ISO122U vs ISO1211D Perbandingan
Perbandingan bersamaan detil ISO122U dari Texas Instruments dan ISO1211D dari Texas Instruments. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
Perbandingan Spesifikasi
| Parameter Umum | ISO122U | ISO1211D |
|---|---|---|
| Merek | Texas Instruments | Texas Instruments |
| Kategori | Amplifier ICs | Interface ICs |
| Status Lingkungan Hidup | Aktif | Aktif |
| Device Type | Precision isolation amplifier | Single-channel isolated 24V to 60V digital input receiver |
| Number of Channels | 1 circuit | — |
| Input Signal Range | ±10 V | — |
| Maximum Nonlinearity | 0.020% | — |
| Signal Bandwidth | 50 kHz | — |
| Input Offset-Voltage Drift | 200 V/°C | — |
| Isolation Voltage | 1500 Vrms | — |
| Power-Supply Range | 4.5 V to 18 V | — |
| VS1 Quiescent Current | 5 mA | — |
| VS2 Quiescent Current | ±5.5 mA | — |
| Gain Configuration | Fixed unity gain | — |
| External Components Required | None | — |
| High-Voltage Breakdown Test Coverage | 100% | — |
| Paket | 8-pin SOIC | 8-pin SOIC (D) |
| Tipe Mounting | Surface mount | — |
| Operating Voltage | ±4.5 V to ±18 V | — |
| Status RoHS | [DATA_NEEDED: RoHS compliance status] | unknown |
| Rentang Suhu Kerja | [DATA_NEEDED: operating temperature range] | -40C to +125C |
| Supported Digital Input Range | — | 24V to 60V |
| External-Resistor DC Input Support | — | 9V to 300V DC |
| External-Resistor AC Input Support | — | 9V to 300V AC |
| IEC 61131-2 Input Characteristics | — | Type 1, Type 2, and Type 3 |
| Type 3 Current Limit | — | 2.2mA to 2.47mA |
| Input Type | — | Bipolar input |
| Broken-Wire Detection | — | Supported |
| Package Code | — | D |
| Terminal Count | — | 8 terminals |
| Gaya Mounting | — | Surface mount |
| Primary Application | — | PLC digital input modules |
| Isolation Category | — | Isolated digital input receiver |
| Manufacturer | — | Texas Instruments |
| REACH Status | — | unknown |
| AEC-Q100 Qualification | — | not_applicable |