LM2904PW vs LM2904VDR2G Perbandingan
Perbandingan bersamaan detil LM2904PW dari Texas Instruments dan LM2904VDR2G dari onsemi. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
Perbandingan Spesifikasi
| Parameter Umum | LM2904PW | LM2904VDR2G |
|---|---|---|
| Merek | Texas Instruments | onsemi |
| Kategori | Amplifier ICs | Amplifier ICs |
| Status Lingkungan Hidup | Aktif | Aktif |
| Number of Amplifiers | 2 circuits | — |
| Product Type | Dual general-purpose operational amplifier | — |
| Maximum Supply Voltage | 26 V | — |
| Gain-Bandwidth Product | 700 kHz | 1 MHz |
| Typical Supply Current | 0.7 mA | — |
| Supply-Current Independence | Independent of supply voltage | — |
| Supported Supply Configurations | Single supply or split supply | — |
| Common-Mode Input Range | Includes ground | — |
| Architecture | Voltage feedback, internally frequency compensated | — |
| Paket | 8-TSSOP, 4.40 mm width | 8-SOIC, 3.90 mm body width |
| Package Length | 4.40 mm | — |
| Tipe Mounting | Surface mount | Surface mount |
| Rentang Suhu Kerja | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Input Offset Voltage | [DATA_NEEDED: input offset voltage] | [DATA_NEEDED: input offset voltage] |
| Input Bias Current | [DATA_NEEDED: input bias current] | [DATA_NEEDED: input bias current] |
| Slew Rate | [DATA_NEEDED: slew rate] | 0.6 V/µs |
| Status RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | [DATA_NEEDED: AEC-Q100 qualification] |
| Amplifier Type | — | General Purpose |
| Number of Circuits | — | 2 circuits |
| Supply Voltage Range | — | Up to ±16 V (32 V total) |
| Common-Mode Input Voltage | — | Extends to ground/VEE |
| Supply Configuration | — | Single supply or split supply |
| Jumlah Pin | — | 8 pins |
| Output Current | — | [DATA_NEEDED: output current] |
| Lead-Free Status | — | [DATA_NEEDED: lead-free status] |