LM211DRE4 vs LM211DR Perbandingan
Perbandingan bersamaan detil LM211DRE4 dari Texas Instruments dan LM211DR dari Texas Instruments. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
Perbandingan Spesifikasi
| Parameter Umum | LM211DRE4 | LM211DR |
|---|---|---|
| Merek | Texas Instruments | Texas Instruments |
| Kategori | Amplifier ICs | Amplifier ICs |
| Status Lingkungan Hidup | Aktif | Aktif |
| Comparator Type | Single differential voltage comparator with strobes | Single high-speed differential comparator |
| Propagation Delay | 115 ns | — |
| Supply Voltage Range | 3.5 V to 30 V | 3.5 V to 30 V |
| Single-Supply Operation | 5 V to 30 V | — |
| Split-Supply Operation | ±15 V | — |
| Tipe Output | Open collector | Open-collector / open-emitter |
| Logic Compatibility | TTL, MOS, DTL, and RTL compatible | DTL, MOS, RTL, and TTL |
| Number of Channels | 1 channel | — |
| Paket | 8-pin SOIC | 8-pin SOIC |
| Jumlah Pin | 8 pins | — |
| Tipe Mounting | Surface mount | Surface mount |
| Rentang Suhu Kerja | -40°C to 85°C | [DATA_NEEDED: operating temperature range] |
| Strobe Inputs | 2 strobe inputs | — |
| Output-Level Compatibility | Compatible with most TTL and MOS circuits | — |
| Load-Driving Capability | Capable of driving lamps or relays | — |
| Status RoHS | [DATA_NEEDED: RoHS status] | unknown |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| Automotive Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | — |
| Response Time | — | 115 ns |
| Positive Logic Supply Example | — | 5 V |
| Dual-Supply Example | — | ±15 V |
| Input Configuration | — | Differential |
| Comparator Quantity | — | 1 comparator |
| Output Drive Capability | — | Lamp or relay switching |
| Strobe Function | — | Differential comparator with strobe |
| Input Common-Mode Voltage Range | — | [DATA_NEEDED: input common-mode voltage range] |
| Input Offset Voltage | — | [DATA_NEEDED: input offset voltage] |
| Input Bias Current | — | [DATA_NEEDED: input bias current] |
| Output Current | — | [DATA_NEEDED: output current] |