INA2137PA vs INA2137PAG4 Perbandingan
Perbandingan bersamaan detil INA2137PA dari Texas Instruments dan INA2137PAG4 dari Texas Instruments. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
Perbandingan Spesifikasi
| Parameter Umum | INA2137PA | INA2137PAG4 |
|---|---|---|
| Merek | Texas Instruments | Texas Instruments |
| Kategori | Amplifier ICs | Amplifier ICs |
| Status Lingkungan Hidup | Aktif | Aktif |
| Product Type | Dual audio differential line receiver | — |
| Channel Count | 2 channels | 2 channels |
| Nominal Gain Option 1 | 0.5 (-6 dB) | — |
| Nominal Gain Option 2 | 2 (+6 dB) | — |
| Paket | 14-pin PDIP (N) | 14-pin PDIP |
| Tipe Mounting | Through-hole | Through-hole |
| Supply Voltage Options | 9 V, 12 V, 15 V, 18 V, 24 V, or 28 V | — |
| Input Configuration | Differential | — |
| Signal Category | Audio | — |
| Manufacturer | Texas Instruments | — |
| Rentang Suhu Kerja | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Arus Pemuat | [DATA_NEEDED: supply current] | — |
| Rentang Tegangan Masukan | [DATA_NEEDED: input voltage range] | — |
| Rentang Tegangan Output | [DATA_NEEDED: output voltage range] | — |
| Frequency Response | [DATA_NEEDED: frequency response] | [DATA_NEEDED: frequency response] |
| Noise Performance | [DATA_NEEDED: input noise voltage or noise density] | — |
| Common-Mode Rejection Ratio | [DATA_NEEDED: common-mode rejection ratio] | 90 dB |
| Bandwidth | [DATA_NEEDED: bandwidth] | — |
| Power Dissipation | [DATA_NEEDED: power dissipation] | — |
| Status RoHS | [DATA_NEEDED: RoHS status] | unknown |
| REACH Status | [DATA_NEEDED: REACH status] | unknown |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| Lead-Free Status | [DATA_NEEDED: lead-free status] | unknown |
| Halogen-Free Status | [DATA_NEEDED: halogen-free status] | — |
| Device Type | — | Dual audio differential line receiver |
| Gain | — | 1/2 or 2 (±6 dB) |
| Supply Voltage Range | — | ±18 V (36 V total) |
| Slew Rate | — | 14 V/µs |
| Maximum Quiescent Current | — | 2.9 mA |
| Settling Accuracy | — | 0.01% |
| Distortion Test Frequency | — | 1 kHz |
| Input Common-Mode Voltage Range | — | [DATA_NEEDED: input common-mode voltage range] |
| Output Voltage Swing | — | [DATA_NEEDED: output voltage swing] |
| Input Offset Voltage | — | [DATA_NEEDED: input offset voltage] |
| Open-Loop Gain | — | [DATA_NEEDED: open-loop gain] |
| Power Supply Rejection Ratio | — | [DATA_NEEDED: power supply rejection ratio] |