KSZ9131RNXC-TR vs KSZ9131RNXI Perbandingan

Perbandingan bersamaan detil KSZ9131RNXC-TR dari Microchip Technology dan KSZ9131RNXI dari Microchip Technology. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.

Microchip Technology
KSZ9131RNXC-TR KSZ9131RNXC-TR - Gigabit Ethernet PHY Transceiver, RGMII, QFN-48

KSZ9131RNXC-TR - Gigabit Ethernet PHY Transceiver, RGMII, QFN-48

KSZ9131RNXC-TR ✓ Aktif
Microchip Technology
KSZ9131RNXI KSZ9131RNXI - Gigabit Ethernet Transceiver | Microchip

KSZ9131RNXI - Gigabit Ethernet Transceiver | Microchip

KSZ9131RNXI ✓ Aktif

Perbandingan Spesifikasi

Parameter Umum KSZ9131RNXC-TR KSZ9131RNXI
Merek Microchip Technology Microchip Technology
Kategori Interface ICs Interface ICs
Status Lingkungan Hidup Aktif Aktif
Product Type Ethernet PHY Transceiver —
Laju Data 10/100/1000 Mbps (Triple-Speed) —
Standards IEEE 802.3, 802.3u, 802.3ab, 802.3az —
MAC Interface RGMII / GMII / MII —
Media Interface Twisted Pair (CAT-5/5e/6 UTP) —
Tegangan Pemuat 3.3 V (single supply, internal 1.2 V LDO) —
Typical Power Consumption 600 mW (1000Base-T link) —
Paket 48-pin QFN (7x7 mm) 48-QFN (7 x 7 mm)
Rentang Suhu Kerja -40 C to +85 C (industrial) —
Auto-Negotiation Yes (IEEE 802.3 Clause 28) 10/100/1000 Mbps and half/full duplex
Auto-MDI/MDIX Yes (HP Auto-MDIX, all speeds) —
Energy Efficient Ethernet Yes (IEEE 802.3az) —
Cable Diagnostics LinkMD cable fault detection —
Wake-on-LAN Supported Supported with custom-packet detection
Number of Transceivers 1 —
AEC-Q100 Qualification Yes (automotive grade) —
Tipe Mounting Surface Mount Surface mount
Status RoHS Compliant —
Ethernet Data Rate — 10/100/1000 Mbps
Duplex Support — Half-duplex and full-duplex
Ethernet Compliance — IEEE 802.3 compliant
Host Interface — GMII/MII/RGMII
I/O Voltage Tolerance — 3.3 V, 2.5 V, and 1.8 V
Primary Supply — 3.3 V
Reference Clock Output — 125 MHz
RGMII Clock Frequency — 125 MHz
RGMII Clock Period — 8 ns
Differential Pair Termination — On-chip resistors
Power Architecture — Single 3.3 V operation with one external FET
LED Functions — Programmable link, activity, and speed outputs
Low-Power Mode — Energy-detect power-down
Cable Diagnostic — LinkMD TDR-based diagnostic
Baseline Wander — Correction supported
Suhu Kerja — [DATA_NEEDED: operating temperature range]
RoHS Compliance — [DATA_NEEDED: RoHS compliance status]
REACH Compliance — [DATA_NEEDED: REACH compliance status]

Spek dan Sumber

Buka Semua Produk Buat BOM Ajukan Diskon