LM2902MX vs LM2902MX-ON Perbandingan
Perbandingan bersamaan detil LM2902MX dari Texas Instruments dan LM2902MX-ON dari onsemi. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
Perbandingan Spesifikasi
| Parameter Umum | LM2902MX | LM2902MX-ON |
|---|---|---|
| Merek | Texas Instruments | onsemi |
| Kategori | Amplifier ICs | Amplifier ICs |
| Status Lingkungan Hidup | Aktif | Aktif |
| Number of Amplifier Channels | 4 channels | 4 circuits |
| Maximum Supply Voltage | 26 V | — |
| Typical Gain-Bandwidth Product | 1.2 MHz | — |
| Typical Input Offset Voltage | 2 mV | — |
| Typical Open-Loop DC Gain | 100 dB | — |
| Minimum Common-Mode Rejection Ratio | 50 dB | — |
| Amplifier Architecture | Bipolar | — |
| Frequency Compensation | Internally frequency compensated | — |
| Supply Configuration | Single supply | — |
| Paket | 14-pin SOIC | 14-pin SOP |
| Tipe Mounting | Surface mount | Surface mount |
| Rentang Suhu Kerja | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Input Bias Current | [DATA_NEEDED: input bias current] | [DATA_NEEDED: input bias current] |
| Input Common-Mode Voltage Range | [DATA_NEEDED: input common-mode voltage range] | — |
| Output Swing | [DATA_NEEDED: output voltage swing] | — |
| Slew Rate | [DATA_NEEDED: slew rate] | [DATA_NEEDED: slew rate] |
| Arus Pemuat | [DATA_NEEDED: supply current] | — |
| Status RoHS | unknown | [DATA_NEEDED: RoHS status] |
| REACH Status | unknown | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | unknown | — |
| Product Type | — | General-purpose operational amplifier |
| Channel Architecture | — | Quad |
| Jumlah Pin | — | 14 pins |
| Tegangan Pemuat | — | ±16 V or 32 V |
| Gain Bandwidth Product | — | [DATA_NEEDED: gain bandwidth product] |
| Input Offset Voltage | — | [DATA_NEEDED: input offset voltage] |
| Differential Input Impedance | — | [DATA_NEEDED: differential input impedance] |
| Output Voltage Swing | — | [DATA_NEEDED: output voltage swing] |
| Output Current | — | [DATA_NEEDED: output current] |
| Common-Mode Input Range | — | [DATA_NEEDED: common-mode input voltage range] |
| Supply Current per Channel | — | [DATA_NEEDED: supply current per channel] |