ISO1042QDWRQ1 vs TJA1052IT Perbandingan
Perbandingan bersamaan detil ISO1042QDWRQ1 dari Texas Instruments dan TJA1052IT dari NXP Semiconductors. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
Perbandingan Spesifikasi
| Parameter Umum | ISO1042QDWRQ1 | TJA1052IT |
|---|---|---|
| Merek | Texas Instruments | NXP Semiconductors |
| Kategori | Interface ICs | Interface ICs |
| Status Lingkungan Hidup | Aktif | Aktif |
| Product Type | Galvanically isolated CAN transceiver | — |
| CAN Standard | ISO11898-2 (2016) | — |
| Maximum Data Rate | 5 Mbps | — |
| CAN FD Support | Up to 5 Mbps | — |
| DC Bus Fault Protection | ±70 V | — |
| Common-Mode Voltage Range | ±30 V | — |
| Isolation Type | Galvanic isolation | Galvanic (integrated, reinforced) |
| Application Classification | Automotive | — |
| Paket | 16-pin SOIC | — |
| Package Width | 7.50 mm | — |
| Tipe Mounting | Surface mount | Surface Mount |
| Rentang Suhu Kerja | [DATA_NEEDED: operating temperature range] | — |
| Supply Voltage Range | [DATA_NEEDED: supply voltage range] | — |
| Controller-Side Supply Current | [DATA_NEEDED: controller-side supply current] | — |
| Isolation Working Voltage | [DATA_NEEDED: isolation working voltage] | — |
| Transient Isolation Voltage | [DATA_NEEDED: transient isolation voltage] | — |
| RoHS Compliance | [DATA_NEEDED: RoHS compliance status] | — |
| REACH Compliance | [DATA_NEEDED: REACH compliance status] | — |
| Fungsi | — | Galvanically Isolated High-Speed CAN Transceiver |
| Laju Data | — | Up to 1 Mbit/s |
| Protocol | — | ISO 11898-2 (High-Speed CAN) |
| Number of Drivers/Receivers | — | 1/1 |
| Supply Voltage - VCC (logic side) | — | 3 V to 5.25 V |
| Supply Voltage - VBUS (bus side) | — | 4.75 V to 7 V [DATA_NEEDED: exact VBUS range from datasheet] |
| Suhu Kerja | — | -40 C to +125 C |
| Paket / Case | — | 16-SOIC (SO-16, narrow body) |
| Common-Mode Transient Immunity | — | [DATA_NEEDED: CMTI value from datasheet] |
| ESD Protection | — | [DATA_NEEDED: HBM/CDM ESD rating] |
| Loop Delay (typical) | — | [DATA_NEEDED: typical TX-to-RX loop delay] |
| Target Application | — | EV / HEV automotive high-voltage CAN |
| Status RoHS | — | Compliant |
| AEC-Q100 | — | Qualified (automotive grade) |
| Level MSL | — | [DATA_NEEDED: MSL rating] |