ISP752TFUMA1 vs BTS426L1E3062AAUMA1 Perbandingan
Perbandingan bersamaan detil ISP752TFUMA1 dari Infineon dan BTS426L1E3062AAUMA1 dari Infineon. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
Perbandingan Spesifikasi
| Parameter Umum | ISP752TFUMA1 | BTS426L1E3062AAUMA1 |
|---|---|---|
| Merek | Infineon | Infineon |
| Kategori | Power MOSFET Drivers | Power MOSFET Drivers |
| Status Lingkungan Hidup | Aktif | Aktif |
| Product Type | Smart High-Side Power Switch | — |
| Series | PROFET™ Industrial | — |
| Switch Configuration | 1:1 (Single channel) | — |
| Konfigurasi Output | High-Side | High-Side |
| Tipe Output | N-Channel | — |
| On-Resistance (Ron) | 200 mOhm | — |
| Continuous Load Current | 1.3 A | 7 A |
| Tegangan Pemuat Kerja | 6 V to 52 V | — |
| Input Type | Non-Inverting (logic-level) | CMOS-compatible, ground-referenced |
| Suhu Kerja | -30 C to +85 C | — |
| Paket / Case | PG-DSO-8-24 (DSO-8 with exposed pad) | — |
| Tipe Mounting | Surface Mount | Surface Mount |
| Fault Protection | Overcurrent; Short-Circuit; Overtemperature; Overvoltage (load-dump); Reverse voltage | — |
| Diagnostic Output | Status flag | Yes (ST pin, ground-referenced feedback) |
| Status RoHS | Compliant | Compliant |
| Manufacturer | — | Infineon Technologies |
| Product Family | — | Classic PROFET 12V |
| Fungsi | — | Smart High-Side Power Switch |
| Topologi | — | N-Channel Vertical Power FET with Charge Pump |
| Jumlah Output | — | 1 |
| Typical On-State Resistance (RDS(on)) | — | 5 mΩ |
| Nominal Operating Voltage | — | 12 V (automotive) |
| Embedded Protections | — | Overload, Thermal Shutdown, Overvoltage Clamp, ESD |
| Technology | — | Smart SIPMOS, monolithic |
| Paket | — | PG-TO263-5-2 (DPAK-5, surface mount) |
| Rentang Suhu Kerja | — | -40 °C to +150 °C [DATA_NEEDED: exact Tj limit per datasheet section] |
| Automotive Qualification | — | AEC-Q100 (per Classic PROFET 12V family) |