |
| Dual-Supply Voltage Range | — | ±18 V |
| Gain-Bandwidth Product | — | 300 kHz |
| Gain Error | — | ±0.075% maximum |
| Nonlinearity | — | 0.001% maximum |
| Common-Mode Rejection | — | 90 dB minimum |
| Internal Gain Resistors | — | Laser trimmed |