LM2903VQDRQ1 vs LM393ADR Perbandingan
Perbandingan bersamaan detil LM2903VQDRQ1 dari Texas Instruments dan LM393ADR dari Texas Instruments. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
Texas Instruments
LM2903VQDRQ1 - 36V Dual Automotive Comparator | Texas Instruments
LM2903VQDRQ1 ✓ AktifTexas Instruments
LM393ADR - Dual Open-Collector Comparator | Texas Instruments (Tape & Reel)
LM393ADR ✓ AktifPerbandingan Spesifikasi
| Parameter Umum | LM2903VQDRQ1 | LM393ADR |
|---|---|---|
| Merek | Texas Instruments | Texas Instruments |
| Kategori | Amplifier ICs | Amplifier ICs |
| Status Lingkungan Hidup | Aktif | Aktif |
| Comparator Type | Dual differential comparator | Dual differential comparator |
| Number of Channels | 2 channels | 2 channels |
| Tipe Output | Open-collector | Open collector |
| Supply Voltage Range, Single Supply | 2 V to 36 V | — |
| Supply Voltage Range, Dual Supply | ±1 V to ±18 V | — |
| Differential Input Voltage Range | Up to maximum-rated supply voltage | -38 V to +38 V |
| Common-Mode Input Voltage Range | Includes ground | — |
| Supply-Current Drain | 0.4 mA | — |
| Propagation Delay | Approximately 1.3 µs | — |
| Logic Compatibility | TTL, MOS, and CMOS compatible | — |
| Automotive Qualification | AEC-Q100 Grade 0 and Grade 1 | — |
| Rentang Suhu Kerja | -40 °C to +125 °C | 0 C to +70 C |
| Paket | 8-pin SOIC (D) | 8-SOIC |
| Package Width | 3.90 mm | — |
| Package Length | 0.154 inch | — |
| Tipe Mounting | Surface mount | Surface mount |
| Status RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| Lead-Free Status | [DATA_NEEDED: lead-free status] | — |
| Common-Mode Input Range | — | Includes ground |
| Output Compatibility | — | TTL, MOS, and CMOS |
| Application Grade | — | Commercial grade |
| Supply Voltage Range | — | [DATA_NEEDED: supply voltage range] |
| Input Offset Voltage | — | [DATA_NEEDED: input offset voltage] |
| Comparator Response Time | — | [DATA_NEEDED: comparator response time] |
| Output Sink Current | — | [DATA_NEEDED: output sink current] |
| Output Saturation Voltage | — | [DATA_NEEDED: output saturation voltage] |
| Typical Supply Current per Channel | — | [DATA_NEEDED: typical supply current per channel] |