LM2901VDG vs LM2901VD Perbandingan
Perbandingan bersamaan detil LM2901VDG dari onsemi dan LM2901VD dari onsemi. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
Perbandingan Spesifikasi
| Parameter Umum | LM2901VDG | LM2901VD |
|---|---|---|
| Merek | onsemi | onsemi |
| Kategori | Amplifier ICs | Amplifier ICs |
| Status Lingkungan Hidup | Aktif | Aktif |
| Comparator Type | General-purpose differential comparator | 4-channel differential comparator |
| Number of Channels | 4 channels | 4 |
| Single-Supply Voltage Range | 3 V to 36 V | — |
| Dual-Supply Voltage Range | ±1.5 V to ±18 V | — |
| Tested Maximum Supply Voltage | 30 V | — |
| Tipe Output | Open-collector, CMOS and TTL compatible | Open collector |
| Input Offset Voltage | 2 mV | — |
| Input Bias Current | 25 nA | 25 nA typical |
| Supply-Current Drain | 0.8 mA typical | — |
| Rentang Suhu Kerja | -40°C to +125°C | [DATA_NEEDED: operating temperature range] |
| Paket | 14-SOIC, 0.154 inch / 3.90 mm width | 14-pin SOIC |
| Tipe Mounting | Surface mount | Surface mount |
| Manufacturer Description | Single-supply quad comparator | — |
| Status RoHS | [DATA_NEEDED: RoHS compliance] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH compliance] | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| Lead-Free Status | [DATA_NEEDED: lead-free status] | [DATA_NEEDED: lead-free status] |
| Halogen-Free Status | [DATA_NEEDED: halogen-free status] | — |
| Input Common-Mode Range | [DATA_NEEDED: input common-mode voltage range] | — |
| Differential Input Voltage Range | [DATA_NEEDED: differential input voltage range] | [DATA_NEEDED: differential input voltage range] |
| Response Time | [DATA_NEEDED: comparator response time] | — |
| Output Sink Current | [DATA_NEEDED: output sink current] | [DATA_NEEDED: output sink current] |
| Supply Voltage Range | — | 3 V to 36 V |
| Input Offset Current | — | ±5.0 nA typical |
| Logic Compatibility | — | TTL compatible |
| Supply Configuration | — | Single or split supply |
| Primary Application | — | Level detection, low-level sensing, and memory applications |
| Automotive Qualification | — | [DATA_NEEDED: automotive qualification status] |
| Common-Mode Input Voltage Range | — | [DATA_NEEDED: common-mode input voltage range] |
| Propagation Delay | — | [DATA_NEEDED: propagation delay] |
| Output Saturation Voltage | — | [DATA_NEEDED: output saturation voltage] |