LM2903VDR2G vs LM2903DRE4 Perbandingan
Perbandingan bersamaan detil LM2903VDR2G dari onsemi dan LM2903DRE4 dari Texas Instruments. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
Perbandingan Spesifikasi
| Parameter Umum | LM2903VDR2G | LM2903DRE4 |
|---|---|---|
| Merek | onsemi | Texas Instruments |
| Kategori | Amplifier ICs | Amplifier ICs |
| Status Lingkungan Hidup | Aktif | Aktif |
| Comparator Type | Dual independent precision voltage comparator | Dual differential voltage comparator |
| Number of Channels | 2 channels | 2 channels |
| Supply Voltage Range | 2 V to 36 V | 2 V to 36 V |
| Single-Supply Input Common-Mode Range | To ground | — |
| Differential Input Voltage Range | ±18 V | — |
| Input Offset Voltage | As low as 2.0 mV | [DATA_NEEDED: Input offset voltage] |
| Response Time | 1.5 µs | — |
| Tipe Output | Open-collector | Open-collector |
| Output Logic Capability | Wired-AND operation | — |
| Rentang Suhu Kerja | -40 °C to +125 °C | [DATA_NEEDED: Operating temperature range] |
| Paket | 8-pin SOIC | 8-pin SOIC, 0.154 inch width and 3.90 mm width |
| Tipe Mounting | Surface mount | Surface mount |
| Automotive Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | — |
| Input Bias Current | 2 nA to 5 nA | [DATA_NEEDED: Input bias current] |
| Status RoHS | ROHS3 compliant | [DATA_NEEDED: RoHS status] |
| Arus Pemuat | [DATA_NEEDED: typical and maximum supply current] | — |
| Rail-to-Rail Input | — | Yes |
| Propagation Delay | — | 300 ns |
| Supply Current per Comparator | — | 0.4 mA typical |
| Common-Mode Input Range | — | [DATA_NEEDED: Common-mode input voltage range] |
| Output Saturation Voltage | — | [DATA_NEEDED: Output saturation voltage] |
| Differential Input Voltage | — | [DATA_NEEDED: Maximum differential input voltage] |
| Output Compatibility | — | TTL, MOS, and CMOS |
| Single or Dual Supply Operation | — | Single supply or dual supplies |
| REACH Status | — | [DATA_NEEDED: REACH status] |