ISO1042BDWVR vs ISO1042DWV Perbandingan
Perbandingan bersamaan detil ISO1042BDWVR dari Texas Instruments dan ISO1042DWV dari Texas Instruments. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
Texas Instruments
ISO1042DWV - 5 Mbps Reinforced Isolated CAN | Texas Instruments
ISO1042DWV ✓ AktifPerbandingan Spesifikasi
| Parameter Umum | ISO1042BDWVR | ISO1042DWV |
|---|---|---|
| Merek | Texas Instruments | Texas Instruments |
| Kategori | Interface ICs | Interface ICs |
| Status Lingkungan Hidup | Aktif | Aktif |
| Product Type | Isolated CAN transceiver | Digitally isolated CAN transceiver |
| Protocol | CAN / CAN FD (ISO11898-2 2016) | — |
| Laju Data | Up to 5 Mbps (flexible data rate) | — |
| Bus Fault Protection | 70 V | — |
| Working Isolation Voltage | 1060 Vrms | — |
| Isolation Type | Basic isolation, capacitive barrier | Reinforced |
| Logic-Side Supply Range (VCC1) | 1.8 V to 5.5 V | — |
| Bus-Side Supply Range (VCC2) | [DATA_NEEDED: bus-side supply range] | — |
| Loop Delay | 152 ns | 152 ns |
| ESD Protection (Bus Pins) | +/-16 kV HBM | — |
| Duplex | Half duplex, 1 driver / 1 receiver | — |
| Suhu Kerja | -40C to +125C | — |
| Paket | 8-pin SOIC (DWV), wide body | 8-pin wide-body SOIC (DWV) |
| Tipe Mounting | Surface Mount | Surface mount |
| Protection Features | Thermal shutdown, bus fault protection | — |
| Status RoHS | Compliant | [DATA_NEEDED: RoHS status] |
| Classic CAN Data Rate | — | 1 Mbps |
| CAN FD Data Rate | — | 5 Mbps |
| DC Bus Fault Protection | — | ±70 V |
| Common-Mode Voltage Range | — | ±30 V |
| Isolation Withstand Voltage | — | 5000 VRMS |
| CAN Physical-Layer Standard | — | ISO 11898-2:2016 |
| Jumlah Pin | — | 8 pins |
| Evaluation Module | — | ISO1042DWVEVM |
| REACH Status | — | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification status] |
| Rentang Suhu Kerja | — | [DATA_NEEDED: operating temperature range] |
| Supply Voltage Range | — | [DATA_NEEDED: supply voltage range] |