LM2903PT vs LM2903AVQPWR Perbandingan
Perbandingan bersamaan detil LM2903PT dari STMicroelectronics dan LM2903AVQPWR dari Texas Instruments. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
STMicroelectronics
LM2903PT - Dual Low-Power Voltage Comparator, +2V to +36V | STMicroelectronics
LM2903PT ✓ AktifTexas Instruments
LM2903AVQPWR - Dual Differential Comparator | Texas Instruments
LM2903AVQPWR ✓ AktifPerbandingan Spesifikasi
| Parameter Umum | LM2903PT | LM2903AVQPWR |
|---|---|---|
| Merek | STMicroelectronics | Texas Instruments |
| Kategori | Amplifier ICs | Amplifier ICs |
| Status Lingkungan Hidup | Aktif | Aktif |
| Device Type | Dual low-power voltage comparator | — |
| Number of Channels | 2 | 2 |
| Single Supply Voltage Range | +2 V to +36 V | — |
| Dual Supply Voltage Range | +/-1 V to +/-18 V | — |
| Arus Pemuat | 0.4 mA (independent of supply voltage) | — |
| Power Consumption per Comparator | 1 mW at +5 V | — |
| Input Bias Current | 25 nA typical | [DATA_NEEDED: input bias current] |
| Input Offset Current | +/-5 nA typical | — |
| Common-Mode Input Voltage Range | [DATA_NEEDED: common-mode input voltage range] | — |
| Input Offset Voltage | [DATA_NEEDED: input offset voltage] | [DATA_NEEDED: input offset voltage] |
| Differential Input Voltage Range | [DATA_NEEDED: differential input voltage range] | — |
| Konfigurasi Output | [DATA_NEEDED: output stage configuration] | — |
| Output Sink Current | [DATA_NEEDED: output sink current] | — |
| Logic Compatibility | TTL, MOS and CMOS compatible interfaces | — |
| Rentang Suhu Kerja | [DATA_NEEDED: operating temperature range] | -40°C to 125°C |
| Paket | TSSOP-8 (8TSSOP), 8 pins | 8-pin TSSOP (PW) |
| Tipe Mounting | Surface mount | Surface mount |
| Process Technology | Bipolar monolithic | — |
| Status RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| Automotive Qualification (AEC-Q100) | [DATA_NEEDED: AEC-Q100 qualification status] | — |
| Comparator Type | — | Dual differential voltage comparator |
| Supply Configuration | — | Single supply or dual supplies |
| Supply Voltage Range | — | [DATA_NEEDED: supply voltage range] |
| Maximum Tested Supply Voltage | — | 30 V for V-suffix devices; 32 V for non-V devices |
| Supply Current Drain | — | 0.4 mA typical per comparator |
| Tipe Output | — | Open-collector |
| Input Configuration | — | Differential input |
| Lead Temperature | — | [DATA_NEEDED: lead temperature] |
| Response Time | — | [DATA_NEEDED: response time] |
| Common-Mode Input Range | — | [DATA_NEEDED: common-mode input range] |
| Output Saturation Voltage | — | [DATA_NEEDED: output saturation voltage] |
| REACH Status | — | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification] |