ISO1042BDW vs ISO1042DW Perbandingan
Perbandingan bersamaan detil ISO1042BDW dari Texas Instruments dan ISO1042DW dari Texas Instruments. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
Texas Instruments
ISO1042BDW - Isolated CAN Transceiver, 5Mbps, ±70V Bus Fault | TI
ISO1042BDW ✓ AktifPerbandingan Spesifikasi
| Parameter Umum | ISO1042BDW | ISO1042DW |
|---|---|---|
| Merek | Texas Instruments | Texas Instruments |
| Kategori | Voltage Regulators | Interface ICs |
| Status Lingkungan Hidup | Aktif | Aktif |
| Protocol | CAN, CAN FD | — |
| Number of Transceivers | 1 | — |
| Laju Data | 5 Mbps (CAN FD) | — |
| Isolation Voltage | 5000 VRMS | — |
| Bus Fault Protection | ±70 V DC | — |
| Common-Mode Voltage Range | ±30 V | ±30 V |
| Supply Voltage (VCC1) | 1.8 V to 5.5 V | — |
| Supply Voltage (VCC2) | 4.5 V to 5.5 V | — |
| Suhu Kerja | -40C to +125C | — |
| Paket | 16-SOIC (DW) Wide-Body | 16-pin wide-body SOIC (DW) |
| Tipe Mounting | Surface Mount | Surface mount |
| Jumlah Pin | 16 | — |
| ESD Protection | [DATA_NEEDED: ESD HBM/CDM rating] | — |
| Status RoHS | Compliant | — |
| Compliance | ISO 11898-2 (2016) | — |
| Product Type | — | Galvanically isolated CAN FD transceiver |
| Maximum CAN FD Data Rate | — | 5 Mbps |
| Classic CAN Data Rate | — | 1 Mbps |
| CAN Physical-Layer Standard | — | ISO 11898-2:2016 |
| DC Bus Fault Protection | — | ±70 V DC |
| Loop Delay | — | 152 ns |
| Supply Voltage Range | — | 1.8 V to 5.5 V |
| Isolation Type | — | Reinforced galvanic isolation |
| Rentang Suhu Kerja | — | -40 °C to +125 °C |
| Bus-Side ESD Tolerance | — | HBM ESD protection; rating [DATA_NEEDED: HBM ESD voltage] |
| Transceiver Count | — | 1 transceiver |
| Logic-Side Supply | — | 1.8 V to 5.5 V |
| RoHS Compliance | — | [DATA_NEEDED: RoHS status] |
| REACH Compliance | — | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification status] |