LM324MX vs LM324D Perbandingan
Perbandingan bersamaan detil LM324MX dari Texas Instruments dan LM324D dari Texas Instruments. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
Texas Instruments
LM324MX - Low Power Quad Op Amp, 3V-32V, 14-SOIC | Texas Instruments
LM324MX ✓ AktifTexas Instruments
LM324D - Quad 36V Op Amp | Texas Instruments | SOIC-14 (Tape & Reel)
LM324D ✓ AktifPerbandingan Spesifikasi
| Parameter Umum | LM324MX | LM324D |
|---|---|---|
| Merek | Texas Instruments | Texas Instruments |
| Kategori | Amplifier ICs | Amplifier ICs |
| Status Lingkungan Hidup | Aktif | Aktif |
| Number of Channels | 4 | — |
| Number of Amplifiers | 4 (quad) | 4 |
| Amplifier Type | Single-supply general-purpose operational amplifier, internally frequency compensated for unity gain | Quad general-purpose operational amplifier |
| Supply Voltage Range | 3 V to 32 V (or plus or minus 16 V dual supply) | 3 V to 36 V for B versions |
| Large DC Voltage Gain | 100 dB | — |
| Input Offset Voltage | 7 mV | Plus or minus 2 mV maximum for BA versions at 25 C |
| Common Mode Rejection Ratio (Min) | 65 dB | — |
| Input Bias Current | [DATA_NEEDED: input bias current] | [DATA_NEEDED: input bias current] |
| Input Common Mode Voltage Range | [DATA_NEEDED: input common mode voltage range] | — |
| Gain Bandwidth Product | [DATA_NEEDED: gain bandwidth product] | [DATA_NEEDED: gain bandwidth product] |
| Supply Current per Channel | [DATA_NEEDED: supply current per channel] | — |
| Output Voltage Swing | [DATA_NEEDED: output voltage swing] | — |
| Rentang Suhu Kerja | 0 C to +70 C | [DATA_NEEDED: operating temperature range] |
| Paket | 14-pin SOIC (surface mount) | 14-pin SOIC |
| Gaya Mounting | Surface Mount | — |
| Status RoHS | unknown | [DATA_NEEDED: RoHS status] |
| REACH Status | unknown | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | not_applicable | — |
| Level MSL | [DATA_NEEDED: MSL level] | — |
| Lead Finish / Lead-Free | [DATA_NEEDED: lead finish] | — |
| Architecture | — | Four independent high-gain frequency-compensated operational amplifiers |
| ESD Protection | — | 2 kV HBM for B, BA, and K versions |
| Input Filtering | — | Internal RF and EMI filter for B and BA versions |
| Supply Configuration | — | Single supply or split supply |
| Frequency Compensation | — | Internal |
| Tipe Mounting | — | Surface mount |
| Device Type | — | Low-power operational amplifier |
| Input Type | — | Differential input |
| Tipe Output | — | Single-ended output |
| Operating Class | — | Standard general purpose |
| AEC-Q100 Status | — | [DATA_NEEDED: AEC-Q100 qualification status] |
| Slew Rate | — | [DATA_NEEDED: slew rate] |
| Output Current | — | [DATA_NEEDED: output current] |
| Common-Mode Input Range | — | [DATA_NEEDED: common-mode input range] |
| Output Swing | — | [DATA_NEEDED: output swing] |