LM2903DG4 vs LM2903QDRG4 Perbandingan
Perbandingan bersamaan detil LM2903DG4 dari Texas Instruments dan LM2903QDRG4 dari Texas Instruments. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
Perbandingan Spesifikasi
| Parameter Umum | LM2903DG4 | LM2903QDRG4 |
|---|---|---|
| Merek | Texas Instruments | Texas Instruments |
| Kategori | Amplifier ICs | Amplifier ICs |
| Status Lingkungan Hidup | Aktif | Aktif |
| Comparator Type | Dual differential comparator | Dual differential comparator |
| Number of Channels | 2 channels | 2 independent channels |
| Supply Configuration | Single or dual supply | — |
| Maximum-Rated Supply Voltage | 32 V | — |
| Tested Differential Input Voltage | 30 V | — |
| Supply-Current Drain | 0.4 mA typical per comparator | — |
| Tipe Output | Open-collector | Open collector |
| Output Compatibility | TTL, MOS, and CMOS compatible | — |
| Common-Mode Input Range | Includes ground | — |
| Paket | 8-pin SOIC, 0.154 inch (3.90 mm) width | 8-pin SOIC |
| Tipe Mounting | Surface mount | Surface mount |
| Rentang Suhu Kerja | [DATA_NEEDED: operating temperature range] | -40°C to +125°C |
| Input Offset Voltage | [DATA_NEEDED: input offset voltage] | [DATA_NEEDED: input offset voltage] |
| Input Bias Current | [DATA_NEEDED: input bias current] | 25 nA typical |
| Output Low-Level Voltage | [DATA_NEEDED: output low-level voltage] | — |
| Output Sink Current | [DATA_NEEDED: output sink current] | [DATA_NEEDED: output sink current] |
| Status RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS compliance status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH compliance status] |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | [DATA_NEEDED: AEC-Q100 qualification status] |
| Maximum Supply Voltage | — | 36 V |
| Single-Supply Operating Range | — | 2 V to 36 V |
| Dual-Supply Total Range | — | 2 V to 36 V |
| Minimum Positive Supply Offset | — | 1.5 V |
| Supply Current Per Comparator | — | 0.4 mA typical |
| Automotive Qualification Coding | — | G4 ordering suffix |
| Output Pull-Up Requirement | — | [DATA_NEEDED: recommended pull-up resistance] |
| Input Common-Mode Range | — | [DATA_NEEDED: input common-mode voltage range] |
| Propagation Delay | — | [DATA_NEEDED: propagation delay] |