LM2902KDBR vs LM2902KVQDR Perbandingan
Perbandingan bersamaan detil LM2902KDBR dari Texas Instruments dan LM2902KVQDR dari Texas Instruments. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
Texas Instruments
LM2902KDBR - Quad 26V 1.2MHz Op Amp | Texas Instruments (Tape & Reel)
LM2902KDBR ✓ AktifPerbandingan Spesifikasi
| Parameter Umum | LM2902KDBR | LM2902KVQDR |
|---|---|---|
| Merek | Texas Instruments | Texas Instruments |
| Kategori | Amplifier ICs | Amplifier ICs |
| Status Lingkungan Hidup | Aktif | Aktif |
| Number of Amplifier Channels | 4 channels | — |
| Amplifier Type | General-purpose operational amplifier | Quad general-purpose operational amplifier |
| Maximum Supply Voltage | 26 V | 30 V |
| Gain-Bandwidth Product | 1.2 MHz | 1.2 MHz |
| ESD Protection | 2 kV improved ESD | — |
| Typical Input Offset Voltage | 3 mV | — |
| Typical Input Offset Current | 2 nA | — |
| Typical Supply-Current Drain | 0.8 mA | — |
| Common-Mode Input Range | Includes ground | To ground |
| Rentang Suhu Kerja | -40°C to +125°C | -40°C to +125°C |
| Paket | 14-pin SSOP (DB) | 14-pin SOIC |
| Package Width | 5.30 mm | — |
| Tipe Mounting | Surface mount | Surface mount |
| Device Family | LM2902K improved LM2902B generation | — |
| Status RoHS | Unknown | [DATA_NEEDED: RoHS status] |
| REACH Status | Unknown | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | Unknown | — |
| Lead-Free Status | Unknown | — |
| Total Supply Voltage | [DATA_NEEDED: total supply voltage including ground connection] | — |
| Output Current | [DATA_NEEDED: output current] | — |
| Input Bias Current | [DATA_NEEDED: input bias current] | — |
| Slew Rate | [DATA_NEEDED: slew rate] | — |
| Open-Loop Gain | [DATA_NEEDED: open-loop gain] | — |
| Unity-Gain Bandwidth | [DATA_NEEDED: unity-gain bandwidth] | — |
| Number of Amplifiers | — | 4 amplifiers |
| Number of Circuits | — | 4 circuits |
| Improved ESD Protection | — | 2 kV |
| Input Offset Voltage | — | 600 µV typical |
| Differential Input Voltage Capability | — | High differential input voltage capability |
| Supply Configuration | — | Single supply or split supply |
| Compensation | — | Internally frequency compensated |
| Channel Independence | — | 4 independent amplifiers |