LM2901D vs LM2901VD Perbandingan
Perbandingan bersamaan detil LM2901D dari Texas Instruments dan LM2901VD dari onsemi. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
Perbandingan Spesifikasi
| Parameter Umum | LM2901D | LM2901VD |
|---|---|---|
| Merek | Texas Instruments | onsemi |
| Kategori | Amplifier ICs | Amplifier ICs |
| Status Lingkungan Hidup | Aktif | Aktif |
| Comparator Type | Quad differential voltage comparator | 4-channel differential comparator |
| Number of Channels | 4 channels | 4 |
| Supply Voltage Range | Single supply, 5 V to 36 V | 3 V to 36 V |
| Differential Input Voltage Range | ±1 V to ±18 V | [DATA_NEEDED: differential input voltage range] |
| Maximum Supply Voltage | 30 V | — |
| Tipe Output | Open collector | Open collector |
| Propagation Delay | 300 ns | [DATA_NEEDED: propagation delay] |
| Input Bias Current | 25 nA typical | 25 nA typical |
| Input Offset Current | ±5.0 nA typical | ±5.0 nA typical |
| Input Offset Voltage | [DATA_NEEDED: input offset voltage] | — |
| Arus Pemuat | [DATA_NEEDED: supply current per comparator] | — |
| Rentang Suhu Kerja | -40 °C to +125 °C | [DATA_NEEDED: operating temperature range] |
| Paket | 14-pin SOIC | 14-pin SOIC |
| Tipe Mounting | Surface mount | Surface mount |
| Supply Configuration | Single or split supply | Single or split supply |
| Logic Compatibility | TTL, CMOS, MOS, DTL, and ECL | TTL compatible |
| Automotive Application | Supported | — |
| Status RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| Primary Application | — | Level detection, low-level sensing, and memory applications |
| Automotive Qualification | — | [DATA_NEEDED: automotive qualification status] |
| Common-Mode Input Voltage Range | — | [DATA_NEEDED: common-mode input voltage range] |
| Output Sink Current | — | [DATA_NEEDED: output sink current] |
| Output Saturation Voltage | — | [DATA_NEEDED: output saturation voltage] |
| Lead-Free Status | — | [DATA_NEEDED: lead-free status] |