LM324NS vs LM324D Perbandingan
Perbandingan bersamaan detil LM324NS dari Texas Instruments dan LM324D dari Texas Instruments. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
Texas Instruments
LM324D - Quad 36V Op Amp | Texas Instruments | SOIC-14 (Tape & Reel)
LM324D ✓ AktifPerbandingan Spesifikasi
| Parameter Umum | LM324NS | LM324D |
|---|---|---|
| Merek | Texas Instruments | Texas Instruments |
| Kategori | Amplifier ICs | Amplifier ICs |
| Status Lingkungan Hidup | Aktif | Aktif |
| Number of Amplifier Circuits | 4 circuits | — |
| Device Type | Standard general-purpose operational amplifier | Low-power operational amplifier |
| Paket | 14-pin SOIC (14-SO) | 14-pin SOIC |
| Tipe Mounting | Surface mount | Surface mount |
| Supply Configuration | Single supply | Single supply or split supply |
| Supply Current Drain | 0.8 mA typical per amplifier | — |
| Supply Voltage Range | [DATA_NEEDED: minimum and maximum supply voltage] | 3 V to 36 V for B versions |
| Common-Mode Input Voltage Range | Includes ground | — |
| Input Offset Voltage | [DATA_NEEDED: input offset voltage] | Plus or minus 2 mV maximum for BA versions at 25 C |
| Input Bias Current | [DATA_NEEDED: input bias current] | [DATA_NEEDED: input bias current] |
| Open-Loop Voltage Gain | [DATA_NEEDED: open-loop voltage gain] | — |
| Unity-Gain Bandwidth | [DATA_NEEDED: unity-gain bandwidth] | — |
| Output Current | [DATA_NEEDED: output current capability] | [DATA_NEEDED: output current] |
| Output Voltage Swing | [DATA_NEEDED: output voltage swing] | — |
| Slew Rate | [DATA_NEEDED: slew rate] | [DATA_NEEDED: slew rate] |
| Input Noise Density | [DATA_NEEDED: input noise density] | — |
| Rentang Suhu Kerja | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| RoHS Compliance | [DATA_NEEDED: RoHS compliance statement] | — |
| REACH Compliance | [DATA_NEEDED: REACH compliance statement] | — |
| Amplifier Type | — | Quad general-purpose operational amplifier |
| Number of Amplifiers | — | 4 |
| Architecture | — | Four independent high-gain frequency-compensated operational amplifiers |
| ESD Protection | — | 2 kV HBM for B, BA, and K versions |
| Input Filtering | — | Internal RF and EMI filter for B and BA versions |
| Frequency Compensation | — | Internal |
| Input Type | — | Differential input |
| Tipe Output | — | Single-ended output |
| Operating Class | — | Standard general purpose |
| Status RoHS | — | [DATA_NEEDED: RoHS status] |
| REACH Status | — | [DATA_NEEDED: REACH status] |
| AEC-Q100 Status | — | [DATA_NEEDED: AEC-Q100 qualification status] |
| Gain Bandwidth Product | — | [DATA_NEEDED: gain bandwidth product] |
| Common-Mode Input Range | — | [DATA_NEEDED: common-mode input range] |
| Output Swing | — | [DATA_NEEDED: output swing] |