ISO121G vs ISO120SG Perbandingan
Perbandingan bersamaan detil ISO121G dari Texas Instruments dan ISO120SG dari Texas Instruments. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
Perbandingan Spesifikasi
| Parameter Umum | ISO121G | ISO120SG |
|---|---|---|
| Merek | Texas Instruments | Texas Instruments |
| Kategori | Amplifier ICs | Amplifier ICs |
| Status Lingkungan Hidup | Unknown | Unknown |
| Product Type | Precision isolated amplifier | Precision low-cost isolation amplifier |
| Input Signal Range | ±10 V | — |
| Isolation Rating | 3500 Vrms partial-discharge tested | — |
| Differential Capacitive Barrier | 2 pF | — |
| Nonlinearity | ±0.01% maximum | ±0.01% maximum at the precision operating condition |
| Input Operation | Bipolar operation | — |
| Carrier Frequency | User controlled | User controlled |
| Common-Mode Transient Immunity | High at 60 Hz; quantitative value not provided | — |
| Amplifier Circuit Count | 1 circuit | — |
| Tegangan Pemuat | [DATA_NEEDED: supply voltage range] | [DATA_NEEDED: ISO120SG supply voltage range] |
| Gain | [DATA_NEEDED: gain configuration] | — |
| Arus Memerintah | [DATA_NEEDED: quiescent current] | — |
| Input Common-Mode Range | [DATA_NEEDED: input common-mode range] | — |
| Rentang Tegangan Output | [DATA_NEEDED: output voltage range] | [DATA_NEEDED: ISO120SG output voltage range] |
| Frequency Response | [DATA_NEEDED: frequency response] | — |
| Rentang Suhu Kerja | [DATA_NEEDED: operating temperature range] | — |
| Paket | 16-CDIP | — |
| Tipe Mounting | Through-hole | — |
| Jumlah Pin | 16 pins | — |
| Status RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: ISO120SG RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: ISO120SG REACH status] |
| AEC-Q100 Qualification | Not specified in verified data | — |
| Isolation Architecture | — | Duty-cycle modulation and demodulation across a 2 pF differential capacitive barrier |
| Signal Bandwidth | — | 60 kHz |
| Isolation Voltage Rating | — | 1500 Vrms |
| Input Offset Voltage Drift | — | 150 µV/°C maximum with the specified external-capacitor and reduced-bandwidth condition |
| Common-Mode Rejection | — | High IMR at 60 Hz |
| Supply Operation | — | Bipolar operation |
| Number of Circuits | — | 1 isolation amplifier per package |
| Package Information | — | 16-CDIP according to the DigiKey listing; 24-CDIP with 16 leads according to the Heisener listing |
| Package Family | — | Ceramic dual in-line package (CDIP) |
| Partial Discharge Qualification | — | 100% tested for partial discharge |
| External Components | — | None required for 60 kHz bandwidth; two external capacitors used for specified precision operation |
| Synchronization | — | ISO120 family synchronization feature |
| Suhu Kerja | — | [DATA_NEEDED: ISO120SG operating temperature range] |
| Input Differential Voltage Range | — | [DATA_NEEDED: ISO120SG input differential voltage range] |